Re: [RE-wrenches] Remote Sunny boy Monitoring

2013-02-22 Thread John Berdner
suppliers of directional 2.4 Ghz antennas. Here is a link to a 24 dB antenna from a local CA retail electronics house. http://www.frys.com/product/7411495;jsessionid=5vsRnGBpd1iiZqjr7HmfLg__.node2?site=sr:SEARCH:MAIN_RSLT_PG Best Regards, John Berdner General Manager, North America SolarEdge

Re: [RE-wrenches] wrenches] Lorentz Pumps

2013-02-20 Thread john
I am in the same camp as Allan, I have a Lorentz pump in my 800' deep well that has been working since 2001 (12 years) We have had several controller... started with direct solar and then batteries, then replacement due to failure but the pump itself has been flawless. John Blitter

Re: [RE-wrenches] CIS mods

2013-02-18 Thread John Berdner
Light soaking = exposed to sunlight for some period of time in order to complete light induced degradation (or apparently light induced enhancement). Best Regards, John Berdner General Manager, North America [cid:image001.jpg@01CE0E09.55EDDEB0] SolarEdge Technologies, Inc. 3347 Gateway

Re: [RE-wrenches] Sunny Island DC wire size

2013-02-13 Thread John Berdner
otor starting) this will not be an issue. 48 kVA seems like one heck of a surge but, then again, I have not seen the customer's home :) Best Regards, John Berdner General Manager, North America [cid:image001.jpg@01CE09F2.47122470] SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fr

Re: [RE-wrenches] Hawaii Frequency Settings

2013-02-04 Thread John Berdner
, John Berdner General Manager, North America [cid:image001.jpg@01CE0302.850C5940] SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3200, X 747 M: 530.277.4894 From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches

Re: [RE-wrenches] Sunny Island DC wire size

2013-02-04 Thread John Berdner
typically while charging not when inverting and I set the current limit so that I do not exceed ampacity of 2/0. In my experience it takes >= 14kW generator to drive a pair of SI's to full power while charging Best Regards, John Berdner General Manager, North America SolarEdge Technolo

Re: [RE-wrenches] wrenches] Husqvarna 5500 and VFX3524 Compatibility question

2013-02-01 Thread john
John,    Thanks for that bit of information.  I have a customer with a SB5000 and recently added a Sunny Island with 8 L16 batteries.  This answers their question as to what they will do in an extended outage with no sun.  I wanted to suggest a small backup generator but wasn't sure h

Re: [RE-wrenches] Husqvarna 5500 and VFX3524 Compatibility question

2013-01-31 Thread John Berdner
SMA Sunny Island also does this but also discharges battery in parallel with the generator to create a "virtual generator" that is larger than the actual generator. Just set the max generator current and it does the rest. Best Regards, John Berdner General Manager, North America [ci

Re: [RE-wrenches] Dc Power Supply on Microinverter input

2013-01-29 Thread John Berdner
tance between the supply and the inverter to get it to track right. Best Regards, John Berdner General Manager, North America SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3200, X 747 M: 530.277.4894 -Original Me

Re: [RE-wrenches] high insolation value and inverter undersizing

2013-01-28 Thread John Berdner
. Best Regards, John Berdner General Manager, North America [cid:image001.jpg@01CDFD3C.B73855C0] SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3200, X 747 M: 530.277.4894 From: re-wrenches-boun...@lists.re-wrenches.org [mai

Re: [RE-wrenches] high insolation value and inverter undersizing

2013-01-28 Thread John Berdner
winter day. @ Marco: does your weather data source have a database of insolation and temperature over the year ? Best Regards, John Berdner General Manager, North America SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.320

Re: [RE-wrenches] 24V Module Query

2013-01-25 Thread John Berdner
(also required by NEC). Best Regards, John Berdner General Manager, North America [cid:image001.jpg@01CDFAC6.C81684C0] SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3200, X 747 M: 530.277.4894 From: re-wrenches

Re: [RE-wrenches] lithium batteries

2013-01-25 Thread John Berdner
Regards, John Berdner General Manager, North America SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3200, X 747 M: 530.277.4894 -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches

Re: [RE-wrenches] 24V Module Query

2013-01-24 Thread John Berdner
free to contact me if you have any questions. Best Regards, John Berdner General Manager, North America [cid:image001.jpg@01CDFA39.F671DEB0] SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3200, X 747 M: 530.277.4894 From

