Anyone have any suggestions for a web based email alternative to sqwebmail?
Thanks
Ooops, forgot the rest of the message.
When I run everything the very last make gives me the following error.
Anyone have any ideas?
Thanks
make install-configure
list=ldapaddressbook.dist `cat authlib/authconfiglist`; \
for file in $list; do \
I just forward his bounces to his bigfoot.com account. With the address to
un-subscribe in a little note.
They haven't bounced from there yet. Maybe he'll figure it out.
- Original Message -
From: Henning Brauer [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Bruno Wolff III [EMAIL
Almost forgot. His bigfoot address is [EMAIL PROTECTED]
That's the address that shows on the whois lookup.
- Original Message -
From: Henning Brauer [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Bruno Wolff III [EMAIL PROTECTED]
Sent: Tuesday, July 17, 2001 12:16 PM
Subject: Re: Col
In the user directory open up .qmail put the following string 2 lines, I use
Maildir here, yes that's a dot in front of /Maildir and a broken pipe in
front of if
|if test -n `fgrep -x $SENDER badmailfrom`; then echo Go Away; exit 99;
else e; fi
./Maildir/
Then put the senders email address in
PROTECTED]
To: Bob Ross [EMAIL PROTECTED]; Qmail-List [EMAIL PROTECTED]
Sent: Tuesday, July 17, 2001 6:53 PM
Subject: Re: Fw: mailbombed
I like that idea, please post.
Pat
On Tue, 17 Jul 2001 16:04:56 -0700, Bob Ross [EMAIL PROTECTED] wrote
:
There is another, but I will have to dig it up
With every email I'm getting this error in my logs. I have never seen this
before so I'm sure I missed something.
delivery 10: deferral: Unable_to_find_alias_user!/
Can someone help me with this?
Thanks
Bob Ross
..
Thanks
Bob Ross
- Original Message -
From: Charles Cazabon [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, July 15, 2001 6:04 AM
Subject: Re: Alias Error
Bob Ross [EMAIL PROTECTED] wrote:
delivery 10: deferral: Unable_to_find_alias_user!/
qmail requires a system
It gave me.
alias1000102/var/qmail/alias
- Original Message -
From: Mike Scher [EMAIL PROTECTED]
To: Bob Ross [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Sunday, July 15, 2001 12:28 PM
Subject: Re: Alias Error
Qmail makes the determination in qmail-getpw after determining
Yes it's in shadow.
- Original Message -
From: Mike Scher [EMAIL PROTECTED]
To: Bob Ross [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Sunday, July 15, 2001 12:28 PM
Subject: Re: Alias Error
Qmail makes the determination in qmail-getpw after determining the
local part:
pw
Yes it's in shadow also.
- Original Message -
From: Mike Scher [EMAIL PROTECTED]
To: Bob Ross [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Sunday, July 15, 2001 12:28 PM
Subject: Re: Alias Error
Qmail makes the determination in qmail-getpw after determining the
local part
Scher [EMAIL PROTECTED]
To: Bob Ross [EMAIL PROTECTED]
Sent: Sunday, July 15, 2001 1:21 PM
Subject: Re: Alias Error
Yes, but could you answer the questions I asked. I really cannot help you
without that information. See the questions below.
On Sun, 15 Jul 2001, Bob Ross wrote:
I get
IDs etc.
I'm using the Maildir setup.
The new system starts with user IDs much higher than what are on the old
system.
Could be a little painful to move them one at a time and chown each user.
Thanks
Bob Ross
It's in the first message you get when you subscribed.
Click on this link and send an empty email. Then do as it says to be
removed.
[EMAIL PROTECTED]
We just recompiled qmail with conf-split changed to 512 from the default
of 23. Wow we saw a huge increase in the throughput. Thanks.
Bob
. This Q keeps gettnig larger and larger. It seems as though there is
room on the box as far as IO is concerned. So I'd like to up the local
concurrency limit.
bob
qmail home directory: /var/qmail.
user-ext delimiter: -.
paternalism (in decimal): 2.
silent concurrency limit: 500.
subdirectory split: 23
is great but
again it doesn't seem to address scalabiliy issues, etc. What I'm looking
for doesn't have to be qmail specific either. Thanks.
Thanks again for the help.
