Guys guys, i have never used a carbide drill or reamer on any golf club
head, never !!that is what cutting oil is for and a drill press
that go's down in speed that goes down to less than 250 RPM.I mean to
tell you a drill press can ruin a drill/ reamer or a club head in nothing
fl
Ed, I Never used .370 reamers, I always used .375 which is only.005 over
the target size of .370. I have never had a problem either using that
size. PLUS I KNOW THAT WHOLESALE TOOL HAS THE .375 IN STOCK. PLUS IF
YOU CAN NOT FIND THE .370 IN A STRAIGHT FLUTE YOU COULD ALWAYS USE A LEFT
HAN
ED, Guy's
What we would do is much the same as you guys did buy added a few other
things like a skins game that we wold give only a haft stroke per hole on
all of the handicapped holes.By a haft stroke I mean like to be fair
for the low handicap players, like I used to play to a 7 hcp, so
Tom, thanks for the input. i never knew plus my ISP is probabily doing the
very samr thing I am presently getting over 100 + spam mailings per day
right now so if you look at it from my point of view it just might be less
mail..
RK
On 5/30/07, TOM FLANAGAN <[EMAIL PROTECTED]> wrote:
Hey RK;
Personally I've always liked GolfWorks. I would rather purchase anything from them over GolfSmith. GW GOOD,, GS bad.
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date: Friday, Febru
Mark I just finished doing what it asked me too but then rhere was noway out so I just closed the post and now I see that NONE Of my info is there. What gives?
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
OK, Lets all clam down, I hate Jane Fonda as much as anybody else "BUT" trying to make connection between Sen. Kerry and her is really a stretch, and I mean a "STREACH". My brother served in WWII, Korea, China, and Vietnam plus Laos and hated Ms. Fonda as much as anybody but still
OK, Lets all clam down, I hate Jane Fonda as much as anybody else "BUT" trying to make connection between Sen. Kerry and her is really a stretch, and I mean a "STREACH". My brother served in WWII, Korea, China, and Vietnam plus Laos and hated Ms. Fonda as much as anybody but still respe
I'm sorry John but I never received your post until after i sent mine, Again i am truely sorry.
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date: Thursday, February 12, 2004 11:04:47
David, Because of your "HUGH" order which of the three girls that are in the back seat of the 1970(s) Oldsmobile Cutlass Convertible do you get to bed??
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EM
WHAT Can not hear you, What did you want???
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date: Wednesday, January 28, 2004 5:26:57 PM
To: Shoptalk
Subject: ShopTalk: No mail me
May I ask "JUST WHO ARE YOU"??? I keep getting messages from you that always require me to open them, which I never do because 1/ I don't know you & 2/ because of all of the virus's that are going around and all of your posts, 100% of them, require me to open them.
RK
KENNEDY
Congrads all around Tom, I have had 3 so far and most likely will stay that way unless by some miracle some brain doc comes up with a cure for CDC. I got my first one in 1976, second one in 1986 and my third one in 1996. So even if I can not play a full 18 holes in 2006 I'm going out ther
Ralph, what I did for my old work bench is take a solid door and use that as my top and a bathroom Vanity for the stand However for my new bench(s) I've taken 2x4x6' long, 18 of them and glued and screwed them together not laying flat but upright,like a meat block that's why I used 18 of the
is your new version of the shaft puller available for sale$$$
- Original Message -
From: Richard Kennedy
To: Spinetalkers Forum ; [EMAIL PROTECTED]
Sent: Tuesday, January 06, 2004 6:45 PM
Subject: ShopTalk: Bill Owens
Would BIl Owens please contact me for info about your Puller status
Would BIl Owens please contact me for info about your Puller status. [EMAIL PROTECTED]
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
Kennedy
golf-equipment
manufacturer's of world class club repair tooling
Here is a short X Mas poem.
