. Actual sizes of the
plastic and metal and tolerances can be off creating issues.
Just not worth it in my view.
My 2cents
Jay
> On Aug 25, 2019, at 5:40 PM, Glenn Burt wrote:
>
> I see that Canadian Solar has some official looking report from Chinese CSA
> stating that
A question for the power wall installers out there
If I understand correctly, the customer buys the powerwall from Tesla directly
and then pays you for the install?
Does Tesla have any control or influence over the install cost?
Thx
Jay
___
List
/240v, outback
Backup generator installed just outside of the power shed.
I’m confused as to what labeling I need in the power shed.
And
Can I get away with a “authorization personal only” on the door instead? And
if so what would be the code reference
Thx
Jay
I was thinking that there might be some kind of solid state electronic version
now?
Jay
> On Aug 6, 2019, at 8:59 PM, Mark Frye wrote:
>
> Years ago I used something called a RotoPhase Phase Converter to supply some
> 3ph equipment on a site that only had 1ph (2ph?). Not efficie
Hi all
Is there a way to convert a 120/240v generator to a 120/208 3 phase output?
Thx
Jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://list
HI All,
I’m wondering if there is any programs/apps that do inter row shading?
I can’t find any.
RBI used to have one, it was really slick.
Thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re
I was just reminded that exeltech can do up to 125kw.
Jay
> On Jul 21, 2019, at 3:05 AM, Tump wrote:
>
> Victron has the Quattro 10kW inverters w/ 100A pass thru and they have a good
> battery management for their Li battery line. They have also started to have
> th
The other 2 that I can think of are Pika (not sure they can parallel stack) and
Princeton energy for an all in one unit.
Yea so far Schneider can only do 4 x 6800w single phase.
Jay
> On Jul 20, 2019, at 2:13 PM, Mac Lewis wrote:
>
> I think Outback is the only major inverter man
Hi Marco,
Is the max surge 7kw, which is what is listed on line?
Jay
Peltz Power
> On Jul 19, 2019, at 3:10 PM, Marco Mangelsdorf wrote:
>
> Seven to eight Tesla Powerwalls will get you that assuming that the service
> entrance is no bigger than 200A.
>
> marco
>
Hi dave
Radian Control boards can definitely be field replaced. Done it many times
Try kris stone. Hes ex outback tech, sells replacement parts, solid advice.
Jay
Peltz power.
> On Jul 1, 2019, at 8:32 AM, Dave Tedeyan wrote:
>
> Hi All,
> I thought I would pick the hive mind
://www.chiliconpower.com/ <https://www.chiliconpower.com/> ) inverters.
US made. And probably biggest pro is that they use #10 wire so much larger
string length.
Jay
Peltz Power
> On Jun 30, 2019, at 6:40 AM, Amanda Potter
> wrote:
>
> Hello Wrenches,
> I’ve got three GTBB ins
Hi all,
I’m looking for any comments about the APS micros.
And of course compared to enphase
Thx
Jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://list
will handle minor debris and
do limited suction.
The same controller for the submersible will work for that pump as well.
jay
peltz power
> On Jun 19, 2019, at 5:47 AM, Mac Lewis wrote:
>
> Hi wrenches,
>
> Does anyone have a recommendation for a solar pump that fits these
really flexible.
jay
Peltz Power
> On Jun 15, 2019, at 8:42 AM, William Miller wrote:
>
> Friends:
>
> I keep discovering systems with this error message. I have not drawn any
> conclusion as to the ramifications of this problem. Will this cause a system
&
So zomeworks is done?
Darn
They used propane I believe for a lot of years. I think Freon maybe in the
early days.
Jay
> On Jun 14, 2019, at 1:49 PM, Andrew Truitt wrote:
>
>
> Sulas is pretty new, but I've heard good things. The concept is similar to
> Zomeworks, b
you want flush, then before the last module goes
down, measure and cut rail, then install the module.
Jay
> On Jun 13, 2019, at 5:47 AM, Benn Kilburn wrote:
>
> I’ve been looking at picking up a portable bandsaw, likely Makita but a
> reciprocating saw has served me very well ov
control and if that fails we go to #3
3. SS relay control on GT inverter output via inverter control
My question is this: Does anyone know the time between when the XW+ sees the
voltage and then gets to the 64hz for regulation?
thanks
jay
peltz power
Does anyone know if the remote display cable is the same as the stacking cable?
