> ok now i'm thinking of NetGEAR MA101 which looks
> fine
>
> any happy user here ?
Yes, I have been using NetGear Products (i.e., AP and
fast ethernet switch) for my wireless applications. So
far so good.
__
Do You Yahoo!?
Stand a chance to win ca
I have setup my Redhat9 and Samba successfully.
By using smbclient, I am able to print a file to my
shared printer which connected at my Win2K machine.
However, using printtool -> Print Configuration, I am
not a ble to detect the printer.
Whenever I want to send a Test page job, I always got
"T
/usr/bin/gpm-root
missing/usr/sbin/gpm
Phoebe.
--- Michael Schwendt <[EMAIL PROTECTED]> wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Sat, 5 Jul 2003 22:02:00 -0700 (PDT), Phoebe CHAN
> wrote:
>
> > I set up the RedHat 9.0 on my laptop. After
Dear all,
I got another question. I installed Redhat 9.0 on my
laptop with touchpad (3 buttons). In the mouseconfig,
it recognized as Generic 3-button (PS/2). The left
and right buttons worked fine but not for the middle
button.I used to install the synaptics driver and
tpconfig but it didn'
Dear all,
I set up the RedHat 9.0 on my laptop. After I
installed the synaptics and tpconfig, I rebooted the
machine. I got the following error message:
console mouse services: execvp: no such file or
directory [Failed]
I didn't see this message when I startup the Linux
before . Do you have
Actually, I found that the server would not totally hanged. For much services it
cannot run, but I can still ping it and, use it to resolve DNS request (it has DNS
daemon, I use nslookup and point it to the server).
-Original Message-
From: Edward Dekkers [mailto:[EMAIL PROTECTED]
Sent
My Linux Server (Redhat 7.3) always hangs in a certain time. I need to cold boot the
device and everything can work fine then. However, after a while (irregularly), the
server would down again. I captured the log during the downtime. Have you seen it
before? I think the server cannot handle the
. Thanks!
-Original Message-
From: Jeff Kinz [mailto:[EMAIL PROTECTED]
Sent: Monday, March 10, 2003 2:33 AM
To: [EMAIL PROTECTED]
Subject: Re: Rysnc Problem
On Mon, Mar 10, 2003 at 02:23:07AM +0800, Gary Chan wrote:
> Dear all,
>
> I run rsync to sync the data between two
Dear all,
I run rsync to sync the data between two linux box. That is the master Server is Linux
A and the slave server is Linux B. Linux B would get the updated data from Linux B. I
run the cronjob everyday to do the job. However, just few day ago, I found that the
file cannot be synchronized
Dear Nate, Richie, Gordon and Todd A :
Thanks for all of your reply ! I am still trying but I think it should work
for me.
Thanks a lot !
Best regards,
Kevin
> Kevin Chan said:
> > Dear all,
> >
> > Some of my program will create a access_log on /server/logs/. But the
&
Dear all,
Some of my program will create a access_log on /server/logs/. But the size
of the log is huge after a 2 weeks, how can I set the access_log on
/server/logs/ will automatically rename the old access_log to access_log.1
and create a new access_log for reduce the file size ?
Thanks and re
Dear all,
I don't have any problem to run the webalizer from report directory as user
: root. But when I run the webalizer from / as below, it show error
"Permission denied".
[root@apache1 /]$ /home/web/report/webalizer access_log
bash: /home/web/report/webalizer: Permission denied
During I wan
Hi.
I use JDBC to retrieve an Oracle BLOB of either gif
or jpg or tif
Some of the BLOBs are fairly big e.g.
40+KBytes.
However most are smaller, around
10+KBytes.
I found that I can retrieve and display the "big"
blobs or write to to a file in a temp dir, but I cannot display the smaller
bl
Hi Todd and all,
I was change the /etc/fstab file to /dev/hda1 / ext3 defaults,usrquota 1 1
, but still got the same error message.
Does anyone success set the quota on RedHat 8.0 before, or this is the bug
on RH8.0 ?
Thanks and regards,
Kevin Chan
>Todd A. Jacobs Wrote:
>
> On T
method.
Thanks and regards,
Kevin Chan
>Todd A. Jacobs Wrote:
>
> On Thu, 7 Nov 2002, Kevin Chan wrote:
>
> > LABEL=/ / ext3
defaults,usrquota 1
> > after that, I try to run quotacheck -uva but get error message as below:
>
> L
ystem not mounted with
quota option.
