I shudda known ;-)
Al
At 11:42 PM 3/29/2004, you wrote:
Are those US or Imperial
gallons?
Al Taylor wrote:
Oh Yeah? Well my car still
takes about 20 gallons of gas for a full tank.
Al
2:19 PM 3/29/2004, you wrote:
At 10:26 AM 3/29/2004, you
wrote:
since a liter is 1000 ml does it
not follow 1 c
Are those US or Imperial gallons?
Al Taylor wrote:
Oh Yeah? Well
my car still takes about 20 gallons of gas for a full tank.
Al
2:19 PM 3/29/2004, you wrote:
At 10:26 AM 3/29/2004, you wrote:
since a liter is 1000 ml does it not follow 1
cm =10 ml.
(10cm x 10cm x 10cm = 10
In a message dated 3/29/04 11:00:57 PM Eastern Standard Time, [EMAIL PROTECTED] writes:
Arnie, I can't believe that you don't measure how many cc's, ml's or forgive me, ounces of solution that you use! How do you ever expect to pass your golf science volumetric efficiency test? :>) Frank
Gimm
In a message dated 3/29/2004 2:01:06 PM Eastern Standard Time, [EMAIL PROTECTED] writes:
I just squirt 2-4 trigger pulls of solvent from my old "needle gun" through a broken off needle. I have no idea of the volume of solvent I use
Arnie, I can't believe that you don't measure how many cc's, m
]
Subject: Re: ShopTalk: Grips and compressed air
A CC (cubic Centimeter), is 10 ml (ten Milli-Liters)
In simple terms, what I first said (mistakenly) was to use about a
tablespoon or more of solvent, which is way more than I meant to say.
Just a half a teaspoon is enough.
If one uses too much, it
Oh Yeah? Well my car still takes about 20 gallons of gas for a full tank.
Al
2:19 PM 3/29/2004, you wrote:
At 10:26 AM 3/29/2004, you wrote:
since a liter is 1000 ml does it not follow 1 cm =10 ml.
(10cm x 10cm x 10cm = 1000ml)
By definition, 1 liter = 1 cubic decimeter (10cm x 10cm x 10cm = 1
In a message dated 3/28/04 11:40:56 PM Eastern Standard Time, [EMAIL PROTECTED] writes:
If one uses too much, it doesn't harm anything, except, that the extra
will spray out from the grip, and "all over the place", maybe even into
your eyes.
This is why I drape a rag over the mouth of the gr
At 10:26 AM 3/29/2004, you wrote:
since a liter is 1000 ml does it not follow 1 cm =10 ml.
(10cm x 10cm x 10cm = 1000ml)
By definition, 1 liter = 1 cubic decimeter (10cm x 10cm x 10cm = 1000cm³)
Also by definition, 1 liter = 1000 ml.
So:
1000cm³ = 1000ml
Therefore:
1cm³ = 1ml
QED
sea
I read this note 3 times before I saw why Jim posted it...
At 08:35 AM 3/29/2004, Jim wrote:
I am probably wrong, but I think a centimeter is a linear measure and cubic
centimeter and milliliter are measures of volume.
I think Jim said this because I wrote:
> The Twelfth General Conference on Wei
since a liter is 1000 ml does it not follow 1 cm =10 ml.
(10cm x 10cm x 10cm = 1000ml)
sean weijand
On Sunday, March 28, 2004, at 09:16 PM, Burgess Howell wrote:
The Twelfth General Conference on Weights and Measures has defined a
liter to be a cubic decimeter (10cm x 10cm x 10cm).
Therefor
I am probably wrong, but I think a centimeter is a linear measure and cubic
centimeter and milliliter are measures of volume.
Jim
- Original Message -
From: "Burgess Howell" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, March 28, 2004 11:16 PM
Subject: R
The Twelfth General Conference on Weights and Measures has defined a liter
to be a cubic decimeter (10cm x 10cm x 10cm).
Therefore, 1cm = 1 ml.