The Cremation of Sam McGeeThere are strange things done in the midnight sunBy the men who moil for gold;The Arctic trails have their secret talesThat would make your blood run cold;The Northern Lights have seen queer sights,But the queerest they ever did s
l press set up, my work shop is progressing nicely and it is time to get a drill press and all the things i will need for repairs and custom building. I need everything, reamers,clamps etc. what do you recommend for a good set up, my budget is around $1000.00. thanks - Jim Letourneau
- Or
Al, I think Kitty Hawk is in NC, "THAT'S NORTH GAROLINA" not SC "THAT'S SOUTH CAROLINA". were I now reside.
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date: Thursday, December 18, 2003
The French could never do it on their own, they ALWAYS Needed a replanted person form another country to do what it needed to be done. The French are built funny / backwards, They fight with their feet and make love with their face.
RK
KENNEDY
golf equipment
manufacturer's of
Having not ever used a drill bit on "ANY" clubhead I wouldn't know how to help you. Now since a Ping head uses a tappered shaft tip I would first try the 5/16" - 18 tap then if that stilled failed I would start with a .354 reamer and work my way up to a .373 reamer. Never drill out a ho
Hey Royce / guys. Jay Leno has a motorcycle with a helicopter turbo jet as it's motor, top speed, i really do not believe jay or anybody ever ran it this fast, is 276 MPH. Jay said that the only real problem is the turbo lag when going aroung corners. I guess at 85 MPH a 2 second delay can p
I've been having a problem with popup's and spam so I went to my Road Runner P2P and they gave me this site to go to that helps you clean up your hard drive. www.doxdesk.com
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
K
Grandpa, ig you have not solg the speed reducer yet please contact me by private e-mail as i just might be interested in buying it. If you have a pic please send along with your reply.
TXS
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---
Hey Steve, us REAL men it don't bother us that much. LOL
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date: Sunday, November 16, 2003 10:56:06 PM
To: [EMAIL PROTECTED]
Subject: Re: Sho
MY DINGALING stupid
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date: Sunday, November 16, 2003 1:20:25 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Saving ferrules
You wipe what do
hey fellows to keep it from sliping clean it off, often, with Aceitone. I wipe mine down everytime i use it
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date: Saturday, November 15, 20
READ THE ENTIRE THING
This was an actual obituary published in The Times-Picayune, New Orleans on 10/2/2003.
Word has been received that Gertrude M. Jones, 81, passed away on August 25, 2003, under the loving care of the nursing aides of Heritage
Manor of Mandeville, Louisiana. She was a
As long as you still have ten fingers then it was a good job, I really do not care if the hosel bores came out ok or not that is strictly between you and your customer. I know that may sound a small bit "UNNICE" but the way I feel about it is as long as you are not in the hospital getting s
Just got home from my testing at Emory Clinic in Atlanta Ga and have very good news and very very bad news. First the good news. It is now official I do not nor have i every had Parkinson's Disease. The bad news is the real reason I'm unable to walk and fart at the same time. my late
When I ream B?C I "ALWAYS" run the drill at around 150 RPM< nothing faster ao you'll end up with a very nice looking desk item as like you said "IT"S GOING TO "WELD" the two items together. Someone said WD40 which is a very good thing to use to prevent rust but very unusefull if you use it
Mako, I'm sorry but I lost your address and this is the only way I can relay this info to you.
.355 1177-0365
.377
.339 1154-1770 or 1177-0320
.341
.343 1154-1857
.371 1154-8305
.373 1154-2010
.375 1177-0632
.377 1154 or it could be 1177-2040
.379 .1154-2050
You were right
Jack / All, the main reason that I like the 5" spindle stroke is because with it there is no job that I can not do. Like I was saying in my post if you are reaming out a Titlest 975 that has a 4.5" hosel bore you're going to need to stop the drill press with the reamer at the bottom of it
Me I'm never cruel. I bought my Drill Press from ENCO but right this minute I do not have their Cat. handy so I can't give you the model number, but it's the only drill press that they handle that has the proper speed and a 5" spindle stroke, which is very important to me and my vast amount
Mako please contact me as to you request.