For the trace/xantrex SW.
thx
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address
live but it doesn’t really get cold enough for it to be
an issue.
Great stuff
jay
> On May 17, 2019, at 9:19 AM, Sindelar Solar wrote:
>
> Jay,
>
> I faced this issue recently with a Blue Ion system. Blue Planet tech support
> sent me a clear description of the soluti
HI All,
I”m wondering if anyone has suggestions about how to charge a Lithium battery
in RV or in this case Polarius in sub zero temps.
Are there batteries that have heaters built in, or is it still a custom design
issue to build a heating system?
( insulation and heaters)
Thanks,
jay
options folks are using out there?
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenche
understand SOC meter on the wall is important to
them.
So wondering if folks have answers?
Thanks
Jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://list
Hi all
By chance I had someone ask me about Discover lead batteries
OPzS, OPzV
I very much like the clear flooded cases.
I’m just wondering if anyone has used them or has any thoughts about them.
Thx
Jay
Peltz power.
___
List sponsored by
Hi Mark
Koehler Model #
6VSG-QS14.
Is a dc air cooled. Probably not the quality of the polar water cooled.
Jay
Peltz power.
> On May 4, 2019, at 10:20 AM, Mark Frye wrote:
>
> Folks,
>
> Has anyone had the chance to work with the Polar Power DC generators s
I’ve used the Orion jr on a few Polaris ev and have
had a lot of issues. Takes a computer to fix.
It doesn’t seem very stable.
Jay
> On May 3, 2019, at 3:47 PM, Andrew Truitt wrote:
>
>
> Wrenches - I have an opportunity to take possession of some lightly used 2
> kWh Lis
HI Drake,
I’ve used
https://stormpowercomponents.com <https://stormpowercomponents.com/>
jay
peltz power
> On Apr 30, 2019, at 10:26 AM, Drake
> wrote:
>
> Hello Wrenches,
>
> I am wiring a set of 2 V Concorde batteries for 48 V. Each battery has 2
> terminal
Hi peter.
Check amazon or eBay etc. lots of cheap Chinese small inverters.
Jay
> On Apr 28, 2019, at 8:18 PM, Peter Parrish
> wrote:
>
> I replaced a number of AES (?) 120 Vac 1 kW grid tied inverter back when I
> was just starting out (2000) There was one poor design elem
Hi Will,
Sorry, didn’t mean too.
Reading between the lines, once inspected the faulty breaker was somehow
replaced with a normal one.
And so to my question, at this point they are no known arc/ground fault
backfeed approved rated breakers?
Jay
> On Apr 25, 2019, at 11:45 AM, Will Wh
Hi all,
For micro inverters, what OCP is available for ground fault ( or arc fault)
for roof top mounted on a living structure?
Thx
Jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email
Hi Mac.
2 questions I have are, what is the soc at 2 min start?
And
How long does it take to get absorb volts
Thx
Jay
> On Apr 20, 2019, at 6:18 AM, Mac Lewis wrote:
>
> Thanks for all of the comments. My big question is do these batteries
> operate at lower voltages tha
is OB spec?
Jay
Peltz power.
> On Apr 19, 2019, at 10:27 AM, Mac Lewis wrote:
>
> Hello Wrenches,
>
> We recently inherited an Outback system that I've been keeping an eye on via
> Optics. Its a dual stack 3648 VFXR, with about 4kW of PV with a single
> string of
For the Radian
Page 59 of the operators manual ( it’s a different set of environmental
specifications than the install manual or data sheets)
2000m max altitude.
Jay
Peltz power.
> On Apr 16, 2019, at 12:11 PM, wrote:
>
> Let’s see it in writing, in the manuals included with the c
reconditioned/short warranty
boards or new with full warranty for FX/VFX.
As to 28kw, I’d go with the 4 Radian vs 8 stack FXR.
jay
peltz power
> Begin forwarded message:
>
> From: Greg
> Subject: [RE-wrenches] Outback VFX 3648 tech support and parts
> Date: April 13, 2019
and the
controllers are performing great, but wonder if that will be an issue in
the future. It would be great if some manufactures would give us a
quality, competitively priced, equipment that is rated for altitude, but I
don't think there are that many options out there
HI Jerry,
Bryan at PV cables stocks most of the WEEB/Hubbell parts.
