Spotify on MySqueezebox does not use the protocol handler so will only
play on the Touch and Radio, not the Duet, Boom, Classic or older
players.
Sent from my F5121 using Tapatalk
Matt
SQUEEZEBOXES:[/B] TWO SB DUETS (LIVING ROOM AND KITCHEN) AND A
*'PICOREPLAYER'
Without Perl-related SSL libraries (not only OpenSSL), it cannot work
and/or you might still have a problem with your API key. Make sure
you've followed precisely the procedure. I think somewhere in this
thread, there was some discussions about VB 2.4 being a better base, but
I'm not sure. Other
kllngtme wrote:
> I've been hitting refresh almost daily on this thread anxious for the
> release. Currently I have on/off functionality of my Squeezeboxes with
> my voice via ha-bridge and domoticz. I can't wait to be able to change
> music and volume with my voice though! Keep up the good
frankd wrote:
> Hi Seb,
> did you try to run the musicmagicserver via Qemu directly instead of
> relying on binfmt?
> Maybe as a first tes you can try if following lines starts the
> web-interface of the MusicMagicServer:
> sudo qemu-i386
>
I've been hitting refresh almost daily on this thread anxious for the
release. Currently I have on/off functionality of my Squeezeboxes with
my voice via ha-bridge and domoticz. I can't wait to be able to change
music and volume with my voice though! Keep up the good work!
It look like you need pulseaudio to be setup as system if you are
runnign LMS as a service. LMS does not have to run as a service - that
is a user installed choice.
>From Pulse audio man page
Code:
--system[=BOOL]
Run as system-wide instance instead of per-user.
mgw wrote:
> bpa - my understanding so far is that ALSA supplies the basics to use
> the sound cards. Since Ubuntu 9.10 - introduced with 8.04 - the
> preferred sound server is pulseaudio (that must be 2010 or so) for
> Ubuntu (exception: Lubuntu, which is pure ALSA).
>
> The means in our case
MDE wrote:
> Sorry for the shorthand. What I mean is that if I select the mic and
> speaker on the AlsaMixer, it plays OK, but if I use the capture mic and
> record to a file, then play back the file, it is distorted. The input
> format is S16_LE (rate 44100) and I am recording to a .wav file.
bpa - my understanding so far is that ALSA supplies the basics to use
the sound cards. Since Ubuntu 9.10 - introduced with 8.04 - the
preferred sound server is pulseaudio (that must be 2010 or so) for
Ubuntu (exception: Lubuntu, which is pure ALSA).
The means in our case we have a chain like
22215
+---+
|Filename: Auswahl_008.jpg |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=22215|
+---+
bpa wrote:
> I haven't had time to look at latest log.
>
> Not possible to have Alsa and pulseaudio installed at the same time. I
> think you are seeing the Alsa emulation support for pulse. Since you
> didn't know about "su" I worry whether your skills are good enough to
> recover from
bpa wrote:
> I don't understand what you mean.
>
>
> At a guess there is a conversion happening which depend on the source
> alsa and the output file format. Try to match output file format so
> that no conversion from source format and see if sound is OK.
Sorry for the shorthand. What I
Squeezemenicely wrote:
> Yes it is an unknown brand speaker. So he has to put encryption on? He
> tried that yesterday, made no difference.
>
> He is using the dev version
Then I can't tell without a logfile
LMS 7.7.5 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos 2xPLAY:1,
PLAY:3,
mgw wrote:
> ALSA is installed as well by default. I'll kill pulseaudio and give a
> next try... in this case I must change to config back to arecord ?
> Please advise. Txs
I haven't had time to look at latest log.
Not possible to have Alsa and pulseaudio installed at the same time. I
think
ALSA is installed as well by default. I'll kill pulseaudio and give a
next try... in this case I must change to config back to arecord ?
Please advise. Txs
mgw's Profile:
bpa wrote:
> You now are beginning to understand why I hate Pulseaudio and think it
> is the wrong default package. My advice is unless you really really
> really need pulseaudio - uninstall pulseaudio and install ALSA and it'll
> be working with far less hassle (I don't know if that is easy or
mgw wrote:
> Txs for your help so far, bpa - this is really confusing to some
> extend...
You now are beginning to understand why I hate Pulseaudio and think it
is the wrong default package. My advice is unless you really really
really need pulseaudio - uninstall pulseaudio and install ALSA and
new server.log attached
Code:
22211
+---+
|Filename: server.log |
|Download:
bpa wrote:
> Well there is on my Ubuntu but the user has to have the permission to
> use it.
>
> If you are runnign LMS as a service (which I think you are but you
> haven't said) - then waveinput under pulse will not work unless pulse is
> setup a system or daemonized as LMS and audio source
Try restarting your Router. As it's the Touch itself that communicates
with mysbc and not the PC when you're using the Touch stand alone, maybe
there went something wrong in their connection.
karlek's Profile:
MDE wrote:
> hmm - something wrong with ALSA - straight through mic-speakers is OK
> but arecord to file is not.