[root@fileserver root]#
Can anyone tell me what's wrong on my setting and how to set the quota on
RedHat 8.0 ?
p.s. I don't have any problem using this method to set quota on RedHat 7.3
Thanks and regards,
Kevin Chan
--
redhat-list mailing l
Dear all,
My problem solved by type quotacheck -muva !
Thanks,
Kevin Chan
>Kevin Chan Wrote:
> Dear all,
>
> I was set the /etc/fstab as below:
>
> LABEL=/ / ext3defaults,usrquota
1
> 1
>
> after that, I try to run quotacheck
so counted
values might not be right.
Please stop all programs writing to filesystem or use -m flag to force
checking.
[root@btamail root]#
Can anyone tell me what's wrong on my setting and how to set the quota on
RedHat 7.3 ?
Thanks and regards,
Kevin Chan
--
redhat-list mailing
Dear all,
I would like say thanks to Emmanuel, Francisco, Anthony, Joshua and Helloa !
All yours solution are very helpful and my problem was solved now.
Thanks a lot !
Best regards,
Kevin Chan
>Emmanuel Seyman Wrote:
>
> On Wed, Nov 06, 2002 at 05:40:39PM +0800, Kevin Chan wrote:
Dear all,
I was change the /etc/inittab setting from id :5 to id:3 as below:
id:3:initdefault:
and
x:3:respawn:/etc/X11/prefdm -nodaemon
Can someone tell me how I can set the RedHat 7.3 start to text mode ?
Thanks and regards,
Kevin
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PRO
tions were not too long.
Thank you very much indeed. I tried to shift to Linux
but it seems not so simple. Hope you can help me.
Raymond Chan
__
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/
--
redhat-lis
You need both :
A startup script for Oracle and setting the global system parameters.
In /etc/sysctl.conf , I set kernel.shmmax=
Hope that helps
- Original Message -
From: "Robert Monical" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 30, 2002 07:12 PM
Subject: Sett
There has been quite a lot of discussions about that.
They are default ORBit files, an open source CORBA.
- Original Message -
From: "Robert Monical" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 30, 2002 07:15 PM
Subject: /tmp/orbit-root ???
> This is a new instal
Hi All.
A bit out of context here, but this is one of the
most knowledgeable and helpful forum ...
I have an Oracle table , each row has one CLOB and
one BLOB.
I have been able to stream documents into and
out of the BLOB's incl. MS .doc Also I have been able to get the content from
BLOB and
There they are again, always with a user's owner.group and filesize 0.
Just because I keep looking over my shoulder to check if anyone's following
me doesn't mean I am paranoided...
- Original Message -
From: "Gordon Messmer" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, Septe
ROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, September 27, 2002 12:13 PM
Subject: Re: Is this a virus : "/tmp/orbit-"
> On Fri, 2002-09-27 at 08:08, Arthur Chan wrote:
> > Hi All.
> > I have these strange sub-dirs in /tmp/orb-
> > , and in these sub-dir
Hi All.
I have these strange sub-dirs in
/tmp/orb- , and in these sub-dirs , hundreds of files
names like this : "srwxr-xr-x orb-29348673785".
In the /tmp directory itself, many hundreds
of files with names similar to this : "file-fdhfgv878r"
Never seen them before, propagate faster than
r
Can someone give a suggestion to help me fix this problem ?
Thanks a lot !
Kevin
- Original Message -
From: "Kevin Chan" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, September 19, 2002 1:43 PM
Subject: How to disable the screen saver mode ?
>
Dear all,
I have one very sample question would like to ask all of you.
My problem is :
After I reboot my RedHat 7.3 Linux, the XWindows already turn ON the
screen saver mode after few minutes.
Even I was setup the screen saver to NONE and set the time to 8000 min on my
XWindows already, but
r as picking up
> kernels. You will need to modify the conf file if you want to change the
menu
> timeout or if you have a particularly strange lilo configuration. But it
will
> pick up your current setup rather well with very few exceptions.
>
> > At 05:31 PM 9/10/2002 -0400, you wrote:
Hi all.
I just built a gateway machine : eth0 to DSL
with NAT and eth1 is internal.
DSL does forwarding with single static ip supplied
by ISP. That part is fine.
Now I want to have a firewall on the gateway
machine, up pops ipchains.rules for input, output and forwarding. That's
when issue
get around that ? Manually removing the objects
???
