paul- wrote:
> amd64 is not aarch64(arm64)
>
> There is no prebuilt image availiable from
> http://downloads.slimdevices.com/releases/latest.xml for aarch64.
Oh my gosh, sometimes i need glases. thx a lot!
hellvisde's
amd64 is not aarch64(arm64)
There is no prebuilt image availiable from
http://downloads.slimdevices.com/releases/latest.xml for aarch64.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cm
Hi,
i´m running my lms 8.2.1 ((ARM) on a raspberry pi4b 4GB based on the
max2play Image.
Now i tryed to use the 64bit version, but it does´nt start after
installing the arm64 version.
Code:
sudo dpkg -i /home/pi/logitechmediaserver_8.2.1~1633378390_amd64.deb
(Lese Da
I am running LMS V8.1.1 on an iMac 10.12.6
Most likely you're suffering issues with outdated SSL support. What
IO::Socket::SSL version are you using (see Settings/Information)? You
might need to follow steps outlined here to get up to date:
https://forums.slimdevices.com/showthread.php?10973
I am running LMS V8.1.1 on an iMac 10.12.6
I put myself through hell getting Spotify back when they screwed us! But
finally got it Spotty working.
Recently Spotify stopped working; Spotty was nowhere to be found in the
Settings of LMS in active or inactive plugins. (and no Spotify either)
I hav
svetter wrote:
>
> Paul - separately - I noticed that you are developer of the CBC Radio
> plugin. As a resident of Toronto I have been disappointed that this
> plug-in has not worked for a long time - I get "404 Not Found".
> Searching for CBC on this forum doesn't come up with any hits...
Paul, Gary - thanks for your follow-up notes.
I checked the link
(https://docs.picoreplayer.org/how-to...ird_partition/) re. adding a
partition to the memory card and noted the following at the top of the
page... Looks like I will live with the USB stick in the pi. maybe get
a short USB extend
I assume you've seen this? I haven't done it myself (I have a 4TB USB
drive connected to my rPi).
https://docs.picoreplayer.org/how-to/add_third_partition/
*Home:* Pi4B-8GB/pCP7.x/4TB>LMS 8.1.x>Transporter, Touch, Boom, Radio
(all ethernet)
*Cottage:* rPi4B-4GB/pCP7.x/4TB>LMS 8.1.x>Touch>Benc
I am sure that the team behind pCP would welcome suggested edits from
first time users.
Writing documentation when it is something that you have done 100 times
is not the necessarily the best for someone doing it for the first
time.
https://docs.picoreplayer.org/getting-started/
Paul Webster
h
To follow-on from my earlier message and the feedback suggestions
received regarding Raspberry pi as a platform, with piCorePlayer LMS.
My ReadyNAS died shortly after my earlier e-mails, and for a while I was
running on LMS on my laptop, but that was not very satisfactory from a
general family u
Yeah if your old NAS is still reliable then keep music on it and get
raspberry pi with piCorePlayer for LMS.
Alternatively update /upgrade NAS to smth capable of running docker..
(so with Intel CPU) and run docker version of LMS on new NAS
3x Squeezebox Touch, 4x Squeezebox Radio, Squeezelite
Easiest way is to purchase a raspberry pi and install picoreplayer and
than lms on that. Pretty good manual at picoreplayer.org
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + S
Really will appreciate some advice about the following:
I am running Logitech Media Server Version: 7.9.1 - 1522157629 @ Fri Mar
30 12:30:30 CEST 2018.
on an old but so far reliable ReadyNAS NV+ (RAIDiator 4.1.16
[1.00a043]).
Serving 4 Logitech Touch devices (all are up-to-date with v7.8.0
r16
agillis wrote:
> Everybody with a VortexBox should be updating to VortexBox 2.5.
>
> We keep this up to date with the latest LMS.
>
> LMS 8.2 was just released for VortexBox 2.5 today.
Fantastic news. But...
I tried to do a command line update of my version 8.0 of LMS and I
scre
Nice!
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch
(Study 2), few spare unit's
*Server:* LMS on Pi3 7.9.1. on PcP 3.21
*Network:* AVM Fritz
Everybody with a VortexBox should be updating to VortexBox 2.5.
