On Sat, 2003-03-08 at 03:34, Jim Hayward wrote:
> The settings you are changing have no effect on GTK 1.x apps. Which
> Evolution is. You need to edit ~/.gnome/Gnome
>
> http-show=galeon "%s"
> https-show=galeon "%s"
Thank you, that did the trick.
--
redhat-list mailing list
unsubscribe mailt
> My email address has in fact changed. However there seems to be no way
> on the Red Hat site to make this change.
>
> While I have written to [EMAIL PROTECTED] in this regard, I wonder
> if anyone else has experienced and solved this sort of thing.
>
> TIA
>
> John
Yes, I got it on both my acco
On Sun, 2003-03-09 at 11:52, Gehring, Andrew x66132 wrote:
> Hello,
>
>
> Anyone know how to force a ethernet (Dell System) interface on RH8 to Full
> 100?
>
> Thanks,
> Andrew
You should be able to make modifications to the /etc/modules.conf where
you will find the mention of:
alias eth0 your
Hello,
Anyone know how to force a ethernet (Dell System) interface on RH8 to Full
100?
Thanks,
Andrew
<>
On 20:31 08 Mar 2003, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
| On Sat, 8 Mar 2003 [EMAIL PROTECTED] wrote:
| > On Fri, 7 Mar 2003, Steve Lee wrote:
| > > In SecureCRT, (windows people) can send a packet every so many
| > > hours, to keep it alive, anyone with any ideas on doing this
| > > is
Just got the following note from RedHat Network while trying to run
up2date:
Error Message:
Your demo account has been disabled. To enable your account, you
must
verify your email address by visiting:
https://rhn.redhat.com/network/account/change-email.pxt
You may also enable
On 9 Mar 2003, Kleiner Hampel wrote:
> I want to deactivate the usb mouse module which is loaded automatically
> at startup. Where can i do this?
There might be a line in your /etc/modules.conf you can comment out, or do
a "lsmod | grep -i usb" and do a "rmmod" on the offending module, if you
dont
> I have ATI radeon 9500 128 Mb DDR, configured as a VESA driver (generic)
> in RH 8.0. Can I configure it out to watch dvd or whatever else on TV?
> How can i do?
More then likely you'll need the Linux driver for accellerated DVD viewing.
Regards,
---
Edward Dekkers (Director)
Triple D Comput
On Sat, 8 Mar 2003 [EMAIL PROTECTED] wrote:
> On Fri, 7 Mar 2003, Steve Lee wrote:
> > In SecureCRT, (windows people) can send a packet every so many
> > hours, to keep it alive, anyone with any ideas on doing this
> > is Xwindows ?
> >
> > Thanks
>
> while /bin/true;do ping -c 1 REMOTEHOST_IP >/de
On Fri, 7 Mar 2003, Steve Lee wrote:
> Does anyone have a solution to haveing a xterm timing out
> when connected remotely to a system? i would like my terminal
> to stay connected, but i guess our VPN to our colo is timing out
> and disconnecting all my connections.
>
> In SecureCRT, (windows peo
On Fri, 7 Mar 2003, Stephen Corey wrote:
> I'm going to be running 2 satellite links with RH 7.3 on them. For the
> best performance, I'm told that you use the (bandwidth*latency) product
> as the values for tcp_rmem and tcpwmem values in the /proc/sys/net/ipv4/
> directory. Do you use the bandwid
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 08 March 2003 07:18 pm, KC wrote:
> there is no directory there though..
>
> when I "ls /usr/src"
> the 2.4. is in green
It would really help if you pasted the output of the commands into your
reply. Seeing the output of 'ls -l /usr/s
Anyone out there a wireless networking guru? I need help. :)
I just got a refurb dell laptop and I installed RH 7.3 on it. I am trying
to get a SMC Wireless PCMCIA card installed on it, but I can't get the
instructions SMC sent me to work right. According to the instructions, a
module is suppos
Hi All,
I am running Linux Terminal Server (www.ltsp.org) v3 on RH8. One of my terminals is a
Packard Bell P133 with the built in Cirrus chip set. It is using a 3Com 3C590 NIC. It
boots fine but when I get to the X session it appears as 2 images on the monitor, one
overlapped over the other but
Howdy All,
This is a follow up of my earlier post regarding my laptop and
firewire problems.
