Am 20.04.10 17:16, schrieb R. Bastian:
2. i wish that
\NC 1 \NC \NC
WOULD be something like
\NC \TWO \center{1} \NC
\NC \TWO \ReFormat[c]{1} \NC ?
ok, which is the max ? EIGHT does not work ...
The names are limited from \ONE to \SIX but with the \use command there
is no lim
On Tue, 20 Apr 2010 15:37:06 +0200
Wolfgang Schuster scribit:
> Am 20.04.10 11:39, schrieb R. Bastian:
> > Hello,
> >
> > in the following example (context iv):
> >
> > 1. \setuptable[rulethickness=0.04em] does not work
> >
> \setuptables[...]
ok, but i am using 'table' ;-)
> > 2. i wish th
Am 20.04.10 11:39, schrieb R. Bastian:
Hello,
in the following example (context iv):
1. \setuptable[rulethickness=0.04em] does not work
\setuptables[...]
2. i wish that
\NC 1 \NC \NC
WOULD be something like
\NC \TWO \center{1} \NC
\NC \TWO \ReFormat[c]{1} \NC ?
\enableregime[utf]
\s
Hello,
in the following example (context iv):
1. \setuptable[rulethickness=0.04em] does not work
2. i wish that
\NC 1 \NC \NC
WOULD be something like
\NC \TWO \center{1} \NC
?
-
\enableregime[utf]
\setup
> \define[1]\divisionrule
> {\dontleavehmode\blap
> {\vskip-\strutht
> \blackrule[width=\the\dimexpr.5em*#1\relax,height=2\linewidth]}%
> \vskip-\lineheight}
Ahh! Yes, this helps a lot.
Thank you very much!
Wolfgang
_
Am 17.04.10 16:59, schrieb Wolfgang Schuster:
Am 17.04.10 11:35, schrieb Wolfgang Werners-Lucchini:
I have to typeset a division …
\setuplines[style=type]
\startlines
...
\stoplines
\stoptext
\definelines[division][style=type,space=on]
You don't even need a typewriter font for this:
\define
Am 17.04.10 11:35, schrieb Wolfgang Werners-Lucchini:
I have to typeset a division …
\setuplines[style=type]
\startlines
110011:11=10001
11
--
~00
~00
~--
~~00
~~00
~~--
~~~01
~~~00
~~~--
11
11
--
~0
\stoplines
\stoptext
\define[1]\divisionrule
{\dontleavehmode\blap
{\vskip-
Am 17.04.10 11:35, schrieb Wolfgang Werners-Lucchini:
Hallo,
I have to typeset a division and have two diverent solutions but they
both have problems.
\setuplines[style=type]
\startlines
110011:11=10001
11
...
~0
\stoplines
\stoptext
\setuplines[style=type,space=on]
\startlines
\formul
Hallo,
I have to typeset a division and have two diverent solutions but they
both have problems.
%-
\starttext
{\setuptables[rulethickness=0.05em,distance=small]
\starttable[s0|r|r|r|r|r|r|r|r|r|r|r|r|r|r|r|r|]
\NC\NC 1\NC 1\NC
Hi!
Thanks Mario and Wolfgang.
The \placelist command solved both problems.
Alain
Wolfgang Schuster a écrit :
Am 21.03.10 10:18, schrieb Alain Delmotte:
Hi!
I have two question about table of contents.
1) is it possible to have the toc at the end of the document.
I tried to place \placecont
Hello!
On Sun, Mar 21, 2010 at 11:18 AM, Alain Delmotte
wrote:
> 2) If I define my own header (like in ConTeXt an excursion: 5. Headers) and
> so, for example, replacing \section by \myheader, which has a section level,
> the table of content is empty!
I have a working system like that in sever
Am 21.03.10 10:18, schrieb Alain Delmotte:
Hi!
I have two question about table of contents.
1) is it possible to have the toc at the end of the document.
