RE: [Repeater-Builder] Wanted - UHF Amplifier

...@yahoogroups.com] On Behalf Of Larry Watkinson Sent: Monday, July 19, 2010 12:11 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Wanted - UHF Amplifier K5In and I are looking for a couple of UHF Amplifier's that will have 10 to 25 watts in and 70 to 100 watts out. We would pre

[Repeater-Builder] Wanted - UHF Amplifier

K5In and I are looking for a couple of UHF Amplifier's that will have 10 to 25 watts in and 70 to 100 watts out. We would prefer n-connectors but will accept other connectors. Thanks, Larry KC7CKO

[Repeater-Builder] Wanted: Motorola PT-400 Lunchbox radio

Hi everyone! I have been contacted by a group which is involved in a restoration project at the Reagan Ranch and they are in need of a Motorola PT-400 for one of their artifacts. I looked through my own pile and all I have left is a PT-500 which won't work for them. So I promised that I would pos

Re: [Repeater-Builder] Wanted: G.E. VHF HB UHS preamp

Bob, I have some. You gonna make the big show this year? As we have in the past few years Elisha and I will try to make an appearance at the Hamvention for at least one day. I'm not sure if it will be Friday or Saturday yet. Repeater-Builder will not be making an appearance at this year's show

[Repeater-Builder] Wanted: G.E. VHF HB UHS preamp

Bought one several years ago from Kevin @ the Repeater-Builder booth in Dayton. Works very well (~0.13 µV for 12 dB SINAD on the MVP it's in), but now I need another one. Got another one, Kevin? If not, does anyone else? BTW, I did the antenna-load sensitivity substitution test last night on

Re: [Repeater-Builder] WANTED: MASTR II Low-Band Receiver

Dick, I have two that I removed from a 10M transmitter I built. I am fairly sure they are 12 split RX's. E-mail me privately if you are still in need. Scott n3xcc at repeater-builder.com Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531 Richard W. Solomon wrote: > Lo

RE: [Repeater-Builder] WANTED: MASTR II Low-Band Receiver

@yahoogroups.com Subject: [Repeater-Builder] WANTED: MASTR II Low-Band Receiver Looking for a spare Low-Band Receiver, 12 or 13 split. Failing that, I'll take the whole mobile. Anyone have one they want to part with ? Thanks, Dick, W1KSZ

[Repeater-Builder] WANTED: MASTR II Low-Band Receiver

Looking for a spare Low-Band Receiver, 12 or 13 split. Failing that, I'll take the whole mobile. Anyone have one they want to part with ? Thanks, Dick, W1KSZ

Re: [Repeater-Builder] Wanted: Parts list for Hamtronics R76 10 Meter Receiver

Does JV at Hamtronics not have that info? Doug On 07/01/2010 16:33:41, skipp025 (skipp...@yahoo.com) wrote: > Wanted: Parts list for Hamtronics R76 10 Meter Receiver > > I know this is a shot in the dark, but I'm going > to ask anyway. > > Does anyone here have a copy of the Hamtronics R7

[Repeater-Builder] Wanted: Parts list for Hamtronics R76 10 Meter Receiver

Wanted: Parts list for Hamtronics R76 10 Meter Receiver I know this is a shot in the dark, but I'm going to ask anyway. Does anyone here have a copy of the Hamtronics R76 VHF FM Receiver (low band) parts list (I have the instructions) for the 10 Meter Band Version. Again I only need the pa

Re: [Repeater-Builder] Wanted: Custom NWS Weather Alert SAME Audio

More on EAS: http://www.defcon.org/images/defcon-16/dc16-presentations/defcon-16-flux.pdf

Re: [Repeater-Builder] Wanted: Custom NWS Weather Alert SAME Audio

At 08:16 PM 11/22/09, you wrote: >I'm building/testing a DIY weather receiver/decoder and could use a >couple custom weather alerts to inject into my service monitor. I >need the preamble/header code portion of the alert with a specific >FIP and Event codes. Anybody aware of a software-based