RedHat 8.0 detects and attempts to initialize my cd-rw. There's a
long pause while it detects, and several "bus reset" error messages for the
IEEE1394 bus. The first time I attempt to moun
Hello,
i have compiled emu10k1 in section 'sound' as module.
After 'insmod emu10lk1' i get this:
/lib/modules/2.4.20/kernel/drivers/sound/emu10k1/emu10k1.o: init_module:
No such device
Which device is missing and why?
/dev/audio exists..
many thanks for help
hampel
--
redhat-list mailing
there is no directory there though..
when I "ls /usr/src"
the 2.4. is in green
- Original Message -
From: "Michael Fratoni" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, March 08, 2003 4:19 PM
Subject: Re: Linux Source directory
> -BEGIN PGP SIGNED MESSAGE-
> H
Hello!
I want to deactivate the usb mouse module which is loaded automatically
at startup. Where can i do this?
regards,
hampel
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
The off the shelf software (close source/retail/etc) doesn't have near the
level of documentation that linux firewall has. If you Google: 'linux
firewall', there are about 188,000 results. There are at least eight (8)
real good examples of heavy duty firewall implemented on linux. Search the
arc
Think it depends on the application. Linux firewalls afford you much
flexibility, that I do agree with (though I wouldn't throw a proxy into
the mix as a fw feature. You could easily run a proxy with even an
appliance). Firewall appliances, and/or NAT routers offer decent
firewalling for the home u
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 08 March 2003 11:30 am, Bret Hughes wrote:
> On Sat, 2003-03-08 at 04:38, Michael Fratoni wrote:
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > On Friday 07 March 2003 11:51 pm, Bret Hughes wrote:
> > > On Fri, 2003-03-07 at
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 08 March 2003 05:17 pm, KC wrote:
> Thanks alot :) it is installed (it just gave me kernel-source back so I
> assume it is)..
> but where is the source directory now, which is what i needed in the
> first place.
> and yes the symlink appear
I checked under /etc/serivces and the ports 33434 and
33490 are not commented out, but I am not familiar
with iptables.
I have stopped iptables from booting up when the
machine stops but how can I turn it all of the way
off?
thanks
-Chris
>Traceroute from linux goes on udp ports unlike
trac
Hello all,
Can anyone tell me why their is no sound in the Mahjongg game that came with RH8.0 and yet their is plenty of different sounds with the Mahjongg game that came with RH7.2. I think I am having a sound problem.
Also Gnome won't play the login wav either. That why I think I have a sou
Thanks alot :) it is installed (it just gave me kernel-source back so I
assume it is)..
but where is the source directory now, which is what i needed in the first
place.
and yes the symlink appears correct.
KC
- Original Message -
From: "Michael Fratoni" <[EMAIL PROTECTED]>
To: <[EMAIL PR
Thanks Cameron, Ramesh, & Steve. I ended up putting in in a script.
Mike
On Saturday 08 March 2003 05:10, Cameron Simpson wrote:
> On 03:18 08 Mar 2003, M.Lewis <[EMAIL PROTECTED]> wrote:
> | > Percents are special in Vixie cron crontabs. You need to slosh it:
> | >
> | > /bin/tar czvf /root/db
Hello Michael!
It really does seem like gcc 3.2 bug because I installed gcc 3.2.2 from
rawhide and everything works perfectly. I have Athlon 2000XP and if I'm
not mistaking, other people who had problems with gcc 3.2 also use
Athlon.
Anyway, this is not a problem for me anymore. For completenes
At 01:22 PM 01/03/2003, you wrote:
I recently installed Redhat on an old P2 laptop. It works like a champ and i
am extremely pleased. However the laptop only comes with 2.5 GB of hard drive
space. Using the system over the last couple of weeks has the drive at 60% of
its capacity. Thats making me a
Poptop pptp works well too.
-Original Message-
From: Chris Watt [mailto:[EMAIL PROTECTED]
Sent: Saturday, March 08, 2003 4:06 PM
To: [EMAIL PROTECTED]
Cc: Steve Howard
Subject: Re: Microsoft to Redhat 8 VPN
At 11:55 AM 19/02/2003, you wrote:
>Does anyone know of the best source of infor
as wondering if anyones had experience in installing a Linksys wireless-G
router/wireless access point along with RH8?
