On Friday 12 April 2002 12:35, Jay opened a general hailing frequency and
transmitted to all open stations:
lemme rephrase, i know what services it is blocking, i want to see what
attempts it is loggiong as blocking. anyone know a good log monitoring
tool? picking through all those log
On Friday 12 April 2002 9:39 pm, shane wrote:
On Friday 12 April 2002 12:35, Jay opened a general hailing frequency and
transmitted to all open stations:
lemme rephrase, i know what services it is blocking, i want to see what
attempts it is loggiong as blocking. anyone know a good log
On Wed, 27 Feb 2002 09:28:22 -0800 (PST)
Paul Rodriguez [EMAIL PROTECTED] studiouisly spake these words to
ponder:
I asked this before, but I am still confused on this.
I set up internet connection sharing with DrakGW, and
set up a firewall on the gateway with Bastille. But
when I run
On 09 Feb 2002 11:14:37 -0500
Paul Rodríguez [EMAIL PROTECTED] studiouisly spake these words to
ponder:
How do I set up a firewall on my gateway which I setup via drakgw?
- Paul Rodriguez
Paul,
To get your firewall going use Tiny Firewall in Mandrake Control Center.
This will get
luck,
Jeroen v.d. Westelaken
-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]Namens Paul Rodríguez
Verzonden: zaterdag 9 februari 2002 3:20
Aan: newbie
Onderwerp: [newbie] bastille and gateway
Hi, when I set up my gateway via drakgw (Mandrake Control Center
How do I set up a firewall on my gateway which I setup via drakgw?
- Paul Rodriguez
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to
Hi, when I set up my gateway via drakgw (Mandrake Control Center) it
seems to do something funky with bastille? What exactly is happening,
is bastille turned off when drakgw starts working? How do I get them to
play nice?
- Paul Rodriguez
My installation runs LM 7.0. I've been reading
previous mails from newbie and expert lists and think Bastille will solve my
firewall and redirection problems. I'vebeen already advise to move into LM
8.1, but since this is a rather key installation want to make sure that there is
no way to
I am running Mandrake 8.1 and dual booting with WinME (temporarily, I
hope). I am on a cable modem and I run the Zone Alarm Pro firewall in
windows. ZA logs all attempts to access my machine in a text log.
I opted to install the Bastille firewall in Mandrake 8.1 and it works
very well as I
Todd Slater wrote:
When I try to run Interactive Bastille I get the following error:
Using Tk user interface module.
Only displaying questions relevant to the current configuration.
Can't locate Bastille_Tk.pm in @INC (@INC contains: /usr/lib
/usr/lib/perl5/5.6.1/i386-linux
On Monday 14 January 2002 08:58 pm, you wrote:
When I try to run Interactive Bastille I get the following error:
Using Tk user interface module.
Only displaying questions relevant to the current configuration.
Can't locate Bastille_Tk.pm in @INC (@INC contains: /usr/lib
At 08:37 PM 1/14/2002 -0500, Todd Slater wrote:
When I try to run Interactive Bastille I get the following error:
Using Tk user interface module.
Only displaying questions relevant to the current configuration.
Can't locate Bastille_Tk.pm in @INC (@INC contains: /usr/lib
Hello all,
I have lm8.0 running as a logon and print server.
I had Bastille configured and running ok sharing my dial up connection,
but since I had cable connected last week, everything works ok EXCEPT for
internet sharing. I have the cable modem on.eth0 and the LAN on eth1.
I have tried
Thanks to Skinky Dennis,
I've now used InteractiveBastille and checked www.grc.com and all ports show
as closed. A stealth scan at sygate shows all ports blocked except the
following so it would appear to be working (or nearly).
