Raphael
Thanks but my manual doesn't tell me what off/1/2/3
actually does for me in this mode, can you enlighten me ??
Thanks
Chris
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 21, 2003 8:30 AM
Subject: AW: AW: [RCSE] New USA
10 seconds? You need to be closer to 5 to be competitive. I lucked out at
our last contest when a turbulent thermal pinged me off at 2 seconds.
Fortunately, I rode the same thermal out for a 9:56, my personal best!
-Original Message-
From: tony estep [mailto:[EMAIL PROTECTED]
Sent:
LAST CHANCE for a NIB vintage Legionair 140. Bet there arent many of these left! With
a beefed up spar Im told these will compete with the Bubble Dancers, etc.
Dont really care if I sell it or not, but if someone
makes me a good enough offer I would part with it. If I still have it unsold by this
Walter,
You are right, not many left, but of what I have seen of Ray Hayes'
Legionaire kits and new fuse from a mold is my idea of how to build one now
with carbon tube spars amd no aluminum anywhere.. Just FYI, one Legionaire
sold at Mid South, for $200
Marc
- Original Message -
Am flying a Ruby with 6 servos. One aileron alternates by either:
1) not working
2) working wrong (going the wrong direction)
3) working correctly
All of the above happens w/o any tweeking of the setup. I am running
a tried and true setup. I have replaced servo extensions - no
change. I may
The Rocky Mountain Soaring Association is hosting the
US Team Selections over Labor Day Weekend August 30 -
Sept. 1. In order to encourage the volunteer help
necessary to make this event successful we are
arranging a raffle limited to event volunteers. While
there will be a variety of prizes,
For participant information:
As of this afternoon, according to Lisa at AMA she had
recorded only about 13 entrys for this event. I was
quite surprised that at this late date the numbers
were so low. According to the entry form,
registration must be completed/postmarked by August 1,
2003 about
Noted a problem like that on my formter Thermal Eagle. Sent the Rcvr in to be checked
as sometimes the flaps worked or not and then the problem would switch to the
ailerons, with just one of them working or not working. Discovered the Rcvr was bad
and got it replaced (fast from Hitech) and
Hi
Chris,
in
setmode 5 , you can change the sensibility of the interference
detection
off =
no detection, 6 highest sensibility.
with
JR-rx I normaly use setting 3.
you
can check on the ground how much your servos may jitter,
before
the
voice will tell you attention.
Thommy
The Sky Bench Legionair 140 will be available in 4-6 weeks, the 132 and 100
will be available 2-3 weeks after the 140. Then I will have a 2m version
too. The first 140 kit goes to Jack Womack. No aluminum will be used,
carbon instead. Pricing not available yet, email me to be put on the
- Original Message -
From: Larry
Taylor
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, July 22, 2003 4:23 PM
Subject: Re: Visalia CVRC 30th Fall Soaring Festival Entry
Forms
Hi Paul!
Several people have had trouble getting the
entry form. It appears that you have
I manufacture one of the EPP ODR kits the Foam-one. Getting the wing stiff
has been the biggest effort. The first year I raced the wind would flex 4
in the turn. I have gone through about 5 versions sence then and finally
ended up using a full span carbon spar on one side and a half span spar on
I just got my first hotmail abuse
message.
To those who use hotmail.
Please make sure you are not the one one causing
this.
Mike
Its obvious you have a bad signal wire connection on that servo. When its touching the servo works, when it isn't the servo is still powered and goes the wrong way...or doesn't move at all. Its unlikely the servo has a problem, very likely you have a cold solder joint in your harness or just a
I just had something like this happen. It turned out to be a broken servo
gear.
Rense Lange
[Original Message]
From: suter1998 [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: 7/22/2003 11:50:08 AM
Subject: [RCSE] Crazy servo behavior - need advice.
Am flying a Ruby with 6 servos. One
Who sells gear sets for Air 141 servos?
Bob Rice
Rocky Mountain Soaring Assn.
Denver CO USA
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format
16 matches
Mail list logo