- Original Message -
From:
Arthur Chan
To: [EMAIL PROTECTED]
Sent: Tuesday, September 10, 2002 05:12
PM
Subject: Circular argument installing
BIND-9.2.1 over Bind-9.1.0
Hi
I had bind-9.1.0 installed whic
Hi
I had bind-9.1.0 installed which I want to
replace with the downloaded bind-9.2.1 from ISC
Using "rpm -Uvh bind-9.2.1" I got the error message
that it failed dependencies test , missing "libdns.so.5" and
"libisc.so.5".
So I applied "rpm -Uvh bind-utils-9.2.1" and it
reported a conflict wi
Hi All .
Hi Aly.
Is there any painless and easy way to move from
lilo to grub ???
Hi all.
One of my boxes uses SCSI. On the ASUS m/b I
toggled EIDE h/d off. This is fine for the
BIOS on booting up, it fines the Adaptec and proceeds happily.
However when RH7.1 loads, it starts looking for
hda, hdb etc when in fact they are sda, sdb etc and RH7.1 throws these
error messag
Hi
I am unsure where to put my ipchain rules. It is
also a matter if timing.
As I understand it , on booting RH :
(1) init runs /etc/inittab
(2) then /etc/rc.d/rc.sysinit
(3) then /etc/rc.d/rc.local
Then at some point in time, init recognises
the runlevel and run the links in rc(n).d e.g.
Hi !
I have this old m/b with integrated graphics
controller. The box boots to command line and has only the bare RH
essentials.
The default font is very bad for eyes, so I
added "VGA=ASK" to lilo.conf.
On rebooting, I can either specify the listed
display options (all low-res) or type in "
Hi.
I know this has been asked before.
I have a RH7.1 box that boots to command line and
has only the vrey bare essential ie no X11 , Gnome , whatever...
The font size at command line level is very bad for
eyes .
Are there any ways that can be changed ? I know the
onboard AGP can support tha
Hi
I usually use Realtek , but this time I picked up
some DLink TFE-530+ nic's
Seems okay, modules.conf has the entries eth0
8139.too and eth1 8139.too
Looks okay on "ifconfig -a", but then when I do a "route" it takes a long time to recognise
the default route and I don't seem to be able to
Hi all !
I am being pre-emptive here.
I am using RH7.1 and have to make Apache-1.3.19-5
httpd talk with Tomcat 4.0.4 , to this end, I will be using mod_jk!
Does anyone know wether there are any problems with
this version configuration ???
How do I find out whether my Apache is DSO-enabled
?
T
Hi !
Recently there was some chat about "real
Unix".
Was there any seminal comparative studies
between FreeBSD (or even NetBSD) and Linux ?
BSD has been around a long time.
Why Linux ? Why not BSD ? Drivers ? Platforms and
chipsets ?
Are there anything one can do with Linux which
one cannot
Hi !
Is there anyway to enable SMP without doing a full
install again ?
I recall seeing a search engine for the archive
database, just can't remember where.
How do I search the archive for the emails
?
Thx
Hi !
I am creating DataSources for Ora
ConnectionPools (JAVA servlets) and it seems I need to create a "context object"
first.LDAP was mentioned and appealed to me.Reading up on Oracle, JNDI
was explicitly recommended.Also, JNDI seems to be used only on J2EE, but I
have J2SDK standard edtion
Please Help !
- Original Message -
From: "Kevin Chan" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, February 25, 2002 12:02 PM
Subject: Re: Can someone teach me how to set the IP-Table on RedHat 7.2 ?
> Hi Paul and all,
>
> First, I would like
fig the IP-Table and make all the
internal PC can telent, browse and check email ?
Thanks and regards,
Kevin Chan
> iptables it the firewall of choice on kernel 2.4. There is a very nice
well
> documented script to run iptables it is called gShield. Get it from here
> http://
550 Arapahoe Ave. #6
> http://www.pcraft.com . . .. Boulder, CO 80303, U.S.A.
>
> ___
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
begin: vcard
fn: Hendrick Chan
n:
tc/ppp/ip-down.local
---
#!/bin/bash
ipchains -D forward -s 10.0.0.1 -d 0/0 -j MASQ
exit 0
Please teach me how & where I can set the IP-Table to solve my
problem thanks !
Best regards,
Kevin Chan
___
rk because I am still using it with RH 7.0 (Not RH 7.2).
After I install a new ppp server on RH 7.2 , the problem was exist so that I
think there is a way to do it on RH 7.2 .