Bob
On Wed, 20 Jun 2001, Charles Cazabon wrote:
-Bob C. Ruddy [EMAIL PROTECTED] wrote:
- Below is the top of the output from qmail
): No, Server Error: 553, Error
Number: 0x800CCC79
Thanks
Bob Ross
users and set them up for mail with qmail-pw2u and qmail-newu.
The problem: Whenever I send mail to a user on the system (via manual
SMTP), it is queued but never delivered. For each delivery attempt, the log
shows:
...deferral:Unable_to_switch_to_/home/bob:_access_denied._(#4.3.0)/
All the home
Thanks to everyone who replied so quickly!
The permissions on /home were indeed the problem-- it was owned by root and
had the search/execute bits for 'group' and 'other' turned off.
Fixing this seems to have completely solved the problem.
Thanks again!
-Bob
.
--
Bob Greene
[EMAIL PROTECTED]
Pull my finger for my public key
Mark wrote:
How can I configure qmail to accept mail for mail.domaina.com and
mail.domainb.com?
Nothing in the FAQ could be found.
Thanks,
Mark
Add them both to /var/qmail/control/rcpthosts
--
Bob Greene
[EMAIL PROTECTED]
Pull my finger for my public key
of Emanuel.
Jessica:
Please delouse your computer.
--
Bob Greene
[EMAIL PROTECTED]
Pull my finger for my public key
I noticed that also. Some just select reply to all, and it will go both
places, but then the person your replying to will get two of the same email
every time.
- Original Message -
From: "Casey Allen Shobe" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, October 05, 2000 9:43 PM
a
limitation to doing this, or am I really missing something.
defaultdomain
locals
me
plusdomain
rcpthosts
Any help with this would be great.
Thanks
Bob Ross
mohavevalleyaz.net
oatmanaz.net
peachspringsaz.com
templebaraz.com
topockaz.com
truxtonaz.com
valentineaz.com
wikieupaz.com
yucca-az.com
- Original Message -
From: "Chris Johnson" [EMAIL PROTECTED]
To: "Bob Ross" [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Sunday, September 24, 2000
Is there a way to customize the bounce messages on virtual/separate domains
so that they don't identify themselves as the "me" domain?
I have two domains on the box and I need the bounce message from each domain
to be specific to that domain.
Thanks in advance,
Bob
R. (Bob) Car
I am having real problems with sqwebmail. Yesterday it just stopped
authenticating users. Only if you are trying to get your mail via the
webmail, if you use outlook or something you can get e-mail no problem. I
did not do anything to it and it just stopped working. When you try to log
in
I have never had to do this before. Our new billing software does not work
if we have "." dots in the user name.
I need to remove the dots in the software but have qmail deliver the un
doted mail for those few users to their doted Mail address.
How do I do this.
Thanks
Bob Ross
tthew Patterson" [EMAIL PROTECTED]
To: "Bob Ross" [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Saturday, September 02, 2000 9:54 AM
Subject: Re: Qmail 1.03
dot-qmail(5) is your friend
MHP
- Original Message -
From: Bob Ross [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sa
It worked. Thanks.
Man this is going to save me a bunch of extra work.
Thanks
Bob Ross
- Original Message -
From: "Matthew Patterson" [EMAIL PROTECTED]
To: "Bob Ross" [EMAIL PROTECTED]; "qmail list" [EMAIL PROTECTED]
Sent: Saturday, September 02, 2000 10
been receiving a lot of errors that the server has not
responded in 60 seconds do they want to wait or stop.
Thanks
Bob Ross
Thanks
Bob Ross
droping one and
dealing with all the support calls that will be generated.
Thanks
Bob Ross
Hi
I scanned myself online using nessus/nmap (scanning my dynamic IP) and received an
email from nessus stating:
Your MTA is vulnerable to the 'mailto: files' attack. Is this a hole or a false
positive because I,m scanning myself? Any ideas how to fix this?
Thanks in advance
Bob
--
I fish
On Sat, Jun 03, 2000 at 04:09:21AM +, Jim Breton wrote:
On Fri, Jun 02, 2000 at 10:58:51PM -0500, Bob Waskosky wrote:
Your MTA is vulnerable to the 'mailto: files' attack. Is this a hole or a false
positive because I,m scanning myself? Any ideas how to fix this?
I believe Nessus
On Sat, Jun 03, 2000 at 04:29:07AM +, Jim Breton wrote:
On Fri, Jun 02, 2000 at 11:17:30PM -0500, Bob Waskosky wrote:
Is this a hole and how would I plug it?