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
Kennedy
golf-equipment
manufacturer's of world class club repair tooling
My "NEW" Drill Press has a low end of 140 rpm and a 5" stroke, paid $275.00 for it. If it lats as long as my first Drill Press, over 25 years, it will be a bargain, somewheres around $12.00 a year or $1.00 per month. Or i could of sold my old unit for around $100.00 making my new unit co
ED, All, It looks OK but I wouldn't buy it for club making reason's, 1/ 200 RPM is the highest slow speed that I would ever buy, again remember you can always go faster but it's hell to try and go slower and 2/ The 2 2/3 spindle stroke will never work on a lot of todays hosel's. My old Dri
HANDSOME DOG Tom have you ever met Al T If my dog looked as bad as Mr. Taylor does I'd shave his butt and teach him how to walk backwards. Hi Al how are you feeling now a adays You old Phart
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipmen
Ton I think that they call that a French Air Raid Shelter Bend over put your head between your legs and kiss your ass good bye.
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date: Wedne
A man goes before a Calif. Judge and says "I would like to have my name changed. The Judge then asked the man what would you like to change to??? The man replied to Arnold Svhwarzenegger.. The Judge then inquired "Why that name my god man what would cause you to change you name to that
No Miko I'm just running a bit late on just about everything plus one other thing happened in the course of getting rid of some SPYWARE that had attacked my machine, I think that is how Lloyd got through, Now I'm not saying he was the one which caused it I had trouble with it long before Lloy
John, all, I've been busy fixing a design change that I had tested my normal 1000 times but I forgot one test and it turned out to be a very bad idea so I guess i'm going to have steel to eat for a while, luck for me a good friend found it for me so all is not lost. I'll bet your all
Arnie, ME NOT LIKE SOME ONE< NEVER HAPPEN, but there are certain animals out there that just need to be kicked ever once in awhile.
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date
ncy differences. The only thing left is out of round and a material thickness difference at the weld that would affect frequency at different positions around the shaft.
llhack
- Original Message -
From: Richard Kennedy
To: [EMAIL PROTECTED];[EMAIL PROTECTED]
Sent: 10/13/03 9:34:11 AM
S
Tom / All, As being a retired Manufacturing Engineer from Ford Motor and having seen the "BUTT" welding process that you are talking about I would like to add my $0.02 worth into the mix. Yes as you have stated that during the "BUTT" welding process there is no way that any foreign particle
Chris, Yes Wholesale Tool does have a web site it's www.wttool.com
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date: Sunday, October 12, 2003 10:45:29 AM
To: [EMAIL PROTECTED]
One more thing about drilling and reaming, if the drill or reamer, dull reamers can "Freeze"up inside a hole, ever freezes up never and ai mean never try and free it by lifting or trying to get the tool out of the hole by lifting. Because what will happen is the tool is now unbalanced and
John, all, I've been busy fixing a design change that I had tested my normal 100 times but I forgot one test and it turned out to be a very bad idea so I guess I'm going to have steel to eat for a while, lucky for me a good friend found it for me so all is not lost. I'll bet your all
Scott, to put it very simply , ALIEN THE HARD SPINE AT 12:00. 12:00 keeps the clubhead toe from drooping. Forget what ever anybody else says, especially Mr. David T.whom is not a clubmaker per se & who knows very little about making/fitting of golfclubs. By his own admission he only ma
Right Mike wrong Al T. You couldn't get women to crowd around him if he was giving away $100.00 bills , which by the way he never paid for yet. Al T. is to women what horse shit is to smell.
RK
KENNEDY
golf equipment
manufacturer's of world class golfclub repair equipment
When I live back in Michigan I bowled three times a week, held a 182 avg and a 7 hcp in golf, The one team I bowled with called ourselves, you must remember that these were all male bowling leagues and that most men's bowling balls were 16#, 80 pounds of Balls.
