f the SMM's which adds additional justification
> to perhaps try it out again. If you've used the SMM's for this purpose have
> you used the 50 as well as the 100 amp version?
>
> Thanks for the input, Nick
>
> On Thu, Jun 20, 2024 at 4:28 AM Mac Lewis via RE-wrenches <
> re-
/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.or
Hi Jason,
This pairing should work fine. There is an open loop setting for the
Homegrid and the flexnet can work pretty well keeping track of SOC.
I'd stick with the Outback at least initially.
The 15 cell Homegrid is lower voltage so it can work with older equipment
with 48V lbco limit easily.
archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
controller would bring the excess PV online?
It seems cheaper and better to use the grid voltage to perform this logic
to me but I may be missing something.
Thanks for your input
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List
Hello Wrenches,
I am looking closely at offering the Fortress Avalon system. I would like
to hear from anyone that has installed, commissioned and seen them work in
the field. Pros and cons, all of your thoughts are appreciated.
Thanks!
___
List
> e-mail offgridso...@sti.net
> text 209 813 0060*
>
>
> On 2024-05-03 6:54 am, Mac Lewis via RE-wrenches wrote:
>
> Hello Wrenches,
>
> I have a system that suddenly started seeing quite a few SOC drops and
> blips, causing generator starts.
>
> Here is an
/solved this issue.
Much appreciated.
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.o
p; etiquette:
>>>> http://www.re-wrenches.org/etiquette.htm
>>>>
>>>> Check out or update participant bios:
>>>> http://www.members.re-wrenches.org
>>>>
>>>> _______
>>> List
at a head of 20'. My
preference is no batteries but we could design in batteries.
Any input is appreciated!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wr
Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for search
, informed advice. Any help would be greatly appreciated.
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenche
Hi Howie,
I would ask the AHJ and indicate you are simply reinstalling the system,
not reengineering anything.
I wouldn't take it for granted that the mounting hardware will be usable,
or cost effective to reuse. It's often seized, cross threaded, dirty etc.
There will be a lot of these coming
List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail
Hello Wrenches,
Is there a mounting height limit for Enphase batteries that you are aware
of? I don't see one from Enphase, just clearance requirements but Im
wondering if there is a code about this.
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada."
re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-w
of arc-fault monitoring.
Does anyone have any documentation for the MPPT Disconnect RS that doesn't
specifically call out (only) NEC 2017 compliant?
Or if this is not a good approach and is not reliable, I would appreciate
your input as well.
Cheers!
--
Mac Lewis
*"Yo solo sé que
Hello Wrenches,
Can anyone recommend a reliable diesel generator that starts well in the
10-20kW range?
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here:
Have you checked those little pop out breakers up near the wiring
compartment?
Have you tried "force bulk"?
On Tue, Oct 31, 2023, 10:56 AM Dan Fink via RE-wrenches <
re-wrenches@lists.re-wrenches.org> wrote:
> I have had issues before with Magnum inverter/chargers not accepting AC
> input
hes@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
--
Mac Lewis
*"Y
I had a similar issue once with a Sol-Ark 12k, triple stack. The issue
ended up being that the phase relationship got reversed during the
installation. AC out and AC in need to be carefully phased out. I don't
really understand why, but it's an easy thing to check.
Let us know what you find.
Hi Amos,
What input mode are you using?
Try switching to "support" mode and see if the charging current increases.
On Wed, Oct 25, 2023, 1:24 PM Amos Post via RE-wrenches <
re-wrenches@lists.re-wrenches.org> wrote:
> Hello wrenches,
>
> We just installed an GS8048a Radian build with Mate 3SL
one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out
here are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-w
ttp://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
--
Mac Lewis
*"Yo solo sé que no sé nada
to avoid or do these require positive ground to
avoid the PID?
I appreciate any input, suggestions that you may have.
