Re: [RCSE] Looking for a Futaba Ch 40 module

On Wed, Aug 27, 2008 at 09:49:21AM -0400, Ed Anderson wrote: | All that I have read is that the synth modules use more power than the | single channel modules. Perhaps the Futaba Synth is different. Any way, | for the cost of one 2.4 GHz receiver, I can keep all my 72 MHz stuff flying | on thei

Re: [RCSE] Looking for a Futaba Ch 40 module

ne" <[EMAIL PROTECTED]> Cc: "Ed Anderson" <[EMAIL PROTECTED]>; "Soaring Exchange" ; <[EMAIL PROTECTED]> Sent: Wednesday, August 27, 2008 9:19 AM Subject: Re: [RCSE] Looking for a Futaba Ch 40 module Ed, I forgot to mention that the transmitter will

Re: [RCSE] Looking for a Futaba Ch 40 module

Ed, I forgot to mention that the transmitter will use LES power with the synth module and you won't see any difference with your receiver. Its the servos that drain the receiver battery. Anker Anker Berg-Sonne wrote: Ed, Forget about a 72MHZ module. Contact Horizon Hobbies or your local h

Re: [RCSE] Looking for a Futaba Ch 40 module

Anderson - Original Message - From: "Anker Berg-Sonne" <[EMAIL PROTECTED]> To: "Anker Berg-Sonne" <[EMAIL PROTECTED]> Cc: "Ed Anderson" <[EMAIL PROTECTED]>; "Soaring Exchange" ; <[EMAIL PROTECTED]> Sent: Wednesday, August 27, 20

Re: [RCSE] Looking for a Futaba Ch 40 module

MAIL PROTECTED]> Cc: "Soaring Exchange" ; <[EMAIL PROTECTED]> Sent: Wednesday, August 27, 2008 9:15 AM Subject: Re: [RCSE] Looking for a Futaba Ch 40 module > Ed, > > Forget about a 72MHZ module. Contact Horizon Hobbies or your local hooby > shop and get a 2.4 GHZ

Re: [RCSE] Looking for a Futaba Ch 40 module

Ed, Forget about a 72MHZ module. Contact Horizon Hobbies or your local hooby shop and get a 2.4 GHZ transmitter module AND a 7000 full range receiver for just $110. I just installed this in one of my radios and my decond Supra fude and it works like a champ! Anker Ed Anderson wrote: Most o

[RCSE] Looking for a Futaba Ch 40 module

Most of my planes are on a Futaba 9C super on channel 40. Seems my Ch 40 module is getting a bit flakey. Anyone got one cheap they want to get rid of? If not, I will probably get the synth module to replace it, but I prefer the single channel modules. They use a lot less power. Best regards, Ed

[RCSE] Looking for Stylus 50 model memory card

Any one have an extra they wish to part with for a reasonable price? Contact me off line, Tom [EMAIL PROTECTED]

[RCSE] Looking for 50' Hosemonster Tubing - Unlimited Size

Mark is out of town this month and I'd like to get my hands on some Hosemonster Tubing - 50' / Unlimited. Anyone have some laying around they'd sell me? Blayne Chastain RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] P

[RCSE] Looking for a Sharon 3.7 Pro X-tail... anyone want to sell their birds?

Looking for another back up plane, does anyone have a Sharon 3.7 Pro X-tail for sale, looking for either NIB or RTF. Please let me know what you have and pictures would make me pull the trigger faster on a deal with YOU!!! Thanks Edgar "The Soaring Junkie" RCSE-List facilities provide

Re: [RCSE] Looking for Stylus tx modules on 54

John: Stylus PCM-FM Tx module Part No.93072 Available from us..$89.95 ea rgds, Alberto www.hobbyclub.com Phone (949)425-1362 -Original Message- >From: John Hayes <[EMAIL PROTECTED]> >Sent: Jun 27, 2008 4:44 AM >To: soaring@airage.com >Subject: [RCSE] Looking for

[RCSE] Looking for Dr. Dan, can you ping me back!!!!