707-923-3000 pacific time
jay
peltz power
> On Apr 9, 2019, at 3:22 PM, Jerry Caldwell wrote:
>
> Wrenches,
>
> Does anyone know where and if you can still get WEEB-ADR clips? I need 1,900
> of them ra
Hi Rich,
This appears to be a newer thing with magnum. I’ve seen this and it’s been
commented previously here on the wrenches. Doesn’t appear to be load or charge
related.
It’s definitely not on the older models.
Magnum says that this voltage fluctuation is normal operation.
Jay
Peltz
gauge and for Schneider, they are Xanbus comm ready.
Jay
Peltz Power.
> On Mar 29, 2019, at 8:51 AM, Howie Michaelson
> wrote:
>
> Jerry,
> I'm looking at all the lithium options out there for an application phycisist
> client who wants a lithium backup system. C
Hi Christopher
I’d look at Discover battery.
Have external monitors, battery to battery comm
And Xanbus if you have Schneider inverters.
It seems more advanced than Simpliphi
Jay
Peltz power.
> On Mar 28, 2019, at 1:12 PM, Lorenzo Ortiz wrote:
>
> Simpliphi has 24V Lithium
>
Hi All
I’m in need of a few single string 600v nema 1x discos.
I’ve been looking at the IMO brand, they fit the bill and are low cost.
Any comments pro/con and recommendations as to where to get them?
Thx
Jay
Peltz power.
___
List sponsored by
Hi Drake,
Can you explain the diversion load more.
Dc or ac
Size, Watts
What type of load
How is it turned on, off
My reasoning is that you seem to point to a connection between diversion load
and shut down.
Thx
Jay
> On Mar 19, 2019, at 6:25 AM, drake.chamber...@redwoodalliance.
Hi Jason
Talk to Bryan at PV cables
707-923-3000
He’s got the Rennsteig tool for under $200 and the MFG tool for just under $300
Jay
Peltz power.
> On Mar 6, 2019, at 2:20 PM, Jason Szumlanski
> wrote:
>
> Is there a reasonably priced alternative to the Multi-Contact
catching on fire)
Cycle life
Just sucks seeing people getting screwed.
Jay
> On Mar 4, 2019, at 5:23 AM, Kienan Maxfield wrote:
>
> Hello all,
>
> I just got back from looking at an off-grid system that is only about 4
> months old or so, and it has several problems. I have
Hi all,
Does optics RE have a history of changes made to setpoints/settings?
I’m pretty sure not, but wanted to check,
Thx
Jay
PS. And if not might be a good thing to add?
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re
side?
Thanks in advance
Jay
Peltz power.
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
HI William,
You might look at
http://www.franklinwater.com/products/packaged-systems/solar-products/subdrive-solarpak-075-3hp/
<http://www.franklinwater.com/products/packaged-systems/solar-products/subdrive-solarpak-075-3hp/>
UL listed.
Jay
peltz power
> On Feb 6, 2019, at
.
thx
jay
> On Feb 2, 2019, at 12:47 PM, Dan Fink wrote:
>
> A very common way around rapid shutdown for off-grid systems especially with
> ground or pole mounts is using a "power shed" for the BOS components.if
> it is not inhabited / uninhabitable then rapid shutd
HI All,
Well its the new year and Module level control is here. 690.12 (B)(2)
Does anyone have any updates as to products that work with CC's that meet it?
Thx
jay
Peltz Power
___
List sponsored by Redwood Alliance
List Address: RE-wre
The prices are all in Australian $, which I assumed this list is just for the
ozzy market.
Jay
> On Jan 25, 2019, at 9:47 PM, Jerry Shafer wrote:
>
> Marco
> I do not see Blue planet Blue Ion Batteries which are UL listed and have a 15
> year warranty and are a proven trac
Hi all,
In regards to signing up for the special code. Does anyone know how long it
takes to get a response?
It’s been 2 days now and so far no return email with the “code”
Jay
Peltz power.
> On Jan 10, 2019, at 12:03 PM, Michael Welch
> wrote:
>
> Hi gang. I am posting th
Hi August
Did you tell us how many kW of battery inverter you needed?
Jay
> On Jan 11, 2019, at 6:40 AM, August Goers wrote:
>
> Thanks All for the ideas. For the battery inverters, I'm most interested in
> sticking with SMA or Schneider which I've had good experien
Hi all,
I had someone send me this link about a battery storage device that fits under
the modules.