I tried to place \placecontent or \completecontent at the end and it
didn't work; I only managed to have the toc at the beginning of the
do
Hi!
I have two question about table of contents.
1) is it possible to have the toc at the end of the document.
I tried to place \placecontent or \completecontent at the end and it
didn't work; I only managed to have the toc at the beginning of the
document.
2) If I define my own header (like
On Sat, Mar 6, 2010 at 03:22, wrote:
>
> And Google
> is very bad in finding context material.
There's a Google "special search" on the wiki that should be able to
search through the relevant material only.
Mojca
__
> "Mari" == Mari Voipio writes:
Mari> ...been there, done that
Mari> (http://wiki.contextgarden.net/Imposition#Caveat:_common_troubles)
And I had looked at that page, but obviously not seen it. And Google
is very bad in finding context material.
Thanks all!
--
Cheers,
Berend
On Fri, Mar 5, 2010 at 11:50 PM, Thomas A. Schmitz
wrote:
> run context or texexec with the switch --arrange.
If you have a SciTe-ConTeXt system, do "Process and arrange" in the
Tools many instead of just "Process", to get your indices and other
tables back.
...been there, done that
(http:/
On Mar 5, 2010, at 10:33 PM, ber...@pobox.com wrote:
> Hi People,
>
> I have a very weird problem. As soon as I star tot use \setuparranging
> the table of contents and other registers disappear. How to fix that?
Hi Berend,
run context or texexec with the switch --arrange.
HTH
Thomas
___
Hi People,
I have a very weird problem. As soon as I star tot use \setuparranging
the table of contents and other registers disappear. How to fix that?
An example file:
--
\setuppapersize
[A5][A4]
\setuparranging
[2SIDE,rotated]
\starttext
\
Thank you Aditya and Wolfgang,
I will try it both:
> No page breaks possible:
>
> \defineframedtext[tablebox][frame=off,width=\hsize,offset=0pt,before
> =,after=]
>
> \starttext
>
> vorher
>
> \startnarrower
>
> text
>
> \starttablebox
> \starttable[s0|l|]
> \NC table entry \NC\AR
> \stopta
Am 27.02.10 20:40, schrieb Wolfgang Werners-Lucchini:
If there is really no solution, I will make something with an empty
first column.
No page breaks possible:
\defineframedtext[tablebox][frame=off,width=\hsize,offset=0pt,before=,after=]
\starttext
vorher
\startnarrower
text
\starttablebo
On Sat, 27 Feb 2010, Wolfgang Werners-Lucchini wrote:
Hallo,
But how can I get my 3cm?
If you do not use horizontal lines
\starttable[o(3cm)|l|]
Aditya
Not horizontal lines, but a gray header:
\starttable[o(3cm)|l|]
\RL\SR
\NC hmm \NC\AR
\stoptable
Thank you Aditya for this workar
Hallo,
> > But how can I get my 3cm?
>
> If you do not use horizontal lines
>
> \starttable[o(3cm)|l|]
>
> Aditya
>
Not horizontal lines, but a gray header:
\starttable[o(3cm)|l|]
\RL\SR
\NC hmm \NC\AR
\stoptable
Thank you Aditya for this workaround.
If there is really no solution, I wi
On Fri, 26 Feb 2010, Wolfgang Werners-Lucchini wrote:
Thank you Taco,
I want some space on the left of \start\stoptables. What I get is
SOME space, but not that what I wanted!
---
\starttext vorher
\setupnarrower[left=3cm]
\startnarrower[left]
\starttables[|l|]
Where
Thank you Taco,
> > I want some space on the left of \start\stoptables. What I get is
> > SOME space, but not that what I wanted!
> >
> > ---
> > \starttext vorher
> > \setupnarrower[left=3cm]
> > \startnarrower[left]
> > \starttables[|l|]
> >
> > Where is that littl
Hallo,
> > I want some space on the left of \start\stoptables. What I get
> is
> > SOME space, but not that what I wanted!