Cheers!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member
/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules &a
org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules
wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
--
Mac Lewis
*"Yo solo sé que no sé nada." -Só
module won't allow me to drop the start
trigger below 40%. I am wondering if a firmware update will open that
range or if I need to replace the AGS. Any suggestions for me? I'll
update all firmware but if I can save a trip, that would be great.
Thanks!
--
Mac Lewis
*"Yo solo sé que
ail I think:
>
> Mac,
>
>
> I think you've got an elegant solution to the problem. All you need is an
> inexpensive relay and to program the Aux output for loadshed. I believe
> shutting down the inverter with the remote on/off contacts is actually
> less stressful on the inver
Hello Wrenches,
Is there any tap devices (piercing or other) that are UL Listed for tapping
on the utility side of a main breaker for a solar interconnection? Our
AHJ won't allow anything that isn't service rated.
Thanks in advance!
--
Mac Lewis
*"Yo solo sé que no sé nada."
effects of doing this with substantial load on the system.
Of course, I can use a power relay but this may be better.
Thanks for your input!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pa
work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
>
solutions out there for
this.
Thanks in advance!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wr
Mick,
I'll vouch that the Victron solution works great. You need a GSM carrier,
TMobile works as well as others, AT for one. The GSM piece is important,
Verizon won't work with this.
Another approach is to do a Mifi box with Verizon, then just use it as a
wireless hotspot like any WiFi network.
wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-ar
Hello Wrenches,
Now that Schneider has phased out SCP, what are the options for a GUI
onsite for non-savvy consumers?
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional m
/challenges trying to get closed loop
communications to work with this set up. If not, how about schneiders
battery monitor with Lithium?
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pa
tp://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
ville |
> Indianapolis
>
> 513-448-5176 (mobile)
>
> 877-312-7456 (Main Office)
>
> da...@sesre.com
>
>
>
> *From:* RE-wrenches *On
> Behalf Of *Mac Lewis via RE-wrenches
> *Sent:* Sunday, February 26, 2023 10:54 AM
> *To:* RE-wrenches
> *Cc
to the storage inverter.
I'd love to find a packaged UL listed combiner for this, but I've had no
luck with that. Any suggestions/supplier contacts are appreciated
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List
;
> CA Lic. 773985
>
>
>
>
>
> *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On
> Behalf Of *Mac Lewis via RE-wrenches
> *Sent:* Thursday, February 23, 2023 9:56 AM
> *To:* RE-wrenches
> *Cc:* Mac Lewis
> *Subject:* [RE-wrenches] Enphase
sure I can fab up
something, but curious if anyone has dealt with this? Or has a good
contact at enphase that might be able to help with this unusual request.
Thanks in advance!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
__
; http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrench
Hello,
Are there any wrenches out there that service Woodland Park CO? Please
contact me off list.
Thanks
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
dress & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.
Hi Jay,
Not sure about the Mate3s but I just got shipping notification for Fm100s
from two different vendors. I had given up on them but I think they are out
there now.
Cheers
On Tue, Jan 17, 2023, 2:43 PM William Miller via RE-wrenches <
re-wrenches@lists.re-wrenches.org> wrote:
> Scott:
>
>
wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
--
Mac Lewis
*"Yo solo
;> I would consider what web based monitoring system he wants and go with
>>> that platform.
>>>
>>> Regardless of system I'd install soft start/vfd on the larger units.
>>> Just easier on everything.
>>>
>>> The solark 12 doesn't seem to be good f
gt; Larry Crutcher
> Starlight Solar Power Systems
>
>
>
> On Jan 13, 2023, at 11:33 AM, Mac Lewis via RE-wrenches <
> re-wrenches@lists.re-wrenches.org> wrote:
>
> Hello Wrenches,
>
> I have a new client that has ran a pretty decent wood shop for about 10
> ye
.
Is it as simple as saying if the Magnum can start this load, the Radian
should?
I appreciate your input!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wr
enches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@li
Hi Kris,
When the BMS suddenly blocks charge, the voltage will spike up if the
charger can't respond quickly enough.