Re: [RE-wrenches] Equipment Rating vs. Terminal/Lug Rating

2013-01-24 Thread John Berdner
to make sure the terminal at the other end also meets NEC requirement at the conditions specified by the manufacturer of that equipment. Best Regards, John Berdner General Manager, North America [cid:image001.jpg@01CDFA3C.9E6DCC30] SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont

Re: [RE-wrenches] GEC for Micro-Inverters and ACPV Modules

2013-01-17 Thread John Berdner
) copper to aluminum. Best Regards, John Berdner General Manager, North America [cid:image001.jpg@01CDF488.819E0980] Solaredge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3201 ext 747 M: 530.277.4894 From: re-wrenches-boun...@lists.re

Re: [RE-wrenches] off grid PV connected to generator

2013-01-16 Thread John Berdner
st Regards, John Berdner General Manager, North America [cid:image001.jpg@01CDF3D0.4AE4FB00] SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3201 ext 747 M: 530.277.4894 From: re-wrenches-boun...@lists.re-wrenches.org

Re: [RE-wrenches] GEC for Micro-Inverters and ACPV Modules

2013-01-15 Thread John Berdner
agree. No matter... the industry moving to ungrounded systems which eliminate the need in another way. This is but one of many reasons I like ungrounded arrays. Best Regards, John Berdner General Manager, North America SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA

Re: [RE-wrenches] GEC for Micro-Inverters and ACPV Modules

2013-01-15 Thread John Berdner
main criteria is if array conductors are, or are not, bonded to ground by the inverter (which is not necessarily related to a specific topology). Best Regards, John Berdner General Manager, North America SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of ou

Re: [RE-wrenches] GEC for Micro-Inverters and ACPV Modules

2013-01-14 Thread John Berdner
then the inverter requires a GEC with all the related requirements - no if and's or but's. Best Regards, John Berdner General Manager, North America SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3201 ext

Re: [RE-wrenches] GEC for Micro-Inverters and ACPV Modules

2013-01-14 Thread John Berdner
module in the field does not make it a Listed ac module. Best Regards, John Berdner General Manager, North America SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3201 ext 747 M: 530.277.4894 -Original Message

[RE-wrenches] L

2013-01-10 Thread John Blittersdorf
Sent from my iPhone ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/piperma

Re: [RE-wrenches] Point of Connection 705.12D2 Exception

2012-12-31 Thread John Berdner
mer feeding the service >> might<< be helpful in overcoming this objection (assuming the transformer is big enough to support your onsite generation). Best Regards, John Berdner General Manager, North America 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of

Re: [RE-wrenches] Point of Connection 705.12D2 Exception

2012-12-30 Thread John Berdner
typically based on the size of the isolation relay and is usually higher than the inverter's continuous power rating. Best Regards, John Berdner General Manager, North America 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3201 ext 747

[RE-wrenches] Off-grid e-gauge system

2012-12-27 Thread John McNicholas - Key Power Services
sites - when the batteries run down, the generator runs, how loads affect both; we can get emails and/or text messages to keep track of generator run time (think failure to auto-stop), etc. John McNicholas From: Chris Mason Date: December 27, 2012 4:16:13 PM EST To: RE-wrenches Subject

Re: [RE-wrenches] Magnum MS 4448 AE issues

2012-12-23 Thread John Berdner
flat screen TV (LED) to turn off. We added a soft start circuit and solved the issue. Best Regards, John Berdner General Manager, North America 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3201 ext 747 M: 530.277.4894 -Original Message- Fro

Re: [RE-wrenches] Magnum MS 4448 AE issues

2012-12-23 Thread John Berdner
Amps. Best Regards, John Berdner General Manager, North America 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3201 ext 747 M: 530.277.4894 -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lis

Re: [RE-wrenches] Tying a ground mount to sandstone slab

2012-12-23 Thread John Berdner
l/07246OTSS.pdf or similar. Best Regards, John Berdner General Manager, North America [cid:image001.jpg@01CDE0F4.EF92CDB0] 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3201 ext 747 M: 530.277.4894 From: re-wrenches-boun...@lists.re-wrenches.org [mai

Re: [RE-wrenches] Solaredge AC-coupling

2012-12-19 Thread John Berdner
ence folks that have grid backup systems do not have the same energy awareness as those that live off grid and so they use more power. Best Regards, John Berdner General Manager, North America [cid:image001.jpg@01CDDDC4.BBCAA1C0] 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please no

Re: [RE-wrenches] Wind Turbine sources?