We keep this up to date with the latest LMS.
LMS 8.2 was just released for VortexBox 2.5 today.
rip, tag, get cover art
All you do is insert the CD!
http://vortexbox.org
agillis
Lead Developer VortexBox
---
lssartin wrote:
> I uninstalled, reinstalled 7.9.1 and got it back. The slim device had to
> be reconfigured. Its like a ghost in the machine. I would like to get
> to 8.0 and have considered tidal, now i am scared to change anything.
>
> Any idea what happened? I control all my players via a
I uninstalled, reinstalled 7.9.1 and got it back. The slim device had to
be reconfigured. Its like a ghost in the machine. I would like to get
to 8.0 and have considered tidal, now i am scared to change anything.
Any idea what happened? I control all my players via a handheld remote,
after the
It is probably fixable ... but people here will need more information.
As a minimum the server.log from LMS and information about the operating
system that you are running LMS on.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
s
Installed update, now all devices will not connect to my music. Windows
10, (2) Duets, Boom, Radio
Uninstalled and returned to 7.9, still will not connect to My music
file, just spins, any help?
lssartin's Profile: http:
Well, we've actually worked through a couple of things. LMS seems to be
OK now.
I'm running 8.0, so unless you think I should upgrade to 8.1 we can
close this out.
Thank you again for your help, Michael.
webnick's Pro
Ugh - what is the size limit here? Wouldn't it make a bit of sense to
state a size limit when clicking the Attachments link? Regardless, I
sent it to your upload address.
Could you please summarize what we're looking for after all?... The file
is huge, but seems to end the scan correctly.
--
Ugh - what is the size limit here? Wouldn't it make a bit of sense to
state a size limit when clicking the Attachments link? Regardless, I
sent it to your upload address.
webnick's Profile: http://forums.slimdevices.com/
OK, did media scan and there appears to be a new scanner log (6618K) but
can't upload it: "scanner.log(4).zip: Upload of file failed".
Did you try my Dropbox upload link? The file is certainly too big to be
uploaded here.
https://www.dropbox.com/request/T3RctyzGgNg0oFDubq6a
And maybe it's t
OK, did media scan and there appears to be a new scanner log (6618K) but
can't upload it: "scanner.log(4).zip: Upload of file failed".
mherger wrote:
> > But are you saying that if I do a media scan, a server log and scanner
> > log are also generated? Those logs are generated as a response
But are you saying that if I do a media scan, a server log and scanner
log are also generated? Those logs are generated as a response to a
media scan request?
The scanner.log is re-built with each scan. server.log is long lived.
Please try to get me the latest scanner.log - whatever its name m
Yes, I was saving multiple copies of the same thing.
But are you saying that if I do a media scan, a server log and scanner
log are also generated? Those logs are generated as a response to a
media scan request?
webnick'
The only scan I appear to know about is the media scan (Web Control >
Settings > Server Settings > Basic Settings > Rescan Media Library _OR_
Control Panel > Media Scan Details > Rescan _OR_ Web Control > Settings
Information > Library > Rescan). What I've been doing is Web Control
Settings > Se
The only scan I appear to know about is the media scan (Web Control >
Settings > Server Settings > Basic Settings > Rescan Media Library _OR_
Control Panel > Media Scan Details > Rescan _OR_ Web Control > Settings
> Information > Library > Rescan). What I've been doing is Web Control
> Settings
Well, then, I just don't know how to run a scan.
How did you do it?
Thought I did, but I
guess I'm just sending you the same thing over and over and don't know
how to create a new one.
You'll have to re-download the log file from the server after each scan,
using the link in Settings/Inform
Well, then, I just don't know how to run a scan. Thought I did, but I
guess I'm just sending you the same thing over and over and don't know
how to create a new one. Sorry. I've tried researching this and can't
seem to find instructions on how to do it.
--
Just sent a new scan - power went out last evening and just now
restored.
I'm sorry to say, but this is the identical file as yesterday.
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailma
Just sent a new scan - power went out last evening and just now
restored.
webnick's Profile: http://forums.slimdevices.com/member.php?userid=70157
View this thread: http://forums.slimdevices.com/showthread.php?t=113289
__
I think I've run a full scan - see attachment.