I am looking at networking my new RH8 machine with a second PC running same
and wondered what I'm getting myself into. See the usual disclaimers on the
manufacturers web site.
Any
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 08 March 2003 10:46 am, KC wrote:
> Yes, there are, the wavelan and pcmcia drivers (i was told) aren't
> supported by Turbocell protocoll which is what I need to have.
Good enough for me, just wanted to make sure you actually needed to
re
At 11:55 AM 19/02/2003, you wrote:
Does anyone know of the best source of information on setting up a VPN
with Redhat 8 that windows road warriors can use? I would like to CIPE
since it comes with RH8 but will use other if I can find a good explanation.
Not only doe CIPE work quite well, it's als
At 12:59 AM 13/02/2003, you wrote:
But now, there are many vendors come with pre-built firewall that I only
have to configure it in 15 minutes (that what they say), and it works.
What are the different if I using RHL 8 as firewall, rather than using
pre-built firewall. They say that the pre-built
These are the upd ports for traceroute (from linux)
33434:33490
- Original Message -
From: "Mihai Tanasescu" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, March 08, 2003 10:55 PM
Subject: Re: traceroute
> Traceroute from linux goes on udp ports unlike tracert from windows (I
Traceroute from linux goes on udp ports unlike tracert from windows (I
think this one from windows uses icmp)
Maybe you have those udp ports blocked from your firewall.
- Original Message -
From: "CM Miller" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, March 08, 2003 9:13 PM
Hi all,
I am trying to set up two RH8 systems. Lets call the server jack and the
client jill. I am trying to set up Pine 4.53 so I can read my mail from
either Jack or Jill. BTW, I have read the tech-notes.txt file included
with Pine.
Jack has/is ...
the /home directory
the NIS server
rs
** Reply to message from CM Miller <[EMAIL PROTECTED]> on Sat, 08 Mar 2003 11:13:40
-0800 (PST)
> Yes the computer is connected to a network, which is
> mine, and I do have a linksys router/firewall, but I
> can do tracert from my windows box ok, but not from
> Linux.
Apples and oranges. Most i
I followed dbrett's suggestion and grepped dmesg to find out which USB
ports were active. My mouse was plugged in to USB port 2, but port 1
was free. Then I had to chmod ttyUSB1 and make /dev/pilot a symlink to
/dev/ttyUSB1, then manually start gpilotd. Once all that was done, it
worked like a c
You have to be sure you're using the right port. You can fool JPilot too
by simple creating a symlink to the USB device and calling it
/dev/pilot. Also, I found that I occassionally have to soft-reset my
Clie' to get it to sync.
<>
On Sat, 2003-03-08 at 14:53, dbrett wrote:
> If you get this wor
At 11:12 AM 07/02/2003, you wrote:
I know copy or move the data right!? Well the real problem is that I
have my root, boot and grub boot on the multi-disk. I am hoping there is
a tried and true way to move the current build to the new disk.
The new disk is already in the box and mounted at boot.
First, see if you have Galeon already:
rpm -q galeon
If not:
up2date-nox -i galeon
<>
On Sat, 2003-03-08 at 14:52, Jim Vellenga wrote:
> Hi All,
>
> I have been following the whole Galeon discussion with great interest. It
> looked interesting, so I thought I would install it. I have the
On Sun, 2003-03-09 at 06:52, Jim Vellenga wrote:
> Hi All,
>
> I have been following the whole Galeon discussion with great interest. It
> looked interesting, so I thought I would install it. I have the latest
> version of Mozilla installed, so I need the latest version of Galeon. As
> far a
Hi All,
I have been following the whole Galeon discussion with great interest. It
looked interesting, so I thought I would install it. I have the latest
version of Mozilla installed, so I need the latest version of Galeon. As
far as I can tell it is only available as a tar/gz source. So I d
If you get this working let me know. I am in exactly the same boat as you.
Things I know and suspect are the following:
- if you look in the messages log you will see reference to the port when
you connect to usb cradle. I tried setting the port to these and it still
did not work.
- I suspect,
Francesco Amelio,
On Saturday March 08, 2003 06:00, Francesco Amelio wrote:
> Php Version: PHP 4.2.2
> Apache Version: Apache 2.0.40
>
> How can i disable php engine to certain virtualhost or directory?
