Thanx M.
James Osbourne Holmes
a...@trail.com
-Original Message-
From: Marshall Dudley [SMTP:mdud...@execonn.com]
Sent: Thursday, April 06, 2000 1:44 PM
To: silver-list@eskimo.com
Subject:Re: CS>TDS1 & PWT
Generally it should increase the conductance. This shou
- Original Message -
From: James Osbourne, Holmes
To:
Sent: Thursday, April 06, 2000 7:46 AM
Subject: RE: CS>TDS1 & PWT
> Hi Steve and all,
>
> High Density Poly Ethylene; HDPE is said to put nothing in the water. I
> wrote Nalgene about their resin's surface char
om]
> Sent: Thursday, April 06, 2000 9:02 AM
> To: silver-list@eskimo.com
> Subject:Re: CS>TDS1 & PWT
>
> HDPE is permiable to gases in the air, including CO2. That is the only
> "problem" I know about it. I posted the actual numbers here earli
]
Sent: Thursday, April 06, 2000 9:02 AM
To: silver-list@eskimo.com
Subject:Re: CS>TDS1 & PWT
HDPE is permiable to gases in the air, including CO2. That is the only
"problem" I know about it. I posted the actual numbers here earlier, but seem
to be unable to find the
Stephen Quinto wrote:
> To reply to your request, Steve, for developing visual standards for testing
> size or strength you've just asked the impossible.
>
> The only way to determine size is to visually measure the particles (or
> chunks) of silver in calibrated visualizing equipment such as
10:20 AM
Subject: Re: CS>TDS1 & PWT
> Thanks for your wonderfully helpful posts, Bob. I wade through all the
> off-topic posts looking for your post and others who are doing some hard
> research on this topic.
>
> By the way can you and/or other experts develop some sort
20C and 50C.
>
> James Osbourne Holmes
> a...@trail.com
>
> -Original Message-
> From: Steve Geigle [SMTP:sgei...@home.com]
> Sent: Thursday, April 06, 2000 8:21 AM
> To: SILVER-LIST
> Subject:Re: CS>TDS1 & PWT
>
> Thanks for your won
es Osbourne Holmes
a...@trail.com
-Original Message-
From: Steve Geigle [SMTP:sgei...@home.com]
Sent: Thursday, April 06, 2000 8:21 AM
To: SILVER-LIST
Subject:Re: CS>TDS1 & PWT
Thanks for your wonderfully helpful posts, Bob. I wade through all the
off-topic post
Thanks for your wonderfully helpful posts, Bob. I wade through all the
off-topic posts looking for your post and others who are doing some hard
research on this topic.
By the way can you and/or other experts develop some sort of standard for
visually determining the size of colloids or strength
Hi Ya'all,
Just a note on reviewing one of my many development samples of CS, made
on 8/12/99 which had a ppm = 41, and was colorless.
The following tabulation I believe will lay at rest the idea that an
electrical meter can measure ppm !!
8/29/99; 41 pp; 47 uS
9/14/99; 52 ppm; N.A.
11
you an
idea of your actual ppm if you get it checked by other means and
correlate the two measurements *and* you keep your process exactly
the same.
Be well,
Mike D.
> Hi!
>
> I'm curious about the 25 calibration samples that Hanna sells for
> their TDS1 pocket meter. The s
Hi!
I'm curious about the 25 calibration samples that Hanna sells for
their TDS1 pocket meter. The samples cost as much as the meter! Since
the meter comes calibrated, couldn't you just keep a known sample of
CS to calibrate back to when necessary? Is the concentration of CS
stable e
A higher ppm on a 2 hour batch of silver than on a 12 hour batch?
>> DId you do something else different?
>> Sparrow
>> >My tds1 came today and after calibrating checked out my CS.
>> >
>> >HVAC 2 hour batch - 26 ppm. clear, light tyndall
>> >HVAC dri
ferent?
>
> Sparrow
>
> >My tds1 came today and after calibrating checked out my CS.
> >
> >HVAC 2 hour batch - 26 ppm. clear, light tyndall
> >HVAC drip 2 minute batch 3 ppm. clear, very light tyndall
> >LVDC 12 hour batch 6 ppm, yellow, very strong tyndall
>
12 hour batch?
> DId you do something else different?
> Sparrow
>> My tds1 came today and after calibrating checked out my CS.
>> HVAC 2 hour batch - 26 ppm. clear, light tyndall
>> HVAC drip 2 minute batch 3 ppm. clear, very light tyndall
>> LVDC 12 hour batch 6 ppm,
Sparrow;
Like I said you canget any ppm you want with a TDS1.
Robert
Scharbach wrote:
> A higher ppm on a 2 hour batch of silver than on a 12 hour batch?
> DId you do something else different?
