David and Jan Takle mentioned on 16-1-2010 0:58:
> running the nova emulator
> I cannot seem to get any terminal control codes to work (cursor
> up/down/left/right; cursor addressing; char insert/del; etc)
> I've tried setting Dasher emulation and sending Dasher codes.
> I've tried setting ANSI e
Patrick Finnegan mentioned on 14-1-2010 20:23:
> On Wednesday 13 January 2010, John Welsh wrote:
>
>> Thanks Jason,
>>
>> The ini file that I have shown below was correct.
>> I was attempting to boot a VMS7.3 vdisk ! ( VAX780 last
>> supported VMS Version was V6.2). I built a f
David and Jan Takle mentioned on 27-1-2010 6:51:
> Using Nova emulator.
> Can someone tell me what Telnet client to use and how to configure it?
> Here are the commands I am using to start RDOS
>
> ATTACH DKP0 rdos_d31.dsk
> SET CONSOLE DASHER
> SET CONSOLE TELNET=2000
> BOOT DKP
>
> Then I start
Johnny Eriksson mentioned on 18-4-2010 16:59:
>> So I have a really nicely-running PDP-11 now with remote access via telnet
>> through a DZ-11 device fully working. I can log in remotely on up to 8
>> simultaneous connections (only one DZ-11 set up for now) and have everybody
>> working at the sa
Richard mentioned on 2-9-2010 18:13:
In article<4c7fcadd.90...@bandsman.co.uk>,
Nigel Horne writes:
I have experience with sourceforge; I'm willing to offer my time and
help as an admin on the project's sourceforge area if needed.
Personally I'd be happy to see it migrate away from so
Toby Thain mentioned on 2-9-2010 18:25:
On 2-Sep-10, at 12:18 PM, Wilm Boerhout wrote:
Richard mentioned on 2-9-2010 18:13:
In article<4c7fcadd.90...@bandsman.co.uk>,
Nigel Horne writes:
I have experience with sourceforge; I'm willing to offer my time and
help as an a
Nathan Cutler mentioned on 30-9-2010 9:13:
Has anyone tried a USB keypad like this one?
*
http://tinyurl.com/2u6gcxv*
It has the requisite physical keys, anyway, so theoretically it's just
a matter of xev and xmodmap, right?
___
Simh mailing lis
Peter Allan mentioned on 29-1-2011 15:01:
Brian, thanks for your advise. Changing the value of RTIME has indeed
got VMS 4.6 to boot on my emulated VAX 780, which is terrific.
I started by setting RTIME to 1000, as suggested and I decreased the
value until the system no longer booted. The smal
Christian Gauger-Cosgrove mentioned on 3-6-2011 19:22:
Hello fellow SIMH users:
I'm having an odd issue running RSTS/E under the PDP-11 emulator. I'm
using the current version, with the interim corrections added. When I
have the '11 running with the VH or DZ devices, if a connection drops
and a
Christian Gauger-Cosgrove mentioned on 7-6-2011 16:36:
Hello again everyone;
First I'll start by responding to some of the responses I have received:
Mr. Pizzolato:
I attempted setting the line settings in RSTS/E. I found it works
using the command "SET TERMINAL:/PERMANENT/DIALUP" and
because
Patrick Renouvel mentioned on 16-9-2011 10:15:
Hi all,
I did that with no problems in the past.
I have a Charon VAX Container.
I can boot without troubles with Charon.
With SimH i have the message :
KA655X-B V5.3, VMB 2.7
Performing normal system tests.
40..39..38..37..36..35..34..33..32..
Patrick Renouvel mentioned on 16-9-2011 10:15:
Hi all,
I did that with no problems in the past.
I have a Charon VAX Container.
I can boot without troubles with Charon.
With SimH i have the message :
KA655X-B V5.3, VMB 2.7
Performing normal system tests.
40..39..38..37..36..35..34..33..32..
Bob Supnik mentioned on 3-5-2012 21:42:
Two-plus years in the making! Hundreds of bug fixes! Tens of
improvements! Yes, it's the long-awaited V3.9-0 of SimH. Available, as
always, at http://simh.trailing-edge.com.