RK
KENNEDY
gol
Arnie / all, what I do when I want to reuse a ferrule is i made myself a two piece's steel with a hole drilled thru the two pieces of steel at the parting line. I then just use the one that I need, .350 for woods and .280 for irons, and I then just apply a small amount of heat to the shaft
Mark, Since my illness I've tried several different things to make my grips feel better and a larger size seems to fit my bill just nicely. What I did to make the grips feel more consistent is use a 14" long piece of 3/4" "SHRINK TUBING". Rather than trying to build up tape and keep the
Kevil, how about the DVD's, you have for burning, a DVD(+)R and a DVD(-)R Along with the DVD(+)RW and the DVD(-)RW. And that is not only for your DVD Burner it is also for your DVD Player which also must accept the (+) or(-) or like ,my new unit it accepts both the (+) and (-). I just h
Please go to this site and read what's it is all about then if you agree please sign up. www.eff.com
RK
Kennedy
golf-equipment
manufacturer's of world class club repair tooling
I'm still here Scott, Call me at 843 237 9517 We don't go out all that much anymore, because of you know why. Which by the way I feeling a lots better now that I'm exercizing ever day.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Monday, September 08, 2003 10:51:4
trength is improving and tried a 13 1/2 degree PureFit (191g)
and a VIP A, but still couldn't replace the orginal.
It is sure worth a try.
/Ed
Richard Kennedy wrote:
> Hey Bernie, how much would I get with my new 73mph swing speed, that's
> the swing I now get But only after I&#
Hey Bernie, how much would I get with my new 73mph swing speed, that's the swing I now get But only after I'm warmed up for a few holes. Being sick sure is a bitch.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Sunday, September 07, 2003 10:39:53 AM
To: [EMAIL PROT
differently than I do them. I like my
>way but dammit! Even after 4 decades there are ways to do this stuff I
>hadn't thought of. I like the "tips."
>
>A lot of guys have opinions as to what works best and what doesn't. There's
>no reason to insult them.
>
&g
Guy's there has been more print, E-Mail, on this subject that there has been on on the Iraq war on TV.How about taking any further discussion off line. In other words Enough is Enough. TY
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Friday, August 29, 2003 1
Pat You and your wife, compaion, lover, girl friend, will be more than welcome at my shop and my home. Right this minute I can not tell you but if you have the new 3" clamp you do have the lastest and greatest . If not bring it along anyways and well make it one hows that offer.
RK
That is very true Frank, In fact I gave one away, I had to have one when I lived in the Detroit area because I had a Bridgeport. But I figure now WHY bother when I can get the machine I want with the equipment on it that I need Why got to the bother of a phase converter??? Plus with a ph
Don, how did you know that I was an atendee THanks for reminding me.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Saturday, August 23, 2003 7:51:12 PM
To: [EMAIL PROTECTED]
Subject: ShopTalk: Nanoscience of Club Making
This may apply to Clubmakers :0)
*
I know that I was getting mine twice but I think I'm OK now, Personally I think that YaHoo is at fault, At least I sure hope so.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Saturday, August 23, 2003 7:28:40 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Stuff you
Not a bad price if it truly is in the condition that he says it's in . The only reason I would not buy it is because it's 220 volts 3 phase. Can't do 3 phase
All of my machines are single phase.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Saturday, August 23,
Disregard this copy copy, don't ask me why just do it If your confused think how I feel
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Saturday, August 23, 2003 12:08:20 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: ShopTalk: Golf Clubmaking Software ??
Disregard other copy of this post.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Saturday, August 23, 2003 12:07:10 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: ShopTalk: Golf Clubmaking Software ??
I wonder just who is putting out this piece of crap?