2012-12-12 Thread John Blittersdorf
installed one and it works great. John CV Solar Sent from my iPhone On Dec 12, 2012, at 12:36 AM, "Jeremy Rodriguez- All Solar Inc." wrote: > With news that Southwest Windpower has layed off some of its staff and that > they are discontinuing the Whisper line I wonder who

Re: [RE-wrenches] Trojan 2 volt temp sensor

2012-10-10 Thread John DeBoever
regards, John On Oct 9, 2012, at 17:31, "jay peltz" mailto:j...@asis.com>> wrote: Hi John, A related battery question. Some equipment folks send a stick on battery temp sensor vs the bolt on type. Do you recommend removing the cover and attaching the TS to the actual battery

Re: [RE-wrenches] Trojan 2 volt L-16s

2012-10-09 Thread John DeBoever
Tom, Trojan IND line are 2V single cell batteries, in dual containers. John Travelling On Oct 9, 2012, at 20:05, "Tom Duffy" wrote: > William > > You apparently misunderstood my poorly worded question I am sorry, I meant... > "why can't they make a big 1110

Re: [RE-wrenches] Trojan 2 volt L-16s

2012-10-08 Thread John DeBoever
Bob, Trojan is launching the single-point watering system for the 2v single cells Trojan IND Line. John On Oct 8, 2012, at 18:05, "bob ellison" mailto:reelli...@gmail.com>> wrote: I too like the big single cells. I have used many of the Deka 1360 AH 2 volt cells with good

Re: [RE-wrenches] Trojan 2 volt L-16s

2012-10-08 Thread John DeBoever
46V battery bank configuration with the healthier units. Please consult the controls OEM's for how low the newly configured battery bank voltage can be handled if there is more than one bad unit. I understand the max is 3 units on a 48V bank. To be confirmed. John John F. DeB

Re: [RE-wrenches] Trojan 2 volt L-16s

2012-10-08 Thread John DeBoever
e are true 2V single cells, configured as 2V, or, 4V or 6V bundles in series in a dual-container. These 2V single cells will be perfect to consider for larger Ah battery banks. Sunniest regards, John John F. DeBoever Global Technical & Projects Director - Renewable Energy Trojan B

[RE-wrenches] Fwd: Enphase M210

2012-09-27 Thread John McNicholas - Key Power Services
On the topic of AC modules - has anyone installed the Westinghouse Instant-Connect AC modules that have the inter-module cable connectors built-in to the frames? Feedback? Thanks, John McNicholas NABCEP Certified Solar PV Installer ™ Key Power Services Begin forwarded message: From: Jason

Re: [RE-wrenches] wrenches] Short Circuit Cell Damage

2012-09-18 Thread john
Mark, As far as cutting the jumper for us nightowls, it is easy. Wait until dark. The sun actually turns off every day!. And for the new people on the block, polarity can still be determined after dark. All you need is a microvolt to get polarity. John CV Solar -Original Message

[RE-wrenches] Eco Gen

2012-09-18 Thread john
hours- but running very well) ) on a mouintaintop transmitter I service which may need some help down the road. Any generator related comments appreciated. John Blittersdorf NABCEP Certified Solar PV Installer tm Central Vermont Solar & Wind LLC 104 River Street Rutland, VT 0

Re: [RE-wrenches] Trojan L-16 SG Readings- Did Something Change?

2012-09-04 Thread John DeBoever
s. The specific gravities cannot be used as a reliable source unless we account for the two sources of error mentioned above. I hope the above helps. John John F. DeBoever Global Technical & Projects Director - Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA

Re: [RE-wrenches] Trojan L-16 SG Readings- Did Something Change?

2012-09-04 Thread John DeBoever
?tab=0#TabbedPanels1#top Phone Trojan telephone tech support is available Monday thru Friday, 7am to 5pm Pacific Standard Time. US and Canada: 800.423.6569 ext. 3045 International: +1.562.236.3045 John John F. DeBoever Global Technical & Projects Director - Renewable Energy Trojan Battery Company 1

Re: [RE-wrenches] Trojan L-16 SG Readings- Did Something Change?

2012-08-31 Thread John DeBoever
ative terminal and consist of one letter and one figure. The figure for 2012 is "2". Any date code from and after "E2" (i.e. Code date with letter E2, F2, G2,...) will have a nominal S.G. of 1.280 . Prior that, the nominal S.G. was 1,260. I hope that helps, John John F.

