> ... had the same issue / it's solved with the latest BIOS ->
> http://soekris.com/Software/b5501_132i.bin
>
> ev
>
> On 14/10/2007, Dorian Büttner <[EMAIL PROTECTED]> wrote:
>
>> HDD and soft-reboot issue:
>> PATA disk (Hitachi 100G) and 1G-CF Card => no luck detecting any of them
>> pull CF
... had the same issue / it's solved with the latest BIOS ->
http://soekris.com/Software/b5501_132i.bin
ev
On 14/10/2007, Dorian Büttner <[EMAIL PROTECTED]> wrote:
> HDD and soft-reboot issue:
> PATA disk (Hitachi 100G) and 1G-CF Card => no luck detecting any of them
> pull CF out -> HDD boots fi
HDD and soft-reboot issue:
PATA disk (Hitachi 100G) and 1G-CF Card => no luck detecting any of them
pull CF out -> HDD boots fine.
Also for hard reboot.
I believe I saw a posting on this list same scenario but with a 4Gig CF.
Propably it wasn't the 1.32i-thread.
___
I've just added a macro script for tera term for mass updating soekris
boxes, hope this helps somebody, I've sure had a good use for it
lately, it was time well spend writing it :)
On 10/12/07, Matteo Basso - Net Stop Snc <[EMAIL PROTECTED]> wrote:
> ervin ha scritto:
> > Over the last week or so
ervin ha scritto:
> Over the last week or so many people had unnecessary problems with the
> BIOS update all tips and tricks are in this document "Soekris
> Setup: BIOS Update" -> http://www.ultradesic.com/?section=36 try
> it :-)
or write a wiki at http://wiki.soekris.info/Updating_Bios
Over the last week or so many people had unnecessary problems with the
BIOS update all tips and tricks are in this document "Soekris
Setup: BIOS Update" -> http://www.ultradesic.com/?section=36 try
it :-)
On 11/10/2007, Marco A. Calamari <[EMAIL PROTECTED]> wrote:
> On Thu, 2007-10-11 at
On Thu, 2007-10-11 at 11:59 -0400, Mike Tancsa wrote:
> At 11:48 AM 10/11/2007, Ryan L. Faircloth wrote:
> >I am attempting to update one of these units that currently runs
> >1.31. Using Hypercom the transfer appears to work
>
> Hypercom should work, but try and do it with cu and lsx just in cas
At 11:48 AM 10/11/2007, Ryan L. Faircloth wrote:
>I am attempting to update one of these units that currently runs
>1.31. Using Hypercom the transfer appears to work
Hypercom should work, but try and do it with cu and lsx just in case
there is some strange issue with hypercom. I have done a half
I am attempting to update one of these units that currently runs 1.31. Using
Hypercom the transfer appears to work
> download
Start sending file using XMODEM/CRC protocol.
CC
File downloaded succesfully, size 784 Blocks.
However the flashupdate command gives a generic error. Any suggestion
Soren,
the problems I reported this morning, persist. Faulty unit?
Thanks.
Soren Kristensen wrote:
> Hi Everybody,
>
> I just posted a net5501 BIOS update with:
> comBIOS vers 1.32i
>
>* fixed PCI config byte/word write handling (IDE DMA enable)
>
> This time it should hopefully fix any I
> " " == soekris <[EMAIL PROTECTED]> writes:
> What would be the best approach now for a linux 2.6.22 system ?
> - use the pata_amd module
>OR
> - patch the kernel with:
> http://mkp.net/code/pata_cs5536/cs5536-20071005-msr.patch and use
> the pata_cs5536 module
The pata_amd m
At 04:05 PM 10/5/2007, Poul-Henning Kamp wrote:
>In message <[EMAIL PROTECTED]>, Mike Tancsa writes:
> >At 03:41 PM 10/5/2007, Poul-Henning Kamp wrote:
> >>In message <[EMAIL PROTECTED]>, Mike
> Tancsa writes:
> >>
> >> >The only mystery remaining is that FreeBSD 6.x sees this flash as
> >> >ad1,
In message <[EMAIL PROTECTED]>, Mike Tancsa writes:
>At 03:41 PM 10/5/2007, Poul-Henning Kamp wrote:
>>In message <[EMAIL PROTECTED]>, Mike Tancsa writes:
>>
>> >The only mystery remaining is that FreeBSD 6.x sees this flash as
>> >ad1, but FreeBSD current sees it as ad0.
>>
>>Have you by any chanc
At 03:41 PM 10/5/2007, Poul-Henning Kamp wrote:
>In message <[EMAIL PROTECTED]>, Mike Tancsa writes:
>
> >The only mystery remaining is that FreeBSD 6.x sees this flash as
> >ad1, but FreeBSD current sees it as ad0.