> >
> \starttabulate[|l|]
> \NC hmm \NC\NR
> \stoptabulate
>
> Wolfgang
Does this mean, that there is no solution with \start\stoptables?
Wolfgang
_
Am 25.02.10 23:24, schrieb Wolfgang Werners-Lucchini:
Hallo,
I asked this question some times before
but I can't remember if I got some answers. Sorry!
I want some space on the left of \start\stoptables. What I get is
SOME space, but not that what I wanted!
\starttabulate[|l|]
\NC hmm \NC\
Wolfgang Werners-Lucchini wrote:
Hallo,
I asked this question some times before
but I can't remember if I got some answers. Sorry!
I want some space on the left of \start\stoptables. What I get is
SOME space, but not that what I wanted!
---
\starttext vorher
\setupn
Hallo,
I asked this question some times before
but I can't remember if I got some answers. Sorry!
I want some space on the left of \start\stoptables. What I get is
SOME space, but not that what I wanted!
---
\starttext vorher
\setupnarrower[left=3cm]
\startnarrower[le
On Fri, 29 Jan 2010, R. Bastian wrote:
Hello,
I wish to align horizontally a table at the middle of \textwidth.
without "Table xx.y".
\placetable[here,none]{}{\starttable ... \stoptable}
or
\midaligned{\starttable ... \stoptable}
My environment:
Debian/Gnome
Context mkii
Snow : 11cm, Te
Hello,
I wish to align horizontally a table at the middle of \textwidth.
without "Table xx.y".
All the examples I found were left aligned.
My environment:
Debian/Gnome
Context mkii
Snow : 11cm, Temperature : 3.2 Celsius
Please, what is the trick ?
--
René Bastian
www.pythoneon.org
www.musiqu
> The best I can do.
Thanks Wolfgang. At first glance, it appears to cover the essentials.
I'll need to hack on it for a few days to test the minor requirements that
aren't so obvious in the sample PDF, but this gets me going again.
A particular advantage (if I'm interpreting this layout correct
Am 06.12.2009 um 03:53 schrieb Design Department:
> The main point is that the tabular material runs from just a single to
> several hundred rows and each page *must* contain both the header and footer
> explanations associated with the table. Normally the pages are broken at a
> fixed increme
On 2009-12-05, at 7:55 AM, Wolfgang Schuster wrote:
>
> Am 04.12.2009 um 22:58 schrieb Design Department:
>
>> Earlier this year I attempted to set tabular material using ConTeXt while
>> meeting *all* the following requirements:
>>> Some columns need fixed width, content must wrap to multiple
Am 05.12.2009 um 18:47 schrieb Design Department:
>> Can you show a example from the LaTeX output.
>
> If I remove a few sensitive items I can generate a sample PDF. Is this what
> you mean, Wolfgang?
Yes
> I've never seen attachments in mailing list - is that allowed? I could also
> include
On 2009-12-05, at 7:55 AM, Wolfgang Schuster wrote:
>
> Am 04.12.2009 um 22:58 schrieb Design Department:
>
>> Earlier this year I attempted to set tabular material using ConTeXt while
>> meeting *all* the following requirements:
>>> Some columns need fixed width, content must wrap to multiple
Am 04.12.2009 um 22:58 schrieb Design Department:
> Earlier this year I attempted to set tabular material using ConTeXt while
> meeting *all* the following requirements:
>> Some columns need fixed width, content must wrap to multiple lines
>> Multi-page tables
>> Column headings must repeat on e
Earlier this year I attempted to set tabular material using ConTeXt while
meeting *all* the following requirements:
> Some columns need fixed width, content must wrap to multiple lines
> Multi-page tables
> Column headings must repeat on every page
> Additional header information is requir
Thank you Willi, this gives the result I want. Best regards,
Robert Blackstone
On Wed, Jul 8, 2009 at 5:47 PM, Willi Egger wrote
>
>
> Hi,
>
> the subjects and susubjects will not end up in a TOC. Use section and
> subsection. Add a \setuphead[section,subsection][number=no], place
> the TOC with
Hi,
the subjects and susubjects will not end up in a TOC. Use section and
subsection. Add a \setuphead[section,subsection][number=no], place
the TOC with \completecontent.