Re: [Repeater-Builder] Wanted: Custom NWS Weather Alert SAME Audio

Its a little difficult as the alerts are time and Julian day specific. http://www.circuitcellar.com/avr2006/winners/AT3249.htm On Sun, Nov 22, 2009 at 9:16 PM, cracked wrote: > I'm building/testing a DIY weather receiver/decoder and could use a couple > custom weather alerts to inject into my s

[Repeater-Builder] Wanted: Custom NWS Weather Alert SAME Audio

I'm building/testing a DIY weather receiver/decoder and could use a couple custom weather alerts to inject into my service monitor. I need the preamble/header code portion of the alert with a specific FIP and Event codes. Anybody aware of a software-based generator? Another option would be so

[Repeater-Builder] Wanted UHF MVP

Hi guys, I have been reading this list for a long time and now its time to take the plunge. I need to build a portable UHF repeater for my SAR team. So, I am looking for a UHF MVP. I will pay a reasonable price and shipping to Atlanta, 30317 I am looking forward to trying this and I will be a

[Repeater-Builder] Wanted: IFR COM-120B service manual

Anyone have a service manual for an IFR COM-120B? I am in need of a schematic for the internal power supply module. IFR wants big bucks for a manual, and Google searches have been fruitless. Thanks Eric KE2D

Re: [Repeater-Builder] Wanted - Single Channel Motorola Micor

Do you need a complete radio or just a control head and speaker for under the dash? Do you care if the radio works? wb5oxq - Original Message - From: littlejimmy74 To: Repeater-Builder@yahoogroups.com Sent: Wednesday, November 04, 2009 7:51 AM Subject: [Repeater-Builder

[Repeater-Builder] Wanted - Single Channel Motorola Micor

Hi, I am new to the group so apologies if this is not what it was intended for. I have just bought a replica Starsky and Hutch Ford Gran Torino and I am looking for a single channel Motorola Micor just like the ones used in the TV show (apparently). It will most likely just be for show, so as lo

[Repeater-Builder] Wanted VHF Duplexer Ham 2 meter

I need 4 or 6 can set VHF cans. Shipping to Aiea, Hi 96701. Chris NH7QH

Re: [Repeater-Builder] Wanted: GE Versatone Network for 82.5

e, 10/6/09, w6jll wrote: From: w6jll Subject: [Repeater-Builder] Wanted: GE Versatone Network for 82.5 To: Repeater-Builder@yahoogroups.com Date: Tuesday, October 6, 2009, 10:56 AM   Looking for a (white) GE Versatone Network for MII/MVP on 82.5. If you have on

[Repeater-Builder] Wanted: GE Versatone Network for 82.5

Looking for a (white) GE Versatone Network for MII/MVP on 82.5. If you have one to sell please contact me either via the group or directly at w6...@scdxc.org. Thanks Fred

[Repeater-Builder] Wanted: Hardline Connector installed N NJ

Wanted Someone to install 4, N connectors on 7/8ths hardline, before Sunday 13 Sept. Location is Northern NJ. We could possibly bring the Hard Line to you for the install. Please contact Dave Hubbell 862.266.2339 Thanks in advance Dave

Fw: Re: [Repeater-Builder] Wanted: IFR FM/AM 1500 Owners Manual

Thanks vy much for doing this, Joe. What a lot of work! --John --- On Sun, 8/30/09, Joe wrote: From: Joe Subject: Re: [Repeater-Builder] Wanted: IFR FM/AM 1500 Owners Manual To: Repeater-Builder@yahoogroups.com Date: Sunday, August 30, 2009, 6:14 AM   I

RE: [Repeater-Builder] Wanted: IFR FM/AM 1500 Owners Manual

>-Original Message- >From: Repeater-Builder@yahoogroups.com [mailto:Repeater- >buil...@yahoogroups.com] On Behalf Of surf_boy82 >Sent: Saturday, August 29, 2009 9:11 PM >To: Repeater-Builder@yahoogroups.com >Subject: [Repeater-Builder] Wanted: IFR FM/AM 1500 Owners Man

Re: [Repeater-Builder] Wanted: IFR FM/AM 1500 Owners Manual

I scanned the IFR1500 Application Notes a couple of months ago and posted it to: http://groups.yahoo.com/group/Repeater-Builder/files/IFR1500/ You may find this helpful. I'm interested in information about the digital attenuator and LCD display that you have Was that and IFR product or someth

