@pdml.net
Sent: Mon, 14 Feb 2005 07:19:59 +0100
Subject: RE: right angle finder
I see.
My refcoverter has the internal screw threads in the converter, not the
flange.
So, I must only bore new holes in the flange, then screw on the new flange.
I may be wrong, though. We'll see.
http
The A and M Refconverters will fit on the earlier cameras, but are a bit loose
- slight lateral movement. They stay on fine but you have to make sure they're
upright.
The older refconverters wont fit the M and later cameras as the viewfinder
mount is slightly larger.
Nick
-Original
://hjem.get2net.dk/bladt
-Oprindelig meddelelse-
Fra: Fred [mailto:[EMAIL PROTECTED]
Sendt: 12. februar 2005 03:18
Til: Godfrey DiGiorgi
Emne: Re: right angle finder
Does anyone know whether there is a Pentax right angle finder attachment
that works with the *ist DS? I've seen a couple
Sent: Sun, 13 Feb 2005 21:24:17 +0100
Subject: RE: right angle finder
I have an old one - for M or K kameras (fits my K1000).
I believe I can make it fit both A and D bodies if I kill a couple of
eye-cups to make exchangeable eyepiece-flanges/-mounts.
I just haven't done this yet. Has anybody
Whittingham [mailto:[EMAIL PROTECTED]
Sendt: 13. februar 2005 22:18
Til: pentax-discuss@pdml.net
Emne: RE: right angle finder
Before I found the refconverter A at a reasonble price I superglued the
fitting from the eyecup M to the refconverter II (K). The biggest problem
was
removing the ring from
-- Original Message ---
From: Jens Bladt [EMAIL PROTECTED]
To: pentax-discuss@pdml.net
Sent: Mon, 14 Feb 2005 00:56:24 +0100
Subject: RE: right angle finder
Thanks, John.
That sounds a little difficult. On my refconverter there's a metal
mount, fitted with small screws. I was imgining I could
://hjem.get2net.dk/bladt
-Oprindelig meddelelse-
Fra: John Whittingham [mailto:[EMAIL PROTECTED]
Sendt: 14. februar 2005 01:02
Til: pentax-discuss@pdml.net
Emne: RE: right angle finder
Hi Jens
Unfortunately IIRC the screws do not line up from one to another, buying a
tap to cut new threads was quite
Godfrey DiGiorgi escribió:
Does anyone know whether there is a Pentax right angle finder
attachment that works with the *ist DS? I've seen a couple of
Pentax RAFs on Ebay but only for older generation cameras.
You can use Refconverter A or M, both of them will work with your *ist DS.
Carlos
Some said Minolta Olympus (OM series) angle finders fit too, but I have
not tried.
I do know from experience that the OM finder (I don't know its official
model number, but there was only one of 'em) will fit on M and later Pentax
bodies, although it does fit rather snugly (compared to the
Thanks for the information. I've done a search for the Pentax
Refconverters ... wow, they're expensive new ($300 plus from
BH) and virtually unfindable used.
The Olympus OM Varimagni finder is much more accessible, I'll
likely pick up one of those.
Godfrey
--- Fred [EMAIL PROTECTED] wrote:
The Olympus OM Varimagni finder is much more accessible, I'll likely pick
up one of those.
Yeah, ~that~ is what it's called - g.
As I said, it's a bit tighter to put on and take off a Pentax M or later
finder window, but it'll work fine otherwise.
Also (from memory, so I certainly could be
Just one other comment on Pentax Ref-M and Ref-A usage: I prefer to use
either of them (I have a Ref-A) instead of the LX's FE-1 Magni-Finder on an
LX body, given the choice.
Fred
On 12 Feb 2005 at 11:37, Fred wrote:
Just one other comment on Pentax Ref-M and Ref-A usage: I prefer to use
either of them (I have a Ref-A) instead of the LX's FE-1 Magni-Finder on an LX
body, given the choice.
Wow, I tried the Ref-A (only option on the *ist D) and couldn't stand it (picky
Does anyone know whether there is a Pentax right angle finder
attachment that works with the *ist DS? I've seen a couple of
Pentax RAFs on Ebay but only for older generation cameras.
thanks
Godfrey
__
Do you Yahoo!?
The all-new My Yahoo! - Get
Refconverter 'A'.