Willi
On Jul 8, 2009, at 1:33 PM, Robert Blackstone wrote:
Hi all,
I am struggling, vainly so far, with "list" and "
Am 08.07.2009 um 13:33 schrieb Robert Blackstone:
Hi all,
I am struggling, vainly so far, with "list" and "combinedlist", and
I hope someone can help me.
What I want to do is the following: I am making a bilingual version
om some old German text, adding an English translation. As in the
o
Hi all,
I am struggling, vainly so far, with "list" and "combinedlist", and I
hope someone can help me.
What I want to do is the following: I am making a bilingual version om
some old German text, adding an English translation. As in the
original German version, I want to use unnumbered chap
Hi,
the following code, coming straight from
http://wiki.contextgarden.net/Table#Background_Colors , doesn't
compile with mkiv.
Cheers,
Nicolas
\setupcolors[state=start]
\starttable[|l|l|]
\HL
\BL[1]\SR
\NC Command \NC Meaning \NC\SR
\HL
\NC \tex{NC}\NC next column \NC\FR
\NC \tex{NR}
Found it. Thanks again.
I had read it some time ago, but it didn't fully register then - I
think I was hoping to use natural tables at the time.
--
david
___
If your question is of interest to others as well, please a
Am 14.04.2009 um 19:17 schrieb Design Department:
Is alignmentcharacter available in table macros other than natural
tables?
http://wiki.contextgarden.net/Tables_Overview
Wolfgang
There is no mention of alignmentcharacter anywhere other than for
natural tables, but the wiki is hardly compr
> No, because ConTeXt has no dimension with the name \pagewidth, you couls
> use \textwidth for the width of the textblock. Even then your setup is
> useless because your table is wider than 2/3 of the textwidth (it is even
> wider than the complete textblock).
Thks. I must have been lost in space
>> Is alignmentcharacter available in table macros other than natural tables?
>
> http://wiki.contextgarden.net/Tables_Overview
> Wolfgang
There is no mention of alignmentcharacter anywhere other than for
natural tables, but the wiki is hardly comprehensive.
That's why I'm asking here.
--
david
Am 14.04.2009 um 18:53 schrieb Design Department:
Is alignmentcharacter available in table macros other than natural
tables?
http://wiki.contextgarden.net/Tables_Overview
Wolfgang
___
If your question is of in
Is alignmentcharacter available in table macros other than natural tables?
I would prefer to use natural tables but absolutely require a footer
at the bottom of the table on every page.
The footer doesn't need to contain columns - it can be a box the width
of the table.
Any suggestions on achievi
Am 13.04.2009 um 21:31 schrieb Design Department:
The table flows into, and off the right margin area. What am I doing
wrong?
Also, \SetTableToWidth{.67\pagewidth} produces an error. Is there a
way to specify a fraction of \pagewidth?
No, because ConTeXt has no dimension with the name \page
Hi all,
I need a table that is 2/3 \pagewidth and placed against the right page margin.
\SetTableToWidth{6in}
\setuptables[split=repeat]
\starttablehead
\NC Description \NC Quantity \NC Units \NC Rate \NC Amount \NC \NR
\HL
\stoptablehead
\starttabletail
\NC \SL This ticket is not an invoice. Pay
Wolfgang Schuster googlemail.com> writes:
>
> On Wed, Aug 13, 2008 at 9:29 PM, city.ac.uk> wrote:
> > Hi,
> >
> > Is it possible to do this? As in the "Chance this" and "To this"
> > headings are repeated on the top of each page
> >
> > Beware the images are big;
> >
> > -http://imagebin.org/
On Wed, Aug 13, 2008 at 9:29 PM, <[EMAIL PROTECTED]> wrote:
> Hi,
>
> Is it possible to do this? As in the "Chance this" and "To this" headings
> are repeated on the top of each page
>
> Beware the images are big;
>
> -http://imagebin.org/24166
> -If the above doesn't work; http://imagebin.ca/view
Hi,
Is it possible to do this? As in the "Chance this" and "To this" headings
are repeated on the top of each page
Beware the images are big;
-http://imagebin.org/24166
-If the above doesn't work; http://imagebin.ca/view/LWZdNWP5.html
Thanks
Mohamed Bana
__
Ok Hans. Looking forward to these improvements.