Thanks and regards,
Kevin Chan
> Hello Kevin,
>
> Wednesday, February 20, 2002, 3:06:37 AM, you textually ora
orward = 1
# Enables source route verification
net.ipv4.conf.default.rp_filter = 1
# Disables the magic-sysrq key
kernel.sysrq = 0
Thanks and regards,
Kevin Chan
> > Dear all,
> >
> > I would like to know where I can set the IP Forwarding in RH 7.2 and why
I
> > ca
!
Best regards,
Kevin Chan
> I use netcfg under console but never tried within X. Not sure why but
> just open a terminal window and place
> the echo 1 > /proc/sys/net/ipv4/ip_forward in your rc.local and you can
> actually run rc.local by typing as root /etc/rc.d/rc.loca
Dear all,
I would like to know where I can set the IP Forwarding in RH 7.2 and why I
can't use the "netcfg" under Xwindow ? Does anyone can teach me how to do
it ?
THANKS !
(p.s. I know there are button call IP Forwarding in "netcfg" on RH 7.0)
Thank
" under Xwindow ?
(p.s. I know there are button call IP Forwarding in "netcfg" on RH 7.0)
Best Regards and Thanks Again !
Kevin Chan
> Kevin:
>
> Have you tried an IP address assignment in /etc/ppp/options.ttyS0? For
> you
> I see your dial in server has the address
Dear all,
I would like to know where I can set the IP Forwarding in RH 7.2 and why I
can't use the "netcfg" under Xwindow ?
(p.s. I know there are button call IP Forwarding in "netcfg" on RH 7.0)
Thanks and regards,
Kevin Chan
__
#!/bin/bash
ipchains -D forward -s 10.0.0.1 -d 0/0 -j MASQ
exit 0
Please check and see it will help you to solve my problem or not ?
If you need more infomation from my server, please let me know ! Thanks !
Best regards,
Kevin Chan
> Kevin:
>
> I need to know how you assign IP add
A. Any suggestions and
> personal experiences would be greatly appreciated.
>
> Thanks,
> Chuck
>
> ___
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
begin: vcar
Hi all,
Does anyone can help me to solve my problem? I really need your
help.THANKS A LOT !
Best regards,
Kevin Chan
- Original Message -
< Kevin Chan Wrote:>
> Hi Eddie,
>
> Thanks for your suggestion and I was try to answer all your question as
> below to
E/NT) ?
Thanks a lot !
Best regards,
Kevin Chan
- Original Message -
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> [EMAIL PROTECTED] wrote:
>
> >> >http://www.prairienet.org/redhat/
> >>
> >> Close ...
> >>
> >> http:/
; *
> Are you using DHCP or options.ttySx files for IP addressing?
[root@LServer ppp]# more options.ttyS0
LServer:ppp-client
Best regards,
Kevin Chan
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
sure all the username and password is right and I don't have
this kind of problem on RedHat 7.0)
Thanks and regards,
Kevin Chan
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
Thanks and regards,
Kevin Chan
client as
well ?
Thanks and regards,
Kevin Chan
Title: Unable to run the shutdown command
I cannot run the shutdown command. A segmentation fault occurs.
Any ideas?
This e-mail has been checked for viruses by MimeSweeper.
Dear all,
PLEASE HELP !
I would like to know how to create the username and password on LDAP server.
I only want each user has their own username and password when they search
the address book from Microsoft Outlook Express ?
Thanks and regards,
Kevin Chan
be appreciated...:)
>
> Jeff Go
> SAP Labs
> BSS System Services
>
> ___
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
begin: vcard
fn: Hendrick Chan
n: Chan;Hendrick
or
,subinitial
index cn,sn,st
pres,eq,sub
Thanks and regards,
Kevin Chan
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
,subinitial
index cn,sn,st
pres,eq,sub
Thanks and regards,
Kevin Chan
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
grpquota after defaults
(e.g. defaults,grpquota) on your /var/spool/mail OR / partition.
4.cd /var/spool/mail OR cd /
5.quotacheck -ugav
6.edquota groupname( start set the soft limit and hard limit for
each the group )
Hope it will help !
Kevin Chan
> users on my system do
Hi Nathalie,
I think you may set quota for each user on their /home directory (if you set
the mail deliver to their /home)
You may use "userquota" or "grpquota" to set the quota for them.
If you need more information for set the quota, just let me know ! Good
Luck !
Kevin
> Is there an opt
Dear all,
I would like to ask how to set the IP Forwarding from my RedHat 7.0 Server.
My Server IP is 192.168.X.X and the clients which use ppp connected to my
server is 10.0.0.3 . Thanks a lot !