John
-- Original Message ---
From: Godfrey DiGiorgi [EMAIL PROTECTED]
To: pentax-discuss@pdml.net
Sent: Fri, 11 Feb 2005 15:21:15 -0800 (PST)
Subject: right angle finder
Does anyone know whether there is a Pentax right angle finder
attachment that works
Does anyone know whether there is a Pentax right angle finder attachment
that works with the *ist DS? I've seen a couple of Pentax RAFs on Ebay
but only for older generation cameras.
I would think that both the Refconverter-M and the Refconverter-A would
work on the *ist DS.
Fred
--- Godfrey DiGiorgi [EMAIL PROTECTED] wrote:
Does anyone know whether there is a Pentax right angle finder
attachment that works with the *ist DS? I've seen a couple of
Pentax RAFs on Ebay but only for older generation cameras.
Refconverter M A work on all Pentax 135 bodies from M
Hi
The M right angle finder does not fit the Pentax Super A and Program A very
well, you will not see
Aperture and time settings through the viewfinder, because they are on the
bottom (ME Super on the left)
greetings
Markus Maurer
I know for sure that the M and A ref converters fit everything
are cheap ($30-$50?).
For an M or A finder (the ones with the 1X-2X switch),
I'd say anything under $70 is cheap and over $150 expensive.
$110 to $130 is a real bargain on the new price of $200+.
Regards, Bob S.
What is a reasonable price for a right angle finder on eBay?
--
Frits Wüthrich [EMAIL
?).
For an M or A finder (the ones with the 1X-2X switch),
I'd say anything under $70 is cheap and over $150 expensive.
$110 to $130 is a real bargain on the new price of $200+.
Regards, Bob S.
What is a reasonable price for a right angle finder on eBay?
--
Frits Wüthrich [EMAIL PROTECTED
Frits,
You will have to check Boz's site. I have catalogues with the Ref Converter II
listed, but have never personally seen one. I believe it has a mirror rather than
prisms which is why the objects in the viewfinder are laterally reversed.
I know for sure that the M and A ref converters
Thanks, I now did look at Boz's site.
The II has a prism in it, the M and A have magnification on top of the
prism, the model without the designation has a mirror.
On Wed, 2004-04-14 at 14:10, [EMAIL PROTECTED] wrote:
Frits,
You will have to check Boz's site. I have catalogues with the Ref
What is a reasonable price for a right angle finder on eBay?
--
Frits Wüthrich [EMAIL PROTECTED]
For M42 bodies, $30, refconverter M, $100, ref A, $115.
- Original Message -
From: Frits Wüthrich [EMAIL PROTECTED]
To: Pentax-Discuss [EMAIL PROTECTED]
Sent: Tuesday, April 13, 2004 6:48 AM
Subject: right angle finder
What is a reasonable price for a right angle finder on eBay
for a right angle finder on eBay?
--
Frits Wüthrich [EMAIL PROTECTED]
For anyone looking for the above, I've noticed it again in this week's 'New
Arrivals' from Cameta Camera at $69. Seems like a good price if the
condition is OK and it is a handy piece. They don't indicate if it is an A
or M, but these are the only ones with 1X-2X and fit everything from the
The finder is the "M' version. Thank
you.
Jim Commins wrote:
I
have listed a Pentax Right-Angle Finder on EBay at http://cgi.ca.ebay.com/aw-cgi/eBayISAPI.dll?ViewItemitem=1262479504
This item fits any Pentax SLR camera
from the last 20 years (back as far as the MX at least). I don't
know about before that. It has 1X and 2X
I have listed a Pentax Right-Angle Finder on EBay
at http://cgi.ca.ebay.com/aw-cgi/eBayISAPI.dll?ViewItemitem=1262479504This
item fits any Pentax SLR camera from the last 20 years (back as far as the MX at
least). I don't know about before that. It has 1X and 2X
magnification and is in very
if it's the model I have, it is quite expensive--- not sure, maybe $200 or so new.
[EMAIL PROTECTED] 08/08/01 02:16PM
I have listed a Pentax Right-Angle Finder on EBay at
http://cgi.ca.ebay.com/aw-cgi/eBayISAPI.dll?ViewItemitem=1262479504
This item fits any Pentax SLR camera from the last
[EMAIL PROTECTED] announced:
I have listed a Pentax Right-Angle Finder
on EBay at
http://cgi.ca.ebay.com/aw-cgi/eBayISAPI.dll?ViewItemitem=1262479504
This item fits any Pentax SLR camera from
the last 20 years (back as far as the MX at least).
Your description leaves a bit
I'm still pondering right-angle finders, but don't want to pay 1/3 the
price of an MZ-S.
Will a right-angle finder that fits the K1000 also fit the PZ-1p?