Re: [RE-wrenches] High L16 voltage situation

2012-07-17 Thread John DeBoever
Nathan, Interesting controller situation... I recommend you contact Morningstar tech support center , (215) 321-4457 for support. Ask for Adams. Hope they will clear this out. John John F. DeBoever Global Technical & Projects Director - Renewable Energy Trojan Battery Company 1

Re: [RE-wrenches] High L16 voltage situation

2012-07-17 Thread John DeBoever
e SunSaver Morningstar controller at the site is a 12V or a 24V version? o What is the Vmp of the PV module? John John F. DeBoever Global Technical & Projects Director - Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA 90670 Tel: +1-562-236-3000 Ext. 3139 Cell: +1-845

[RE-wrenches] Fwd: NABCEP Recertification Survey

2012-07-16 Thread John McNicholas - Key Power Services
d he was less than honest with me'.  I would like to see #2 replaced with something more upbeat. 'Were you happy with the installation process and do you feel that the overall experience reflected the efforts of a true professional in this field?'John John McNicholasNABCEP Certifie

Re: [RE-wrenches] Battery Experience

2012-07-13 Thread John DeBoever
. Adequate cycling based on adequate full recharge keep the battery in good health. John John F. DeBoever Global Technical & Projects Director – Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA 90670 Tel: +1-562-236-3000 Ext. 3139 Cell: +1-845-514-7600 – NY office

Re: [RE-wrenches] Battery Experience

2012-07-10 Thread John DeBoever
respective datasheet on our website, see here: ü Trojan Signature L16P: http://www.trojanbatteryre.com/PDF/datasheets/L16P_TrojanRE_Data_Sheets.pdf ü Trojan Signature L16H: http://www.trojanbatteryre.com/PDF/datasheets/L16H_TrojanRE_Data_Sheets.pdf Sunniest regards, John John F. DeBoever Global

Re: [RE-wrenches] Battery Experience

2012-07-09 Thread John DeBoever
/datasheets/L16REA_TrojanRE_Data_Sheets.pdf http://www.trojanbatteryre.com/PDF/datasheets/L16REB_TrojanRE_Data_Sheets.pdf Sunniest regards, John John F. DeBoever Global Technical & Projects Director – Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA 90670 Tel: +1

Re: [RE-wrenches] Battery Experience

2012-07-09 Thread John DeBoever
Dick, Yes, correct, partial state of charge. John On Jul 9, 2012, at 18:45, "Richard L Ratico" wrote: > John, > > Thanks for that clarification. One question: What is PSOC? Partial State Of > Charge? > > Dick Ratico > Solarwind Electric > >

Re: [RE-wrenches] Battery Experience

2012-07-09 Thread John DeBoever
is 1,600 cycles @ 50% DOD and 4,000 cycles @ 20% DOD. Respectively 1,200 cycles # 50% DOD, and, 3,000 cycles @ 20% DOD @ 20% DOD, for the L16-P & L16-H. I hope this helps. Let me know if I can shed further light on other attributes of lead acid batteries. Sunniest regards, John John F. DeBoev

Re: [RE-wrenches] wrenches] Battery Experience

2012-06-30 Thread john
ature failures) but good luck with the standard model. I am currently using Interstate UL 16 and now have 7 years experience with them and so far with good results. John Blittersdorf NABCEP Certified Solar PV Installer tm Central Vermont Solar & Wind LLC 104 River Street Rutland, VT 05701

Re: [RE-wrenches] Hot Trojan Batteries

2012-04-13 Thread John DeBoever
stem design) to stay in good health. FLA batteries need to see equalization when the S.G delta between cells are reaching 30 points difference. Equalization on FLA batteries addresses S.G. unbalance and acid stratification, both of which are challenging the battery health. John Trojan Battery Com

Re: [RE-wrenches] Honda EU3000i pranks

2012-04-10 Thread John Blittersdorf
Jeff, What inverter were you using? I had a VFX accept a freq from a cheap generator that looked like random noise on my scope meter and it could not even read off the same frequency twice in a row. As I recall, I was generally seeing higher harmonic numbers. John Cvsolar Sent from my

Re: [RE-wrenches] Charge Rate (Hot Trojan Batteries)