Some extra goodies this time, as SimH will be transitioning from this
form of
Arpadffy Zoltan mentioned on 8-5-2012 9:47:
Hello,
Do you have a list of tasks that need to be done in order to have it usable?
There is a huge need for a free Alpha emulator that really works well without
limitations, expensive licences or obligatory Windows environment.
Thank you.
Regards
On my new Raspberry Pi 2 (quadcore ARM), Simh 3.9-0 from the
trailing-edge repository gives me 3 VUPs.
That is, three times more powerful than the original VAX-11/780.
On a somewhat smaller footprint.
Details: Raspbian OS, fully updated/upgraded
Linux raspberrypi 3.18.7-v7+ #755 SMP PREEMPT Thu
Paul Hardy 2 schreef op 27-1-2016 om 18:11:
Robert Thomas said
Have you investigated using eXcursion? It was provided with VMS/OpenVMS
distributions on the Pathworks CD.
...
Sounds interesting, but as a hobbyist, how can I get hold of the Pathworks CD,
or a download of the eXcursion component
DUA1 (the one, not the letter L)
Op zaterdag 6 februari 2016 heeft Gregg Levine het
volgende geschreven:
> Hello!
> Okay here goes, I'm following these instructions:
> https://www.netbsd.org/ports/vax/emulator-howto.html
>
> And I'm getting this response:
> MicroVAX 3900 simulator V4.0-0 Beta
In the early 80's, I worked on my first PDP-11/44 with RSTS, initially
as a programmer. The system manager had a few DECtape reels that could
play music when loaded and sped forward. The Dutch national anthem was
one of the hits. This was a military research facility, and every time
some high-r
For ftp, you need to load licenses for VAX and UCX first. Catch-22.
There are two ways to load the initial set of licenses. I have used them
both.
1. Start simh, boot your VAX, connect to the VAX OPA0 console terminal,
start a EDIT /TPU session and paste from your host terminal.
2. The Micr
For ftp, you need to load licenses for VAX and UCX first. Catch-22.
There are two ways to load the initial set of licenses. I have used them
both.
1. Start simh, boot your VAX, connect to the VAX OPA0 console terminal,
start a EDIT /TPU session and paste from your host terminal.
2. The Micr
Exactly. The only thing that simh adds to this process is the "set cr
reset" command to prompt the card reader (driver?).
So on simh, the flow control would be:
1. get your "card deck" in a file on the host
2. boot simh with the cr device attached to said file
3. boot your VAX
4. log in, then C
Please check out my post on running a VAXcluster on Raspberry Pi's
https://www.linkedin.com/pulse/vaxcluster-raspberry-pi-wilm-boerhout
/Wilm
___
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
Will Senn schreef op 15-2-2016 om 14:26
[snip]
Are you documenting the setup process for your endeavors, or just
blogging about the result? I think it would be interesting to see how
you clustered those Pi Vaxen as much as to know it was possible. I've
got a few Pi around looking for somethin
Zachary Kline schreef op 15-2-2016 om 14:38:
Hi,
I’m trying to boot
http://bitsavers.trailing-edge.com/bits/DEC/vax/vms/BB-D782B-BE__VMS_V1.5_1600.zip,
mostly for interest’s sake. I presume this is an installation tape of some
sort.
I’ve tried on the VaxSserver 3900 simulator, but always seem
Will Senn schreef op 15-2-2016 om 15:09:
[snip]
As soon as I get home again (may be in a few days), I can post the
simh ini file(s), my /etc/rc.local which implements the tun/tap
stuff, as well as VMS MODPARAMS.DAT. That is as far as I will go in
documenting. Making it work and stumbling along
Will Senn schreef op 15-2-2016 om 15:09:
Thanks. I look forward to seeing the .ini's and rc.local, etc. I come
at it the other way around. I know Linux/Mac OS X/FreeBSD quite well,
but know next to nothing about VMS (I know a bit about VAX because of
its relationship to PDP-11, which I've been
William Pechter schreef op 15-2-2016 om 15:54:
[snip]
Having installed 2.x back in the day -- IIRC you would need to get a
VMS machine running with DSC (disk save and compress)
running on it and use that to restore the system. It might be
possible to build bootable DSC on an RL pack
on a diff
This summer, I plan to visit the Computer History Museum in Mountain
View, CA.