FTP 21 CLOSED SSH 22 CLOSED
SMTP 25 CLOSEDDNS 53
I have iptables installed, all the Bastille packages and used BastilleChooser
rather than baffle myself with InteractiveBastille, done a stealth scan at
http://scan.sygatetech.com which shows ports as closed rather than
stealth, I understand from previous posts that if Bastille is running
On Monday 10 December 2001 10:40, you wrote:
I have iptables installed, all the Bastille packages and used
BastilleChooser rather than baffle myself with InteractiveBastille, done a
stealth scan at http://scan.sygatetech.com which shows ports as closed
rather than stealth, I understand from
On Tuesday 11 December 2001 04:40, poogle wrote:
| I have iptables installed, all the Bastille packages and used
| BastilleChooser rather than baffle myself with InteractiveBastille, done
| a stealth scan at http://scan.sygatetech.com which shows ports as
| closed rather than stealth, I
On Monday 10 December 2001 22:01, you wrote:
I still don't consider ths a bug, I can get into the machine form any where
I choose, if I set it up to not allow me in as root via network or virutual
console (ALT+CTRL+f4) or SU. still works, just won't let a 'root user in
the wrong door. but I
Hi i get the following errors after doing a bastille-firewall-reset:
# bastille-firewall-reset
Setting up IP spoofing protection... done.
Allowing traffic from trusted interfaces... done.
Loading NAT modules... done.
Setting up masquerading rules... done.
Loading masquerading modules...insmod:
Hi, I need some help safely connecting to some file sharing networks. I
use Bastille and I'd like to connect to Gnutella (using gtk-gnutella).
As it stands I can connect search and download fine, but I can't seem to
share my files. How can I open up a connection safely? I'm hesitant to
just
Hello all,
Still trying to get Bastille configured correctly.
Does any one know what I have to change in the Bastille configuration
to allow dhcp to serve ip addresses to my win98 clients?
dhcp works ok until I start Bastille.
Hello all,
I was wondering if anyone can 'walk' me though seting up Bastille in
lm8.0.
My problem is, that if I run InteractiveBastille, my windows boxes no
longer get an ip address. I played with the bastille config file, but
then internet sharing stopped.
It seems I can have either a firewall
I'm sure this has been covered before, I appologize for that. But I
cannot connect to IRC through my Bastille Firewall (mostly default
settings). What parameters effect being able to connect to an IRC host?
Thanks a lot for your help.
-Paul Rodríguez
How embarrassing. Issue resolved. It was my fault, no firewall
problem.
-Paul Rodríguez
On Mon, 2001-10-22 at 12:44, Paul Rodríguez wrote:
I'm sure this has been covered before, I appologize for that. But I
cannot connect to IRC through my Bastille Firewall (mostly default
settings).
In reply to Paul Rodríguez's words, written 22 Oct 2001 12:44:26 -0400
You should open port 6667 and sometimes also 6668 and 7000.
I'm sure this has been covered before, I appologize for that. But I
cannot connect to IRC through my Bastille Firewall (mostly default
settings). What parameters
In reply to Paul's words, written 22 Oct 2001 12:59:31 -0400
How embarrassing. Issue resolved. It was my fault, no firewall
problem.
No worries. it is embarrassing when you have the answer in hand and still
can't fix it. ;)
Paul
--
If you drink to forget
Please pay in advance
(found in bar
Thanks, I think it was causing me trouble because of the mispelling. :)
-Paul Rodríguez
On Fri, 2001-10-19 at 06:46, Paul wrote:
In reply to Paul Rodriguez's words, written Thu, 18 Oct 2001 19:22:34 -0700
(PDT)
How important is adding pop-3 to the list of TCP
services to audit in
In reply to Paul Rodriguez's words, written Thu, 18 Oct 2001 19:22:34 -0700
(PDT)
How important is adding pop-3 to the list of TCP
services to audit in InteractiveBastille?
It would be pop3, and if you don't allow that to go through, you won't be able
to get mail from a pop3 server.
If you only
How important is adding pop-3 to the list of TCP
services to audit in InteractiveBastille?
-Paul Rodríguez
__
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
Want to buy your Pack or Services from
Hello:
Setting up the bastille firewall is turning into an adventure. Although I
pretty much having it do what I want, there are some nagging issues I am
hoping somebody can assist me.