You may try to decrease charge voltage slightly. This same affect can cook
an alternator in a vehicle as well. Higher end BMS systems can shunt
current to mediate this.
Good
Hello Wrenches,
Does anyone know a good contact for Sonnen customer support? I've tried
online, calling etc with no response after many attempts. Not impressed!
Thanks in advance
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
__
seen anything like this? Same parameters were lost from first data
loss to following data loss. Kind of strange. I haven't visited the site
so I may not b getting the full picture.
Thanks
--
Mac Lewis
*"Yo solo sé que no sé nada."
closely at the MNPV6-250 DISCO but again, the 300Vdc breakers that
come with this are listed to DC branch circuit protection (UL 489A, IEC /
EN 60947-2) not necessarily calling out PV specifically.
Any input is appreciated!
Thanks
--
Mac Lewis
*"Yo solo sé que no sé nada."
___
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/r
tiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Al
of things? Do I need
to increase battery voltage design?
I have gotten a custom busbar fabricated by Storm Power rated for about 2kA
before, but I'd love to have a UL Listed solution for large battery
combining. Any suggestions are appreciated.
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé
Hello Wrenches,
What inverter options are there for 3 phase, UL listed, off-grid inverter
systems in the 30kW+ category?
It's been quite a while since I dove into this...
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
__
Hi Howie,
I haven't done a Fortress paired with a Sunny Island, but I have done a
large Blue Ion battery bank work a quad stack of Sunny Islands. You can
use the Namaka box to aggregate battery bank data and select "external
Li-ion BMS" and it will convey state of charge to the Sunny Island.
Hi Scott,
I asked Sol-Ark about this a while ago. The Sol-Ark cannot handle the
increase in current on the pins of the CT input (even though it's quite
small). However, my info could be out-dated.
Maybe you could source a CT with 1/2 the output ratio and make it work?
Let us know if you find a
t;
> On Jul 25, 2022, at 11:08 PM, Mac Lewis via RE-wrenches <
> re-wrenches@lists.re-wrenches.org> wrote:
>
> I don't know your specific circumstance but the cellular modem option
> works really well for monitoring only. There are also many point to point
> networking systems
I don't know your specific circumstance but the cellular modem option works
really well for monitoring only. There are also many point to point
networking systems that are solid and fairly easy to set up if you can do
line of sight.
Thanks!
On Mon, Jul 25, 2022, 1:29 PM Nick Soleil via
> ___
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.or
Hello Wrenches,
Does anyone have a recommendation for a small, industrial propane
generator? Something rated for prime power with reliable starting. I need
it in the 12-20kW range. Hard to find them this small.
Thanks in advance
--
Mac Lewis
*"Yo solo sé que no sé nada."
?
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address
se systems performing in the field?
Thanks as always!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-
cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquett
t;>
>> I’ve just never seen this failure mode before.
>>
>> Jay
>>
>>
>>
>> On Feb 24, 2022, at 8:48 PM, Mac Lewis wrote:
>>
>>
>> Hi Jay,
>>
>> Have you ruled out a problem with the float switch/wiring?
>>
>>
ww.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participan
> <http://entech-engineering.com>
>
>
> ___
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email
ddress: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-a
ists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/
Yes, this is a loose connection coupled with no way to detect and respond
to the Arc fault. It doesn't have to be loose on that conductor on a
common bus, any bad connection can build up heat and melt conductors.
Scary!
On Mon, Jan 31, 2022, 6:51 PM Dave Tedeyan wrote:
> Hi All,
>
> I was
Hi Aaron,
You can do DC to DC buck converters, but I would suggest cheap and
efficient 24V, AC power supplies. It's easy to have some spares around and
they can be very reliable.
On Wed, Jan 26, 2022, 5:16 PM Aaron Mandelkorn wrote:
> Wrenches,
>
> I have a customer with a very old 24v off
't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
>
g to see some more Classic failures as well however most of
> them are much older than the Outbacks and Midnite’s RMA process takes less
> than 1/4 of the time it takes to deal with Outback (though they are getting
> better it seems).