Thanks again,
Joe
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions
[EMAIL PROTECTED] writes:
I'm still pondering right-angle finders, but don't want to pay 1/3 the
price of an MZ-S.
Will a right-angle finder that fits the K1000 also fit the PZ-1p?
NO - different size viewfinder windows!
Regards, Bob S.
-
This message is from the Pentax-Discuss Mail
That is why us Olympus users are out looking for Refconverters which might
also account for their rarity. The Refconverters don't reverse the image.
Perhaps that's the reason it's so expensive.
regards,
Alan Chan
_
Get
In a message dated 7/14/01 12:14:19 AM Pacific Daylight Time,
[EMAIL PROTECTED] writes:
Date: Sat, 14 Jul 2001 08:35:57 +0530
From: RK [EMAIL PROTECTED]
Subject: Re: Right-angle Finder?
Yup; the [Olympus] Varimagni fits perfectly.
I suggest you try out a demo before buying one
In a message dated 13/07/01 19:09:26 GMT Daylight Time,
[EMAIL PROTECTED] writes:
I read in an astrophotography book I have that the Olympus Vari-Magni
finder
will fit the K1000. If this is the case, then I believe it would not fit
the PZ-1p.
We have a K series right angle finder here
Yup; the Varimagni fits perfectly.
I suggest you try out a demo before buying one; this finder creates an inverted
image which is a little disturbing at first.
Or do all right-angled finders do this?
RK
Peifer, William [OCDUS] wrote:
I read in an astrophotography book I have that the Olympus
Does any manufacturer have one that will fit the (P)Z-1p?
Thanks,
Joe
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
On Thu, 12 Jul 2001 10:22:16 -0600, you wrote:
Does any manufacturer have one that will fit the (P)Z-1p?
I've been told the Olympus Vari-Magnifier will fit the
PZ1p, but I haven't tried it for myself. There's one on
Ebay now at:
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItemitem=1254311778
readdress
the subject line some of the people with refconverter M's will read it and
answer specifically.
Good luck,
Dan Scott
Kevin wrote:
Do you know which right angle finders other than the M will fit the
eyepiece of the ZX-5n? I really want a right angle finder but don't want
to buy something
Add my name to anyone trying to sell one... but I am becoming resigned to
the
fact that I may have to spring for a new one.
This babe is even rarer than the A*135/1.8 or F*300/4.5. All I can say is -
good luck (I know I was). 8-)
regards,
Alan Chan
Kevin Thornsberry wrote:
I recall someone recently saying there is an Olympus right angle finder that will
work on a ZX-5n. Can anyone verify my memory on this and maybe even give me a model
or part number.
You're looking for an Olympus Varimagnifinder- slots in perfectly on my MZ5
Do you know which right angle finders other than the M will fit the eyepiece of the
ZX-5n? I really want a right angle finder but don't want to buy something that won't
fit.
-Original Message-
From: Dan Scott [SMTP:[EMAIL PROTECTED]]
Sent: Thursday, March 22, 2001 9:26 AM
Hi Alistair
I reasently asked Pentax Denmark about the price for new right-angle
A-finder. As fare as I remember they wanted approx. 1000$ for it!!
I bought an older version (K1000) at ebay for less than 100$. It's quite
nice. I'm going to alter the mount to fit my Super A. It can be done by
"Robertson, Alastair" wrote:
Hi
I am after a right-angle finder for my super program. Ideally it should be
the A-type that allows the LCD panel to be viewed. Anybody willing to sell
me one for a reasonable price?
I have been trying to pick one up on e-bay for some time. Ha
Kevin,
The Olympus Mailing List discussion archives can be found at
http://zuiko.sls.bc.ca/swright/archives/.
--
Date: Tue, 20 Mar 2001 23:17:55 -0600
From: Kevin Thornsberry [EMAIL PROTECTED]
Subject: Right Angle Finder for ZX-5n (was RE: Right-angle finder A)
I
Hi
I am after a right-angle finder for my super program. Ideally it should be
the A-type that allows the LCD panel to be viewed. Anybody willing to sell
me one for a reasonable price?
Cheers
Alastair
Dr Alastair W. Robertson
Robertson, Alastair would like to recall the message, "WTB: Right-angle
finder A".
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
I recall someone recently saying there is an Olympus right angle finder that will work
on a ZX-5n. Can anyone verify my memory on this and maybe even give me a model or
part number.
-Original Message-
From: Robertson, Alastair [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, March 20, 2001
49 matches
Mail list logo