[Repeater-Builder] Wanted: IFR FM/AM 1500 Owners Manual

Does anyone have an owners manual for the IFR FM/AM 1500 that is surplus to their needs? I've had one for quite a while and I'm familiar with most of it's operation but wouldn't mind having the proper manuals for it. My unit has the digital attenuator with LCD display on it. Would prefer not to

[Repeater-Builder] Wanted: Stabilock 4015 RF Unit

I have been unlucky with my Stabilock 4015 lately. First of all some may ask why didn't you get a HP, and I will tell you that over here in Europe HPs are just not nearly as widespread as in the US. First the computer board was faulty and I finally sent the monitor to a specialist in Germany for d

[Repeater-Builder] WANTED: db403X cans

Does anyone have some cans from a db4030 or db4032 duplxer ? Just need a couple cans and harness Thanks! Chris Kb0wlf

[Repeater-Builder] Wanted: GE 19B226748G1 BANDPASS BOARD

Hi all, I am in need of a 19D423249G1 board. I found out this is needed to make the PLL exciter work on the lower end of the two meter band in the 145 range. This is the Band-Pass board that plugs in the the GE Master II exciter. I do NOT want the G2 board. My mistake. 73s Steve W4SEF

RE: [Repeater-Builder] Wanted N type T connector

> I've been reading up on > "How to Modify a Sinclair Q2220E 132-174 MHz Duplexer to 220 MHz" > as Dave C has done. > > Where/who supplies these connectors.. > > 73 John > VK4JKL IRLP 6163 Delta Electronics - www.deltarf.com http://www.deltarf.com/results/p60.pdf ---

Re: [Repeater-Builder] Wanted N type T connector

how many do you need ? On Fri, Apr 10, 2009 at 2:52 AM, jgielis wrote: > > > Hi Guys, > > I've been reading up on > "How to Modify a Sinclair Q2220E 132-174 MHz Duplexer to 220 MHz" > as Dave C has done. > > Where/who supplies these connectors.. > > 73 John > VK4JKL IRLP 6163 > >

[Repeater-Builder] Wanted N type T connector

Hi Guys, I've been reading up on "How to Modify a Sinclair Q2220E 132-174 MHz Duplexer to 220 MHz" as Dave C has done. Where/who supplies these connectors.. 73 John VK4JKL IRLP 6163

[Repeater-Builder] Wanted - MSR2000 UHF receivers

I'm looking for a couple of MSR2000 UHF receivers, in the 450~470 MHz split (will be used at 440.750). I might also be interested in one (1) in the 470~512 split if the price is right, since I have a 450~470 MHz helical filter assembly from a hopelessly dead UHF receiver and I guess I can do a

[Repeater-Builder] Wanted: PCRC II Repeater Controller

Does anyone have an old PCRC II Personal Computer Repeater Controller board they are willing to part with? I need to replace an existing PCRC II installation hit by lightning. Software not required, but I am willing to provide a copy(along with a scanned PDF copy of the manual) to anyone that

[Repeater-Builder] WANTED: Cushman Application Notes on Duplexer Tuning

WANTED: Does anyone have a copy of the Cushman Application Note on Duplexer Tuning using the CE-50A, CE-5100 and CE-5110? This is similar to the Cushman Application Notes: CE50A_SERIES_PART_1_TRANSMITTERS.pdf (3.2mB) CE50A_SERIES_PART_2_RECEIVERS.pdf (3.5mB) CE50A_SERIES_PART_3_SPECTRUM_MONITO

RE: [Repeater-Builder] WANTED: exec II desktop

epeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] WANTED: exec II desktop I have a few, all 100% working, clean. uhf and vhf, 50.00 each, plus shipping. (desk models) Lance N2HBA - Original Message - From: Chris Curtis <mailto:demo...@rollanet.org>

RE: [Repeater-Builder] WANTED: mastr II mobile coax assemblies

: Saturday, March 07, 2009 6:47 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] WANTED: mastr II mobile coax assemblies I do not believe that any of these cable assemblies utilize double shielded coax. If someone knows differently, please let the group know. Personally,