2012-04-03 Thread John DeBoever
corrosion aggression. I hope this helps, John Trojan Battery Company From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of All Solar, Inc. Sent: Tuesday, April 03, 2012 10:24 AM To: RE-wrenches Subject: Re: [RE-wrenches] Charge Rate (

Re: [RE-wrenches] Hot Trojan Batteries

2012-04-02 Thread John DeBoever
Jason, Wrenches, C/20 means C over 20 hours discharge rate = capacity @ the 20 hours discharge rate. C/20 often is mentioned as C20, so the confusion here. Max recommended is 10& to 15% of C20 of the battery bank. John Trojan Battery Company From: re-wrenches-boun...@lists.re-wrenches

Re: [RE-wrenches] Hot Trojan Batteries

2012-04-02 Thread John DeBoever
this help, John John F. DeBoever Global Technical Director - Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA 90670 Tel: +1-562-236-3000 Ext. 3139 Cell: +1-845-514-7600 - NY office time zone: USA EST (GMT-5) Skype: john.f.deboever Fax: +1-562-236-3239 jdeboe

Re: [RE-wrenches] cycling flooded batteries is not necessary

2012-02-21 Thread John DeBoever
tion, and then make sure the battery is full charged at each cycle. Hope this helps, not confusing you more. There are so many perspectives to see from and one is easy confused… John From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behal

Re: [RE-wrenches] Interstate L-16 vs Trojan L-16REB

2012-02-17 Thread John DeBoever
Correct link for Trojan Premium T-105RE: See here: http://www.trojanbatteryre.com/PDF/datasheets/T105RE_TrojanRE_Data_Sheets.pdf From: John DeBoever Sent: Friday, February 17, 2012 11:50 AM To: RE-wrenches Subject: RE: [RE-wrenches] Interstate L-16 vs Trojan L-16REB Wrenches, Jason, I

Re: [RE-wrenches] Interstate L-16 vs Trojan L-16REB

2012-02-17 Thread John DeBoever
mpany that has good plate weight control and each cells are well balanced through quality control, there should be no big differences within one category. I hope this shed some light on your valid question. John From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists

Re: [RE-wrenches] Quantity of L-16 in a string

2012-02-16 Thread John DeBoever
applications it is recommended to have separate battery banks, each with their own independent charger, then parallel the battery banks and use blocking diodes. John John F. DeBoever Global Technical Director - Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA

Re: [RE-wrenches] Interstate L-16 vs Trojan L-16REB

2012-02-16 Thread John DeBoever
gher total accumulated amp-hours during the life of the Trojan battery. ü Advanced design, multi-rib, rubber-based separator material formulation inhibits antimony transfer between positive grids to the negative plates, as well help with electrolyte flow. John John F. DeBoever Global

Re: [RE-wrenches] Interstate L-16 vs Trojan L-16REB

2012-02-16 Thread John DeBoever
erts and the answers will be "it depends". I would say, understanding the loads and the application is a great step towards long life. Next steps are picking the right battery for the application, sizing, installation and maintenance. John John F. DeBoever Global Technical Dire

Re: [RE-wrenches] Interstate L-16 vs Trojan L-16REB

2012-02-16 Thread John DeBoever
and labeled Deep Cycle that are not, and these will be affected by any amount of cycling, which is giving the Lead Acid industry a not so good name. John From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of toddc...@finestplanet.com

Re: [RE-wrenches] Interstate L-16 vs Trojan L-16REB

2012-02-16 Thread John DeBoever
customers would choose a battery with a longer life and less capacity, over a battery with higher capacity and a shorter life so that the battery bank does not have to be replaced as often. John John F. DeBoever Global Technical Director - Renewable Energy Trojan Battery Company 12380 Clark

Re: [RE-wrenches] wrenches] Interstate L-16 vs Trojan L-16REB

2012-02-15 Thread john
s at no charge. On the question of grid tie, I had a set of 24 Trojan L16's last 12 years with one cycle per month performed by the owner. Off grid, however, around 7 years seems to be the norm. John -Original Message- From: William Miller To: RE-wrenches Sent: Tue, Feb 14, 2012

Re: [RE-wrenches] wrenches] Battery Off Gassing and CO Detectors

2012-02-03 Thread John DeBoever
Very risky proposition... Battery room/enclosure shall be well ventilated. Any fan system shall have a normally open position in case of fan failure, with adequate natural air flow. John From: Kent Osterberg [mailto:k...@coveoregon.com] Sent: Friday, February 03, 2012 01:35 PM To: RE-wrenches