Dan, can you ping me back? Thanks in advance, Edgar "The Soaring Junkie" RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIM

[RCSE] Looking for Nats Roomate

Hey guys... Going to the nats this year! Just booked a room at the Super 8 - they like a few of the hotels have an AMA rate. I'll be checking in Sunday, July 27th and checking out Saturday, August 2nd. The room is nonsmoking with 2 beds. They do have wireless high-speed internet. Tota

[RCSE] Looking for someone not on RCSE

3.7 Sharon Pro V-Tail fuse, new or used but not broken. Also if other parts are available will consider. Or a complete 3.7 Sharon Pro (V-Tail) with or without radio. Regards, Dave Corven. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [E

Re: [RCSE] Looking for a Nats roomie

Great Roomies can be hard to find. Reminds me of the time I shared a hotel room with Phil Lontz, the infamous Bozo himself in Southern.Cal. No particularly funny stories came out of that experience (except for that crazy bathroom faucet that I won't describe). But I did learn a lot and as a res

[RCSE] Looking for a Nats roomie

I have a room at the Fairfield for the full winch launched and electric sailplane Nats and am looking for someone to share the cost with. Let me know if you are interested off line at [EMAIL PROTECTED] My normal roomie backed out for personal reasons and is not going this year. -- Jack Iafret H

[RCSE] "Looking for a Pike Superior fuse, doesn't have to be Perfect"

My JW yellow fuse took a pretty bad hit today in Cincy, so looking for a replacement. Gordy 502 727 9595 cell **Wondering what's for Dinner Tonight? Get new twists on family favorites at AOL Food. (http://food.aol.com/dinner-tonight?NCID=aolfod000301)

Re: [RCSE] Looking for a contest plane

Looks just like my Icon a week ago.  Skin ripped off the wing skin, too.  Made quite a bang!! http://farm3.static.flickr.com/2090/2375690129_b78095e80b_b.jpg tony estep wrote: Here's a Pike Perfect, a little bit of a fixer-upper: http://www.rcgroups.com/forums/attachment.php?

Re: [RCSE] Looking for a contest plane

That is how I got into this sport to be honest. Ron Turner of Vancouver sold me his Stratos in almost the smae shape :) On Tue, Apr 8, 2008 at 5:06 PM, tony estep <[EMAIL PROTECTED]> wrote: > Here's a Pike Perfect, a little bit of a fixer-upper: > > http://www.rcgroups.com/forums/attachment.php?

Re: [RCSE] Looking for a contest plane

Here's a Pike Perfect, a little bit of a fixer-upper: http://www.rcgroups.com/forums/attachment.php?attachmentid=1806429

Re: [RCSE] Looking for a contest plane

http://adesigner.com/brass/brasale.htm - Original Message - From: [EMAIL PROTECTED] To: Soaring@airage.com Cc: LISF Dan Siegel Sent: Monday, April 07, 2008 2:42 PM Subject: [RCSE] Looking for a contest plane My friend Dan is looking for a contest class plane. He is

[RCSE] Looking for a contest plane

My friend Dan is looking for a contest class plane. He is not sure what is available but he is looking for a receiver ready full house plane in very good condition as he does not like to do any kind of building at all. He has no workshop and the dining room table well it doesn't really wo

[RCSE] Looking for Challenger plans

hi...i am looking for the wing plan for Otto Heithhecker's nostalgia "Challanger."specifically for the trailing edge detailsfor his flap...i want to see how he built the flap...and how he reinforced the trailing edge in front of the flap.. PM me if you can help :confused:

Re: [RCSE] Looking for Carbon plate?

How about this place: Dragonplate I haven't bought plate from them but have gotten some tubes which were nice. Jerry Jimmy wrote: I havent found a shop in the US that sells thicker panels, but R&G has them. Shop: http://www.r-g.de/en/ Link to page with Carbon Panels

Re: [RCSE] Looking for Carbon plate?

I havent found a shop in the US that sells thicker panels, but R&G has them. Shop: http://www.r-g.de/en/ Link to page with Carbon Panels: http://shop.ezentrum.de/2501444/OQ2JXpoD7TWdDt0GvWTsUaOyw1GeJj/4DCGI/ezshop?action=wgruppenstart&warengruppenlist=4124&Suchid=0&manufacturer=&Suchstartpos=1

Re: [RCSE] Looking for Carbon plate?