>
> I've put "php_flag engine off" "php_value engine off" "php_value engine 0"
> but it doesn't
At 08:33 AM 07/02/2003, you wrote:
I've got a SCSI CDRW (Yamaha CRW 4416) and I have been unable to get it to
work with any version of RedHat since the kernel that came with RedHat 7.1.
I'm now on RedHat 8.0. It just gives me a "device unavailable" error when I
try to actually burn something. Yeste
Hi folks,
I recently bought a computer with a RocketRAID133 HPT372A adapter
installed. I successfully set up 2 mirrored disk arrays and installed
Windows on one mirrored drive following the mfgr's instructions. I have
attempted to install RedHat Linux on the other mirrored drive using the
mfgr
Thanks for replying. Unfortunately, alt-tab does not seem to be working.
On the 'K menu' I don't have settings, but did have preferences - look and
fell - windows behaviour. The advance tab there has no setting for key
combinations I could see.
If it makes a difference I am running stock rh7.3
Yes the computer is connected to a network, which is
mine, and I do have a linksys router/firewall, but I
can do tracert from my windows box ok, but not from
Linux.
Even simple command like root
traceroute olug.org
still get
1 * * *
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *
?
thanks
On Sat, Mar 08, 2003 at 05:36:53PM +0100, Bart SCHELSTRAETE wrote:
> Jeff Kinz wrote:
> >Hi Hendra, i think Bart miss-read your question. I think his advice
> >works very well for "NFA" (Network File Systems) but won't
> >work for "NTFS" file systems.
> >
> Hello Jeff,
> you're right. I thought he
Try one other thing, if you're using this in a camera. Try formating it
in the camera. I had a problem with a small 8mb card once and did this
and it was fine.
<>
On Sat, 2003-03-08 at 13:28, Benjamin wrote:
>
> I was instantly able to use a 32mb mem card (sandisk) where my 256mb (simpletech)
>
At 05:52 PM 04/02/2003, you wrote:
I'm having trouble building dante-1.1.13 on my RedHat 8.0 configuration.
This message may not be of any help to you at all, but I have successfully
built dante 1.1.11 on Redhat 7.1. As I recall, I had to make quite a few
changes to the dante source code in order
I found articles in google. have you tried yet? I'll look again but you'll probably get them before I do. I mounted a external usb drive formated ntfs on RH8.
Benny
Bart SCHELSTRAETE <[EMAIL PROTECTED]> wrote:
Jeff Kinz wrote:
On Sat, Mar 08, 2003 at 09:57:17AM +0100, Schelstraete Bart wrote:
I was instantly able to use a 32mb mem card (sandisk) where my 256mb (simpletech) was not ever attached.
the 32mb upon insertion was placed to /dev/hde(1) immediatly. Easily mountable and usable in RH8 on dell 7500 laptop.
Anyone else having issues with 256mb or higher flash type cards.
BennyD
I'm on a job here on Saturday and sorta' stuck, do any of you guys know the
command to add a route to a Bay Networks token ring router? It's apparently
not the same as a Cisco...
I'll check back in a bit.
Thanks,
Kerry Miller
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTE
hi chris,
a few things. what does the -l option stand for ? try using traceroute
without any options.
if your computer is connected in a network which is administered by
someone else, make sure they dont have a firewall. to check this you can
first do a traceroute to one of the machines in the ne
- Original Message -
From: "Bret Hughes" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, March 08, 2003 6:00 PM
Subject: Re: Large Network, need advice please!!!
> I am confused. Perhaps an overview of what you are trying to do would
> be in order. You speak of Internet conn
I got the same error on the squirrelmail update. The installation
got far enough along to hose my current squirrelmail installation,
but rpm -Uvh xxx --force fixed me up.
This isn't a good situation.
> On Sat, 2003-03-08 at 04:43, Chris wrote:
>>
>> The package kernel-2.4.18-26.8.0 does no
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 08 Mar 2003 15:17:08 +0100, Josip Gracin wrote:
> > Can you recompile the kernel with Red Hat's config?
>
> Nope.
.oO
> > What steps are necessary to reproduce it?
