using printer set-up in expert mode located the printer.
Thanks for the help everyone
Carlton
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
Mandrake Control Center Configured 99 USB printers on my system
I have 1
anyway to delete all the USB printers at on go so I can reinstall 1 and 1
only?
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Friday 25 February 2005 01:30 pm, Aron Smith wrote:
Mandrake Control Center Configured 99 USB printers on my system
I have 1
anyway to delete all the USB printers at on go so I can reinstall 1 and 1
only?
OK got them all uninstalled via MCC (manually and reinstalled my HPPSC 1210
Still
Hi all,
On my 9.2 box, I am trying to print to a network printer. I go
through the MCC and try and set up the printer. When it tries to
configure the printer, it comes back and tells me that it Failed to
Configure the printer. I am at a loss, because I have had this printer
set up before
Matthew Harrison wrote:
Hi all,
On my 9.2 box, I am trying to print to a network printer. I go
through the MCC and try and set up the printer. When it tries to
configure the printer, it comes back and tells me that it Failed to
Configure the printer. I am at a loss, because I have had this
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 22 March 2004 16:22, Matthew Harrison wrote:
Matthew Harrison wrote:
Hi all,
On my 9.2 box, I am trying to print to a network printer. I go
through the MCC and try and set up the printer. When it tries to
configure the printer,
I'm using Mandrake 9.1 with KDE 3.1.
Printer is an Epson Stylus Color 400.
Using OpenOffice 1.0.2.
Printed for the very first time in Linux. Set off the print job, and the
printer immediately started to print a load of rubbish - symbols , blamk
pages . And it won't stop - except when I push
On Friday 27 Jun 2003 3:54 am, Chris Knewstubb wrote:
I'm using Mandrake 9.1 with KDE 3.1.
Printer is an Epson Stylus Color 400.
Using OpenOffice 1.0.2.
Printed for the very first time in Linux. Set off the print job, and the
printer immediately started to print a load of rubbish - symbols
Dear Friends,
It is because of the printer buffer, although I did turn it off and on many
times and I haven't find any job outstanding mentioned below.
Thx,
Ongkie
From: Ongkie Singgih [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [newbie] Help!! my HP LaserJet
How come to set up your printer it does a test page perfect,
But when you go to print a page it prints nothing but jumbled rubbish
I tried all three print options still the same,
Also I did a buffer clean out with
lpq List jobs in the print queue.
lprm [job number] Remove job from printer
How come when you set up your printer, it does a perfect test page,
But when you go to print a page from a standard text page it prints nothing
but jumbled rubbish
I tried all three print options still the same,
Also I did a buffer clean out with
lpq List jobs in the print queue.
lprm [job
I had similar problems with my Canon 610. When I could get it to work, all it
would print is garbage. The problem lies with Canon. If you follow the link
I've posted you can read about my experience, And how it was solved.
It might help you as well.
On Friday 15 February 2002 18:14, Walter Logeman wrote:
Hi,
I had this printer working ok for a few days - now it stars
printing garbage as soon as it is no. it does not matter what
order I switch things on as soon as the printer is on in Linux
it begins to print garbage.
The problem is
skinky,
Its not a queued file is it? Try lpq to see if there are
any entries. Just a shot in the dark...
I have fixed it!
It meant killing a lot of lp processes under top as well as the
cupsd.
It was not a qued file - but it was still a file that was
constantly being told to print -
Hi,
I had this printer working ok for a few days - now it stars
printing garbage as soon as it is no. it does not matter what
order I switch things on as soon as the printer is on in Linux
it begins to print garbage.
The problem is not there in XP on the other side of the dual
boot!
Hello!
I have an installation problem with my Canon BJC-240. I have LM 7.2 on a
Pentium II MMX 350.
The machine says that CUPS has conflicts with printpro-4.1.2-1 But if
I try to uninstall the printpro archive I don't found it...
I need help, please.
If you needs some more specs, please let
On Tuesday 03 July 2001 20:31, baza486 wrote:
Hi,
can anyone help me get my HP Deskjet 500C printer working? I have
Mandrake 7.2 running on a 64meg PC (Packard Bell). According to
linuxPrinters.org it should work fine, but hardrake or config
printer can't get it working. If I run config
ark Weaver [mailto:[EMAIL PROTECTED]]
|Sent: Thursday, June 22, 2000 7:18 AM
|To: [EMAIL PROTECTED]
|Subject: Re: [newbie] printer problem
|
|
|try "lpd"
|
|--
|Mark
|
|I love my Linux Box!
| REASON #1 -- ...it's not Windows!
|Registered Linux user #1299563
|
|On Wed, 21 Jun 2000,
try "lpd"
--
Mark
I love my Linux Box!
REASON #1 -- ...it's not Windows!
Registered Linux user #1299563
On Wed, 21 Jun 2000, Pierre Rivier wrote:
Netscape expects a command to be able to print ...
What can I fill ?
lp doesn't work ...
thanks
Pierre
Paul wrote:
On Sun, 11
Eh, lpd is the daemon...
I believe you mean lpr...
But since output must be redirected... maybe it should be lpr -
-JMS
|-Original Message-
|From: Mark Weaver [mailto:[EMAIL PROTECTED]]
|Sent: Thursday, June 22, 2000 7:18 AM
|To: [EMAIL PROTECTED]
|Subject: Re: [newbie] printer
Netscape expects a command to be able to print ...
What can I fill ?
lp doesn't work ...
thanks
Pierre
Paul wrote:
On Sun, 11 Jun 2000, Leobardo Lpez wrote:
I Need Help.
Mandrake is Not Detecting My Mouse, What Can I Do to Configure It By Myself.
Do you have a serial mouse?
A bus
The other night while printing out a large file My niece shut down my
printer. When I turned it back on I started getting sheets with one
line printed on it. Looks like a self test. Problem is it wont stop
It's an HP ! Does anyone know what I can do to stop this?
Thanks
Hugh
--
QOTD:
hugh wrote:
The other night while printing out a large file My niece shut down my
printer. When I turned it back on I started getting sheets with one
line printed on it. Looks like a self test. Problem is it wont stop
It's an HP ! Does anyone know what I can do to stop this?
Thanks
I have a home built PC with a partitioned IDE drive and a 4 GB SCSI
drive. I've installed
Mandrake 6.1 in two places. A partition on the IDE drive and on the
SCSI drive. On the IDE
installation everything works fine (sound card, modem, printer).
However, on the SCSI
installation the printer
24 matches
Mail list logo