My usual place to get CF strips for spars is Aerospace Composite Products http://www.acp-composites.com/acp-gp.htm Good prices excellent service. But The Composite Store has more on the thinner side http://www.cstsales.com/carbon_plate.html I've kept the link, but have not ever ordered from them.

Re: [RCSE] Looking for a Charger

A new one retails for $54.95, and I have them in stock  :-) George, The SIRIUS guy   ! At 08:51 PM 3/24/2008 -0500, Steve Schneider wrote: I have one.  Make an offer, I don't remember what I paid for it.  Or ask Gordy what its worth, I'm sure he knows. On Wed, Mar 19, 2008 at 8:39 PM, Tag1260

[RCSE] Looking for Carbon plate?

I have started work on my Dad's 1/3 scale Aronca C-3 and need to replace all the control horns. They are made out what looks like phenolic and it has deteriorated over the 30 odd years... So I'm looking for some pre-made Carbon sheet 1/8 or 3/16 thick 2 to 3 inches wide and maybe 1 ft long to

Re: [RCSE] Looking for a Charger

I have one. Make an offer, I don't remember what I paid for it. Or ask Gordy what its worth, I'm sure he knows. On Wed, Mar 19, 2008 at 8:39 PM, Tag1260 <[EMAIL PROTECTED]> wrote: > > I am looking to find a good Sirius Charge 200 for a couple small > batteries that I use. Anyone got one that th

[RCSE] Looking for a Charger

I am looking to find a good Sirius Charge 200 for a couple small batteries that I use. Anyone got one that they aren't using that they'd like to sell? Thanks -- Tag1260 Tag1260's Profile: http://www.rcgroups.com/forums/mem

[RCSE] Looking for American companys that specialize in exotic fibers?

This is a little off topic but I thought one of you might be able to help... I have a Friend who is just graduating from Collage with a Master of Science Degree specializing in Fiber science and is looking for a company to inter at. Eliza currently lives in Poland but will be living in the USA s

[RCSE] Looking for scale sailplane

I have a friend of mine that is looking for a scale 4-5 meter plane. Trying to keep the cost to around $500. Any suggestions other than the "Chinese Specials"? TIA Stan

Re: [RCSE] Looking for source wing rods

Try HilaunchClarence http://www.hilaunch.com/ Stan Myers wrote: I need a wing rod 11/32" diameter with a prebent 8* dihedral. 12 3/4" overall length. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please not

[RCSE] Looking for source wing rods

I need a wing rod 11/32" diameter with a prebent 8* dihedral. 12 3/4" overall length. Stan

[RCSE] Looking for Larry Vincek

Anyone have his phone or email address? Thanks Gordy **See AOL's top rated recipes (http://food.aol.com/top-rated-recipes?NCID=aoltop000304)

[RCSE] Looking for Dr. Dan's Contact #, can someone please provide me with that info.

Looking for Dr. Dan's Cell phone number, he's out here in California currently visiting family and I want to get in touch with him before he heads back home... can someone please provide me with his Cell phone number? please respond off-line directly to [EMAIL PROTECTED] Many thanks in advance, Ed

[RCSE] "Looking for a dinged and dented Sharon"

Okay Mike wants one in good condition, I just want one in fly able condition, or even if you have some wing parts, or a stab. Gordy **See AOL's top rated recipes (http://food.aol.com/top-rated-recipes?NCID=aoltop000304)

[RCSE] Looking for Chico's contact phone number, can someone hook me up with this number... please provide off-line!

Need to get in touch with Chico from Arizona... does anyone have his phone # they can hook me up with!?!?! Thanks in advance, Edgar Vera The Soaring Junkie Be a better friend, newshound, and know-it-a

[RCSE] Looking for RTF or NIB Pike Perfect and/or Aspire glider... let me know what you have...