Re: [Repeater-Builder] WANTED: mastr II mobile coax assemblies

At 3/7/2009 16:34, you wrote: >So, does anyone have a handful of coax assemblies they took out of mastr II >mobiles? > >You know, the phono to so-239 bits? > >OR, what's the consensus on adding the rx "port" in a conversion? The Mastr II mobile has never been my favorite for repeater conversions,

Re: [Repeater-Builder] WANTED: mastr II mobile coax assemblies

s are available from The RF Connection. Chuck WB2EDV - Original Message - From: "Chris Curtis" To: Sent: Saturday, March 07, 2009 7:34 PM Subject: [Repeater-Builder] WANTED: mastr II mobile coax assemblies > So, does anyone have a handful of coax assemblies they took out of mas

[Repeater-Builder] WANTED: mastr II mobile coax assemblies

So, does anyone have a handful of coax assemblies they took out of mastr II mobiles? You know, the phono to so-239 bits? OR, what's the consensus on adding the rx "port" in a conversion? Thanks for your time. Chris Kb0wlf

Re: [Repeater-Builder] WANTED: heliax

Chris Curtis wrote: > Ok, so I also could use some heliax. > > Now, I understand fsj is the flexi but is it really that bad to install from > antenna to shack? > > The reason I ask is there is some fsj4 on ebay. No ldf in any considerable > length. > > I was looking at ldf1 but got quoted 1.25

RE: [Repeater-Builder] WANTED: exec II desktop

ry 24, 2009 4:23 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] WANTED: exec II desktop I have a few, all 100% working, clean. uhf and vhf, 50.00 each, plus shipping. (desk models) Lance N2HBA - Original Message - From: Chris Curtis <mailto:demo...@roll

RE: [Repeater-Builder] WANTED: heliax

Both connection points are weather proof. Thanks Chris Kb0wlf -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Curt Seaton Sent: Tuesday, February 24, 2009 4:05 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-

Re: [Repeater-Builder] WANTED: heliax

I posed this question to Tessco a few years ago regarding the use of FSJ cable outdoors. Evidently there were concerns years ago regarding the use of FSJ, or Superflex cables for antenna jumpers. I was assured that any past problems have been resolved. I never verified this with the manufact

RE: [Repeater-Builder] WANTED: heliax

-buil...@yahoogroups.com] On Behalf Of Mark Sent: Tuesday, February 24, 2009 5:43 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] WANTED: heliax Chris, I'd use LDF for the long run, and FSJ for jumpers. Also, you'll need a short jumper of RG-213, 9914, or similar at

RE: [Repeater-Builder] WANTED: heliax

Chris, I'd use LDF for the long run, and FSJ for jumpers. Also, you'll need a short jumper of RG-213, 9914, or similar at the antenna end to allow you to rotate the beam(s). I don't think the FSJ is meant to be *THAT* flexible. FWIW - I run 1/2" Heliax to my 2m/70cm stick at the top of my tower

RE: [Repeater-Builder] WANTED: heliax

bject: RE: [Repeater-Builder] WANTED: heliax I really don't like using Superflex (FSJ) outdoors. The jacket on FSJ is much thinner than it is on LDF, making it easier to get water in due to a small nick. Also, the corrugation on FSJ is helical (spiral), whereas LDF is annular ("rings&

RE: [Repeater-Builder] WANTED: heliax

ginal Message- > From: Repeater-Builder@yahoogroups.com > [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chris Curtis > Sent: Tuesday, February 24, 2009 5:13 PM > To: Repeater-Builder@yahoogroups.com > Subject: RE: [Repeater-Builder] WANTED: heliax > > I apprecia

Re: [Repeater-Builder] WANTED: exec II desktop

I have a few, all 100% working, clean. uhf and vhf, 50.00 each, plus shipping. (desk models) Lance N2HBA - Original Message - From: Chris Curtis To: Repeater-Builder@yahoogroups.com Sent: Tuesday, February 24, 2009 2:32 PM Subject: [Repeater-Builder] WANTED: exec II desktop