>hm, maybe later, when i redo that code (i never use bookmarks so i
>hardly test that code)
It's the same with table of contents hyperlink jumps. Quite annoying because
lots of people are used to the behavior of word/openoffice generated pdfs.
Now
Alan Stone wrote:
> Got fed up with context/xetex... Compiled with
> texmfstart texexec --lua instead and as expected
> (from a previous thread) bookmarks are scrambled
> when using accented (french) characters.
> Hope this (luatex) issue will be resolved very soon.
should work with the beta
> C
Got fed up with context/xetex... Compiled with
texmfstart texexec --lua instead and as expected
(from a previous thread) bookmarks are scrambled
when using accented (french) characters.
Hope this (luatex) issue will be resolved very soon.
Thanks for the backward compatibility though. Didn't
have
Hi,
When compiling the same source but with different compiler options...
(1) compiled with texmfstart texexec --autopdf --pdf test.tex
(2) compiled with texmfstart texexec --xtx test.tex or
texmfstart texexec --xetex test.tex
All hyperlinks ( table of contents and bookmarks ) jump to the
corre
On Wed, Jun 25, 2008 at 10:13 AM, Alan Stone
<[EMAIL PROTECTED]> wrote:
> this works...
>
> \setuplist[chapter][
> style=bold,
> aligntitle=yes,
> after=\blank] <--- that's too much vertical blank space
>
> this doesn't...
>
> \setuplist[chapter][
> style=bold,
> al
Tested and confirmed. :O)
Thanks Thomas.
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage
Alan Stone wrote:
> this works...
>
> \setuplist[chapter][
> style=bold,
> aligntitle=yes,
> after=\blank] <--- that's too much vertical blank space
>
> this doesn't...
>
> \setuplist[chapter][
> style=bold,
> aligntitle=yes,
> after=\blank[small]]
>
> stran
On Jun 25, 2008, at 10:13 AM, Alan Stone wrote:
> this doesn't...
>
> \setuplist[chapter][
> style=bold,
> aligntitle=yes,
> after=\blank[small]]
try
\setuplist[chapter][
style=bold,
aligntitle=yes,
after={\blank[small]}]
(untested)
Thomas
___
this works...
\setuplist[chapter][
style=bold,
aligntitle=yes,
after=\blank] <--- that's too much vertical blank space
this doesn't...
\setuplist[chapter][
style=bold,
aligntitle=yes,
after=\blank[small]]
strange ( see log in attachement ), or not ?
alan
Am 2008-04-29 um 13:27 schrieb Wolfgang Schuster:
> \setuplist
> [chapter,section,...]
> [numbercommand=\DotAfterNumber]
>
> \def\DotAfterNumber#1{\doiftext{#1}{#1.}}
Just wikified that:
http://wiki.contextgarden.net/Table_of_Contents
Greetlings from Lake Constance!
Hraban
---
http://www.fie
>
Hi Wolfgang! It works impeccably! Thanks a lot for your help!
> \setuplist
> [chapter,section,...]
> [numbercommand=\DotAfterNumber]
>
> \def\DotAfterNumber#1{\doiftext{#1}{#1.}}
___
If your question is of inte
> Thanks a lot for your answer!