K, looking for a new potential contest plane for next season or just to see what these models have to offer. Please provide pictures, preferred colors are Yellow & black or blue bottoms... Thanks Edgar Vera "The Soaring Junkie"

Re: [RCSE] Looking for Information on Trophies for Flying contests

base… See picture of one below: http://www.seattleareasoaringsociety.com/contests/Contest_Notices/TDContests/DennisOtter-2005.htm Joe *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *Sent:* Sunday, December 02, 2007 2:43 PM *To:* soaring@airage.com *Subject:* [RCSE] Looking for Information

Re: [RCSE] Looking for Information on Trophies for Flying contests

http://www.adesigner.com/brass/troph.jpg RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based

Re: [RCSE] Looking for Information on Trophies for Flying contests

PM Subject: [RCSE] Looking for Information on Trophies for Flying contests Anyone out there know of some trophies that work well for Thermal Duration flying? I have all the usual stuff, but the club up here in Seattle is looking for something a little different than the usual cup or

RE: [RCSE] Looking for Information on Trophies for Flying contests

/DennisOtter-2005.htm Joe From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Sunday, December 02, 2007 2:43 PM To: soaring@airage.com Subject: [RCSE] Looking for Information on Trophies for Flying contests Anyone out there know of some trophies that work well for Thermal Duration flying

Re: [RCSE] Looking for Information on Trophies for Flying contests

, December 02, 2007 7:43 PM Subject: [RCSE] Looking for Information on Trophies for Flying contests Anyone out there know of some trophies that work well for Thermal Duration flying? I have all the usual stuff, but the club up here in Seattle is looking for something a little different than

Re: [RCSE] Looking for Information on Trophies for Flying contests

CRRC has given engraved crystal beer mugs from Engravingcreations.com for several years. They have been very popular, especially the huhe onsed we giver for first place. They are no more expensive that regular trophies. Anker [EMAIL PROTECTED] wrote: Anyone out there know of some trophies t

[RCSE] Looking for Information on Trophies for Flying contests

Anyone out there know of some trophies that work well for Thermal Duration flying? I have all the usual stuff, but the club up here in Seattle is looking for something a little different than the usual cup or slab of wood. If you have any ideas or contacts, please let me know. Thanks

[RCSE] Looking for 2m histart for a EZ Glider

I am hoping I can find one of these in good condition that I can use on an EASY Glider. This is my first bungee/histart/ plane and I want something that won't destroy my model. Any of you guys in CASA or BASS that have one I would love to meet you this weekend and grab it. Thanks.

[RCSE] Looking for a Berg 7ch receiver....

Who has some good "deals" on them? THX Stan

[RCSE] Looking for Dale Nutter's email address

Thx

[RCSE] Looking for Dale Nutter's email address

Any help out there? Stan

Re: [RCSE] Looking for an Airtronics 94401 Servo

Thanks for the replies. Found one. Larrys - Original Message - From: Larry Storie To: soaring@airage.com Sent: Friday, November 17, 2006 11:57 AM Subject: [RCSE] Looking for an Airtronics 94401 Servo I have an application where I used an Airtronics 94401 Servo which has

[RCSE] Looking for an Airtronics 94401 Servo

I have an application where I used an Airtronics 94401 Servo which has gone bad. Does anyone out there have a 401 that they would part with? It does not have to have good gears (used to be the weak link) as long as it runs. Larrys

[RCSE] Looking for 'Steve - southern Texas' radio collector

Hi All:   Need to reach Steve the radio collector in southern (lower) Texas ...   Any suggestions certainly appreciated ...   Thanks,   Pepper KayTPG - SLNTAMA # 3937LSF # 3335 - Level IV  

[RCSE] looking for an SBXC

If you have an SBXC in good shape you're willing to sell, send me a note.Unbuilt kit or complete aircraft ok. Thanks, Jon RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe m

[RCSE] Looking for a Yellow & Black Emerald TD Ship

Does anyone have such a plane for sale? I don't believe this model is currently being produced, is this correct? If anyone has a new kit in box, please let me know if you're thinking of selling. Thanks Edgar "The Soaring Junkie" RCSE-List facilities provided by Model Airplane News. Send "sub

[RCSE] Looking For Pic

Anyone have a Picolario they want to get rid of? Mark RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent

[RCSE] Looking for Mehrdad Amir

Mehrdad... Pls ping me. Lost your e-mail address. Tom RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent

[RCSE] looking for

Looking for Dan Durbin in Washington St. with the 1-26. Mickey Sullivan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned

RE: [RCSE] Looking for TD plane

esday, August 01, 2006 3:30 PM To: RCSE Subject: [RCSE] Looking for TD plane Hi Guys, I have been out of the TD scene for a while concentrating on mostly slope flying but now have the bug for a TD plane. I am interested in NIB or RTF planes. RTF Plane must be in Very Good to Excellent Condition and

[RCSE] Looking for TD plane

Hi Guys, I have been out of the TD scene for a while concentrating on mostly slope flying but now have the bug for a TD plane. I am interested in NIB or RTF planes. RTF Plane must be in Very Good to Excellent Condition and have quality servos, i.e. JR, Airtronics, MPX, Volz, etc. Let me kno

[RCSE] Looking for Ava and or Wing bag

I just bought a Ava and was looking for a wing bag for it also if you have a Ava that is RTF and Very Reasonable Priced please email me with what you have.. Thanks for looking Mike.M So Cal.. Team SWSA Team Magnum

[RCSE] Looking for JW

Joe please ping me off line about the F3B TS, I do not have your email address or phone number and we need to talk a little. Jack RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe

Re: [RCSE] Looking for a 2-M

Have you ever tried to buy a Y2K? Randy - Original Message - I see a Duck commercial here. The most touted un-obtainable plane made. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe

RE: [RCSE] Looking for a 2-M

Strother" <[EMAIL PROTECTED]> >To: "S Meyer" <[EMAIL PROTECTED]>; "Louis J. Glaab" ><[EMAIL PROTECTED]> >Cc: >Sent: Wednesday, June 21, 2006 4:51 PM >Subject: Re: [RCSE] Looking for a 2-M > > >>Can't find One? >>Ano

Re: [RCSE] Looking for a 2-M

I see a Duck commercial here. The most touted un-obtainable plane made. Steve SOAR LSF IV At 10:54 PM 6/21/2006, Lincoln Ross wrote: You guys just need to explore low aspect ratio design so you can see the plane. I doubt if an 8:1 2M is much harder to see than a 16:1 unlimited. Hide radio in

Re: [RCSE] Looking for a 2-M

At 10:54 PM 6/21/2006, you wrote: You guys just need to explore low aspect ratio design so you can see the plane. I doubt if an 8:1 2M is much harder to see than a 16:1 unlimited. Hide radio in tapered wing. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscrib

[RCSE] Looking for a Super Slim receivers

Hey guys I’m looking for a New in Box Super Slim receiver JR or Airtronics shift.   Anyone have any?   Thanks Darrell Z.

Re: [RCSE] Looking for a 2-M

You guys just need to explore low aspect ratio design so you can see the plane. I doubt if an 8:1 2M is much harder to see than a 16:1 unlimited. Hide radio in tapered wing. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

Re: [RCSE] Looking for a 2-M

From: Chuck Anderson <[EMAIL PROTECTED]> I can still fly small fast planes but only by keeping them close enough to see which doesn't work too well for thermal soaring tasks. === I know what ya mean, Chuck. My idea of flying a small plane is hovering my electric in the ba

Re: [RCSE] Looking for a 2-M

Nats entries as of 6/15: F3B--13 X-C---15 HLG---24 2M---67 UNL--102 RES--81 Let's seecan 2M and increase days for X-C.The logic escapes me. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe

Re: [RCSE] Looking for a 2-M

At 05:01 PM 6/21/2006, you wrote: In a message dated 6/21/2006 4:23:56 P.M. Central Daylight Time, [EMAIL PROTECTED] writes: That could open up a day for XC every year instead of every two. Tired eyes can see a big plane My 2 meter models are ready to go! Too bad you old guys cannot

Re: [RCSE] Looking for a 2-M

Mine's green and I actually fly it every now and then...  fun to fly and lands pretty darn good too.   ;-) At 05:01 PM 6/21/2006, [EMAIL PROTECTED] wrote:     My 2 meter models are ready to go!  Too bad you old guys cannot fly small, fast sailplanes! Jim Downers Grove, IL Member of the Chicago S

Re: [RCSE] Looking for a 2-M

In a message dated 6/21/2006 4:23:56 P.M. Central Daylight Time, [EMAIL PROTECTED] writes: That could open up a day for XC every year instead of every two.  Tired eyes can see a big plane My 2 meter models are ready to go!  Too bad you old guys cannot fly small, fast sailplanes!