The idea is mainly to drool on PDP's and VAXes of course. Do any of you
know of some not-on-the-regular-menu stuff I could ask for (maybe in
advance) to enhance my experience?
/Wilm
___
Paul Koning schreef op 15-2-2016 om 16:15:
[snip]
There are three parts to a successful setup:
1. Since each Pi has only one Ethernet interface, make sure you use a
wired connection (wireless isn't real Ethernet)
Well, Wireless is 802.11 which indeed isn't 802.3 / Ethernet. But that's not
What he said :-)
Op ma 15 feb. 2016 om 20:47 schreef Thomas Merritt
>
> > On Feb 15, 2016, at 8:37 AM, Johnny Billquist wrote:
> >
> > On 2016-02-15 16:15, Paul Koning wrote:
> >>
> >>> On Feb 15, 2016, at 9:01 AM, Wilm Boerhout
> wrote:
> &
What error? What versipn of simh?
Op ma 15 feb. 2016 om 20:53 schreef Bill Cunningham
>
>
> - Original Message -
> *From:* Wilm Boerhout
> *To:* simh@trailing-edge.com
> *Sent:* Monday, February 15, 2016 3:42 AM
> *Subject:* Re: [Simh] vax simh and loading file
Zane Healy schreef op 15-2-2016 om 18:20:
[snip]
There are plenty of good VAX and VMS manuals out there, including the
documentation set. Check eBay and abebooks.com.
The last version of VMS that will run on a VAX is v7.3.
Zane
More precisely, V7.3 will run on *any* VAX, including the prima
Zane Healy schreef op 15-2-2016 om 18:23:
[snip]
It looks like a good replacement for my VAXstation 3100, but not such
a great one for the VAXstation 4000/60. OTOH, the reduced power,
size, and noise make this an attractive idea. I’ve been meaning to
try the original for emulating a PDP-10 a
Below, as promised, some crucial files that I used to bring up my
PiCluster. YMMV.
You could meke all Pi's and VAXen in the cluster identical, just
changing node names and network (MAC,DECnet,IP) addresses.
/Wilm
= Raspbina wheezy/jessie /etc/rc.local =
#!/bin/sh -e
# This script is e
Ethan Dicks schreef op 16-2-2016 om 08:18:
On Tue, Feb 16, 2016 at 1:57 AM, Wilm Boerhout wrote:
More precisely, V7.3 will run on *any* VAX, including the primal VAX-11/780.
This level of backwards compatibility is unique.
I'm sure 7.3 has a very broad list of what it runs on
Several people have asked me on and off the list about the VAX-11/780
model case that is shown in one of my posts.
Althought it is not -as I believed earlier- one of a kind, the origins
are unknown to me. It is an aluminum profile at the core, the panels are
covered with pre-printed adhesive.
Johnny Billquist schreef op 16-2-2016 om 12:49:
No, it is not. Talk to IBM about S/360... :-)
And there are some VAXen on which V7.3 will definitely not run. How
about rtVAX for example.
I stand corrected. Please note that I had a marketing job once. It sticks...
li...@openmailbox.org schreef op 29-2-2016 om 07:21:
On Sat, 27 Feb 2016 17:32:19 -0500
Paul Koning wrote:
Decimal did show up at times even into the 1960s, for example in the IBM
1620. But it never made all that much sense; converting between binary
and decimal is quite easy even in those ve
How does a real MicroVAX II preserve its time across boots?
How is this implemented in simh MicroVAX II? i.e. what virtual device
should I attach to a file so that the time is preserved in VMS?
My configuration (below) does not preserve the time (VMS V7.3 fully patched)
Thanks,
/Wilm
--- simh
ox is also in that chip.
-- R
Den 2016-04-11 kl. 14:33, skrev Wilm Boerhout:
How does a real MicroVAX II preserve its time across boots?
How is this implemented in simh MicroVAX II? i.e. what virtual device
should I attach to a file so that the time is preserved in VMS?
My configuration (below
ystem time.