>
> However, I have no idea why, but I still get:
>
> . Preamble
> 1. ChapterOne
> 1.1. Section
Seems ConTeXt is not testing if there is there is no number, you could
modify your first solution.
\setuplist
[chapter,section,...]
[numbercommand=\DotAfterNu
>
Hi Wolfgang!
Thanks a lot for your answer!
However, I have no idea why, but I still get:
. Preamble
1. ChapterOne
1.1. Section
With the stopper being displayed even when there is no number! And I
am 100% sure this doesn't come from somewhere else, because if I set
stoper={ppp}, I g
On Tue, Apr 29, 2008 at 11:23 AM, Noé Cuneo <[EMAIL PROTECTED]> wrote:
> Hi all,
>
> I've been using ConTeXT for quite a while now, and I am trying to
> build my own customized environnment.
>
> I have some trouble customizing my content table. I tried everything I
> could, including reading the ma
Hi all,
I've been using ConTeXT for quite a while now, and I am trying to
build my own customized environnment.
I have some trouble customizing my content table. I tried everything I
could, including reading the manual twice over, and I still can't
figure out why none of my ideas will work!
Hello,
I'm using ConTeXt as part of an XML->PDF workflow that is heavy on tables. The
XML table model allows cells to span rows and columns. While ConTeXt has
handled row/column spanning perfectly up to this point, I believe I have found
an issue. When an entry that spans multiple rows is o
On Nov 9, 2007 10:50 AM, Wolfgang Schuster <[EMAIL PROTECTED]>
wrote:
> 2007/11/7, Peter Rolf <[EMAIL PROTECTED]>:
> > Wolfgang Schuster schrieb:
>
What about this ?
tabulate spec
\def\PRETABRULE{%
%\vrule width1pt height \strutht depth \strutdp%
\ifnum\tabulatecolumn=0%
\rlap{\raise\struth
Hi Wolfgang,
nice patch. I just looked at the comparison of the table type
(http://wiki.contextgarden.net/Tables_Overview). There it says:
tabulate problems: very limited
Add some more stuff and we can change this to 'limited' ;)
Best wishes, Peter
Wolfgang Schuster schrieb:
> 2007/11/7, Pete
2007/11/7, Peter Rolf <[EMAIL PROTECTED]>:
> Wolfgang Schuster schrieb:
> >
> > Hi Peter,
> >
> > your solution would be really a option but I hope the real bugs will be
> > fixed,
>
> I see :)
>
> So things could be worse. You have
>
> - a workaround (?)
> - a complete minimal description/exampl
Wolfgang Schuster schrieb:
>
> Hi Peter,
>
> your solution would be really a option but I hope the real bugs will be
> fixed,
I see :)
So things could be worse. You have
- a workaround (?)
- a complete minimal description/example of the problem (as starting
point for Hans)
- some good hints
2007/11/7, Peter Rolf <[EMAIL PROTECTED]>:
>
> Wolfgang Schuster schrieb:
> >
> > Hi Peter,
> >
> > your solution would be really a option but I hope the real bugs will be
> > fixed,
>
> I see :)
>
> So things could be worse. You have
>
> - a workaround (?)
you mean your solution with a self defi
2007/11/6, Peter Rolf <[EMAIL PROTECTED]>:
>
> Hi Wolfgang,
>
> what a nice 'minimal' example :)
>
> I'm no table expert, not even an experienced table user. Anyhow, I think
> that table is the best choice here. Aside from the bad placing of the
> horizontal rules, all is working. This is much more
Hi Wolfgang,
what a nice 'minimal' example :)
I'm no table expert, not even an experienced table user. Anyhow, I think
that table is the best choice here. Aside from the bad placing of the
horizontal rules, all is working. This is much more than you can say
from the other candidates.
How about d
Hi,
I try currently to write a table with a repeated header on all pages and
rules above and below the header
and another rule below the table on all pages. I tried this now with all
tables in ConTeXt but I can't the
desired result from any of them.