I wonder just who is putting out this piece of crap??? And at what cost??? If I were starting any business today i would first hack with the Small Business Administration on how to start up a business, any business. Or just pick our collective brains from this forum, which is most likel
Arnie, you got that right I only have a 7hp / 80 gal compressor but there a times I wish I had a little larger one of course so does Marion.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Saturday, August 23, 2003 10:50:06 AM
To: [EMAIL PROTECTED]
Subject: Re: ShopTal
Right now in my sop I have a room full of Harbor Freight Stuff. . Lets start with my milling machine, it's a 3hp with a 9" x 49 table tht has a 12" x 37" travel, A one shot lub system, harden and ground ways on both the "X" . "Y" , & :"Z" axies it has a 5" spindle travel ead tilts 90* in bot
Right on Arnie. One, being a Retired Manufacturing Engineer I know / knew a lot of those places. The one I would cross off of that list though is
Kitt, their prices are way over board. Like my new "JET" lathe, they wanted $6750 plus S&H for it when I bought it from a company in OR. stat
Another thing you can use to clean up those BeCu heads is a Coke Cola, Just put the Coke Cola in a pail and put the clubs init overnite and out come nice and bright and shinny.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Thursday, August 21, 2003 9:18:45 PM
To: [E
Charlie, just for the hell of it i get about 90% of my tools from Wholesale Tool. They have about 5 to 6 stores thru out the mid west and along the atlantic coast line, NC, TEX, Fla, Mass, IND, and their main store is in MICH, other that hem i use ENCO< use-enco.com. where do you live ch
Yeah They DO
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Thursday, August 14, 2003 11:18:20 AM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Hireko stuff^%%$) News
In a message dated 8/14/2003 8:08:11 AM Eastern Daylight Time, "Robert Manvell" <[EMAIL PROTECTED]
Sorry guys / gals wrong fourm.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Wednesday, August 20, 2003 1:40:44 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: ShopTalk: Loft & lie question
I was told by just every brain doc I've seen that there is appro
Now I must pay Sales Tax, Bah Hum Bug
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Wednesday, August 20, 2003 3:21:39 PM
To: [EMAIL PROTECTED]
Subject: ShopTalk: SA2000
I just received a letter from David & Terri with SA200. They have moved and are located in Sou
I was told by just every brain doc I've seen that there is approx. 143 different strains of PD and 3 of them, PSP being one, will kill you.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Wednesday, August 20, 2003 1:16:56 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk
Arnie, very well put, very well. Most people forget that in other sports the guy(s) are complaining about everything but their playing. But there is always one player that stands head and shoulders above most of the rest of the pack and in my opinion it's Tiger & Michael Jordan.
RK
Hey Arnie could I say that the shaft that he used was extracted from the head with my puller.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Monday, August 18, 2003 9:04:53 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Congratulations
I would vote for you Arnie, b
The Cleveland Clubmaker , if you wish to call him that so be it, still makes, now I understand that the younger clubmakers will not understand just what the hell I'm talking about, but this guy still makes "WOOD WOOD's. No I'm not talking about Metal woods I'm talking about drivers made from
AS a side note Len / all When WE lived in The Detroit area we had a gas refrig. Which if our elecrtic went out our staeks never thawed. Hell our Marion's Relatives, my inlaws, would bring their meats and other stuff over. Mu brother-in-law was a butcher at A&P's talk about chowing down.