Thanks and regards,
Kevin Chan
___
Redhat-list
pd silent auth -chap +pap login
Thanks and regards,
Kevin Chan
> Original Message -
> From: "Michael R. Jinks" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, April 18, 2001 10:58 PM
> Subject: Re: How to setup Dial-in Server ?
p login
Thanks and regards,
Kevin Chan
Original Message -
From: "Michael R. Jinks" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 18, 2001 10:58 PM
Subject: Re: How to setup Dial-in Server ?
> Have you tried the PPP-HOWTO? PPP dialup can
Dear all,
I am using RedHat 7.0 and want to set-up a Dial-in
(PPP) Server. Also, I am using USR Extenal Modem which is connected to
COM1. Do you mind to teach me know how I can do it because I am new using
linux? I am try to use mgetty and search the set-up method from
internet but it
Linksys EtherFast CBL/DSL Router 1-port 10/100 Hub.
Hector M Banda wrote:
> I need to get a firewall for my server to protect it from hackers.
> Can somebody recommend anyone?
>
> I heard something about starfire or something like that.
>
> Thanks,
>
> ___
There is a company called MDS Disk Services, Phone number 909-352-2425.
Steve Gulick wrote:
> Can anyone recommend a good data recovery company that specializes in Linux
> data recovery?
>
> A whole directory tree was deleted today and it looks like we are going to
> have to send it out to try a
Why xhost +1?
The magic word is DISPLAY. In the X window system, a display consists (simplified) of
a keyboard, a mouse and a screen. A display is managed by a server
program, known as an X server. The server serves displaying capabilities to other
programs that connect to it.
A display is ind
vcard
n:Chan;Hendrick
tel;fax:408-735-9653
tel;work:408-530-6453
x-mozilla-html:FALSE
url:http://maxim-ic.com
org:Maxim Integrated Products;CAD
adr:;;120 San Gabriel Drive ;Sunnyvale;CA;94086;USA
version:2.1
email;internet:[EMAIL PROTECTED]
fn:Hendrick Chan
end:vcard
url:http://maxim-ic.com
org:Maxim Integrated Products;CAD
adr:;;120 San Gabriel Drive ;Sunnyvale;CA;94086;USA
version:2.1
email;internet:[EMAIL PROTECTED]
fn:Hendrick Chan
end:vcard
t-list mailing list
>[EMAIL PROTECTED]
>https://listman.redhat.com/mailman/listinfo/redhat-list
Regards,
Michael Chan
[EMAIL PROTECTED]
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
EMAIL PROTECTED]
> > https://listman.redhat.com/mailman/listinfo/redhat-list
>
> ___
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
begin:vcard
n:Chan;Hendrick
tel;fax:408-735-9653
tel;work:4
3
tel;work:408-530-6453
x-mozilla-html:FALSE
url:http://maxim-ic.com
org:Maxim Integrated Products;CAD
adr:;;120 San Gabriel Drive ;Sunnyvale;CA;94086;USA
version:2.1
email;internet:[EMAIL PROTECTED]
fn:Hendrick Chan
end:vcard
0 San Gabriel Drive ;Sunnyvale;CA;94086;USA
version:2.1
email;internet:[EMAIL PROTECTED]
fn:Hendrick Chan
end:vcard
968367590
> Fax: +34 968363389
begin:vcard
n:Chan;Hendrick
tel;fax:408-735-9653
tel;work:408-530-6453
x-mozilla-html:FALSE
url:http://maxim-ic.com
org:Maxim Integrated Products;CAD
adr:;;120 San Gabriel Drive ;Sunnyvale;CA;94086;USA
version:2.1
email;internet:[EMAIL PROTECTED]
fn:Hendrick Chan
end:vcard
ere I can get it.
MM> Thanks
MM> Michael
MM>
MM>
MM> --
MM> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
MM> as the Subject.
MM>
MM>
_,,
Hello Margaretha Sulistyoningsih (On 06/25/00,12:01pm,you wrote Re: Re:...
MS> Thank's to Stephen Liu, Elaine(Er-Chan), Claudiu Balciza, Linda Hanigan, for
MS> their answer.
MS> Because of you all right now I can compile with gcc -o.
MS>
MS> I try to run all command fro
Hello Margaretha Sulistyoningsih (On 06/21/00,9:37pm,you wrote Re: Re:...
MS> I still need further answer from you and also from others.
MS>
MS> Thank you so much, Claudiu, and also for Stephen and er-Chan.