>
> cd /usr/src/linux-2.4
> make mrproper
> cp configs/kernel-2.4.18-athlon.conf
Greetings,
I have a Redhat 7.3 server, and a Redhat 8.0 laptop networked through a
Netgear router. I have file sharing working ok, but I can't get print
sharing to work.
On the server, I have a queue named hp841c defined as a local printer
attached to /dev/usb/lp0. Printing locally from the s
As root, if I use the command traceroute, for example
I type:
traceroute -l olug.org
The only output I get is:
1 * * *
2 * * *
3 * * *
4 * * *
Why does it do this and why am I not able to see the
ip addresses?
Iptables does not startup but if I do iptables -l,
[EMAIL PROTECTED] roo
Hi,
I have a Gateway 200 STM model laptop; it's floppy and cd-rw drives
are connected to the docking station. In the end, the cd-rw is connected to
the laptop via a firewire port. However, when I try to install RH8 (or any
other version/distro), the cd-rw is not recognized, thus making it d
Hi,
I have ATI radeon 9500 128 Mb DDR, configured as a VESA driver (generic)
in RH 8.0. Can I configure it out to watch dvd or whatever else on TV?
How can i do?
Thanks
Antonio Burzio
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinf
>> I've tried to hit a few websites that are https,
when
>> I do this Mozilla outputs something about PSM.
>> Can anyone give me more info. on this and how to
>> install it?
>The https support for mozilla is in the mozilla-psm
>package.
>Install that rpm and you should be good to go.
>Emmanuel
Jeff Kinz wrote:
On Sat, Mar 08, 2003 at 09:57:17AM +0100, Schelstraete Bart wrote:
hendra wrote:
Hai, anyone can help me. How to mount NTFS mode read-write?
I'm using LINUX RH 7.3.
Hi Hendra, i think Bart miss-read your question. I think his adv
On Sat, 2003-03-08 at 04:38, Michael Fratoni wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Friday 07 March 2003 11:51 pm, Bret Hughes wrote:
> > On Fri, 2003-03-07 at 22:00, Michael Fratoni wrote:
>
> > > > That being said I would like to see your script. ANy chance I can
> >
On Fri, 2003-03-07 at 23:18, William Warren wrote:
> On Fri, Mar 07, 2003 at 08:42:45AM -0600, Bret Hughes wrote:
> > On Fri, 2003-03-07 at 06:17, William Warren wrote:
> > > Bret,
> > >
> > > Sorry, I didn't see your note until I'd posted the ps output from inittab 5.
> > >
> > > Here's the outp
Go here: http://muse.linuxmafia.org/
Get gShield. It will save you time.
<>
On Sat, 2003-03-08 at 00:08, [EMAIL PROTECTED] wrote:
> Hello to you,
>
> If I want to allow users to use some of port numbers ( services ), eg :
> port 80 ( http ), port 53 ( DNS ), etc... only!
> So, how can I set the
I have the emu10k1 chipset and use the emu-config tools.
With this tools (only for the emu10k1 chipset) you can activate dolby
surround and much more features, 12dB boost and so on.
When the software only uses stereo, you cannot hear surround (xmms uses
all speakers itself), but you can record from
On Sat, 2003-03-08 at 00:42, Alex Iruc wrote:
> Dear Sirs,
>
> Maybe this is not the right place to ask this, but since I see that some of
> you people have a lot of experience with this kind of stuff I will ask
> anyway. (sorry if it's off-topic)
>
> This is what I want to do:
> I want to interc
Yes, there are, the wavelan and pcmcia drivers (i was told) aren't supported
by Turbocell protocoll which is what I need to have.
I read what you said and some of my own and I now see, what a symlink is and
what I was supposed to get with the ls command. The kernel, is not installed
I can tell you
On Friday 07 March 2003 05:09 pm, CM Miller wrote:
> I've tried to hit a few websites that are https, when
> I do this Mozilla outputs something about PSM.
>
> Can anyone give me more info. on this and how to
> install it?
>
> thanks
>
> -Chris
Basically you need to install the psm package to view
On Sat, 2003-03-08 at 04:43, Chris wrote:
>
> The package kernel-2.4.18-26.8.0 does not have a valid GPG signature.
> It has been tampered with or corrupted. Continue?
>
>
> Can someone tell me what dumb thing I'm missing here??