RE: [Repeater-Builder] WANTED: heliax

bject: Re: [Repeater-Builder] WANTED: heliax For heliax at 'make offer' prices, check the equipment for sale listings on the GNARC.org web page. This is good quality and some have connectors already mounted. Shipping will be a problem Good luck. It is good stuff especially

Re: [Repeater-Builder] WANTED: heliax

For heliax at 'make offer' prices, check the equipment for sale listings on the GNARC.org web page. This is good quality and some have connectors already mounted. Shipping will be a problem Good luck. It is good stuff especially for VHF and UHF 73 Curt W1FSM Chris Curtis wrote: >

Re: [Repeater-Builder] WANTED: heliax

Try this websitehttp://www.surpluscoax.com/ Little differnce in FSJ$ and LDF4 other then slight change in loss value and smaller min. bend radius for the FSJ. Big difference between LDF1 and FSJ4 size and loss figures. -- Doug N3DAB/WPRX486/WPJL709 Chris Curtis wrote: =

[Repeater-Builder] WANTED: heliax

Ok, so I also could use some heliax. Now, I understand fsj is the flexi but is it really that bad to install from antenna to shack? The reason I ask is there is some fsj4 on ebay. No ldf in any considerable length. I was looking at ldf1 but got quoted 1.25 a foot vs 190.00 for 250' of fsj4. Yes

[Repeater-Builder] WANTED: exec II desktop

How goes it everyone? Chris, kb0wlf here. I'm looking for Exec II desktop or wall mount radios. I'd like a vhf-lo, vhf-hi, and a uhf. Preferably, of course, INEXPENSIVE. =] Putting together a system with 6m/2m repeaters and a 70cm "remote base". After reading the "repeater building checklist",

[Repeater-Builder] Wanted: WWVB Antenna for Spectracom Netclock

Not sure if everyone here knows what I'm talking about, but I was given a SpectraCom Netclock/2 time & frequency standard at work, and I need the WWVB "Croquet Mallet" antenna for it. This is an active antenna designed to work with the Spectracom Netclock/2 product. Those in commercial radio shoul

[Repeater-Builder] Wanted: Link Comm RLC-3 Controllers

Anyone have an RLC-3 surplus to their needs for sale? Any configuration... From 1 port to 8 ports. Please e-mail me directly (surf_bo...@yahoo.com) with configuration and asking price. Thanks! Chris

RE: [Repeater-Builder] wanted- macaroni fly back xfmr

@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ted Bleiman K9MDM - MDM Radio Sent: Monday, February 09, 2009 3:07 AM To: repeater-builder@yahoogroups.com; motorola-u...@yahoogroups.com Subject: [Repeater-Builder] wanted- macaroni fly back xfmr hi gang. mdm here. i have a macaroni

[Repeater-Builder] wanted- macaroni fly back xfmr

hi gang. mdm here. i have a macaroni 2955 with a smoked flyback xfmr. repair shop can't find the part. someone must have a spare or a parts chassis somewhere. and help appreciaed greatly. this is a pristine monitor and i'd really like to get it fixed for my shop. thanks mdm ted   thawing out in

RE: [Repeater-Builder] Wanted 2 Meter Preamp

Reply to me direct (off this reflector) if interested. Gary N6LRV _ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Scott Avery Sent: Thursday, January 29, 2009 5:32 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] W

Re: [Repeater-Builder] Wanted 2 Meter Preamp

Call Chip at AngleLinear and be done with it. You'll never regret it Ken At 05:32 PM 1/29/2009, Scott Avery wrote: Hello All, Thanks for all of you that replied to my original email. I already know what I need, and what I need to do. Thanks. However nobody addressed the subject of WANTED. So

[Repeater-Builder] Wanted 2 Meter Preamp

Hello All, Thanks for all of you that replied to my original email. I already know what I need, and what I need to do. Thanks. However nobody addressed the subject of WANTED. So, here it is again WANTED... In Need of to install I am a looking for a preamp to go on the WR6ABD 2 meter repe