MS>
MS> For er-Chan : would you tell me spesifically the name of the
MS> Marisa Mack <[EMAIL PROTECTED]> wrote:
MS> do you have glibc-devel installed? you need this.
MS>
MS>
MS> ***Yes, Marisa, I have glibc-devel-2.1.1-6 installed in my computer. But still
MS> I cann't compile with gcc -o.
MS>
MS> --Ritha--
I think you also need kernel-h
Hello Chad W. Skinner (On 06/04/00,10:42pm,you wrote Re: RE: tartar sauce)
>
> > but one of the files I have is "filename.tar.tar" so,wouldn't
> > that require an extra step?
>
> Are you sure the files you are downloading are tar.tar and not .tar files.
> If you are using windows98SE with IE 5
I would like to install tripwire 2.2.1 which I go from their website
a few weeks ago. The users manual says the minimum memory requirement
is 32 megs RAM(64 megs recommended). I have 16 megs plus 48 megs of
swap(an old 486 I play with); will that work?
## er-chan # at ## scn.org
## er-chan # at ## scn.org ### at usa.net ##
On Sun, 12 Mar 2000, Vidiot wrote:
> It was mentioned here that if you don't like disk druid (like me) and
> you want to use fdisk, just go to one of the other consoles and run fdisk.
##If at the beginning of the
www.amazon.com has Sed and Awk (nutshell handbook) $23.96
## er-chan # at ## scn.org ### at usa.net ##
On Sat, 4 Mar 2000, Steven W. Orr wrote:
> Can I suggest instead that you look at the awk info pages. That is more
> pertinent to the awk that comes on Linux and
Thanks alot for responding. I will install the rpm for php !!
## er-chan # at ## scn.org ### at usa.net ##
On Thu, 24 Feb 2000, M. Erickson wrote:
> On Thu, 24 Feb 2000, er-chan wrote:
>
> > I am a newbie server admin RH6.1. Apache 1.3.9 is running a
be most efficient for speed but maybe easier to install
and learn scripting for a newbie. thanks
## er-chan # at ## scn.org ### at usa.net ##
On Thu, 24 Feb 2000, Dave Reed wrote:
> > From: er-chan <[EMAIL PROTECTED]>
> >
> > I am a newbie server admin
I am a newbie server admin RH6.1. Apache 1.3.9 is running and I want to
install php4 as a cgi in order to learn some php scripting. What is the
easiest most fail-safe way to add php4beta ??? tia from [EMAIL PROTECTED]
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the S
Info pages can be viewed through mc (midnight commander) on
ftp://updates.redhat.com as well.
###
On Fri, 18 Feb 2000, Thomas Ribbrock (Design/DEG) wrote:
> On Thu, Feb 17, 2000 at 05:11:03PM -0600, Bret Hughes wrote:
> > I used wget the first time yesterday. T
in the RH6.1 standalone version of apache, you can stop it from
the console by typing in the following
kill -TERM `cat /var/run/http.pid`
## er-chan # at ## scn.org ### at usa.net ##
On Mon, 14 Feb 2000, Danny wrote:
> I never heard any inter relaton between km
check to see if you have groff installed. It doesn't work
without it(updates may have one)
##er-chan###
On Wed, 2 Feb 2000, Robert D. Williams wrote:
> When I type in man XXX I get &q
You could write a script to automate the process for you...
C'ya,
Edmund
[EMAIL PROTECTED]
"Todd A. Jacobs" wrote:
> On Sat, 25 Dec 1999, Todd A. Jacobs wrote:
>
> > I have a need to change a number of system daemons that have UID/GID's
> > higher than 500 to something lower. Can I simply make
I download all the RH5.1 files from ftp
site
Then I copy them into a cd-rom (using
cd-writer). During the installation process, the program cannot reconize my
cd-rom as a Red Hat CD-ROM in the drive. I am sure the cd-rom drive is mounted,
coz the intallation program prompt me to inser
Has anyone had the problem where they cannot cut and paste using the mouse
after installing RH 5.1? My old RH 5.0 system had no problems, now, with
same hardware, the mouse works, but I cannot select text with the first
button and paste it by another button. Is this a bug in RH 5.1 or
XFree86_SVG
On Thu, 4 Jun 1998, Rick Forrester wrote:
>
> [EMAIL PROTECTED] said:
> > I emailed this to [EMAIL PROTECTED], but recieved no response. xv,
> > while dynamically linked with libc6, is looking for the libc5
> > library. Doing a strace, shows it looking for it in /usr/lib /lib /
> > usr/loc
100 matches
Mail list logo