Once a year or so, you have to issue a “$ SET TIME” command in VMS
with no parameters to cause VMS to rewrite the base time stamp in the
OS file.
The next reboot should not prompt for system time.
Dave
*From:*Simh [mailto:simh-boun...@trailing-edge.com] *On Behalf Of
*Wilm Boer
Mark Pizzolato schreef op 11-4-2016 om 18:53:
1)confirm that you’re using recent code from the master branch of the
github repo: https://github.com/simh/simh
downloaded and built on March 26.
2)Provide the output produced while building your simulator
I did not save this. Build was "Uneve
Trying to outsmart AUTOGEN and CLUSTER_CONFIG is never a good idea.
After the disk image transfer, you are no longer running a 6220, but a
3900. After the disk image transfer and first (minimal) boot, you should
AUTOGEN and, as you found out, NETCONFIG. Then your cluster boot master
should be O
tic information out of the VAX
4000-300 when it tries to do a network boot?
Thanks,
Daniel
*From:* Simh on behalf of Wilm
Boerhout
*Sent:* Tuesday, June 21, 2016 1:42 AM
*To:* simh@trailing-edge.com
*Subject:* Re: [
eXcursion for Windows is not free. It was licensed as part of the
Pathworks Client License. But -apart from me, obviously- knows that
nowadays? And who is alive to hunt license violations. Still...
*
**/Wilm*
Robert Thomas schreef op 14-11-2016 om 15:34:
We serve X-Windows from SIMH VAX runni
gérard Calliet schreef op 19-1-2017 om 21:25:
Hello,
I use simh to emulate a VAX. It seems I have a strange issue.
I have a process which use a huge number of logical names. So it uses
memory. With a physical VAX of 128m it was difficult but possible.
I use the same system disk (upgraded from
https://www.linkedin.com/pulse/mixed-architecture-openvms-cluster-wilm-boerhout
The LAVC cluster is still running today, and will survive individual
systems missing (even the one voting member) when I upgrade Raspbian OS
and/or SIMH itself.
/Wilm
___
Johnny Billquist schreef op 11-3-2017 om 13:09:
On 2017-03-11 11:58, Wilm Boerhout wrote:
Paul Koning schreef op 9-3-2017 om 23:59:
On Mar 9, 2017, at 12:15 PM, Mark Pizzolato wrote:
On Wednesday, March 8, 2017 at 11:50 PM, Johnny Billquist wrote:
...
When Matt Burke initially was working
Gary Lee Phillips schreef op 17-3-2017 om 16:54:
Ethan Dicks mailto:ethan.di...@gmail.com>> wrote:
>That's earlier than is possible... the model was introduced in Jan,
>1986. Don't know date of first ship.
Well I did say "around 1985 or so." After 30+ years, I'd say that was
a pretty close gu
Paul Koning schreef op 17-3-2017 om 17:05:
[snip]
More in general, if drive B wont' read tapes written by drive A, the fault could be at
either end (or both). It could even be in the standard -- all too many standards, for
example a whole lot of modern network protocol standards, permit implem
I brought up the VMS V4.7 + VWS 3.2 software as per Tony's recent
instructions.
It is running quite nicely on my Windows10/MinGW laptop. DEClander
brings back sweet memories :-)
However, I'm struggling with keyboard mapping in the Workstation
environment. The VWS software only lmows about VT
I don't know what happened. Below is the complete message/question.
Wilm Boerhout schreef op 21-3-2017 om 09:34:
I brought up the VMS V4.7 + VWS 3.2 software as per Tony's recent
instructions.
It is running quite nicely on my Windows10/Cygwin laptop. DEClander
brings back swee
Does The compiler generate simh code that causes alignment faults when simh
executies? A notorious source of bad performance on early Itanium ports.
/Wilm
Op ma 24 apr. 2017 om 14:22 schreef gérard Calliet <
gerard.call...@pia-sofer.fr>
> Hello,
>
> I have a VAX emulated with simh compiled and ru
John Forecast schreef op 17-10-2017 om 22:27:
[Snip]
I don’t think you’ll be able to get early versions of VMS running on
SIMH. A lot (almost all?) of the utilities run in PDP-11 compatibility
mode which, as far as I can see, is not supported by the 11/780 emulator.