Tabulate has problems with rule below the heade
On Sat, 21 Jul 2007 01:19:24 +0200
"Wolfgang Werners-Lucchini" <[EMAIL PROTECTED]> wrote:
> Hallo,
>
> I have two problems/questions with the following tables:
>
> 1. Should'nt all the columns be .2\textwidth, as in the last table?
> 2. Why expands column width to \textwidth in the second table?
Hallo,
I have two problems/questions with the following tables:
1. Should'nt all the columns be .2\textwidth, as in the last table?
2. Why expands column width to \textwidth in the second table?
Has to do with \type{} and/or color!
3. Why behaves table 1 (with \type{}) as table 3 (whitout \typ
I've a long TABLE in a 2-columns environment.
Is it possible to split the table (if needed) at discrete rows?
At the moment the left columns contains some text, about the half of
the following table would fit in, but starts on top of the right
column and is broken onto the next page. Further i
Horacio Suarez wrote:
> Hello:
>
> When I use (just for saving paper and print time)
>
> \setuparranging[2UP]
>
> o
>
> \setuparranging[2SIDE]
>
> my table of content is empty, just the header (Indice) appears in that page.
> But if I don't use any arranging the TOC it's ok.
>
> I can print the TO
Hello:
When I use (just for saving paper and print time)
\setuparranging[2UP]
o
\setuparranging[2SIDE]
my table of content is empty, just the header (Indice) appears in that page.
But if I don't use any arranging the TOC it's ok.
I can print the TOC alone, but I want to know if I'm doing som
On Fri, 9 Feb 2007 14:38:51 +0100
Steffen Wolfrum <[EMAIL PROTECTED]> wrote:
> Hi,
>
> looking through enattab and this list's archive I saw that we have …
>
> \bTABLE[option=stretch]
>
> … to make a table wide as textwidth, and …
>
> \setupTABLE[column][1][width=.5\hsize]
>
> … to make the f
Hi,
looking through enattab and this list's archive I saw that we have …
\bTABLE[option=stretch]
… to make a table wide as textwidth, and …
\setupTABLE[column][1][width=.5\hsize]
… to make the first column half of textwidth.
Now, I want to have the *entire* table scaled .75 of textwidth (set
On Fri, 01 Dec 2006 21:40:34 +0100 (CET)
Peter Münster <[EMAIL PROTECTED]> wrote:
Hi Peter
> Hello,
>
> with the latest ConTeXt, it seems, that space around \bTR, \eTR, before
> \bTD and after \eTD matters. Such space seems to move the whole TABLE to
> the right:
>
> \def\XXX#1{\bTR\bTD#1\eTD\e
Hello,
with the latest ConTeXt, it seems, that space around \bTR, \eTR, before
\bTD and after \eTD matters. Such space seems to move the whole TABLE to
the right:
\def\XXX#1{\bTR\bTD#1\eTD\eTR}
\starttext
\centerline{\bTABLE\dorecurse{2}{\XXX{bla}}\eTABLE}
\centerline{\bTABLE\dorecurse{2}{\XXX{bl
> \let\beforeTABLEsplitbox\relax
> \let\afterTABLEsplitbox \relax
> \let\beforeTABLEbox \relax
> \let\afterTABLEbox \relax
>
> you can play with these macros since they are the formal hooks
Hans,
I played with
\let\beforeTABLEsplitbox\dontleavehmode
\def\afterTABLEsplitbox{\relax\dontl
Duncan Hothersall wrote:
> I said:
>
>
>> \starttext
>> \startitemize[n,broad]
>> \item Hello world!
>> \bTABLE\bTR\bTD Little\eTD \bTD table\eTD\eTR\eTABLE
>> First item continues.
>> \item Second item.
>> \stopitemize
>> \stoptext
>>
>
> What I *meant* (sorry!) was
>
> \starttext
> \start
Duncan Hothersall wrote:
> Very simple question which has suddenly stumped me:
>
> \starttext
> \startitemize[n,broad]
> \item Hello world!