Curious if anyone has seen it, knows anything about it, or opinions?
https://simplglobal.com/
It doesn’t seem right to me.
But I bet someone out there knows more,
Thx
Jay
Peltz power
HI Mac,
I wondering if you know which SMA GT inverters communication with the SI?
thx
jay
> On Jan 8, 2019, at 1:02 PM, Mac Lewis wrote:
>
> Hi August,
>
> The limitation with the Sunny Island, (if you don't go 3 phase), is a quad
> stack of 6048s in a 120/240 s
=item5d781f904d:rk:16:pf:0
Its a direct copy/knockoff of the shurflo.
jay
> On Jan 8, 2019, at 1:25 PM, Michael Welch
> wrote:
>
> Hi Bill and all. Windy was having troubles getting this to post, so he asked
> that I post it on his behalf:
>
> Bill,
>
> I agree, mostly, wit
HI Dan,
I’d like to know more about the system:
battery brand
size of the PV
voltage
jay
peltz power
> On Jan 7, 2019, at 6:46 AM,
> wrote:
>
> I've been asked to trouble shoot a problem with a new set of LiFePO4
> batteries on an older OB system.. The customer complai
running watts as a bare
minimum. And specify a pump that is pumping in the bottom of the curve instead
of near the top helps to allow it to produce better during lower PV watts input.
Good luck,
Jay
Peltz power
> On Jan 2, 2019, at 4:44 PM, William Dorsett wrote:
>
> Happy
at closer to the $145 kWh?
Thanks
Jay
Peltz power.
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenche
Hi Mac,
There is the Morningstar TS-MPPT-60-600V-48-DB-TR
It’s got a transfer switch inside.
But maybe you want something different?
Jay
Peltz power.
> On Dec 19, 2018, at 4:50 AM, Mac Lewis wrote:
>
> Hello Wrenches,
>
> Does anyone have a recommendation for a DPDT 600 V
Hi All,
I was recently looking at the AIMS website and they show 30-200kw battery
inverter.
I was wondering if anyone has used them or has anything to say one way or the
other?
Or has recommendations to other brands for same sort of sized inverters.
thx
jay
peltz power
HI Kirk,
SE bought BYD battery and I expect you’ll see them and not LG Chem.
As to when, that I don’t know, but would expect pretty soon.
jay
peltz power
> On Dec 14, 2018, at 6:43 AM, Kirk Herander wrote:
>
>
> Does anyone know when LG chem batteries for Storedge inverters
Hi Louis
Again, magnum admitted to the issue, gave no fix.
I checked with RE-Wrenches as someone might have figured a work around.
Jay
> On Dec 12, 2018, at 8:11 PM,
> wrote:
>
> Jay,
>
> I have not seen this, yet.
> If you go into the Magnums remote and look at AC
inverter and that
somehow this “feature” has to do with it being able to AC couple better.
I’m writing to ask if others have seen this as well and more importantly if
anyone has a fix?
Thanks,
Jay
Peltz Power
___
List sponsored by Redwood Alliance
cycles to 50%, vs Full River or Rolls AGM at around 1300 cycles
to 50%.
VRLA are a pretty tricky compared to flooded.
jay
peltz power
> On Nov 29, 2018, at 8:33 AM, Starlight Solar Power Systems
> wrote:
>
> Let me confirm what William has shared about Deka/MK 8D AGM batteries;
Hi Allan,
You check Rolls, which has a similar battery.
Jay
Peltz power.
> On Nov 28, 2018, at 10:43 PM, William Miller wrote:
>
> Allan:
>
> We have had poor luck with the 8D AGM batteries (MK/Deka). Many of them have
> had short life spans along with swelling
HI All,
Anyone install a Skybox yet?
And if you have comments?
My questions are:
Does it have module level shut down capabilities?
Does it need or can it use the mate 3s or does it use some other device?
thx
jay
peltz power
___
List sponsored
r 48v battery:
Charge to 60v
4-6 hrs
Charge first thing in the am
3 days in a row
1 x year
Jay
Peltz Power
> On Nov 22, 2018, at 8:23 AM, Dan Fink wrote:
>
> All; I forgot to note that with the AGMs a full equalization that could
> temporarily stave off problems across the mas
HI Bruce,
OB specifies 2000 watts STC max for the FM-80 at 24v.