[Snip]
I beg to differ.
Luca Sironi schreef op 18-10-2017 om 10:36:
2017-10-17 23:42 GMT+03:00 Wilm Boerhout <mailto:wboerh...@gmail.com>>:
See also my blog on
https://vxcompany.com/2016/02/13/a-working-vax-11780-revisited/
<https://vxcompany.com/2016/02/13/a-working-vax-11780-rev
Matt Burke schreef op 17-10-2017 om 23:17:
You may also want to try VAX/VMS 1.0 (or as close as you can get to it):
http://www.9track.net/vms/BB-D782A-BE.zip
This is not taken from an original tape. It's something I reconstructed
from a disk containing early VAX/VMS source and binaries. The dat
Gregg Levine schreef op 18-10-2017 om 15:39:
Hello!
Matt I just tried to visit that location. It worked the first time.
And then going to the portion for the DECUS spot I get a complaint
from my browser. And then trying to log in anonymously, it rejected
it. Finally going back to that link it pro
Matt Burke schreef op 17-10-2017 om 23:17:
You may also want to try VAX/VMS 1.0 (or as close as you can get to it):
http://www.9track.net/vms/BB-D782A-BE.zip
This is not taken from an original tape. It's something I reconstructed
from a disk containing early VAX/VMS source and binaries. The dat
alone backup on a disk image, I need DSC to read the VMS
1.5 tape (don't I?) which is the only reason that I was trying to get
VMS 3.0 working in the first place.
Cheers
Peter Allan
On 20 October 2017 at 09:43, Wilm Boerhout <mailto:wboerh...@gmail.com>> wrote:
Matt Bur
I have no idea why my messages appear truncated on the list.
Or do they?
I'm using Thunderbird Mail agent to compose and send them. Anyone have
an idea?
*Wilm*
___
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/li
Paul Koning schreef op 25-10-2017 om 15:00:
On Oct 25, 2017, at 8:40 AM, Wilm Boerhout wrote:
I have no idea why my messages appear truncated on the list.
Or do they?
They look complete to me.
paul
Thanks. They sometime appear trunctaed when I look at it with
Thunderbird mail
on?
> >
> > Cheers
> >
> > Peter Allan
> >
> >
> > On 25 October 2017 at 14:08, Peter Allan
> > wrote:
> >
> > > Thanks Wilm, I will try that out. I doubt I would have thought of
> > > using a TS11 rather than a TE16 without
And it is DSC2, not VMS Backup that is used for the restore, since V1.x
distros were in that format.
/Wilm
Johnny Billquist schreef op 6-11-2017 om 01:19:
On 2017-11-06 00:39, Paul Koning wrote:
On Nov 5, 2017, at 5:48 PM, Johnny Billquist wrote:
Ah.
That sound like a simh problem. The
Jeremy Begg schreef op 13-11-2017 om 11:03:
Hi,
I am trying to get SIMH up and running on the ethernet interface of a
Raspberry Pi 3. I have followed the intructions in 0readme_ethernet.txt,
installing the libpcap-dev, bridge-utils and uml-utilities packages before
building SIMH itself. I just
Jeremy Begg schreef op 13-11-2017 om 13:38:
Hi Wilm,
Thank you for the prompt reply.
On 13 Nov 2017, at 9:43 PM, Wilm Boerhout wrote:
Jeremy Begg schreef op 13-11-2017 om 11:03:
Hi,
I am trying to get SIMH up and running on the ethernet interface of a
Raspberry Pi 3. I have followed the
.
Regards,
Jeremy Begg
On 13 Nov 2017, at 11:13 PM, Wilm Boerhout <mailto:wboerh...@gmail.com>> wrote:
Jeremy Begg schreef op 13-11-2017 om 13:38:
Hi Wilm,
Thank you for the prompt reply.
On 13 Nov 2017, at 9:43 PM, Wilm Boerhout wrote:
Jeremy Begg schreef op 13-11-2017 om 11:03
paulhar...@btinternet.com schreef op 13-11-2017 om 15:33:
A couple of points:
1) The ?53 self test error might be a red herring – I intermittently
get ?53 2 errors on both Windows (Intel) and Raspbian (pi 3) when
starting the VAX emulation under SIMH. I think it is something to do
with the c
I am about to become the owner of a VAXmate. This set (disk images) would
be very useful to me!