No it's not a hole. It would only be a security concern if your mailer
were to allow the message to actually be piped
I think the example line in your reply triggered a virus alert.
I received an email stating the reply I sent possibly contained a password stealing
virus. I hope that was just triggered by your example. I don't believe I have any
viruses on this machine.
--
I fish therefore I lie.
Bob
o the only way, and it doesn't exist. You
cannot use POP3 without sending passwords in the clear.
Len.
Why not require APOP?
-- Bob Rogers
PROTECTED]
-- Bob Rogers
aildir
R. (Bob) Carpenter
CIO-Chief Information Officer
RedSea Management Ltd.
San José, Costa Rica
(506) 204-3300
(506) 204-7090 fax
PGP Key available by request.
-Original Message-
From: Petr Novotny [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 18, 2000 9:20 AM
To: [EMAIL
-p -x /etc/tcp.smtp.cdb \
-u $QMAILDUID -g $NOFILESGID 0 smtp /var/qmail/bin/qmail-smtpd 21
Thank you,
Bob
-Original Message-
From: Chris Johnson [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 18, 2000 9:31 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re
I've been running into password authentication problems with my RH 6.2
implementation. Open-ssh does weird things too... but back to qmail.
Here's the info I hope is relevant:
Telnetting into the POP3 server, fails:
[root@mercury bob]# telnet localhost 110
Trying 127.0.0.1...
Connected
something.
I have been attempting to complete the Life with qmail documentation. With
success yesterday. (Thank you again for your help!)
Here's the info I hope is relevant:
Telnetting into the POP3 server, fails:
[root@mercury bob]# telnet localhost 110
Trying 127.0.0.1...
character is '^]'.
+OK 9981.958401059@FQDN
user bob
+OK
pass xx
-ERR this user has no $HOME/Maildir
Connection closed by foreign host.
[root@mercury control]# more /var/qmail/control/defaultdelivery
./Maildir/
[root@mercury control]#
But I DO have the maildir as created by "maildirmake", no
to the localhost has been fixed
too.
I do notice that, unlike the tcpserver instructions, it does NOT echo back
the users mail directory.
Or is that not a normal function of tcpserver under Maildir?
Bob
-Original Message-
From: Timothy L. Mayo [mailto:[EMAIL PROTECTED]]
Sent: Monday, May
ut nothing gets written to disk.
Any ideas would be appreciated.
Bob Brown
At 06:13 PM 05/12/2000 -0400, Dale Miracle wrote:
Bob Brown wrote:
I've followed the steps in the Life as Qmail
document.
The install seems to have gone without a hitch--- qmail,
ucspi-tcp, daemontools. All the test along the way seem
to work. TEST.deliver works fine. TEST.receive fails
From: [EMAIL PROTECTED]
Date: Tue, 9 May 2000 08:53:33 +0200
Bob Rogers (Mon 08.0500-23:47):
Not here, but that may not mean much. My guess is that mutt is
expecting the named program to be sendmail-compatible and is passing it
extra options, but qmail-inject
From: Peter van Dijk [EMAIL PROTECTED]
Date: Tue, 9 May 2000 15:08:03 +0200
On Mon, May 08, 2000 at 11:42:37PM -0400, Bob Rogers wrote:
[snip RFC822 disallows 8-bit stuff]
This is not relevant. RFC822 talks only about headers+body. The issue in
this discussion is the SMTP
did a man on the qmail-smtpd program and it mentions something about a
rcpthosts file. How do I set that up.
With a text editor.
Is that my problem?
Thanks,
Lael Heinig
Yes. http://www.flounder.net/qmail/qmail-howto.html#14
-- Bob Rogers
= any ASCII character; ( 0-177, 0.-127.)
I haven't actually seen this particular violation in use; has anybody
else?
-- Bob Rogers
guess is that mutt is
expecting the named program to be sendmail-compatible and is passing it
extra options, but qmail-inject is not taking sendmail options. Try
set sendmail="/var/qmail/bin/sendmail"
instead.
-- Bob Rogers
.
-- Bob Rogers
Eudora(mail reader for MS Windows), can work with Maildir?
Thank you
Daniel
Turns out it doesn't matter, as long as Windows users POP their mail,
since qmail-pop3d supports maildir.