Re: [RE-wrenches] wrenches] Battery Off Gassing and CO Detectors

2012-02-03 Thread john
itely agree with Bob that the CO monitor does work to indicate a bad fan. I have had them go off when the voltage set point on the dux relay was set too high to catch the early stages of gassing. John CVSolar -Original Message- From: Rich Nicol To: 'RE-wrenches' Sent: T

Re: [RE-wrenches] BPS warranty claims

2012-01-16 Thread John DeBoever
From: Marco Mangelsdorf [mailto:ma...@pvthawaii.com] Sent: Sunday, January 15, 2012 07:07 PM To: 'RE-wrenches' Subject: [RE-wrenches] BPS warranty claims My old, usual channels to get warranty coverage from BP Solar appear to have dried up with messages like this. Dear Customer, Customer Se

Re: [RE-wrenches] battery venting; Corrosion

2012-01-06 Thread John DeBoever
poor charge algorithms. Please keep in mind that the above are approximations, as, when lead acid batteries issues are involved, "it depends" is the first words you hear from battery OEM's. Hope this is helps. Good evening, John From: re-wrenches-boun...@lists.re-wrenches.org

Re: [RE-wrenches] battery venting; Corrosion

2012-01-06 Thread John DeBoever
0.33 cc of H2O total gassing per cell) * For constant voltage (float or equalization) the current is a function of temperature and stage of battery life (plus any failure modes that begin to occur toward end-of-life) I'll work up a response after a series of meetings. John Fro

Re: [RE-wrenches] Outback Breaker Problem

2011-12-27 Thread John Mottl
now owns Heinemann who was the original patent holder on the breaker design before patent rights expired in 1998 or so. The Eaton breaker has a near bomb proof handel arrangement. They cost about $10 more but it is a better breaker. John Mottl Rainshadow Solar Inc. PO Box 541 Orcas, WA 98280

Re: [RE-wrenches] wrenches] intermittent battery problem; ...Battery Sulfation

2011-11-13 Thread john
that the other batteries have an elevated voltage. I got rid of the battery, reconfigured to 24v battery bank and eventually changed out my system to new batteries and used the other ones for upgrading my 12v sub system and for spares. The other batteries are still working OK. John

Re: [RE-wrenches] wrenches] Faulty PM-60 circuit board

2011-11-07 Thread john
Joel, I agree with Ray. I did the exact same thing with an MX 60 upgrade and some more modules. Customer was very happy with the improved performance. I had no luck getting a replacement PM-60 and that was several years ago. John Blittersdorf -Original Message- From: Joel

Re: [RE-wrenches] High Voltage MPPT units

2011-11-05 Thread John DeBoever
Todd, It is 2,560 Wp for 24V battery banks and 4,800 Wp for 48V battery banks. John From: toddc...@finestplanet.com [mailto:toddc...@finestplanet.com] Sent: Saturday, November 05, 2011 12:42 AM To: RE-wrenches Subject: Re: [RE-wrenches] High Voltage MPPT units what is the max wattage the unit

Re: [RE-wrenches] High Voltage MPPT units

2011-11-04 Thread John DeBoever
Schneider Electric just launched their MPPT 80-600, which is a 80A , up to 600 V. John Trojan Battery Company - Original Message - From: Carl Emerson [mailto:freepo...@freepower.co.nz] Sent: Friday, November 04, 2011 07:08 PM To: 'RE-wrenches' Subject: [RE-wrenches] High Vo

Re: [RE-wrenches] Voltage Regulator

2011-11-04 Thread John DeBoever
-Input-Single-Output-DC-DC-Converter/SD-200B-Series/default.htm John John F. DeBoever Global Technical Director - Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA 90670 Tel: +1-562-236-3000 Ext. 3139 Fax: +1-562-236-3239 jdeboe...@trojanbattery.com<mailto:jde

Re: [RE-wrenches] battery cycle life, US Battery

2011-09-19 Thread John DeBoever
created by Wrenches fellows for proper positing heavy units John From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Ron Young Sent: Thursday, September 15, 2011 8:11 PM To: RE-wrenches Subject: Re: [RE-wrenches] battery cycle life, US