I don't understand what you mean.
> PulseAudio is NOT installed. Any suggestions what to look for?
At a guess there is a conversion happening which depend on the source
alsa and the
hmm - something wrong with ALSA - straight through mic-speakers is OK
but arecord to file is not. PulseAudio is NOT installed. Any suggestions
what to look for?
MDE's Profile:
bpa wrote:
> Well there is on my Ubuntu but the user has to have the permission to
> use it.
>
> If you are runnign LMS as a service (which I think you are but you
> haven't said) - then waveinput under pulse will not work unless pulse is
> setup a system or daemonized as LMS and audio source
philippe_44 wrote:
> What airplay is this? It's likely a ciphering issue - you need to enable
> it on all shairport-based devices (most devices with unknown brand)
Yes it is an unknown brand speaker. So he has to put encryption on? He
tried that yesterday, made no difference.
He is using the
mgw wrote:
> There is no su on Ubuntu, I'm afraid...
Well there is on my Ubuntu but the user has to have the permission to
use it.
bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
View this thread:
What airplay is this? It's likely a ciphering issue - you need to enable
it on all shairport-based devices (most devices with unknown brand)
LMS 7.7.5 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos 2xPLAY:1,
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBMC, Foobar2000, XBoxOne,
JRiver 21,
bpa wrote:
> I still think the issue might be permissions but as I don't actively use
> Pulse I'm not certain. If your LMS is running as a service, then it has
> a different parent process to the application which is producing the
> audio on the PC.
>
> As a test - open a shell prompt, su to
Well this is no problem using the lms (latest version) on my home
server. Problems appear when connecting to mysqueezebox.com and using
the spotify app there.
But can you say something about audio quality with and without protocol
handler / spotify app on lms and mysqueezebox.com?
mgw wrote:
> Yep - sorry I picked the wrong server log file. My apologies -mgw
If Pulse is not run system wide or as a daemon then an instance is run
under each logged in user process. This instance can only move audio
from processes under that logged in user. If LMS and the audio
MDE wrote:
> Any ideas what might be causing this problem?
> I have been using WaveInput very successfully for over a year. Now the
> sound is always distorted/warbling. LMS is running on a Raspberry Pi and
> I have made no changes to the configuration. The warbling has always
> occurred if the
bpa wrote:
> Log shows nothing useful for today except that your LMS has other
> problem -log for yesterday shows using arecord.
Yep - sorry I picked the wrong server log file. My apologies -mgw
mgw's Profile:
Any ideas what might be causing this problem?
I have been using WaveInput very successfully for over a year. Now the
sound is always distorted/warbling. LMS is running on a Raspberry Pi and
I have made no changes to the configuration. The warbling has always
occurred if the Pi is working too hard
philippe_44 wrote:
> Interesting, I'll try that when I'm back home, it must be new. I know
> for sure during my initial tests that Sonos was not supporting raw pcm
> (I have 5 sonos). I will then update the profiles.xml accordingly
Give it a shot and please correct me if I'm wrong. I'm used to
I still think the issue might be permissions but as I don't actively use
Pulse I'm not certain. If your LMS is running as a service, then it has
a different parent process to the application which is producing the
audio on the PC.
As a test - open a shell prompt, su to squeezeboxserver and run
karlek wrote:
> Try raising the buffered time.
Thank your for your reply. I played with this value (3 - 30 seconds),
but only the frequency and duration of the re-bufferings change.
lenzelot79's Profile:
I have tested the same setup and it works OK on my Ubuntu 14.04 - see
log below. Only difference are Ubuntu version and I don't run LMS as a
service. I'll study the log to seeif there is any differnce. You should
check whether Pulseaudio changed between 14.04 and 16.xx and if it did
what are
Log shows nothing useful for today except that your LMS has other
problem -log for yesterday shows using arecord.
Code:
017-02-27 20:08:12 squeezeboxserver_safe started.
[17-02-27 20:08:13.3591] main::init (384) Starting Logitech Media Server
(v7.9.0, 1480516903,
server.log with analog_stereo.monitor 22208
+---+
|Filename: server.log |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=22208|
bpa wrote:
> That look OK.
>
> You need to do a log with player.source set to DEBUG to see what is
> going on.
> Also attach a copy of the custom-convert.conf file.
Here you go:
server.log 22207
/var/lib/squeezeboxserver/cache/InstalledPlugins/Plugins/WaveInput/custom-convert.conf
Code:
mgw wrote:
> Looks like... 22204
That look OK.
You need to do a log with player.source set to DEBUG to see what is
going on.
Also attach a copy of the custom-convert.conf file.
bpa's Profile:
40 matches
Mail list logo