RE: [Repeater-Builder] WANTED:222Mhz repeater

I have several sets of Telewave pass/reject duplexers (built from cavities taken from 220 combiners). See http://www.telewave.com/pdf/TWDS-6026.pdf. I don't have the rack-mount brackets however. Also I have Sinclair and Telewave 220 cavities, window filters, isolators, etc. Email direct if inte

RE: [Repeater-Builder] WANTED:222Mhz repeater

-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] WANTED:222Mhz repeater Actually I have one, was just thinking about selling it, nothing fancy, controler, transmitter, recieve,duplexors, antenna. I am actually into it a little heavy though, and would have to go back and look to give you a

Re: [Repeater-Builder] WANTED:222Mhz repeater

Actually I have one, was just thinking about selling it, nothing fancy, controler, transmitter, recieve,duplexors, antenna. I am actually into it a little heavy though, and would have to go back and look to give you a price. I have manuals for everything also. -- Original Message ---

[Repeater-Builder] WANTED:222Mhz repeater

Anyone have one out there? Joe

[Repeater-Builder] Wanted: Connect Systems Inc CD-2

Anybody have a CSI CD-2 they would like to sell? http://www.connectsystems.com/products/specs/CD2_LT2.pdf If so, please drop me a line at n...@qx.net Thanks - Bill

[Repeater-Builder] Wanted to Buy: Any Palomar Telecom equipment

Hi Group, Just checking in to see if anyone out there in repeater land has any old Palomar Telecom equipment they are no longer using that they may want to sell. I am looking for any old controllers, cards, voice boards, back planes, card cages, ANYTHING Palomar Telecom. Even un-built cards or man

[Repeater-Builder] Wanted Vertex VXR-5000 UHF

Looking to purchase a Vertex VXR-5000 UHF in perfect working condition. Please e-mail or simply call: [EMAIL PROTECTED] 518-653-1287

[Repeater-Builder] Wanted 1 single cavity for a Wacom Wp-678

Does anyone have a single cavity for a Wacom WP678 that they would like to sell? If so, please eith e-mail direct or simply call... Len [EMAIL PROTECTED] 518-653-1287

[Repeater-Builder] Wanted : Hamtronics R302 Receiver

Hello to all and thanks for reading. I am looking to buy your unwanted Hamtronics R302 receiver for a 2 meter ham application. Would prefer a working radio, but will consider all, as long as it hasn't been fried by lightning. Please state price and condition in first email. Thanks, Howard

[Repeater-Builder] wanted: KLN6709 141.3Hz 4A reeds

Wanted: Motorola KLN6709 141.3Hz 4A reeds. The more the better. Need 6709s. Have plenty of the others. Have other tones to trade also. Eric KE2D

[Repeater-Builder] Wanted: Motorola Mitrek VHF

I am trying to find a couple of VHF Mitreks for convertion to repeater use and am having difficulty finding them locally. I have checked a few websites with no success, and am looking for suggestions on other websites that might offer these at surplus prices. Any advice appreciated. 73 de W2AFD

[Repeater-Builder] wanted: GE UHF ICOM for FM exciter

Hello All I have acquired a FM exciter board recently without a ICOM on board. Does anybody out there have a ICOM for the UHF FM exciter to sell? I believe the part numbers are: 19A130605G11 5C 19A130605G4 2C Thanks Mark Hagler KK7U Seattle

RE: [Repeater-Builder] Wanted: 2-port controller

Behalf Of kk2ed Sent: Wednesday, September 24, 2008 4:39 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Wanted: 2-port controller I have a need for a cheap 2-port controller for a commercial repeater project. One repeater and one link port. Before I go order a new CAT 200

[Repeater-Builder] Wanted: 2-port controller

I have a need for a cheap 2-port controller for a commercial repeater project. One repeater and one link port. Before I go order a new CAT 200, does anyone on the list have something similar that they're looking to get rid of? Thanks Eric KE2D

Re: [Repeater-Builder] wanted: N-female flange mount crimp connectors

hs smaller on the 213 connectors and it will not fit over two layers. Been there, done that. Any problem with buying RF Connectors from places like hdcom? Bob M. == --- On Thu, 9/11/08, kk2ed <[EMAIL PROTECTED]> wrote: > From: kk2ed <[EMAIL PROTECTED]> > Subject: [Repeat

[Repeater-Builder] wanted: N-female flange mount crimp connectors

I'm working on a few projects and need a number of N female flange mount style connectors, crimp style for RG58/142/400u cable. Similar to those found on the side of MSF5000 cabinets. Amphenol part # 082- 5372. Anyone have any? Have any of you folks recently needed to refresh your shop stock o

[Repeater-Builder] Wanted: Doug Hall RBI

Please e-mail me directly at: [EMAIL PROTECTED] Thanks...