Re: [RE-wrenches] unique battery bank design question

2011-09-01 Thread John DeBoever
%. Expensive ones have 90-95% efficiencies. John John F. DeBoever Global Projects Director - Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA 90670 Tel: +1-562-236-3000 Ext. 3139 Cell: +1-514-514-7600 - Time Zone: EST USA (GMT-5) Fax: +1-562-236-3239 jdeboe

Re: [RE-wrenches] Lithium Ion Phosphate for grid back up

2011-08-24 Thread John DeBoever
Larry, You are right, the battery bank voltage drives the PWM constant voltage of the controller. The MPPT is a higher frequency DC/DC converter driving the PV module I-V curve to max power point, to which a 300 Hz PWM constant voltage is combined. John From: re-wrenches-boun...@lists.re

Re: [RE-wrenches] Lithium Ion Phosphate for grid back up

2011-08-24 Thread John DeBoever
the PV array, after powering the load, is not wasted and sent into the battery during bulk charge and then tapered in as the voltage raise. Lithium-ion batteries charge mode have certain benefits in some well-defined applications requiring fast charge with the requirement of a BMS. John From

Re: [RE-wrenches] Trojan RE Series Tech question

2011-08-03 Thread John DeBoever
df/manuals/flexmax.pdf John John F. DeBoever Global Projects Director - Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA 90670 Tel: +1-562-236-3000 Ext. 3139 Cell: +1-514-514-7600 - Time Zone: EST USA (GMT-5) Fax: +1-562-236-3239 jdeboe...@trojanbattery.com<

Re: [RE-wrenches] Trojan RE Series Tech question

2011-08-03 Thread John DeBoever
adjust the time. John John F. DeBoever Global Projects Director - Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA 90670 Tel: +1-562-236-3000 Ext. 3139 Cell: +1-514-514-7600 - Time Zone: EST USA (GMT-5) Fax: +1-562-236-3239 jdeboe...@trojanbattery.com<

Re: [RE-wrenches] Trojan RE Series Tech question

2011-08-03 Thread John DeBoever
Hello David, I thought I would share with the Wrenches the below answer from our Tech Support. Rgds, John From: Tom Lowder Sent: Wednesday, August 03, 2011 10:17 AM To: d...@independentpowerllc.com Cc: John DeBoever; Dean Middleton; Stacey Delzeit Subject: Questions on RE product Dave, Hi

Re: [RE-wrenches] Trojan RE Series Tech question

2011-08-02 Thread John DeBoever
support is available Monday thru Friday, 7am to 5pm Pacific Standard Time. US and Canada: 800-423-6569 International: +1-562-236-3000 Your email arrived at 2:30 PM PST to Ronald old address and has been re-directed. Please look for a response by tomorrow. Regards, John From: re-wrenches-boun

Re: [RE-wrenches] wrenches] Fwd: out of business

2011-05-17 Thread john
Ray, We were already doomed when the Tesla generator came out... The plans to build are now down to $39 with all parts costing under $100 to "run your whole house" John Blittersdorf -Original Message- From: Ray Walters To: RE-wrenches Sent: Tue, May 17, 2011 8:29

[RE-wrenches] REC Modules

2011-05-11 Thread john
stopped liking the looks of the Solarex MSX series. I still look out my kitchen window at the 10 MSX 60's (1996) on one of my racks. John Blittersdorf Central Vermont Solar & Wind ___ List sponsored by Home Power magazine List Ad

[RE-wrenches] Fwd: Hydrometer source

2011-05-09 Thread John McNicholas - Key Power Services
We have been using a digital unit for a few years - Sper Scientific 300055 Pocket Digital Refractometer - expensive ($300+), but it appears to be very accurate. has built-in temperature compensation. John McNicholas NABCEP Certified Solar PV Installer ™ Key Power Services, Inc. Begin

Re: [RE-wrenches] wrenches] PV powered music festival

2011-04-30 Thread john
all of you with the disasters we encountered on the way to our beautiful, perfectly functioning power system. I will be providing the story on the SolarFest website in our power section (when I find the time to write it). For some photos of our system, check out www.SolarFest.org. John Blitt

Re: [RE-wrenches] wrenches] web sites for products

2011-04-20 Thread john
times covered with snow over the meter. Meter works great. Meter was mounted at SolarFest last year with no outside special sealing and has survived my abuse. John CVSolar -Original Message- From: Dan Fink To: RE-wrenches Sent: Tue, Apr 19, 2011 8:25 pm Subject: Re: [RE-wrenches

Re: [RE-wrenches] wrenches] Value of PV system to a home

2011-03-23 Thread john
it because they wanted solar and liked the idea of not having to go to all the trouble to get it installed. One mortgage payment... all done. John Blittersdorf Central Vermont Solar & Wind LLC 104 River Street Rutland, VT 05701 -Original Message- From: Solar Energy Solutions To

Re: [RE-wrenches] wrenches] Generators?

