May I ask in which region you're living? l
I'm from Austria ...
Interesting: did indeed find three partial downloads from my origin
server to the CDN. One each for Austria, Germany and Norway.
I uninstalled Spotty and reinstalled it the "normal" way (via web
interface) - it worked fine! :co
Cut-Throat wrote:
> > philippe_44 wrote:
> >
> >
> > Just to be sure I am trying to use the 1st Generation Chromecast Device
> > not the Audio one. Mine looks like
> >
> > 25446> >
>
> Yes, it works, I have this one as well. For logging, it's in the
> setting section, tab advanced, select
mherger wrote:
> May I ask in which region you're living? l
I'm from Austria ...
mherger wrote:
> Please try again. I've wiped the caches and am now getting the correct
> file.
I uninstalled Spotty and reinstalled it the "normal" way (via web
interface) - it worked fine! :cool:
Walter
-
@ Michael - can you check the ZIP?
Wow... ok, that file was indeed f... up! Not on my server, but the copy
delivered by the CDN. May I ask in which region you're living? It seemed
to be working fine for many users. Which means that only one copy in one
of the CDN's edge servers was broken. Th
rgdawson wrote:
> I think I can isolate where this happens and make SLX detect and
> recover. Standby and we shall see.
>
> R Greg Dawson
Status: I have figured out how to detect this and recover. I should
have a fix out this week.
R Greg Dawson
Squeezelite-X
Guys: don't mess with the plugin installer. You're asking for problems.
Did you wait a minute or two after you got the reboot prompt? Last time
somebody reported issues, this fixed it.
Enable debug logging for plugin.extensions and server.plugins. Re-try
the installation. Send the server.log.
I tried multiple times since yesterday to update Spotty from 2.3.7 to
2.4.1 with no success.
After removing Spotty I am not able to reinstall it.
How does it fail?
Also trying to download ist to
@appstore/SqueezeCenter/Cache/DownloadedPlugins and restart the service
will not bring Spotty back
Jeff07971 wrote:
> I believe that this has always been the case, I do not believe its the
> switch from WiFi to Eth or vice versa.
> I think this is an issue that inbetween the switch the network goes
> "Down"
> I have seen this when changing the MTU or IP address etc on a wired only
> PC
> I si
nickb wrote:
> Sure, understood. Good news then - this isn't necessary now - you can
> use 'the new MQTT transport'
> (https://github.com/declension/squeeze-talexa/blob/master/docs/MQTT.md)
> instead if that takes your fancy. This requires no ports to be opened,
> no LMS plugins to be installed,
Omar Hawk wrote:
> Yes
>
> Walter
Whatever i do it remains inactive.
Thanks anyway, so i live without like before. Sure i set something wrong
in the NAS settings or ssots or whatever. Sorry for disturb.
mikitil's Profil
NFLnut wrote:
>
>
> Main reason being, I don't want to accidentally and unsecurely blow open
> a port on the innerwebz for every script kiddie on the planet to play
> with.
>
Sure, understood. Good news then - this isn't necessary now - you can
use 'the new MQTT transport'
(https://github.c
mikitil wrote:
>
> Is this right? Go to folder, then:
> chmod 666 Spotty-2.4.1.zip ?
Yes
Walter
Omar Hawk's Profile: http://forums.slimdevices.com/member.php?userid=56852
View this thread: http://forums.slimdevices.com/
I would love to try this as Alexa/Echo seems fairly useless to me (I
recently purchased a Show and a Dot to experiment with, the latter which
I really needed to connect directly to my Denon receiver, and I'm pretty
nonplussed by the whole experience). I have no interest in listening to
Amazon Mus
Omar Hawk wrote:
> Strange - my post a few hours ago has not been made visible so far (a
> moderator has to approve) - so I give it a try again:
>
> The way I was able to install Spotty manually is:
>
> > > >
- Install Spotty via the webinterface
- when the messagebox (Restart LMS now
Strange - my post a few hours ago has not been made visible so far (a
moderator has to approve) - so I give it a try again:
The way I was able to install Spotty manually is:
- Install Spotty via the webinterface
- when the messagebox (Restart LMS now or later) appears copy the ZIP
from h
rgdawson wrote:
> Thank you for sharing this with me. Has this always been an issue or
> did it begin recently? I was able reproduce this issue on another
> machine and I consider it a bug. I don't know if it has always been
> there or if I introduced it recently. I need to dig into it. (My
philippe_44 wrote:
> > Cut-Throat wrote:
> >
> >
> > Did you try to access the settings after the latest LMS restart in that
> > log?
> >
> > Yes, Multiple times
> >
> >
> > Can you also enable at least info log settings for the CC plugin?
> >
> > Not sure how to do this
> >
> > > >
Cut-Throat wrote:
> > philippe_44 wrote:
> >
> >
> > Attached!> >
>
> Did you try to access the settings after the latest LMS restart in
> that log? Can you also enable at least info log settings for the CC
> plugin?
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
P
Hi Greg. It's a fresh installed W10 pro 64b laptop. And I noticed the
behavior when I pulled the ethernet cable and switched to wifi.
*SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x
Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden)
1x OSMC + Squeeze
edwin2006 wrote:
> When I change from ethernet to wifi or vice-versa I get a socket error
> 10054 (continuesly pop - ups are filling the screen) . Shutting down the
> app and restarting usually solves this but what is casing this?
> Btw latest version from W10 store. Did a reinstall hoping this
For the one who have a problem with the Jongo, do you know how to take a
wireshark log? That would help tremendously to see what it does not like
in the difference between 0.2.x and 1.x
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL On
philippe_44 wrote:
> > Cut-Throat wrote:
> >
> >
> > There must be some interesting information in server.log> >
>
> Attached!