>
> Sparrow
>
> >My tds1 came today and after calibrating checked out my CS.
>
A higher ppm on a 2 hour batch of silver than on a 12 hour batch?
DId you do something else different?
Sparrow
>My tds1 came today and after calibrating checked out my CS.
>
>HVAC 2 hour batch - 26 ppm. clear, light tyndall
>HVAC drip 2 minute batch 3 ppm. clear, very light tynd
My tds1 came today and after calibrating checked out my CS.
HVAC 2 hour batch - 26 ppm. clear, light tyndall
HVAC drip 2 minute batch 3 ppm. clear, very light tyndall
LVDC 12 hour batch 6 ppm, yellow, very strong tyndall
LVDC 2 hour batch, 12 ppm clear, good (distinct) tyndall
If I remember
thanks list ...Problem solved...
--
Peace and Health to you and may the White Light protect you
Barbara and Brian in OZ
VK5KBW
http://www.senet.com.au/~brains/intro.htm
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or si
G'day list ...a question .. I asked some one in the states to get a
TDS1 for me ...where is the best place to get it . Hanna does not
show them on their web site ...
--
Peace and Health to you and may the White Light protect you
Barbara and Brian in OZ
VK5KBW
ionsTDS1...
Date: Thursday, May 28, 1998 12:18PM
Hey Ginny,
Can you tell me where and how much to get this device and which one I
need to ask for??? Thanks, Debbie
Zeigler, Virginia A. x1969 wrote:
>
> Thank you, Raul & Jim, for your Info. on the TDS1 tester. I just
talked
> to
Raul Vergini, MD wrote:
The TDS1 (now discontinued) has a "resolution"
> of 10ppm.
The TDS-1 has a resolution of * 1ppm * as per the spec sheet. :-)
Bless youBob Lee
--
oozing on the muggy shore of the gulf coast
l...@fbtc.net
--
The silver-list is a modera
John McLean wrote:
>
> --
> > From: jein...@troi.csw.net
> > To: silver-list@eskimo.com
> > Subject: Re: FW: More technical questionsTDS1...
> > Date: Thursday, 28 May 1998 4:27
> >
>
> >
> > Ginny,
> > Sounds
Thank you, Raul & Jim, for your Info. on the TDS1 tester. I just talked
to Hanna Instruments and was instructed to send my unit back and they
will replace it with the newer model that has the proper resolution for
our purposes. Hurrah!
Ginny
--
From: Raul Vergini, MD
To: silver-
>
> John: Try this phone number 03 9769 0666
>
> Dean
>
Thanks Dean
John
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com
John: Try this phone number 03 9769 0666
Dean
-Original Message-
From: John McLean [mailto:hastb...@nor.com.au]
Sent: Thursday, May 28, 1998 12:00 AM
To: silver-list@eskimo.com
Subject:Re: FW: More technical questionsTDS1...
--
> From: jein...@troi.csw.
I think that the problem is in the model (you can check at the Hanna home
page: www.hannainst.com ). The TDS1 (now discontinued) has a "resolution"
of 10ppm. The new model is the DIST-WP1 that has a resolution of 1 ppm.
In the Hanna home page you can find also a list of the distributo
--
> From: jein...@troi.csw.net
> To: silver-list@eskimo.com
> Subject: Re: FW: More technical questionsTDS1...
> Date: Thursday, 28 May 1998 4:27
>
>
> Ginny,
> Sounds like you may have a defective unit. The TDS1 I have has 3
> numbers on it.
> From: "Zeigler, Virginia A. x1969"
> To:"'Silver user's newsgroup'"
> Subject: FW: More technical questionsTDS1...
> Date: Wed, 27 May 1998 08:24:00 -0400
> Reply-to: silver-list@eskimo.com
> Hi
Zeigler, Virginia A. x1969 wrote:
>
> Hi, Bruce & All!
> We also have purchased and are using the TDS1 from Hanna Instruments.
> We haven't yet figured out how you can get readings as "fine tuned" as
> 23 ppm or 13 ppm. Our readings go from "0" to &qu
Hi, Bruce & All!
We also have purchased and are using the TDS1 from Hanna Instruments.
We haven't yet figured out how you can get readings as "fine tuned" as
23 ppm or 13 ppm. Our readings go from "0" to "1" to "2" without
anything in between. Wh
Thanks list received several mails about the TDS1 and Hanna
..with an url to Hanna I find they have a branch here in OZ so I
have emailed them already and will await their reply with baited breath
... who knows what may happen
--
Brian in OZ
VK5KBW
http://www.senet.com.au
G'day list now can someone tell me or confirm the brandname of the
TDS1 is it HAINA or something like that ...
--
Brian in OZ
VK5KBW
http://www.senet.com.au/~brains/intro.htm
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-li
33 matches
Mail list logo