2011-03-16 Thread john
Ray, I solved the problem of the small inverter/generators kicking out by just making the generator and an IOTA charger as a subsystem.. I find the best charger match for the small generator and hook up to the batteries. I started doing this with grid tie with backup systems as the GVFX i

Re: [RE-wrenches] RE-wrenches Digest, Vol 4, Issue 85

2011-03-11 Thread John Wadley
pon delivery. John Wadley -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org]On Behalf Of Jason Szumlanski Sent: Thursday, March 10, 2011 12:43 PM To: RE-wrenches Subject: [RE-wrenches] Damaged Modules (Hidden on Pallets)

Re: [RE-wrenches] One renewable disconnect.

2011-03-02 Thread John Wadley
ou and Jeff for taking time to offer suggestions. Best Regards, John Wadley From: Darryl Thayer daryl_solar at yahoo.com To: RE-wrenches Sent: Wed Mar 2 15:59:20 PST 2011 Subject: [RE-wrenches] One renewable disconnect. I hope i do not muddy the water here. if y

Re: [RE-wrenches] One renewable disconnect.

2011-03-02 Thread John Wadley
electrically connected (at least on one phase) immediately afterward via the line-side tap. Anyone know of other restrictions that I am missing? Best Regards, John Wadley, MSEE, PE NABCEP Certified Solar PV Installer (TM) Wadley Engineering 214-557-3841 CONFIDENTIALITY: This communication, including

[RE-wrenches] One renewable disconnect.

2011-03-02 Thread John Wadley
hat is the best practice in this situation? Thanks, John Wadley, MSEE, PE NABCEP Certified Solar PV Installer (TM) Wadley Engineering 214-557-3841 CONFIDENTIALITY: This communication, including attachments, is for the exclusive use of the addressee(s) and may contain proprietary, confidential or

[RE-wrenches] FX inverter shutting itself off

2011-02-06 Thread john
ng regular long outages. We have to trailer a snowmobile to the mountain almost an hour away and go to the top to push the ON button. Also, any comments on other data systems which could turn the inverter on remotely. John Blittersdorf Central Vermo

Re: [RE-wrenches] Cable Sizing - revisited, Ambient Temp

2011-01-27 Thread John Wadley
Temperature ) to protect myself and the end customer. Otherwise, I'll have to force them to show conduit runs on a site layout drawing and say any change from that has to be approved through me. Best Regards, John Wadley, PE NABCEP Certified Solar PV Installer (TM) Wadley Engineering > Date

Re: [RE-wrenches] Cable Sizing - revisited, Ambient Temp

2011-01-26 Thread John Wadley
I start "what-if'ing" whether my design numbers will be conservative enough to prevent a system failure or a fire. Thanks and regards, John Wadley, PE NABCEP Certified Solar PV Installer (TM) Wadley Engineering > Date: Tue, 25 Jan 2011 15:37:20 -0500 > From: Dave Click > To:

[RE-wrenches] Cable Sizing - revisited, Ambient Temp

2011-01-21 Thread John Wadley
y where conduit might run and use the temp delta as an adder (like Table 310.15 (B) 2 (c)) to the ASHREA 2% high temp to arrive at a new, situational ambient temp before applying the other factors cited? Thanks in advance, John Wadley, PE Wadley Engineering NABCEP Certified Solar PV Installer

[RE-wrenches] Water pumping query....

2010-09-28 Thread John Veix
do is utilize the existing float switch for both pumps rather than them adding another float switch and 80M of extra cable just for the dc pump. Can anyone see an easy way to achieve this without adding too much extra expense? thanks for any collective wisdom - John

[RE-wrenches] Plug-in solar

2010-08-22 Thread John McNicholas - Key Power Services
Coming to a hardware store near you. http://www.cnn.com/2010/TECH/innovation/08/17/plug.in.solar.energy/index.html?hpt=C2 John McNicholas NABCEP Certified Solar PV Installer ™ Key Power Services, Inc. ___ List sponsored by Home Power magazine

<    1   2   3   4   >