>
>Have you by any chance lost the ATA_STATIC_ID option in your -current
>kernel ?
On Friday 05 October 2007 17:17, Martin K. Petersen wrote:
> > "Soren" == Soren Kristensen <[EMAIL PROTECTED]> writes:
>
> Soren>* fixed PCI config byte/word write handling (IDE DMA enable)
>
> Yup, it works! A standard Linux kernel can now correctly configure
> the IDE interface.
>
> Than
In message <[EMAIL PROTECTED]>, Mike Tancsa writes:
>The only mystery remaining is that FreeBSD 6.x sees this flash as
>ad1, but FreeBSD current sees it as ad0.
Have you by any chance lost the ATA_STATIC_ID option in your -current
kernel ?
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.2
At 11:01 AM 10/5/2007, Soren Kristensen wrote:
>Hi Everybody,
>
>I just posted a net5501 BIOS update with:
>comBIOS vers 1.32i
>
>* fixed PCI config byte/word write handling (IDE DMA enable)
>
>This time it should hopefully fix any IDE DMA setup issues But
>please let me know how it goes.
> "Soren" == Soren Kristensen <[EMAIL PROTECTED]> writes:
Soren>* fixed PCI config byte/word write handling (IDE DMA enable)
Yup, it works! A standard Linux kernel can now correctly configure
the IDE interface.
Thanks for fixing this!
--
Martin K. Petersen http://mkp.net/
___
Hi Everybody,
I just posted a net5501 BIOS update with:
comBIOS vers 1.32i
* fixed PCI config byte/word write handling (IDE DMA enable)
This time it should hopefully fix any IDE DMA setup issues But
please let me know how it goes.
Best Regards,
Soren Kristensen
CEO & Chief Engineer
Downgraded the bios to 1.32d on this particular 5501 and the problems
still occur:
#1 - "MII without any phy!" in all vr interfaces; same CF (SiliconDrive
CF SSD-C01G-3550) on other 5501's (1.32d) will work fine; I can't say if
the problem occurred before the upgrade to 1.32h since this 5501 wasn'
At 02:04 AM 10/4/2007, Poul-Henning Kamp wrote:
>In message <[EMAIL PROTECTED]>,
>Andreas Wrede writes:
>
> >Under NetBSD -current, the controller reports Ultra-DMA mode 4
> >capability, the drive I have is Ultra-DMA mode 5 and they end up
> >communicating at Ultra 4. Looks OK, if Ultra-DMA mode 4
I don't think so ... I'm running 6.2 as well and no issues after the upgrade :-)
On 04/10/2007, Joao Pedras <[EMAIL PROTECTED]> wrote:
> Joao Pedras wrote:
> > Mike Tancsa wrote:
> >> At 07:51 PM 10/3/2007, Soren Kristensen wrote:
> >>> Hi Everybody,
> >>>
> >>> I just posted a net5501 BIOS update
Joao Pedras wrote:
> Mike Tancsa wrote:
>> At 07:51 PM 10/3/2007, Soren Kristensen wrote:
>>> Hi Everybody,
>>>
>>> I just posted a net5501 BIOS update with:
>>> comBIOS vers 1.32h
>>>
>>>* fixed IDE DMA enable issue on net5501
>>>* fixed soft reboot issue on net5501
>>
>> Hi,
>> U
The warm (soft) boot issue is solved with the new BIOS ... thx :-) ervin
On 04/10/2007, Joao Pedras <[EMAIL PROTECTED]> wrote:
> Mike Tancsa wrote:
> > At 07:51 PM 10/3/2007, Soren Kristensen wrote:
> >> Hi Everybody,
> >>
> >> I just posted a net5501 BIOS update with:
> >> comBIOS vers 1.32h
Mike Tancsa wrote:
> At 07:51 PM 10/3/2007, Soren Kristensen wrote:
>> Hi Everybody,
>>
>> I just posted a net5501 BIOS update with:
>> comBIOS vers 1.32h
>>
>>* fixed IDE DMA enable issue on net5501
>>* fixed soft reboot issue on net5501
>
>
> Hi,
> Unfortunately, I still see th
Resolved IDE HD reboot problems for me on my Net5501s (OpenBSD4.1) - thanks!