> \bTABLE\bTR\bTD Little\eTD \bTD table\eTD\eTR\eTABLE
> First item continues.
> \item Second item.
> \stopitemize
> \stoptext
>
> How to get the TABLE inside
I said:
> \starttext
> \startitemize[n,broad]
> \item Hello world!
> \bTABLE\bTR\bTD Little\eTD \bTD table\eTD\eTR\eTABLE
> First item continues.
> \item Second item.
> \stopitemize
> \stoptext
What I *meant* (sorry!) was
\starttext
\startitemize[n,broad]
\item Hello world!
\bTABLE[split=yes]\bT
Very simple question which has suddenly stumped me:
\starttext
\startitemize[n,broad]
\item Hello world!
\bTABLE\bTR\bTD Little\eTD \bTD table\eTD\eTR\eTABLE
First item continues.
\item Second item.
\stopitemize
\stoptext
How to get the TABLE inside the first item to align with the item
content,
Wolfgang Schuster wrote:
> On Sun, 01 Oct 2006 22:42:03 +0100
> Sanjoy Mahajan <[EMAIL PROTECTED]> wrote:
>
>
>> I'd seen a similar problem but didn't manage to catch it before it
>> slithered away. But I'm pretty sure it used to work (perhaps with an
>> August 06 release).
>>
>> Starting from
On 10/2/06, John R. Culleton wrote:
> On Monday 02 October 2006 13:07, Wolfgang Schuster wrote:
> > On Sun, 01 Oct 2006 22:42:03 +0100
> >
> > Sanjoy Mahajan <[EMAIL PROTECTED]> wrote:
> > > I'd seen a similar problem but didn't manage to catch it before it
> > > slithered away. But I'm pretty sur
On Monday 02 October 2006 13:07, Wolfgang Schuster wrote:
> On Sun, 01 Oct 2006 22:42:03 +0100
>
> Sanjoy Mahajan <[EMAIL PROTECTED]> wrote:
> > I'd seen a similar problem but didn't manage to catch it before it
> > slithered away. But I'm pretty sure it used to work (perhaps with an
> > August 06
On Sun, 01 Oct 2006 22:42:03 +0100
Sanjoy Mahajan <[EMAIL PROTECTED]> wrote:
> I'd seen a similar problem but didn't manage to catch it before it
> slithered away. But I'm pretty sure it used to work (perhaps with an
> August 06 release).
>
> Starting from your example, the following was the sma
I'd seen a similar problem but didn't manage to catch it before it
slithered away. But I'm pretty sure it used to work (perhaps with an
August 06 release).
Starting from your example, the following was the smallest file I
could find showing the same problem (using the latest beta):
\def\room{\st
Hello Hans,
The following code compiles fine with MikTeX (version 2006.08.22), but
fails with a recent beta:
\def\room#1{\starttable[ s0 |r|l|]#1\stoptable}
\def\student#1#2{\NC#1\NC#2\NC\MR}
\starttext
\room{
\student{A}{B}
\student{C}{D}
}
\stoptext
I get the following error:
> >> --
> >> \|10 as a relacement for \VL gives me thicker vert. lines in that
> >> position only. How can I define a thicker vert. Line for the
> >> whole column? My attempts in \starttable[..\|10..] doesn't work.
> >> --
Is there an other way of changing l
[EMAIL PROTECTED] wrote:
> Hallo!
>
> Has anybody same effects? Or is this me alone?
> Should this work, or is tableenvironment still experimental and those
> effects normal?
>
> Wolfgang
>
>
>> I have studied the table examples at contextgarden and have some
>> questions.
>> -
Hallo!
Has anybody same effects? Or is this me alone?
Should this work, or is tableenvironment still experimental and those
effects normal?
Wolfgang
> I have studied the table examples at contextgarden and have some
> questions.
> --
> \|10 as a relacement for \VL gives me
301 - 400 of 538 matches
Mail list logo