> Obviously there's not a corrupt rpm sitting on the redh
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 08 March 2003 06:43 am, Chris wrote:
[..]
>
> The package kernel-2.4.18-26.8.0 does not have a valid GPG signature.
> It has been tampered with or corrupted. Continue?
>
>
> I can continue to get and install all updates except fo
Michael Schwendt ([EMAIL PROTECTED]) wrote:
> Can you recompile the kernel with Red Hat's config?
Nope.
> What steps are necessary to reproduce it?
cd /usr/src/linux-2.4
make mrproper
cp configs/kernel-2.4.18-athlon.config .config
make oldconfig
make dep
make bzImage
/* each file gets the follow
Hi,
Create a file and add these lines, once done give it execute permissions.
and then add it this file to the cron.
date_str=`date '+%m%d%Y%H%M'`
/bin/tar -czvf "/root/dbman_back-$date_str"-tar.gz \
/var/www/cgi-bin/dbman
Ramesh
- Original Message -
From: "Cameron Simpson" <[EMAIL PROTEC
This is a Redhat issue, not LinNeighborhood. IIRC, you need to change
the permissions of /usr/bin/smbmnt and /usr/bin/smbumount to allow
execution by a user. This has security implications, though, so be aware.
Irv
Jim Hale wrote:
Thanks Irv!
I have it working great if I'm logged in as root -
I can't seem to find a group specifically for LinNeighborhood and so
many people seem to use it here that maybe they might know how to solve
this...
Thanks to the LN FAQ, I'm able to mount drives on my Win2K/AS box just
fine as root or a regular user. Now - if I just logout and log back in,
the mo
On 03:18 08 Mar 2003, M.Lewis <[EMAIL PROTECTED]> wrote:
| > Percents are special in Vixie cron crontabs. You need to slosh it:
| >
| > /bin/tar czvf /root/dbman_back-`date '+\%m\%d\%Y\%H\%M'`-tar.gz
| > /var/www/cgi-bin/dbman
| >
| > "man 5 crontab" says
| > [...] Percent-signs (%) in t
Thanks Irv!
I have it working great if I'm logged in as root - now if I could just
access the folders when I'm logged in as a regular user. I guess that's
a question for the LinNeighborhood list if I can find one. :)
Jim Hale
---
'Man Cannot Live By Bread Alone - He Must Also Have Peanut Butter'
I got it from here:
http://java.thn.htu.se/~toor/ (Near the bottom) :)
HTH
Jim Hale
---
'Man Cannot Live By Bread Alone - He Must Also Have Peanut Butter' -
Duffey,1986
---
The Hale Website Collection - 'The 'Bottoms' #1 Website!'
General/Personal Site: http://hale.dyndns.org
Image Galleries: ht
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 07 Mar 2003 23:18:19 +0100, Josip Gracin wrote:
> And I don't seem to be the only one who cannot compile a thing using GCC
> 3.2 from RedHat 8.0 (check with google for 'gcc 3.2 redhat segmentation
> fault'). In the middle of kernel compilation (al
On Sat, Mar 08, 2003 at 11:19:22AM +0100, Kleiner Hampel wrote:
>
> when trying to execute fbtv i get the error "the device /dev/fb0 does
> not exist"!.
> Is the framebuffer support in the kernel missing??
Are you sure you're in fb mode?
My grub config boots on this:
kernel /boot/vmlinuz-2.4.18
> -Original Message-
> From: M.Lewis
> Sent: Saturday, March 08, 2003 3:56 AM
> Subject: Crontab issue
>
>
>
> If I run the following from the comman line, it works properly:
>
> /bin/tar czvf /root/dbman_back-`date '+%m%d%Y%H%M'`-tar.gz \
>
> /var/www/cgi-bin/dbman
>
On Sat, Mar 08, 2003 at 09:57:17AM +0100, Schelstraete Bart wrote:
> hendra wrote:
> > Hai, anyone can help me. How to mount NTFS mode read-write?
> > I'm using LINUX RH 7.3.