The attachment is old, certainly from before you reset the logging
settings, and with the Online Music scanner still enabled.
I did a full server(?) scan but can't upload it because
"server.log(3).zip: Upload of file failed".
Please upload to
Michael, thanks for your help.
First off, the log file is from 8.0, not 7.9.3, because as I mentioned
in my edit I gave up on 7.9.3 and simply installed 8.0. I'm set for
automatic updates but haven't received an 8.0.1 notice yet.
I think I've run a full scan - see attachment.
I did have the D
OK, well then here goes as to the scanning log - server log upload fails
repeatedly.
This log file is from 8.0, not 7.9.3 as you mentioned in your first
posting. It shows an issue I've fixed in 8.0.1: that's only an online
music scan, not a full scan. You likely have the Deezer plugin
install
webnick wrote:
> OK, well then here goes as to the scanning log - server log upload fails
> repeatedly.
Something odd about installation - there are no timestamps on the log
entries. No albums found but it is not clear when this log was created.
Server.log may be too big to post. Stop LMS, del
OK, well then here goes as to the scanning log - server log upload fails
repeatedly.
+---+
|Filename: scanner.log.zip |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=3
webnick wrote:
> Thanks, Jon, but I wouldn't know how to read those logs to fix anything
> if I did. I do know how to get to them, of course, and I could save
> them as an html file. But understanding what they're saying and knowing
> what to do thereafter? Hah!
I'm no great shakes at decip
SpiderJon wrote:
> To quote mherger's sig for such situations:
>
> "It doesn't work - what shall I do?" - "Please check your server.log
> and/or scanner.log file!"
> (LMS: Settings/Information)
>
>
>
> Odd. When I updated from 7.9.3 to 8.0.0 all my existing
> preferences/settings were preserv
webnick wrote:
> When trying to update to 7.9.3 (was 7.9.1), which failed, LMS stopped.
> Now, won't start even as Administrator. I opened Control Panel as
> Administrator, clicked on "Start Logitech Media Server" - it initially
> says its running, but after a couple of seconds it stops. Tried
When trying to update to 7.9.3 (was 7.9.1), which failed, LMS stopped.
Now, won't start even as Administrator. I opened Control Panel as
Administrator, clicked on "Start Logitech Media Server" - it initially
says its running, but after a couple of seconds it stops. Tried several
times, no luck
Unfortunately you cant go from 2.3 to 2.4 or 2.5 without completely
overwriting the disk.
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TXNR686 -> Celestion F20s
*Office* - Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
*Dining Room* -> SB Boom
*Kitchen* ->
Just a quick update. I was able to upgrade my Vortexbox OS to 2.5 and
LMS to 8.0 and I am happily streaming Tidal again. The instructions
that Andrew provided over at the votexbox forum were everything I needed
to upgrade.
--
Thanks for the quick responses. I tried to register for the vortexbox
forum and sent andrew an email as well. I'll keep this thread updated
as I hear anything.
sir topham hatt's Profile: http://forums.slimdevices.com/memb
Here's the forum, but it's pretty dead these days.
https://www.vortexbox.org/
You might consider getting an rPi, installing piCorePlayer, and
attaching a USB drive with your files to the rPi. This will run LMS 8.0
and is currently very well maintained.
*Home:* VBA2.5 4TB -or- rPi4B/pCP6.1/4T
VortexBox SW Version: 2.3
Linux OS Version: Fedora release 20 (Heisenbug)
I have no idea whether there's anything particular about Vortexbox. But
I thought its author did provide packages for it? Did you ask him?
--
Michael
___
Squeezecenter mailin
I bought a Vortexbox Appliance back in 2011 and haven't really touched
it since. It is running LMS 7.8.0. I no longer use the vortexbox for
ripping or anything like that. It runs LMS so I can listen to my music
library and stream Tidal. That (and a little home backup) is all the
Vortexbox is
nervoteso wrote:
> should i wtite 7.9.4 instead of 7.9.3?