+---+
|Filename: server.log.zip |
|Download: http://foru
drgeoff wrote:
> Another data point.
>
> Using the 0.2.15.1 version of UPnPBridge running on the WHS to "publish"
> the Jongo as a squeezeplayer, LMS on the RPi can play flacs. So the
> bridge is definitely the problem, not the LMS version on the RPi or the
> RPi.
And on WHS, does it need htt
Cut-Throat wrote:
> > kidstypike wrote:
> > You can get a ChromeCast Bridge settings here?
> >
> > Yes, I tried that as well, and nothing happens when I click on
> > 'Chromecast bridge'
> >
> > EDIT: If I leave it long enough, it eventually 'times out' -- I am
> > running LMS on my Synology
Another data point.
Using the 0.2.15.1 version of UPnPBridge running on the WHS to "publish"
the Jongo as a squeezeplayer, LMS on the RPi can play flacs. So the
bridge is definitely the problem, not the LMS version on the RPi or the
RPi.
---
I tried multiple times since yesterday to update Spotty from 2.3.7 to
2.4.1 with no success.
After removing Spotty I am not able to reinstall it.
Also trying to download ist to
@appstore/SqueezeCenter/Cache/DownloadedPlugins and restart the service
will not bring Spotty back to my Ds214play.
W
kidstypike wrote:
> You can get a ChromeCast Bridge settings here?
>
> Yes, I tried that as well, and nothing happens when I click on
> 'Chromecast bridge'
Cut-Throat's Profile: http://forums.slimdevices.com/member.php?u
Cut-Throat wrote:
> Thanks for your reply!
>
> Yes, I can see the Device and can Cast to my TV
>
> I just disabled the C.B. Plugin again and re-started LMS... Enabled C.B.
> again and then re-started LMS again.
> Then I clicked on 'Settings' next to the Pluggin and nothing happens.
>
> I
mikitil wrote:
> There was no squeezeboxserver directory in var/lib
I guess the directory structure on your NAS is different - you should be
able to find it under Settings / Information (at the bottom there is a
section with the important directories).
mikitil wrote:
> Will give the normal w
Paul Webster wrote:
> Is the Chromecast device working by itself?
> e.g. is it connected to your WiFi and visible to Google Home app?
Thanks for your reply!
Yes, I can see the Device and can Cast to my TV
I just disabled the C.B. Plugin again and re-started LMS... Enabled C.B.
again and
Is the Chromecast device working by itself?
e.g. is it connected to your WiFi and visible to Google Home app?
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile: http://for
1.1.0.3 still not OK for me either.
I have UpnPBridge 0.2.12.1 with LMS on a Windows Home Server. I put a
FLAC file on that and can play it to the same Jongo.
Here is the log of that
Code:
[13:19:33.890] AVTStop:218 uPNP stop for
http://192.168.1.87:33089/Control/org
Omar Hawk wrote:
> Looks like if you have a blank within the path "DownloadedPlugin
> s"
>
> Walter
>
> Edit: The ZIP File at http://downloads.nixda.ch/Spotty-2.4.1.zip seems
> to be fixed now - try the regular way by now ...
No, its just because i copy the line from putty.
There was
mikitil wrote:
> Thank you, i will test this.
>
> cp: cannot create regular file
> `/var/lib/squeezeboxserver/cache/DownloadedPlugin
> s': No such file or directory
>
Looks like if you have a blank within the path "DownloadedPlugin
s"
Walter
--
I saw the "400 Bad Request" error message in my log file when I copied
and pasted a new API key in to the plugin configuration page.
In my case the problem turned out to be that the copied key had a space
at the beginning which needed to be removed.
The unwanted space character was present in the
mherger wrote:
> >
> I believe the NAS _should_ work (based on the CPU type). Make sure you
> give it some time before you click the "restart LMS" button you get
> after you install a plugin. Spotty is a bit heavy and can take a while
> to properly install.
>
Thank you, i will test this.
>
When I change from ethernet to wifi or vice-versa I get a socket error
10054 (continuesly pop - ups are filling the screen) . Shutting down the
app and restarting usually solves this but what is casing this?
Btw latest version from W10 store. Did a reinstall hoping this would
solve this behavior
philippe_44 wrote:
> No, it's exactly what it is made for. What did fail?
Thanks for your Reply!
I never was able to see it listed under Players in LMS.
First I was not even sure where I should plug in the Chromecast. I
plugged it into my TV, as this was the only place on my network with an
H
mikitil wrote:
> Hi, maybe you can give me a hint or help?
> I use a Qnap TS119P II more or less only for LMS, if i want to activate
> spotty in the plugins, it does not activate, just goes back to
> inactive.
> Is this NAS not compatible or am i doing something wrong.
> Newest Qnap Firmware 4.3
philippe_44 wrote:
> So try to disable icy-metadata (see settings in plugin UI). This only
> applies to mp3 or aac
Hello and gold morning, I updated now to 1.1.0.3 . unfortunatly now
flac-playing. Progress-bar works. Changing icy-meta to "no" doesn't
change behavior.
Greatings, thk_ms
--
Cut-Throat wrote:
> So, I see this Chromecast Bridge Plugin and I have this 4 years old
> Chromecast Dongle, with an HDMI plug. Is it possible to turn this device
> into a Squeezelite Player? -- I tried by enabling the plugin, and
> failed. But maybe I'm barking up the wrong tree?
No, it's exac
41 matches
Mail list logo