JUST remember after you have turned and polished the ferrule put a small amount of acetone on a clean rag and gently wipe the ferrule.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Saturday, August 16, 2003 1:34:57 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: 42"
Royce, you can get any length, any width and any grit that you wish. Just got to your local, it's a lots better than trying to explain it over the phone to some sales clerk that in all likely hood does not know what the hell you really want. Or you can call Norton and one of their sales c
As I recall about the spring of 2001 a "MAJOR" Clubmaker, rumored to be TM,had approx. 10K of new designed Ti heads made in China. They then submitted them to the USGA as required. But the USGA in their hurry to hit "US Home Shop Clubmakers" with illegal head that they never got around to
Well just got home from Atlanta and the Emory Health Clinic where I was given a lot of good news, I do Not Have Parkinson's Disease. But they, now when I say They I'm talking about two of their best brain Doc's and their Assistants Now these two are not your run of the mill Brain Doc T
Hey Arnie, the kid wouldn't just happen to be your offspring would he That is just about the way I led my life. I quit school in the 9 th grade mainly because I thought that I needed more of a challenge then what I was getting, that was long before the school systems, back in Al T court,
Tom, I stand right behind you on this issue. But where were you & I when the Japanese's did the very same thing to our TV industry. I don't know what you were doing but I sure know what I was doing, sitting around in sunny Southern Calif watching a 13" Japanese's TV. It was nice, smal
Jack , now your clubs are talking to you, my brain doc has a few open times . If you want I'll make and appointment for you???
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Friday, August 01, 2003 9:31:51 AM
To: [EMAIL PROTECTED]
Subject: RE: ShopTalk: Driver for t
Hey Mickey Al's making fun of you again.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Wednesday, July 30, 2003 4:47:44 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Was LDC; is, real life
Well a couple of items arise. First of all, owning the Dell, and needing s
ALL, when I retired form Ford Motor They hired 2 MBA's to do the work that I was doing.,now i'm not bragging on my self i'm just trying to show what our people are going through. when they hired these two new MBA's they got them real cheap. When I retired in 1993 i was making about 80K wit
come on now who are you gw.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Tuesday, July 29, 2003 6:24:14 PM
To: [EMAIL PROTECTED]
Subject: RE: ShopTalk: Was LDC; is, real life
Hey you guys,
I enjoy your posts about golf clubs because you know what you are talking
sounds a lot like the work of the "WTO".
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Tuesday, July 29, 2003 7:39:25 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Was LDC; is, real life
- Original Message -
From: Kevil, L H.
To: [EMAIL PROTECTED]
S
but Tom he can land a jet fighter on an aircraft carrier. And I going to be the next president.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Tuesday, July 29, 2003 6:06:52 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Was LDC; is, real life
- Original M
Thanks Tom.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Tuesday, July 29, 2003 11:50:33 AM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Was LDC; is, real life
I've been reading the vitriol a lot of you good folks have been trading re;Sam's Club, Wal-Mart, et.al
hey AlT your not cheap you are thrifty and cheap.last time AlT even saw Pom Perignon.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Monday, July 28, 2003 11:45:35 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: RE: shoptalk: Epoxy for LDC Pro's
Dang it. The '93 Dom
Hey Al, just what in the hell is the "BIG DAVE trying to pull now. You know it sure is funny but since I blocked The BIG DAVE from my inbox I hear from just about most clubmakers on his latest asinine answers every time someone asks a question and I post an answer to that person's question t
THANK YOU ARNIE THANK YOU
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Sunday, July 27, 2003 4:34:24 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Question re: Epoxy in Shaft (Was: Epoxy for LDC Pro's)
Simple answer to this problem is filling the shaft tip wit
OH Yeah I forgot a couple of other things, If Al T. ever gets an idea he treats it kindly because it's in a strange place. I still can not believe you agree with Al "CUB" just can not friggen believe it. I mean "CUB" the guy lives in Cleveland, you know Cleveland the only city in the "W
THAT'S IT CUB, Al T has never had original though in his little head in his entire life I mean, god, every time he bends his elbow his mouth opens.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Friday, July 25, 2003 10:31:30 PM
To: [EMAIL PROTECTED]
Subject: Re: Sh
Tom that is just about the time you call your friendly HelicArc man. i was going to buy one when I retired and I should have because down even the best clubmaker w/in the Myrtle Beach area don't know what a HelicArc welder is or just what it can do.
RK
---Original Message---
F
1 - 100 of 286 matches
Mail list logo