-- Bob Rogers
rse, qmail does
not, nor does the one sendmail installation to which I have access.)
[At the top of p11 are a handful of X.400 delivery-related headers,
which are probably even less widely implemented.]
-- Bob Rogers
se, we need a better reference.
-- Bob Rogers
Dave Sill wrote:
bob [EMAIL PROTECTED] wrote:
What I really mean is I can't send out mail remotely... say to my
mother-in-law for instance.
Right, and you think that's a *problem*? :-)
But seriously, what happens when you try to send remote mail? What Do
The Logs Say(tm)?
-Dave
I
Dave Sill wrote:
bob [EMAIL PROTECTED] wrote:
I have no problems fetching my mail with fetchmail but the only way I seem
to be able to get my mail is if I put a .qmail-default file in ~alias/. Any
other filename I use eg .qmail-netnet or .qmail-nobhead or .qmail-bobski
... don't work
it to a different X
recipients, then change them again . . .
(3)
How can I delete the messages waiting in the quene?
Use "touch" -- see http://cr.yp.to/qmail/faq/admin.html#rejuvenate for
the complementary problem.
Thank you for your help.
Sincerely,
Peter
Dave Sill wrote:
bob [EMAIL PROTECTED] wrote:
I have no problems fetching my mail with fetchmail but the only way I seem
to be able to get my mail is if I put a .qmail-default file in ~alias/. Any
other filename I use eg .qmail-netnet or .qmail-nobhead or .qmail-bobski
... don't work
ial code need be run at delivery time, this should be quite
robust.
-- Bob Rogers
Dave Sill wrote:
Bob Waskosky [EMAIL PROTECTED] wrote:
Hi. I'm having a very difficult time setting up my aliases. I just have
a linux box and want to use qmail/mutt for my email. My ISP POP3 email
address is [EMAIL PROTECTED] and I also have email on my virtualave
website server [EMAIL
nder address.
Instead, see http://www.palomine.net/qmail/selectiverelay.html for a
solution based on IP addresses, which makes it harder to spoof.
-- Bob Rogers
ol contain?
-- Bob Rogers
I set up my aliases so this mail is sent to
my ~/Maildir? I've been fighting with this for 2 weeks. I'm sending this
using netscape right now. How to get qmail to send outgoing smtp mail
will be my next question. Thanks in advance.
Bob Waskosky
ECTED]" as the "-f" parameter to sendmail, which
the real sendmail would reparse, but qmail-inject takes to be just the
address part. Try messing with the "Sender" controls in Mail.app.
-- Bob
ument here.
-- Bob Rogers
for sysadmins to see the content of double bounces so
that they can distinguish spam from misconfigured local users.
Speaking of which, I notice that your "from" address and your
"reply-to" address are different . . . ?
-- Bob Rogers
ve left you in the same boat, or worse, since this is
really an MUA configuration issue than an MTA configuration issue
(ignoring religious skirmishing over who's responsible for what).
Besides, somebody said Corel doesn't ship qmail configured anyway.
-- Bob Rogers
vouch that the Red Hat 6.0 /bin/mail uses sendmail. Just do
echo Testing | /bin/mail $USER
and see whether or not it goes to /var/spool/mail/$USER, or your qmail
drop.
-- Bob
problems, or a long period of
inactivity. Account: 'beginners101.com', Server: 'beginners101.com',
Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800CCC0F
Thanks
Bob Ross
=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
Now offering Wireless Internet service
in the Kingman Area. Starting at $39.95
he installed qmail, and we never managed to figure out why
not.
Thanks,
e
I'd be happy to help you, but this is really not a qmail question (or
even an rmail question), so further correspondence should be off-list.
-- Bob Rogers
Funny problem.
I installed Qmail on a newly installed Slackware 7.0, It shows that it has
started etc.., when I send email to that system, I receive the following
error.
Sorry, I couldn't find a mail exchanger or IP address. (#5.4.4)
What did I miss.
Thanks in advance
Bob Ross
nutes? If it is off a few minutes, I
can work with that.
I think he means that it is too easy to update the access timestamp by
accident, e.g. by doing a backup.
-- Bob Rogers
;
a better solution would be to get another ISP.)
-- Bob Rogers
poster meant the following:
We have MUAs [which are also IMAP clients] that access these files
directly off the unix box [using file access], . . .