Gotta say I've never measured 3X solar irradiance, impressive.
jay
peltz power
> On Nov 22, 2018, at 7:37 AM, Solar wrote:
>
> I live in Northern MN and we get very cold days (-50F +) and very crisp clear
&g
Hi Dan and Kienan
I’m curious how much water you are adding monthly?
Jay
Peltz Power.
> On Nov 22, 2018, at 7:08 AM, Dan Fink wrote:
>
> Wrenches; I have run my house on 12 volt NiFe batteries for 3 years now. I
> was going to write a long essay, but Kienen beat me to
As we are talking about the IronEdison batteries.
I checked their site about lithium and they claim to have a BMS that will
communicate with Outback.
I didn’t think anybody had comm with OB?
Can anyone confirm that?
jay
Peltz power
> On Nov 21, 2018, at 11:36 AM, Ken Schaal wrote:
>
as a top end Lithium battery, I’d
go for the Lithium if someone has that kind of cash to throw around.
Jay
Peltz Power.
> On Nov 21, 2018, at 10:37 AM, Ray wrote:
>
> Charge efficiency is really low, Charging parameters can be hard to get
> right, Voltage is not stable under
Does Schneider have videos of how to operate the SCP etc?
Jay
Peltz power.
> On Nov 18, 2018, at 7:41 AM, Howie Michaelson
> wrote:
>
> Drake,
> It took me years to try Trace/Xantrex/Schneider products after swearing off
> Xantrex in 2004, becoming an Outback devotee for a
Hi william
Very tech fix with the relay!
Fortunately or unfortunately there is no reliable web at the location but
someone who manually checks things.
Yes the 3s still has some of the same problems
Thx
Jay
Peltz power.
> On Nov 16, 2018, at 2:14 PM, William Miller wrote:
>
change.
thx
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
Hi Jerry
Vaccine refrigeration
Jay
> On Nov 13, 2018, at 12:47 PM, Jerry Shafer wrote:
>
> Jay
> I have done ACDC refrigeration, how big of a unit are you looking for,
> apartment size or container size. Bigger is almost easier, need info before.
> Jerry
>
>>
Hi all
I’m looking for recommendations on vaccine refrigeration.
It’s for buddy in west pacific which was just pounded by strongest typhoon
ever.
Thx
Jay
Peltz Power.
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re
Hi all,
As a lithium battery ages, does the voltage keep it’s flat line steep curve but
just start it’s drop at a higher voltage or does it have more of a gradual
voltage drop?
Thx
Jay
Peltz power.
___
List sponsored by Redwood Alliance
List
HI All
I”m trying to locate another ( or Similar) VonWeise V76-5 actuator for an older
wattsun smaller tracker.
I’ve only found 1 used one on Ebay. Any ideas?
thx
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches
HI All,
Has anyone used or know anything about MPPsolar equipment. Inverters, CC etc.
It would be for international work.
thx
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver
recommended to clear it at least every 6 months.
And even with current firmware and clearing memory, I still see it happen.
Jay
> On Oct 10, 2018, at 4:51 PM, Dana wrote:
>
> My learned fellow Sparkies,
>
> I have at home off-grid Radian with Mate 3 monitor. Periodically &
HI All,
Has anyone installed, seen, used or priced the Deka Ultrabattery for stationary
applications? ( solar)
Thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email
Hi all
What is the news on the skybox?
Last I checked it was still MIA
Jay
> On Sep 25, 2018, at 9:13 AM, Jeff Clearwater
> wrote:
>
> Hi Dave and All.
>
> Reasons for HV batteries off grid?
>
> 1) Smaller cable size (I just did an 18 Kw off grid with 4 SI
the county, he had the
money to install the 500mcm as a neutral.
I have been just trying to educate myself for future projects and as often is
the case with me and the NEC, its more complicated that I thought.
jay
peltz power
> On Sep 23, 2018, at 10:26 AM, Drake
> wrote:
>
&g
/L2
Thanks in advance
Jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
Iron ridge has a 3” option
> On Sep 20, 2018, at 2:15 PM, Jason Szumlanski
> wrote:
>
>
> I wish! 180mph, Exposure Category D - about as bad as it gets in the US. I
> don't think pole mount will work around here. We need a really beefy
> structure. It's probably going to have to be custom.
Mac
Look at the grundfos RSI
It’ll go up to 37kw for standard 3 phase pumps.