[Repeater-Builder] WANTED: Circulator / Isolator for 146 MHz

Anyone have a 146 MHz circulator/isolator for sale that will handle 70w? Please respond off list. Royce - W3IF

[Repeater-Builder] WANTED: GE MASTR II #PL19D43027262 Power Supply 12VDC & VHF 110W RPT AMP

Hello all: I am looking to buy or trade for (see end of this message) a working GE MASTR II 12VDC power supply ( #PL19D43027262) and a GE MASTR II 110W output REPEATER DUTY vhf RF Amplifier. I have one complete MOTOROLA RT upright 6' 400w VHF Hi-Band repeater system and another complete MOTORO

RE: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

) and run things there . To: Repeater-Builder@yahoogroups.com From: [EMAIL PROTECTED] Date: Fri, 13 Jun 2008 10:07:16 -0700 Subject: Re: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming Thank you all for the advice

Re: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

gt;> > > > <mailto:forsale-swap%40mailman.qth.net><mailto:forsale-swap%40mailman.qth.net><mailto:forsale-swap%40mailman.qth.net>[EMAIL > PROTECTED]; > > >> > > > <mailto:motorola%40mailman.qth.net><mailto:motorola%40mailman.qth.net>&l

Re: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

; > <mailto:forsale-swap%40mailman.qth.net><mailto:forsale-swap%40mailman.qth.net>[EMAIL > PROTECTED]; > >> > <mailto:motorola%40mailman.qth.net><mailto:motorola%40mailman.qth.net>[EMAIL > PROTECTED]; > >> > > >> > <mailto:mot

Re: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

<mailto:forsale-swap%40mailman.qth.net>[EMAIL PROTECTED]; >> <mailto:motorola%40mailman.qth.net>[EMAIL PROTECTED]; >> > >> <mailto:motorola-Radios%40yahoogroups.com>[EMAIL PROTECTED]; >> >> <mailto:Repeater-Builder%40yahoogroups.com>Repeater-Bui

Re: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

ups.com>[EMAIL PROTECTED]; > <mailto:Repeater-Builder%40yahoogroups.com>Repeater-Builder@yahoogroups.com > > From: <mailto:sacramento.cyclist%40gmail.com>[EMAIL PROTECTED] > > Date: Wed, 11 Jun 2008 21:20:24 -0700 > > Subject: [Repeater-Builder] Wanted to buy: Panasonic CF-25 lap

Re: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

[EMAIL PROTECTED]; [EMAIL PROTECTED]; > [EMAIL PROTECTED]; Repeater-Builder@yahoogroups.com > From: [EMAIL PROTECTED] > Date: Wed, 11 Jun 2008 21:20:24 -0700 > Subject: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or > equivalent for radio programmming > > Good evenin

Re: RE: [Repeater-Builder ] Wanted to buy: Panasonic CF-25 laptop  or equival ent for radio programmming

lder@yahoogroups.com >Subject: RE: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or >equivalent for radio programmming > >At 02:53 PM 6/12/2008, Barry C' wrote: > >>Doesn't the machine just need a suitable port and speed ? , the >&

RE: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

At 02:53 PM 6/12/2008, Barry C' wrote: >Doesn't the machine just need a suitable port and speed ? , the >toughbook isn't a must ? <---I use a new generation Athlon based laptop (3800) which I boot directly to DOS and have no problem at all with RSS for the MSF5000 at least. Ken ---

RE: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

Doesn't the machine just need a suitable port and speed ? , the toughbook isn't a must ? To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; Repeater-Builder@yahoogroups.com From: [EMAIL PROTECTED] Date: Wed, 11 Jun 2008 21:20:24 -0700 Subject: [Repeater-Builder] Wan

Re: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

>> Subject says it all. Thought I had one lined up but the >> seller flaked. Need a CF-25 Toughbook or equivalent to program my >> MT-1000 and Spectras. Does it NEED to be a toughbook? I got nice results with DOS programs and the HP 1000CX (a trimmed-down version of the HP200LX).

