We have installed SIPxecs 4.0.1 and polycom phones are 320/330 with fimware
bootROM 3.2.3 and 4.1.2, I do not understand why the phone when is going to
reregister they stay in the air though they have 3600 seconds which is the
default time.
Thanks,
Hi Keith,
I had the same problem some time ago with a Patton 4638(Firmware 5.3)
and Snom 360. I had to update the Snom 360 firmware to 7.3.23. At the
SIP settings of the identity I had to set the Server Type Support
field to Nortel. Before I set this the re-invite behavior of the snom
was very
On Mon, 2009-08-31 at 01:43 -0400, Bernardo Ortega wrote:
Hi,
We have installed SIPxecs 4.0.1 with AudioCode M1000, the problem is
with the call transfers with autoattendant only work when the user is
assigned a DID, when DID remove the call is not transferred via
autoattendant rings until
On Mon, 2009-08-31 at 02:05 -0400, Bernardo Ortega wrote:
We have installed SIPxecs 4.0.1 and polycom phones are 320/330 with
fimware bootROM 3.2.3 and 4.1.2, I do not understand why the phone
when is going to reregister they stay in the air though they have 3600
seconds which is the default
Perhaps I should post this to the developers list, but I'll post here
and see what I get
I have some users who are frustrated that their ring and background
preferences are being reverted to factory defaults every time there is a
major bootrom/firmware update and the file system gets wiped,
Mike,
You should probably have a look at the tracker
(http://track.sipfoundry.org). Not only does it track bugs but also,
feature requests and, basically, provides a roadmap for the project.
In the tracker you can vote for the features that you would like to see
implemented as well as
I am desperately looking for an answer for this...Any help is most
appreciated...
We are trying to put together a remote office office solution with SIPX located
at a main location and SIP clients located at the remote locations.
Each remote location is going to have an Audiocodes Mediant 1K
Hmmm. It seems that even though mac-address-phone.cfg is not defined
as one of the config files in mac-address.cfg the phone will download
and apply it anyway. I just got through doing a file system format and
all my personal settings came back when it was all finished. I guess it
turns out I
Hi,
i see that right now when i install sipxces it sets change pg_hba.conf:
host all all 127.0.0.1/32 trust
local all all trust
I don't like this way and i want to use a user in postgresql that will
use a password and sipxecs will access postgresql using this user.
Where do i need to set this
I've posted a couple of times asking about this but without replies. I suspect
I need to ask this somewhere else. Can someone suggest where I should be asking
such questions of folks that would be knowledgeable about these things.
Thanks.
Mike
Post#1
Don't suppose there is a way of using
Hmmm. It seems that even though mac-address-phone.cfg is not defined
as one of the config files in mac-address.cfg the phone will download
and apply it anyway. I just got through doing a file system format and
all my personal settings came back when it was all finished. I guess it
turns out
Thanks, I'll take a peek at that and see if I can make a suggestion.
In the meantime, I'm still interested in hearing from anyone who might have
done something along these lines, shared data, or some other method for fail
over, etc.
Mike
On Mon, 31 Aug 2009 09:34:56 -0400, Paul Herron wrote:
On Sun, 2009-08-30 at 21:24 -0500, li...@grounded.net wrote:
I've posted a couple of times asking about this but without replies. I
suspect I need to ask this somewhere else. Can someone suggest where I
should be asking such questions of folks that would be knowledgeable
about these things.
I
I didn't realize that's what you were trying to tell me in the previous
post. Thanks!!
Huijun Yang wrote:
Hmmm. It seems that even though mac-address-phone.cfg is not defined
as one of the config files in mac-address.cfg the phone will download
and apply it anyway. I just got
I suspect that the problem is that no one else has attempted what you're
trying to do.
That's why I wondered if there might be a better place to ask about that.
Thanks for the tip on using SOAP too.
Mike
___
sipx-users mailing list
an...@iguanait.com wrote:
Hi,
i see that right now when i install sipxces it sets change pg_hba.conf:
host all all 127.0.0.1/32 trust
local all all trust
I don't like this way and i want to use a user in postgresql that will
use a password and sipxecs will access postgresql using this
I don't know if this has been answered yet, but on the polycom config
files we used to 'chmod +666' the files for the phones to be able to
upload to them. Basically, make the files r/w. Standard security
cautions apply...
-Original Message-
From: sipx-users-boun...@list.sipfoundry.org
I would think to make something like this work the Polycom phones need
to be routed through the Audiocodes in some manner... maybe you are
supposed to set the Audiocodes as an outbound sip proxy?
Mike
From: sipx-users-boun...@list.sipfoundry.org
On Mon, 2009-08-31 at 13:02 -0400, Picher, Michael wrote:
I don't know if this has been answered yet, but on the polycom config
files we used to 'chmod +666' the files for the phones to be able to
upload to them. Basically, make the files r/w. Standard security
cautions apply...
(picture
Hi Arda,
Have you seen this article?
http://sipx-wiki.calivia.com/index.php/HowTo_configure_AudioCodes_Stand-
Alone_Survivability_Feature
-Paul
paul.moss...@nortel.com
From: sipx-users-boun...@list.sipfoundry.org
No these phones do not use the Unified SIP package. The 79x1 series have a
different SIP and SCCP package than the 79x0 phones.
There config files are completely different also. They are the CiscoPlus
phones. NAT is not working and I don't see anything on the net to get it
working other than
Version:
sipXconfig (4.0.1-015823 2009-06-19T07:16:14 ecs-centos5)
Phones:
Polycom 500/501 , Polycom 650/670 + Sidecar , Polycom 430
Firmware:
spip_ssip_3_1_0RevB_release sig.zip
BootROM:
spip_ssip_BootROM_4_1_2_release_sig.zip
Issue:
We just completed installing version 4.0
22 matches
Mail list logo