/Wilm
2017-11-18 0:51 GMT+01:00 Larry Baker :
> Al,
>
> I have the following collection of manuals and floppies for DECnet-DOS and
> PATHWORKS for DOS, if they are of any use to you. Otherwise, I'll
Wilm Boerhout schreef op 18-11-2017 om 10:54:
I am about to become the owner of a VAXmate. This set (disk images)
would be very useful to me!
[snip]
I *have* become the owner of a VAXmate, with expansion box (RD32 disk).
I also have downloaded Volume I of the Technical Reference Manual from
Raspberry Pi. One to run simh behind my router/firewall, another one to
provide an OpenVPN server for access from the outside. You cannot get more
(performance) for less (money/power)
Op za 2 dec. 2017 om 01:48 schreef Jordi Guillaumes Pons <
j...@jordi.guillaumes.name>
>
> On 1 Dec 2017, at 21:47
Clem Cole schreef op 25-3-2018 om 23:23:
A small suggestion... while you can probably get the 780 to
recognize and support a TU58, booting from it may be difficult (I did
not find it mentioned in any SDP or other doc). The 780 family has a
dedicated PDP-11 with RX floppy drives that runs as
Please remove the illegal software — what Tim said.
/Wilm
Op di 31 jul. 2018 om 14:58 schreef Timothe Litt
> The code that was posted is inappropriate, and should be removed from the
> list archives.
>
> VMS has not been abandoned, and this group is not in the business of
> stealing IP.
>
> Ther
I found a TK50 cartridge with label
-- AQ-GL5AC-DN MF1603 MVII DIAG CUST TK50
Copyright 1985 Digital Equipment Corp. --
and thought it might be useful to someone in the community.
It appears to have been stored adequately. I am now looking for a
I'm trying to get my head around VAXELN and system time.
Before I cry "Wolf" and accuse any innocent program(mer) of instruction
obstruction, I want to know how things are supposed to work here (i.e.
as on a real rtVAX with VAXELN)
I have built a VAXELN system image and can download this into
Johnny Billquist schreef op 25-10-2018 om 22:44:
On 2018-10-25 22:11, Johnny Billquist wrote:
On 2018-10-24 15:58, Wilm Boerhout wrote:
I found a TK50 cartridge with label
-- AQ-GL5AC-DN MF1603 MVII DIAG CUST TK50
Copyright 1985 Digital Equipment Corp
Mark Pizzolato schreef op 15-12-2018 om 19:10:
Hi Wilm,
On Saturday, December 15, 2018 at 3:45 AM, Wilm Boerhout wrote:
I'm trying to get my head around VAXELN and system time.
Before I cry "Wolf" and accuse any innocent program(mer) of instruction
obstruction, I want to know
Mark Pizzolato schreef op 15-12-2018 om 21:42:
On Saturday, December 15, 2018 at 12:09 PM, Wilm Boerhout wrote:
[...]
DBG(1041144)> CLK REG: todr_rd(ROM) - TODR=0xC3AA5B84
This line ^^^ and all above it are done by the MicroVAX 3900 boot
ROM and have nothing to do with ELN.
DBG(7056
The few actual reads of the TODR during ELN's execution are returning low
values (since nothing actually set the clock yet).
Do you get the same result if you don't attach the CLK device?
If the result is the same, then it would seem that ELN doesn't care to use the
hardware clock for much o
Bob Supnik schreef op 15-12-2018 om 23:44:
[snip]
So I'd like to see what the behavior is the clock file
attached.
Or you can post a pointer to the disk image you're using, and I'll try
it on 3.10. I saw the ELN kits on 9track.net, but I don't know which
one to use.
