WOW, thanks for your replies. I found the down loads of 7.5.0, disks 1 and
2. I also downloaded a pc to mac transfer program. It finely worked. I
found disk tools and booted up. It dosent show a dard drive at all on the
screen. I recall it did befor. When i finely get threw swaping disk
Tom Saecker [EMAIL PROTECTED] wrote:
Hi, Since my local source didn't know I'll ask this panel of experts.
I've been learning how to use this Global Village 56K PC card Modem
in my 5300cs and while I have gotten on line with it I have been
unable to eject it. I have had to physically
I have a DuoDock model M7779 someone gave me thinking it would work with
my PB520. If this is the one you need, contact me offlist and we'll make
arrangements. :)
Later.Howard
Computer n. A pocket calculator with a
Dear Powerbook Geniuses,
I've been working on my 1400cs to solve a really lousy battery-life problem
(10 minutes to hard shutdown) and my latest effort was to reset the PRAM.
After doing so I noticed that the HD space available indication showed about
110MB less on my 750MB HD than it was showing
My Reply follows quote. On 07/02/2004 03:10 [EMAIL PROTECTED] said:
Dear Powerbook Geniuses,
I've been working on my 1400cs to solve a really lousy battery-life problem
(10 minutes to hard shutdown) and my latest effort was to reset the PRAM.
After doing so I noticed that the HD space
I've got a stock 1400/133 with 48 MB RAM and OS 8.1. I need to run MS
Word and Excel having to send out multiple documents to several people,
most of them using PC's (poor guys). My issue is that Office 2001 just
runs too slow on this machine to be useful. So I'm looking for
suggestions
Can anyone give me a step-by-step procedure or maybe point me to any web
page telling how to install OS 7.6 on a PowerBook DUO from scratch? I tried
on both a Duo230 and a 280C, and both punked out on me with an error message
at the same point during installation.
Unfortunately, I don't have
I use MS Office 98 on my 3400 running 8.6 and on my 12in. G3. It is
relatively fast on both. I don't know what changes to 98 were made when
going to 2001. Upgrading the amount of RAM may be the answer if you can.
Adding more memory for the application may help also. Be sure the other end
saves
I believe that you need an enabler on both machines to load 7.6, or any new
system. That is a little software program that may be on your cd now.
However, after several experiences, be sure that you run HDSC Setup so that you
update the hd driver. The system will not load if you don't and you
You wrote:
All my macs have floppy
drives to get new files (such as internet softtwre) onto them, otherwise
use terminal proggies to transfer them from pc to mac.
Then you wrote:
As for appletalk, how is this done? I never mentioned actually getting a
pc to talk to the duo
Ok, you didn't say that
Use MS Office v4.2.1 on my 1400cs 166mhz and it works just fine.
usually available from eBay for about US$20.00 or about 12GBP.
Harry
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital
Eject has no effect,on or off or asleep. The manual eject button has
no effect and the paper clip method has no effect.
Is this normal? Do I have a deformed card? It looks straight.
This doesn't conform to the user manual at all.
Is it safe to just leave it in all the time? Since it protrudes
Message-Id: [EMAIL PROTECTED]
From: Brian Andrews [EMAIL PROTECTED]
Subject: Newbie Issues with Duo 2300c
Date: Tue, 3 Feb 2004 19:12:05 -0500
Hi,
I just picked up a Duo 2300c from the LEM Swap list. It arrived with a
cracked left front (battery holder) and a 1 stripe of white pixels
that runs
Rob, PowerBookers All
HowDy!
It seems that I've caused others with the PB170 to finally
come out of closit hiding, and start posting, sure wish this
happened sooner, Please do see mixed in below
PowerBooks wrote:
PowerBooks Digest #1626
From: Cornett
Subject: Re: PB170 advice needed
snip
I checked every folder in the HD and on the desktop for their sizes and the
total I arrive at differs from what the 1400 is telling me by about 110MB. I
did another PRAM reset and found no difference - still 110MB short of my
calculations. I did a desktop rebuild - still no change. Where did those
Dan,
Actually, I'm installing from floppies, not CD. At what point do I need to
get the enabler, and where and how do I install it? I know I'll need to get
it from Apple's FTP, but I imagine I can handle that. Do I install it before
installing the OS itself?
Thanks for the help, it's
My old HP4ML printer died and the repair was too expensive to merit
fixing. Is there any way I can print with a USB printer from a 520,
5300 or 100? Or any of my older computers? I now have an HP 1012 laser
and an iMac. Maybe some kind of file sharing via Ethernet?
Or can the EtherWav
17 matches
Mail list logo