Doesn't seem likely, but the original statement struck me as somewhat
ambiguous . . .
-- Bob Rogers
if
the problem is something a postmaster can help with.
Users reply to the damnedest things. If an MTA is configured to
generate mail from "rumpelstiltskin", then it ought to be configured to
accept mail for "rumpelstiltskin" as well.
-- Bob Rogers
theory is that it's a bad alias. I shot myself in the foot this
way last month, but got a different message because I was using mbox
format, so I can't yet tell whether you've done the same.)
-- Bob Rogers
r to recipient, the MTA
cannot arbitrary change this choice by dropping a BCC header.
This seems to be the consensus of the list -- that headers are
untouchable after "injection" -- but I wanted to point out how RFC822
supports this.
-- Bob Rogers
Let me ask a silly question: Does each owner own his/her ~/Maildir/
tree?
-- Bob Rogers
to mbox format, rather than Maildir,
since my needs are simple . . .
Thanks in advance,
-- Bob Rogers
I am having a problem with qmail sending the same messages to the same
person 3 or more times. The messages are not all being sent at the same
time and it does not happen to all the users. The logs show that it is the
same from, to and the same message ID..
Could anyone give some thoughts
I have a bunch of messages 500+ sitting in my queue for an address that
doesn't exist. Is there a way I can dequeue all messages queued up for
that email address?
Bob
.
Bob
ests until they finally got around with it.
When I killed my account with them, I told them (yet again) that it was
simply because of their refusal to implement a properly behaved mail
server.
They could not have cared less. So, neither did I.
In summary: sixdegrees is lame.
// bob
--
// Bo
sing a few error's.
Thanks
Bob Ross
sing a few error's.
Thanks
Bob Ross
certian domains or users in a allowfromfile. Should be the oposite of
denyfrom but me not knowing programing for qmail have been hitting a lot of dead
ends.
any help would be great.
Thanks in advance.
Bob Ross
Is there a way to change this code from a user
.qmail to only allow users or domains listed in the file.
|if test -n "`fgrep -x $SENDER badmailfrom`"; then
echo Go Away;exit 99; else exit 0; fi
Thanks
Bob Ross
tried to send mail to it and would receive
the error in the logs unable to establish an smtp connection.
Thanks for any help in advance.
Bob Ross
do I find documentation
on how to edit /var/qmail/users/assign. The question is very specific and
to the point. So please think before you flame. Thankyou for your answer.
Bob
windows the auth fails and asks me to enter the password again.
I did re-did the password three times to make sure and it still fails on
all mail programs.
Thanks in advance
Bob Ross
don;t think this could be a problem
because it still doesn't start from a re-boot.
Even after changing the spelling of checkpassword I still get the auth
failed.
I have looked in the Makefile and can not find where to tell
checkpassword that I'm using shadow passwords.
Thanks
Bob Ross
mail to local users but that is it.
I'm running the smtp part of qmail through inetd but I am looking at
tcpserver now. Thanks for your help
Bob
PS qmail is great! I set it up about 10 months ago and havn't had to touch
it till now.
list of allowed rcpthosts (#5.7.1)
What did I miss??.
Thanks in advance.
Bob Ross
I just started learning Linux last week and am installing a few internet
services to include qmail.
When I send an email to [EMAIL PROTECTED] my /etc/maillog reports that
everything went fine, however when I try to retrieve the email using
POP3 I have no messages. And when I look in /home/bob
An interesting side-note I thought I'd add, qmail-inject from the command
line works perfectly. Using qmail-inject the message goes to
~bob/Maildir/new the way it's suppose to. So the question still stands, how
do I configure qmail-smtpd to place mail where it's supposed to?
The SMTP entry
I would like to thank everyone who replied to my "install problem post". I have
decided to reinstall with a source distributution of
qmail 1.03 and read all the install docs.
Thanks again
Bob
my server
- ps xindicates that sendmail is not active
- executed previous rpm command with same results.
Please reply to news group and my email address.
TIA
Bob
checkout the following url:www.profuso.com/EN/products.html
Bob
[EMAIL PROTECTED] wrote:
Alejandro Flores arranges the bits to say:
Im interested in build a free mail service just like hotbot or Rocket mail
i heard that qmail can help me on this ...
Does anybody know how can i
1 - 100 of 102 matches
Mail list logo