Re: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

Try Rick with Comcell Communications, 928-279-6251. On 6/11/08, Dennis Wade <[EMAIL PROTECTED]> wrote: > Good evening everyone, > > Subject says it all. Thought I had one lined up but the > seller flaked. Need a CF-25 Toughbook or equivalent to program my > MT-1000 and Spectras. > >

[Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or equivalent for radio programmming

Good evening everyone, Subject says it all. Thought I had one lined up but the seller flaked. Need a CF-25 Toughbook or equivalent to program my MT-1000 and Spectras. Let me know what you've got plus shipping to 95608. Thanks! Dennis -- Dennis L. Wade KG6ZI Carmichael, C

Re: [Repeater-Builder] Wanted, 2 N-male to N-Female jumbers

I very often can find heliax jumpers with N connectors on Ebay. Some with M-M and some M-F. Looked last night and a number of 5 foot cables readily available. Also, one can try: for good deals on heliax and connectors. Not that hard to make jumpe

Re: [Repeater-Builder] Wanted, 2 N-male to N-Female jumbers

provide a picture. Comments? Mel, K6KBE - Original Message From: Chuck Lippmeier <[EMAIL PROTECTED]> To: Repeater-Builder@yahoogroups.com Sent: Tuesday, May 20, 2008 3:44:53 AM Subject: [Repeater-Builder] Wanted, 2 N-male to N-Female jumbers List, At Dayton I saw a pile of n

RE: [Repeater-Builder] Wanted, 2 N-male to N-Female jumbers

Chuck, I have a few, got all at Hamfest, but I want to keep. I see these all the time...at least at the larger fest. I have 15 ft 1/2 heliax and RG214 cables with good N-connectors. Some of the connectors don't look so good to the typical Ham, but that is because they are silver and tarnis

[Repeater-Builder] Wanted, 2 N-male to N-Female jumbers

List, At Dayton I saw a pile of new 4-5 feet long N-male to N-Female low loss jumbers for feedline end jumper connections. At the time I didn't think to pick up a couple. However, now that I'm home I realize my need. My repeater is 900MHz Maxtrac based using a 150W Motorola Cell site amp. Does

Re: [Repeater-Builder] Wanted to buy - MICOR TPN1110B

you need any? thank you John - Original Message - From: w4dg.geo To: Repeater-Builder@yahoogroups.com Sent: Monday, March 24, 2008 7:30 PM Subject: [Repeater-Builder] Wanted to buy - MICOR TPN1110B Wanted to buy - MICOR TPN1110B 12v/25A rack mount PS. Please reply off list

Re: Re: [Repeater-Builder] WANTED: Com-spec TS-64 encoder/decoder

Get the TS64DS which has the dip switch. Cost couple $ more, but worth it. AES also carries them. 73, ron, n9ee/r >From: [EMAIL PROTECTED] >Date: 2008/03/25 Tue PM 04:16:06 CST >To: Repeater-Builder@yahoogroups.com >Subject: Re: [Repeater-Builder] WANTED: Com-spec TS-64 enc

Re: [Repeater-Builder] WANTED: Com-spec TS-64 encoder/decoder

Com-spec has all kinds of them. They will be happy to sell them to you just like they sold one to me. On Tue, 25 Mar 2008 21:21:12 - "w4dg.geo" <[EMAIL PROTECTED]> wrote: > Anyone have a Com-spec TS-64 encoder-decoder module? > I'm looking for a > couple for a on-going project. Contact o

[Repeater-Builder] WANTED: Com-spec TS-64 encoder/decoder

Anyone have a Com-spec TS-64 encoder-decoder module? I'm looking for a couple for a on-going project. Contact off-list with price [EMAIL PROTECTED] . TNX & 73 Dennis - W4DG

  1   2   3   4   >