Re: [RCSE] Looking for a 2-M

other" <[EMAIL PROTECTED]> To: "S Meyer" <[EMAIL PROTECTED]>; "Louis J. Glaab" <[EMAIL PROTECTED]> Cc: Sent: Wednesday, June 21, 2006 4:51 PM Subject: Re: [RCSE] Looking for a 2-M Can't find One? Another reason to can the event.LOL -- Jack Strother

Re: [RCSE] Looking for a 2-M

gt; Cc: Sent: Wednesday, June 21, 2006 4:51 PM Subject: Re: [RCSE] Looking for a 2-M Can't find One? Another reason to can the event.LOL -- Jack Strother Granger, IN LSF 2948 LSF Level V #117 LSF Official 1996 - 2004 CSS Gold -- Original message -- F

Re: [RCSE] Looking for a 2-M

Can't find One? Another reason to can the event.LOL -- Jack Strother Granger, IN LSF 2948 LSF Level V #117 LSF Official 1996 - 2004 CSS Gold -- Original message -- From: S Meyer <[EMAIL PROTECTED]> > Welcome to my world. > > At 10:24 A

Re: [RCSE] Looking for a 2-M

Welcome to my world. At 10:24 AM 6/21/2006, Louis J. Glaab wrote: Good afternoon, Against my better judgement, I am registered for 2-M at the NATS. I would like to get a "gently used" 2-M Mantis or something like that (loan, rent, buy). Anyone? Thanks, Josh. RCSE-List facilities provide

[RCSE] Looking for a 2-M

Good afternoon, Against my better judgement, I am registered for 2-M at the NATS. I would like to get a "gently used" 2-M Mantis or something like that (loan, rent, buy). Anyone? Thanks, Josh. Office phone: (757)864-1159 Cell phone: (757)870-6720 Business mailing address: Mail Stop 152, 2

[RCSE] Looking for Steve Johnson

Steve, please ping me back. Thanks Edgar Vera "The Soaring Junkie" __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com RCSE-List facilities provided by Model Airplane News. Send "subscribe" and

RE: [RCSE] Looking for fastner the holds stab on pedestal on Supra or Ava

Digest Subject: [RCSE] Looking for fastner the holds stab on pedestal on Supra or Ava Lost mine. Getting one from Ukraine not not a likely prospect. Will entertain alternate methods of holding the stab with local available parts. Surely I'm not the only one that lost that aluminum fastener.

RE: [RCSE] Looking for fastner the holds stab on pedestal on Supra or Ava

: [RCSE] Looking for fastner the holds stab on pedestal on Supra or Ava Lost mine. Getting one from Ukraine not not a likely prospect. Will entertain alternate methods of holding the stab with local available parts. Surely I'm not the only one that lost that aluminum fastener. Stan RCSE

Re: [RCSE] Looking for fastner the holds stab on pedestal on Supra or Ava

> Lost mine. Getting one from Ukraine not not a likely prospect. Will > entertain alternate methods of holding the stab with local available parts. > > Surely I'm not the only one that lost that aluminum fastener. IF you're truly desperate, you can remove the threaded stud and use a metric nylon

Re: [RCSE] Looking for fastner the holds stab on pedestal on Supra or Ava

I thought that may be the first hardware item lost. Good thing it is silver color and not black. Although the best method for finding small hardware parts in the grass will not work with that "special" nut, it's aluminum, so a powerful magnet will not attract it. Maybe I should paint it fluo

[RCSE] Looking for fastner the holds stab on pedestal on Supra or Ava

Lost mine. Getting one from Ukraine not not a likely prospect. Will entertain alternate methods of holding the stab with local available parts. Surely I'm not the only one that lost that aluminum fastener. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsub

[RCSE] looking for gordy

Gordy, ping me Stumper -- CoreComm Webmail. http://home.core.com

Re: [RCSE] Looking for a Futaba Shift Hitec SuperSlim Rx

"exchange" Sent: Sunday, May 21, 2006 9:10 PM Subject: [RCSE] Looking for a Futaba Shift Hitec SuperSlim Rx By any chance, does anyone have a new in box Hitec Superslim Rx in Futaba shift that they are willing to sell? Please contact me off line at "[EMAIL PROTECTED]&quo

[RCSE] Looking for a Futaba Shift Hitec SuperSlim Rx

By any chance, does anyone have a new in box Hitec Superslim Rx in Futaba shift that they are willing to sell? Please contact me off line at "[EMAIL PROTECTED]" Thanks Edgar "The Soaring Junkie" __ Do You Yahoo!? Tired of spam? Yahoo! Mail has th

Re: [RCSE] Looking for a new toy, what do you guys have for sale!!!

If you post it one more time, maybe we'll get the message :~)Flying High <[EMAIL PROTECTED]> wrote: It's that time again and I have an itch to buy somethingdifferent. If anyone is considering selling anything R/Crelated, please let me know! Thanks...Edgar"The Soaring Junkie"___

RE: [RCSE] Looking for a new toy, what do you guys have for sale!!!

Hey Pops. You could buy one of my Starling Pro, fully molded, V tail, 2 metre span gliders. 39oz RTF. Have to come over and pick one up though :) Klaus Weiss Sydney Australia http://www.hsl.org.au http://www.airsportsrc.com.au RCSE-List facilities provided by Model Airplane New

[RCSE] Looking for a new toy, what do you guys have for sale!!!

It's that time again and I have an itch to buy something different. If anyone is considering selling anything R/C related, please let me know! Thanks... Edgar "The Soaring Junkie" __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam p

[RCSE] Looking for a new toy, what do you guys have for sale!!!

It's that time again and I have an itch to buy something different. If anyone is considering selling anything R/C related, please let me know! Thanks... Edgar "The Soaring Junkie" __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam p

[RCSE] Looking for a new toy, what do you guys have for sale!!!

It's that time again and I have an itch to buy something different. If anyone is considering selling anything R/C related, please let me know! Thanks... Edgar "The Soaring Junkie" __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam p

[RCSE] Looking for Dr. Dan, can anyone provide some contact info on him. THANKS!!!

Looking to get in touch with Dr. Dan. Does anyone have his contact info? Please ping me back in a private message. "[EMAIL PROTECTED]" Thanks Edgar "The Soaring Junkie" __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection arou

[RCSE] "Looking...for some cheap distance glasses?"

http://zennioptical.com   The home of $16 or $19 glasses.   You have to have the prescription (just the numbers) and the measurement between the centers of your pupils, but you can add tint and other stuff  for about $5 an add.   When you figure most of us buy readers at the dollar store, 10 a

[RCSE] Looking for Peter Baumeler

Please contact me with your latest email address. Thanks! ___ Try the New Netscape Mail Today! Virtually Spam-Free | More Storage | Import Your Contact List http://mail.netscape.com RCSE-List facilities provided by Model Airplane News. Send "subscr

RE: [RCSE] Looking for the pdf file that Sherman Knight wrote on the 9303

http://www.horizonhobby.com/Articles/Article.aspx?ArticleID=1459 -Original Message- From: Stan Myers [mailto:[EMAIL PROTECTED] Sent: Monday, April 24, 2006 6:15 PM To: Soaring Digest Subject: [RCSE] Looking for the pdf file that Sherman Knight wrote on the 9303 TIA Stan RCSE-List

[RCSE] Looking for the pdf file that Sherman Knight wrote on the 9303

TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL

[RCSE] Looking for

Looking for Mike Fox and David Zucker, please call me asap 800-532-0092 George RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME

[RCSE] Looking for Foam in So Cal...

Does anyone know of a source for Dow Blue Owens Corning Pik foam in southern California? Paul RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only

[RCSE] Looking for Craig Jensen

Hey Craig ping me.   Thanks Darrell Z.

  1   2   3   4   5   >