1. Background info: Running LM8.0 in a dell 4100 series pc using an 800 mhz
pIII processor with 384meg
On Saturday 22 September 2001 01:57, you wrote:
On Fri, 21 Sep 2001 22:16:57 -0700, WCBaker [EMAIL PROTECTED] wrote:
Hi!
I used InteractiveBastille. Subsequently I could not go into a
terminal in a non-root account and log in as su. As soon as I enter
the correct password I get the
]
Subject: Re: [newbie] Bastille firewall
As root run logview, also accessible from the menu at Applicaions
Monitoring System Log Viewer.
Not sure about a write-as-you-go firewall scripter like ZoneAlarm.
-Paul Rodríguez
On 18 Sep 2001 11:35:39 -0400, Vinh N. Pham wrote:
How can I know
Hi!
I used InteractiveBastille. Subsequently I could not go into a terminal in
a non-root account and log in as su. As soon as I enter the correct
password I get the message File size limit exceeded. I don't think that
the log files could be so big (I only re-installed a few days ago and
The file size limit you are experiencing is a result of an option you
set Would you like to put limits on system resource usage? In the
past I have had to choose no in order to avoid the issue you are
experiencing.
-Paul Rodríguez
On 21 Sep 2001 22:16:57 -0700, WCBaker wrote:
Hi!
I used
How can I know whether my Bastille filewall is working at all. I can't
find any process when I do a ps aux that name bastille.
Seem to me (through what I see in the interactive setup) that Bastille
only block certain service Is there anything similar to ZoneLabs in
Window where I can
In reply to Vinh's words, written Tue, 18 Sep 2001 11:35:39 -0400
Bastille is a frontend to configure iptables.
If things are working you can tell by going su and running iptables -L
(capital l!)
Paul
How can I know whether my Bastille filewall is working at all. I can't
find any process
Hello All,
On my home LAN, I have set up LM8 on a p166 with 80M ram.
I use it for internet sharing, print sharing and domain logon.
(samba, DHCP) apache
I installed InteractiveBastille last night, but security is just a
little tight.
My windows boxes could not log on ping or print, but could
Hi folks,
Just got my firewall up with interactive bastille.
I only have a small problem: it is too good! When the firewall is up, I don't
get any SMTP mail from my provider anymore. So I have to go in with fetchmail
or shut down the firewall.
Can someone point me to the proper setting that I
Okay folks, already got it.
I only had to allow 'smtp', no need to futz with port numbers.
Paul
--
The biggest mistake is believing that there is one right way
to listen, to talk, to have a conversation - or a
relationship.
-Deborah Tannen
http://nlpagan.net - Registered Linux User 174403
I installed Mandrake 8.0 about a week ago and a
couple of days ago after a system crash it started showing problems when the
system starts up. I get all the way through the boot and the initial
startup to the point where the default console mode login displays; then the
system tries to
Once Bastille is installed, what is the executable name?!
--
Leif Madsen
'There are two possibilities.
Maybe we're alone.
Maybe we're not.
Both are equally frightening.'
[Attributed to either
Bertrand Russell or Isaac Asimov]
I reinstalled
Mandrake 8, straight out of he box i installed roaring penguin's pppoe version
3. Worked fine. Later I ran InteractiveBastille, configured my
system securiy. For some reason i can browse sites as root, but as user I
can only browse by ip address. I tried stopping Batille, and
I remember seeing this post a while back and thought nothing of it other
than that stinks. Well I installed Bastille myself and I have the same
problem. I can't log in as root.
At the graphical login screen, everything looks normal. I can log in to my
user account, no problem. I can su to root,
Hans N. wrote:
At the graphical login screen, everything looks normal. I can log in to my
user account, no problem. I can su to root, get into drakconfig, and all
that other good stuff. But, when I try to use the graphical login screen to
log in as root, I get a login failed message as if I
44 matches
Mail list logo
