Before I proceed, I would like to greet averyone on this list.
I am new to the list, so if I make any mistakes :
a. Bare with me
b. Tell me where I went wrong
Here goes my problem.
I've been having issues with mandrake 8.2 (tried to upgrade from
8.1), so I decided to install my freshly
Hello,
I have Mandrake 8.0 on my laptop (Compaq 1200) and have had no
problems for months. After a clean shutdown, I tried to log back in, but
my X server will not start. It has problems trying to set the FontPath to
unix/:-1. Has anyone experienced a problem like this before? What was the
On Sunday 05 May 2002 16:30, Keith Lynn opened a general hailing frequency
and transmitted to all open stations:
Hello,
I have Mandrake 8.0 on my laptop (Compaq 1200) and have had no
problems for months. After a clean shutdown, I tried to log back in, but
my X server will not start. It
I have installed LM8.0 on a Dell Latitude CPi 400CT. This laptop has a MagicGraph 256ZX graphic adapter.Every time I start X I get an error message saying 16bpp not supported on this chipset (or 24 or whatever I choose).
I am aware that laptops are special, but I got it to work in LM7.2 (and
i have put it on fbdev and it works fine.
my monitor is set up exactly to the spesifications in the manual, it is a
brnd new monitor! its fine!
X starts up fine, but when your in x you cannot switch to auora, console, or
even logout? without it freezeing up.
I have a diamond stealth 2, with 4m. 400mhz AMD K6-2, 64mb of ram. (I have
got 64mb spare but i'm sure wheather it works ok, because it didn't seem to
go in win98?)
Does anyone
hi i was wanting to know what file i have to edit for this problem i
have
each time i start any program from console i get this message
Xlib: connection to ":0.0" refused by server
Xlib: Client is not authorized to connect to Server
GtK-WARNING **: cannot open display: :0
i know how to fix
What's your video card ?
Pablo Monti
Buenos Aires, Argentina
- Original Message -
From: Anderson A. eMiranda [EMAIL PROTECTED]
To: Newbie Mandrake [EMAIL PROTECTED]
Sent: Sunday, November 14, 1999 12:17 PM
Subject: [newbie] X problems
I try config X with generic VGA, with generic
I got a serious problem with X when I make a new instalation of Mandrake
6.1. I installed it on a machine with a previous Mandrake 6.0, working fine
with X - KDE.
When I got my Mandrake 6.1 CD I backuped my machine and I formatted it and
make a full instalation of 6.1 (with all packages). All
I try config X with generic VGA, with generic monitor at 640x480, 8 bits and
not works. I try installing from another CD, nothing
Pls help
Anderson
All process was ok. But
when I tried config X, after choose my video board (trident 975image AGP)
and the correct monitor (custom - The same setup I made with 6.0) and when
the sistem try to run the test, I only get a blank screen with white lines
on top (sometimes when I move the mouse, this
On Sun, 14 Nov 1999, you wrote:
I got a serious problem with X when I make a new instalation of Mandrake
6.1. I installed it on a machine with a previous Mandrake 6.0, working fine
with X - KDE.
When I got my Mandrake 6.1 CD I backuped my machine and I formatted it and
make a full
On Sun, 14 Nov 1999, you wrote:
I try config X with generic VGA, with generic monitor at 640x480, 8 bits and
not works. I try installing from another CD, nothing
You haven't given enough info.
What video card, what processor, how much RAM, etc.
John
On Wed, 06 Oct 1999, you wrote:
I have a Logitec 2 button FirstMouse set up to emulate 3 buttons. I
have also tried the mouse without 3 button emulation with no luck.
I am going to try upgrading to XFree86-3.3.5 since mandrake 6.0
uses 3.3.3.1; hopefully, this may help resolve my problem.
On Wed, 06 Oct 1999, Tom wrote:
I've got a Logitech 2 button psu, no problems. I believe
a lot of the mouse problems I keep reading about on this list and
the NG's, might just well be motherboard issues as the mouse itself.
I buy keyboards and mice for $5-$10 each, when they start to
, I came up with an interesting solution to my X problem, by
way of a friend with more linux experience than i (and that don't
take much!). He suggested that i try another distro since i had no
huge time or data invested with Linux-Mandrake. I used his Red
Hat 6.0 disk from cheapbytes.com
On Tue, 05 Oct 1999, you wrote:
I have successfully installed linux-mandrake 6.0 on my system, a
200 mHz pentium with a S3 ViRGE/ VX video card (4MB memory)
and a Mag Innovision DX1795 monitor.
Autoprobing successfully identifies the video card, and i then select
the DX1795 monitor. the
I have a Logitec 2 button FirstMouse set up to emulate 3 buttons. I
have also tried the mouse without 3 button emulation with no luck.
I am going to try upgrading to XFree86-3.3.5 since mandrake 6.0
uses 3.3.3.1; hopefully, this may help resolve my problem.
scott
I have successfully installed linux-mandrake 6.0 on my system, a
200 mHz pentium with a S3 ViRGE/ VX video card (4MB memory)
and a Mag Innovision DX1795 monitor.
Autoprobing successfully identifies the video card, and i then select
the DX1795 monitor. the Xconfig test states that i can use
]
To: [EMAIL PROTECTED]
Sent: Tuesday, October 05, 1999 5:49 PM
Subject: [newbie] X problems
I have successfully installed linux-mandrake 6.0 on my system, a
200 mHz pentium with a S3 ViRGE/ VX video card (4MB memory)
and a Mag Innovision DX1795 monitor.
Autoprobing successfully identifies
21 matches
Mail list logo