At 37kw it’s 480 3 phase output and 1000vdc input if I remember correctly
Jay
> On Sep 20, 2018, at 10:04 AM, Mac Lewis wrote:
>
> Hello Wrenches,
>
> This is a larger volume pumping applicat
Thx Brian.
I guess I was thinking that 50kw + was probably
A darn big house and probably be outbuildings
that the inverters would be installed on.
Yea bringing 1000vdc to a house is a bit much but then
we said that with 600v too.
Jay
Peltz power
> On Sep 18, 2018, at 6:34 PM, Br
Does anyone make a 1000vdc single phase inverter?
Would reduce wire costs dramatically
Jay
Peltz power.
> On Sep 18, 2018, at 11:36 AM, Lorenzo Ortiz wrote:
>
> Thanks for all the input guys. After looking at the 3 phase with transformer
> options with some transformer manufac
HI Harry,
The battery is charged from the AC side correct?
And is the charging algorithm inside the ABU.
If so why couldn’t you use a generator to charge the battery?
jay
peltz power
> On Sep 13, 2018, at 7:10 AM, Harry Mahon
> wrote:
>
> Marco –
>
> The Sunny Boy
HI Drake,
Can you upload that http again? The link doesn’t work.
thx
jay
> On Sep 15, 2018, at 7:39 AM, Drake
> wrote:
>
> Is this what you are referring to?
> http://en.byd.com/energy/download/high-voltage/B-Box%20High%20Voltage%20Specification.p
>
>
> At
HI Will,
I found this unit from Japan.
Hioki CM4372
jay
peltz power
> On Sep 13, 2018, at 5:28 AM, Will White wrote:
>
> Hello Wrenches,
>
> I've started doing some work on 1,000 VDC systems so I need to upgrade my
> meters. What I'd really like is a clam
default!
Jay
Peltz power.
> On Sep 11, 2018, at 5:44 PM, Mac Lewis wrote:
>
> Hello wrenches,
>
> I inspected a system that another company had installed. It had single
> string of 12 x Trojan L16RE-2V batteries about 2 years old. They had
> experienced a battery me
HI Steve,
I’d look at the Rolls Gel S2-2160. 2437 ah at C/20
3700 cycles to 50%
I don’t know what the cost comparison is between the OB, Rolls and GS SLR
batteries,
jay
peltz power
> On Sep 11, 2018, at 12:44 PM, Steve Romo
> wrote:
>
> Good afternoon everyone,
&
segment of the industry and its really hard to keep
up, or at lease me anyway.
I very much understand this is a very personal subject, and I know there will
be lots of opinions out there!
thanks
jay
peltz power
___
List sponsored by Redwood
under warranty
Jay
Peltz Power.
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Arc
fridge,
no defrost?
Happy shopping
jay
peltz power
> On Sep 8, 2018, at 10:25 PM, Tom at wagonmaker wrote:
>
> Almost 25 years ago, when we built our off grid home, we looked at the
> limited options then available one of which was the Sunfrost. After looking
> into thing
Hi Chris,
In regards to wattsun, which controller are they using? The website doesn’t
give any details.
The last one I did used a quite complicated one and it didn’t have easy to use
external manual controls.
Thx
Jay
Peltz power.
> On Sep 6, 2018, at 1:13 PM, Chris Schaefer wr
are expensive and could be a big rabbit hole.
thanks
jay
> On Sep 5, 2018, at 4:44 PM, Ray wrote:
>
> Sorry I can't help with specific models, but my guess is that most dimmers
> will work. They will probably buzz annoyingly due to the mod sine, and
> probably die
HI All,
I’m asking the group for a very obscure piece of information.
I have someone with an very old Trace 2012 mod wave form inverter and wants to
use their new LED bulbs with a dimmer
Does anyone know of any LED/dimmer combos that will work?
thanks in advance
jay
peltz power
Hi all,
I’m wondering about which apps people are using for determining shading and sun
position.
Thx
Jay
Peltz Power.
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address
Hi Dan
For larger uses, buying 55 gallon drums is usually best if you can’t get bulk
delivery.
Where I live, they deliver kerosene though.
Jay
>
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Cha
.
My 2 cents
Jay
Peltz Power.
> On Aug 24, 2018, at 2:56 PM, Daniel Young wrote:
>
> Drake,
>
> The best thing to minimize blower power draw will be two fold.
> Get the smallest BTU furnace you are allowed to (with and ECM blower). Since
> blowers are generally sized
601 - 700 of 1710 matches
Mail list logo