Previously, a liter was defined to be 1.28 cubic decimeter. For all
practical purposes, then, a cc (correctly, cm³) has always equaled a
millilit
A CC (cubic Centimeter), is 10 ml (ten Milli-Liters)
In simple terms, what I first said (mistakenly) was to use about a
tablespoon or more of solvent, which is way more than I meant to say.
Just a half a teaspoon is enough.
If one uses too much, it doesn't harm anything, except, that the extra
>
> >- Original Message -
> >From: "comgolf" <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Sent: Tuesday, March 23, 2004 2:58 PM
> >Subject: Re: ShopTalk: Grips and compressed air
> >
> >
> > > Hi TFlan:
> > > What grip loosen solvent do you use..??
> > >
> > > John
Naptha...Camping fuel Same stuff!
Regards,
Ron
uesday, March 23, 2004 2:58 PM
Subject: Re: ShopTalk: Grips and compressed air
> Hi TFlan:
> What grip loosen solvent do you use..??
>
> John
works for me. Not a lot of odor, dries fast and it doesn't hurt the grips.
So far no problems at all.
TFlan
- Original Message -
From: "Jeremy Ingle" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, March 24, 2004 5:49 AM
Subject: Re: ShopTalk: Grips
compressed air
Just for the record what is the difference between cc's and ml's ?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Another Happy Linux User
Sent: Wednesday, March 24, 2004 12:51 AM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk:
ECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, March 23, 2004 2:58 PM
> Subject: Re: ShopTalk: Grips and compressed air
>
> > Hi TFlan:
> > What grip loosen solvent do you use..??
> >
> > John
Just for the record what is the difference between cc's and ml's ?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Another Happy Linux User
Sent: Wednesday, March 24, 2004 12:51 AM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Grips and comp
Nice arnie,
One could also refer to the entry in the resource page, of my own
original submission for this method (I added the use of solvent, to the
blowing process). There is one tiny error in my writeup, - I said to
use 3 or so CC's of solvent, when in fact I meant 3 or so ml's of it.
Chee
Camping fuel. Generic Coleman from Wal-Mart or KMart.
TFlan
- Original Message -
From: "comgolf" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 23, 2004 2:58 PM
Subject: Re: ShopTalk: Grips and compressed air
> Hi TFlan:
> What gr
Hi TFlan:
What grip loosen solvent do you use..??
John
- Original Message -
From: "tflan" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 23, 2004 4:14 PM
Subject: Re: ShopTalk: Grips and compressed air
> Geez!
>
> 1998? Wow! I guess
;Ed Reeder" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 23, 2004 10:13 AM
Subject: Re: ShopTalk: Grips and compressed air
> TFlan,
> You lie! It was actually back in April of 1998 :-)
>
> One of your many contributions to this forum.
>
> The onl
using this method.
TFlan
BTW: Believe it or don't, but a towel wrapped around the grip works as
well as most other compressed air methods.
- Original Message -
*From:* [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
*To:* [EMAIL PROTECTED] <mailto:[EMAIL PRO
well as most other compressed air methods.
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, March 22, 2004 9:32
AM
Subject: Re: ShopTalk: Grips and
compressed air
In a message dated 3/21/04 6:56:37 PM Eastern
Standard Time, [EMAIL PROTECTE
In a message dated 3/21/04 6:56:37 PM Eastern Standard Time, [EMAIL PROTECTED] writes:
(1) The GolfPride Tour Wrap Midsize went on fine, but the last 2" at the
butt never gripped the shaft properly. I was still able to twist it back
and forth in that section more than 6 hours afterwards. So I b
In a message dated 3/21/2004 3:56:37 PM Pacific Standard Time, [EMAIL PROTECTED] writes:
Arnie,
You da man!!!
Normally, I just cut grips off. Almost everybody does. Makes sense too;
there's too much hassle in trying to save the grip. Occasionally, I'll blow
one off that I really want to save, u
Arnie,
You da man!!!
Normally, I just cut grips off. Almost everybody does. Makes sense too;
there's too much hassle in trying to save the grip. Occasionally, I'll blow
one off that I really want to save, using a bicycle pump; I'm good for
about 3 out of 4 when I do that.
But yesterday I had a
29 matches
Mail list logo