:
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd1 at pciide0 channel 0 drive 1:
wd1: 1-sector PIO, LBA, 3871MB, 7928928 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA
On Oct 4, 2007, at 2:04 , Poul-Henning Kamp wrote:
> In message <[EMAIL PROTECTED]>,
> Andreas Wrede writes:
>
>> Under NetBSD -current, the controller reports Ultra-DMA mode 4
>> capability, the drive I have is Ultra-DMA mode 5 and they end up
>> communicating at Ultra 4. Looks OK, if Ultra-DM
In message <[EMAIL PROTECTED]>, Andreas Wrede writes:
>Under NetBSD -current, the controller reports Ultra-DMA mode 4
>capability, the drive I have is Ultra-DMA mode 5 and they end up
>communicating at Ultra 4. Looks OK, if Ultra-DMA mode 4 (Ultra/66) is
>actually the top speed of the contro
At 07:51 PM 10/3/2007, Soren Kristensen wrote:
>Hi Everybody,
>
>I just posted a net5501 BIOS update with:
>comBIOS vers 1.32h
>
>* fixed IDE DMA enable issue on net5501
>* fixed soft reboot issue on net5501
Hi,
Unfortunately, I still see the soft reboot issue on FreeBSD.
e.g. f
On Oct 3, 2007, at 19:51 , Soren Kristensen wrote:
Hi Everybody,
I just posted a net5501 BIOS update with:
comBIOS vers 1.32h
* fixed IDE DMA enable issue on net5501
* fixed soft reboot issue on net5501
* change initial clear screen to scroll lines
This all works fine now.
There
Hi Everybody,
I just posted a net5501 BIOS update with:
comBIOS vers 1.32h
* fixed IDE DMA enable issue on net5501
* fixed soft reboot issue on net5501
* change initial clear screen to scroll lines
There might still be issues with Ultra-DMA detect/setting, I would be
happy to get a few
... if you mean download and update the bios it's here the
update part: http://www.ultradesic.com/?section=36
br ev
On 27/09/2007, Soekris Tech <[EMAIL PROTECTED]> wrote:
> Hi Folks,
>
> how can i downgrade and the upgrade the bios on the net5501, like the
> recommendation on the homepage
Hi Folks,
how can i downgrade and the upgrade the bios on the net5501, like the
recommendation on the homepage says?
Regards,
Juergen
___
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech
On 9/22/07, Philemon Daubard <[EMAIL PROTECTED]> wrote:
> Soren Kristensen wrote:
> > Hi Everybody,
> >
> > For the record, the warm boot issues has not been fixed yet, it's still
> > there and probably also affect SATA drives.
> >
> > But that issue is next on my list and will be fixed soon.
> >
>
Soren Kristensen wrote:
> Hi Everybody,
>
> For the record, the warm boot issues has not been fixed yet, it's still
> there and probably also affect SATA drives.
>
> But that issue is next on my list and will be fixed soon.
>
>
> Best Regards,
>
>
> Soren Kristensen
>
> CEO & Chief Engineer
Hi Everybody,
For the record, the warm boot issues has not been fixed yet, it's still
there and probably also affect SATA drives.
But that issue is next on my list and will be fixed soon.
Best Regards,
Soren Kristensen
CEO & Chief Engineer
Soekris Engineering, Inc.
_
> I installed the new BIOS as well this morning to test if the reboot problem
> might have been addressed. I'm using the UltraDMA-100 i/f for my HD and it
> still won't recognize the drive on a warm reboot; a hard reset is still
> required to boot from the HD.
whoops! this is not a good thing for
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Randy Bush
Sent: Friday, September 21, 2007 1:25 PM
To: Henrik Lund Kramshøj
Cc: soekris-tech@lists.soekris.com
Subject: Re: [Soekris] net5501 BIOS Update
>> * fixed bug disabling SATA interface on net5501
> I am one o
>> * fixed bug disabling SATA interface on net5501
> I am one of those that have a disk that isn't recognized
> and just to confirm, it still doesn't work - but I upgraded
> anyway.
i have a TOSHIBA MK1637GSX DL021A and it is recognized and boots and runs.
but i have noticed that, when i issue a
On 21/09/2007, at 0.30, Soren Kristensen wrote:
> Hi Everybody,
>
> I just posted a net5501 BIOS update with:
>
> comBIOS vers 1.32d
>
>* fixed incorrect USB 2.0 reporting on net5501
>* fixed bug disabling SATA interface on net5501
>
>
> I'm working to fix any other remaining issues.
Supe
On Fri, Sep 21, 2007 at 12:30:53AM +0200, Soren Kristensen wrote:
> Hi Everybody,
>
> [...]
>
> I'm working to fix any other remaining issues.
Hi Soren,
Thanks for the update. Is there a list somewhere with the issues that
have been acknowledged by you and that are being worked on? Something
lik
>* fixed bug disabling SATA interface on net5501
indeed you did. thank you.
freebsd running fine on a sata on 5501/70
randy
___
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech
Hi Everybody,
I just posted a net5501 BIOS update with:
comBIOS vers 1.32d
* fixed incorrect USB 2.0 reporting on net5501
* fixed bug disabling SATA interface on net5501
I'm working to fix any other remaining issues.
Best Regards,
Soren Kristensen
CEO & Chief Engineer
Soekris Engine
43 matches
Mail list logo