>
> Best of luck with the effort Mac! Nick
>
? I am trying to avoid a long snowcat ride!
Thanks
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wr
I think this is it:
AD1212HB-A71GL, from Adda corporation
On Tue, Jan 11, 2022, 12:35 PM Dave Tedeyan wrote:
> Hi all,
>
> Does anyone have a source where you can get a replacement fan for the
> Conext XW+ inverters? I just talked to Schneider and since this inverter is
> just out of warranty,
on the Mate3s is up to date.
Any ideas?
Thanks in advance
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenche
be going on? Anything that I can do that may not require replacement?
Very tough communicating to SMA while on site and of course, this always
happens on Friday night.
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List
Christopher Warfel
> ENTECH Engineering, Inc.
> PO Box 871, Block Island, RI 02807
> 401-466-8978
> <http://entech-engineering.com>
>
>
> ___
re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sóc
Hi Jerry,
We are located in Western Colorado, Eastern Utah.
Thanks
On Wed, Dec 29, 2021, 3:22 PM Jerry Shafer wrote:
> Where are you located
> Jerry
>
> On Tue, Dec 28, 2021, 3:31 PM Mac Lewis wrote:
>
>> Hello Wrenches,
>>
>> Can anyone recommend
>
> Idaho Contractor - # 028765 Idaho PV # 028374
>
> NABCEP # 051112-136 www.greatsolarworks.com
>
> *"Responsible Technologies for Responsible People since 1988" *
>
> *P* Please consider the environment before printing this email.
>
>
>
>
>
&g
Hello Wrenches,
Can anyone recommend a ballasted ground mount solution that is offered on a
residential scale? Below 10kW typically.
Thanks in advance!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwoo
>
> *Celebrating our 31st Anniversary 1991-2022!!*
>
> *www.vermont.solar*
> <https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb435%7C1%7C0%7C636842843233477645=0NjyuKeQbEK6245SNnk8
that are effective at
keeping this from happening? All connections are good and tight and triple
checked. Anyway to remotely clear these faults?
Thanks
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood All
I think it's an Eaton Cat. No. M22-ES-MS1
On Tue, Dec 14, 2021, 8:23 PM AE Solar wrote:
> I thought someone at SMA told me once that it was a generic key made by
> Eaton(?) and could be picked up from any distributor?
>
> Adam Katzman
> Autonomous Energies
> PO Box 1245
> Kingston, NY 12402
>
.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
--
Mac Lewis
*"Yo solo s
gt;
> https://wildcatpowergen.com/pages/maverick
>
> Michael D Nelson
> MD Electric & Solar, Inc.
> 707-684-0064 mobile
> 707-884-1862 office
> www.mdelectricsolar.com
> www.facebook.com/mdelectricandsolar
>
>
> On Dec 2, 2021, at 6:27 AM, Mac Lewis wrote:
>
>
nches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> h
Hello Wrenches,
Is there a buck converter out there that will take a fluctuating input
voltage of ~160V down to about 24V? I need about 200-300W
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwoo
Hi Wrenches,
Does anyone know if it's possible to over current an grundfos sq flex pump?
It looks like it has a current limit of 10A but if more than 10A is
available won't it just maximize pump speed?
Thanks
___
List sponsored by Redwood Alliance
Pay
Hey Wrenches,
Does anyone know where to get the latest firmware for the Sunny Webbox?
The product is long gone but we are trying to enable Modbus for
communication with the Namaka box (blue Ion).
Thanks in advance!
--
Mac Lewis
*"Yo solo sé que no sé nada."
Hi Allan,
I suggest finding a local long-standing generator technician and see if
they can help provide the generator. We see so many generators bought
online with no way to get service because there are no local and qualified
service technicians to service that brand. If you buy from a local
or tile
replacement or other? Any advantages to specific brands?
Thanks!
--
Mac Lewis
*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: R
ons.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules &a
1 - 100 of 433 matches
Mail list logo