/Bob
Files are
Johnny Billquist schreef op 15-12-2018 om 14:11:
[snip]
I have finally been able to investigate the tape I acquired, and am
sorry to say that the tape broke after the first load. I opened up the
cartridge, and apart from the break about a foot from the leader, a
section in the middle looks "cr
Bob Supnik schreef op 17-12-2018 om 02:06:
Sorry I wasn't clear. If you want me to investigate this, I need the
MicroVAX 3900 environment you mentioned. I didn't write the MicroVAX
II or rtVAX simulators. I prefer to work with my own code and in my
own environment (3.10).
Instead, you can jus
Brian schreef op 17-12-2018 om 14:28
[snip]
I really don't want to have to enter all the licence data
interactively, or fix a couple of thousand line endings in the editor!
There must be SOME way of getting the file onto a new setup?
Thanks for any assistance,
Brian.
What usually works for m
rich...@richard-harper.me.uk schreef op 28-1-2019 om 09:59:
Hi,
I have managed to obtain a raw disc image for one of the SIMH
emulators. This is a bootable disc apparently. I can attach the
disc but when I boot nothing happens.
No error message from simh? Please provide the log.
Digging
Hi Rich, answering like this is fine.
You appear to be using the “legacy” version of simh that is no longer
maintained by the current simh support group.
Please download V4.0 from github and build the nova emulator on your host
platform.
Then retry and report. The current simh version has extend
Yes. Assuming your first iso is attached in the ini file and mounted in
VMS, the sequence is:
$ dismount dua3: /unload
ctrl/E to halt the emulator and stop VAX processing
simh> detach rq3
simh> attach -e rq3 yourfile.iso
simh> continue
$ mount dua3 yourlabel
Op do 31 jan. 2019 om 03:37 schreef S
Hittner, David T [US] (MS) schreef op 6-3-2019 om 19:46:
So from a performance analysis perspective, what are the VUPS ratings of the
VS4000-90 and the SIMH VAX running on the RX2800?
That's (more or less) the Integer performance rating.
David
According to www.vaxmacro.de/vvcc.html , the VAX
Hittner, David T [US] (MS) schreef op 6-3-2019 om 19:46:
So from a performance analysis perspective, what are the VUPS ratings
of the VS4000-90 and the SIMH VAX running on the RX2800?
That's (more or less) the Integer performance rating.
David
There never was a single CPU VAX with a 89 VUPs ra
Ray Jewhurst schreef op 13-4-2019 om 02:53:
I have seen articles everywhere setting a VAXCluster using SimH and
Raspberry Pis but none with Linux desktops. I am putting together a
small network of 3 or four Linux machines and thought it would be kind
of neat to put together a small cluster and
I believe the 1,2 password is “system” on a virgin system.
Op wo 9 okt. 2019 om 22:24 schreef Peter Allan
> While I have been playing with running VMS on simulated VAXen, and RT-11
> and RSX-11M(+) on simulated PDP11s for many years, I have never tried RSTS
> on a PDP11 - until now.
>
> I have f
cd into the dir (simh) that holds the makefile and rerun the make cmd
/wilm
Op zo 20 okt. 2019 om 22:15 schreef Bob Vines
> Mark, et al.,
>
> I've installed termux and successfully(?) run the first two commands that
> you listed, but when I try to run "make pdp8" (without the quotes) I get
> ma
I think you made the worst choice for your attach command: wifi is not
ethernet, contrary to popular belief. Can you post results when your attach
to a real ethernet device ?
Wilm
Op zo 31 mei 2020 om 17:37 schreef Phil J FIsher <
phil.fis...@peejayeff.co.uk>
> All
> Following Mark P's feedback
Hittner, David T [US] (MS) schreef op 1-7-2020 om 17:17:
Why not use PuTTY for the VT terminal emulator, which is known to work
with SIMH?
What is the point of trying to use MAME for VT emulation?
*From:*Simh *On Behalf Of *Peter Allan
*Sent:* Wednesday, July 1, 2020 9:34 AM
*To:* Simh Trai
Johnny Billquist schreef op 3-7-2020 om 13:24:
On 2020-07-03 13:19, Johnny Billquist wrote:
On 2020-07-03 13:14, Lars Brinkhoff wrote:
Johnny Billquist wrote:
I am not at all sure I agree with that... I think you too should look
at the VT100 technical manual and see how soft scrolling is done,
93 matches
Mail list logo