Hi Hendra, i think Bart miss-read your question. I think his advice
works very well for "NFA" (Network File Systems) but
I'm running redhat 8 and am encountering something curious in regards to
up2date. I have for many months been successfully updating, but when
attempting to grab the new kernel I get the following message while
downloading:
The package kernel-2.4.18-26.8.0 does not have a valid GPG signatur
Hello,
is it right, that you don't have to install the cryptoapi support from
kerneli.org, because it already belongs to the kernel source in redhat
linux?
regards,
hampel
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
That didn't work Cameron. It gives me a file with the name of:
dbman_back-\03\08\2003\03\14-tar.gz
[snip]
> Percents are special in Vixie cron crontabs. You need to slosh it:
>
> /bin/tar czvf /root/dbman_back-`date '+\%m\%d\%Y\%H\%M'`-tar.gz
> /var/www/cgi-bin/dbman
>
> "man 5 cro
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 08 March 2003 01:33 am, Rodolfo J. Paiz wrote:
> On Fri, 2003-03-07 at 20:51, KC wrote:
> > > what is the linux source directory in 8.0?
> > >
> > > I'm trying to install wavelan and pcmcia drivers - but it needs to
> > > know where the red
Thanks Cameron. I'll give that a whirl.
Mike
On Saturday 08 March 2003 03:06, Cameron Simpson wrote:
> On 01:55 08 Mar 2003, M.Lewis <[EMAIL PROTECTED]> wrote:
> | If I run the following from the comman line, it works properly:
> |
> | /bin/tar czvf /root/dbman_back-`date '+%m%d%Y%H%M'`-tar.gz \
On 01:55 08 Mar 2003, M.Lewis <[EMAIL PROTECTED]> wrote:
| If I run the following from the comman line, it works properly:
|
| /bin/tar czvf /root/dbman_back-`date '+%m%d%Y%H%M'`-tar.gz \
| /var/www/cgi-bin/dbman
|
| However, it I put this in my crontab, I get the following:
|
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 08 March 2003 02:10 am, KC wrote:
> ok yes, how do i install the kernel?
Kernel-source, not kernel. Please make sure you have the right file.
If you have the kernel-source package that matches your running kernel,
install it using rom.
r
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 08 March 2003 12:13 am, KC wrote:
> ok one more thing, I went to /usr/src and there is something called
> linux-2.4.18-24.8.0
> but its not a directory, when I "ls" its greem colored, what is it?
Probably the result of the earlier commands
Php Version: PHP 4.2.2
Apache Version: Apache 2.0.40
How can i disable php engine to certain virtualhost or directory?
I've put "php_flag engine off" "php_value engine off" "php_value engine 0"
but it doesn't work for me. Restarting apache it doesn't give error but the
php engine continue to work
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 07 March 2003 11:57 pm, KC wrote:
> alright I typed this exactly (after I chmoded build to 755):
> /lib/modules/2.4.18-24.8.0/build ->
> ../../../usr/src/linux-2.4.18-24.8.0 and I got "Text File Busy"
>
> whats this mean?
It means you have s
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 07 March 2003 11:51 pm, Bret Hughes wrote:
> On Fri, 2003-03-07 at 22:00, Michael Fratoni wrote:
> > > That being said I would like to see your script. ANy chance I can
> > > talk you into undoing this abuse of mime types?
> >
> > Should b
Hello,
how can i map my keyboard keys?
I want to use the "Windows" key...
regards,
hampel
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
Hi,
but you get sound from the rear speakers with xmms, right?
regards,
hampel
Am Fre, 2003-03-07 um 17.32 schrieb AntonioBurzio:
> I have creative 5.1 inspire 5300 installed on my soundblaster audigy.
> now i can only ear sounds from my front speakers, what i have to do to
> make all 5 five spe
Hi!
when trying to execute fbtv i get the error "the device /dev/fb0 does
not exist"!.
Is the framebuffer support in the kernel missing??
regards,
hampel
Am Fre, 2003-03-07 um 23.19 schrieb Emmanuel Seyman:
> On Fri, Mar 07, 2003 at 01:15:21PM -0500, Robert Adkins II wrote:
> >
> > It was a
If I run the following from the comman line, it works properly:
/bin/tar czvf /root/dbman_back-`date '+%m%d%Y%H%M'`-tar.gz \
/var/www/cgi-bin/dbman
However, it I put this in my crontab, I get the following:
Subject: Cron <[EMAIL PROTECTED]> /bin/tar czvf /root/dbman_back-`da
1 - 100 of 102 matches
Mail list logo