If you want 7.9.4, then yes. :)
*Server - LMS 8.0.0 *Pi4B 4GB/Flirc case/pCP 6.1.0 - 74K library,
playlists & LMS cache on SSD (ntfs)
*Study -* Pi3B/pCP 6.1.0/pi screen/Allo Boss DAC Ruark MR1 Mk2
*Lounge* - Pi2/pCP 6.0.0 > HiFiBerry
kidstypike wrote:
> You don't download any file. If you follow the instructions in the link,
> the correct LMS version is downloaded and installed for you!
should i wtite 7.9.4 instead of 7.9.3?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
--
nervoteso wrote:
> yes sure putty.
>
> which file should i download there are tons.
>
> i've probls with lms on raspb many times i've to reset server to play
> music. could i resolve with 7.9.3?
You don't download any file. If you follow the instructions in the link,
the correct LMS version i
kidstypike wrote:
> You mean Putty?
>
> Follow the instructions here:
> https://docs.picoreplayer.org/how-to/upgrade_lms/
yes sure putty.
which file should i download there are tons.
i've probls with lms on raspb many times i've to reset server to play
music. could i resolve with 7.9.3?
T
nervoteso wrote:
> i tryo to install it by pitty.
>
> where's the link to lms 7.9.3 for picoreplayer?
You mean Putty?
Follow the instructions here:
https://docs.picoreplayer.org/how-to/upgrade_lms/
*Server - LMS 8.0.0 *Pi4B 4GB/Flirc case/pCP 6.1.0 - 74K library,
playlists & LMS cache on S
i tryo to install it by pitty.
where's the link to lms 7.9.3 for picoreplayer?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=3
Man in a van wrote:
> make a new image, I guess :confused:
>
> It might also depend on which pCP version you are using
6.0.0-b6
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile
make a new image, I guess :confused:
It might also depend on which pCP version you are using
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/sh
Hello
i'm on 7.9.2 on picoreplayer how can update to 7.9.3 without linux
commands?
thanks
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.ph
djdj wrote:
> Can I ask how you got access to 7.9.1 with "only" a DS115J? I have a
> DS218+ and I don't see LMS 7.9.1 as an option.
Just activate the beta channel in DSM Package Center.
-DS718+, RPI 2 ('Spotifyd'
(https://github.com/Spotifyd/spotifyd)/'myMPD'
(https://jcorporation.github.io/
deckeda wrote:
> Thank you both.
>
> It's a lowly DS115j (so, only a 800Mhz Armada 370 and 256MB of RAM). For
> me, it's mostly a glorified external hard disk, as I have nearly all
> services and functions disabled.
>
> Installed 7.9.1 via the beta channel.
>
> The initial scan from a few da
kidstypike wrote:
> Maybe here:
> http://htmlpreview.github.io/?https://github.com/Logitech/slimserver/blob/public/8.0/Changelog8.html
perfect
atca's Profile: http://forums.slimdevices.com/member.php?userid=56880
View th
atca wrote:
> where can I find about difference between v7.9.x and v8.x ?
>
> Is there a summary of what v8 sets out to do / offer ?
Maybe here:
http://htmlpreview.github.io/?https://github.com/Logitech/slimserver/blob/public/8.0/Changelog8.html
*Server - LMS 8.0.0 *Pi4B 4GB/Flirc case/pCP
where can I find about difference between v7.9.x and v8.x ?
Is there a summary of what v8 sets out to do / offer ?
atca's Profile: http://forums.slimdevices.com/member.php?userid=56880
View this thread: http://forums.slim
bernreddy wrote:
> How could I possibly go wrong?
It's hard to go wrong, as piCorePlayer is so simple to use. Glad it's
working for you.
*Home:* VBA 4TB (2.5) -or- rPi4B/pCP6.0/4TB>LMS 7.9.3>Transporter,
Touch, Boom, Radio (all ethernet)
*Cottage:* VBA 3TB (2.4) -or- rPi4B/pCP6.0/4TB>LMS 7.
mherger wrote:
> >
> I usually recommend using piCorePlayer in situations like yours. Because
>
> it's super simple. No command line experience should be required.
>
> --
>
> Michael
I'm now the proud owner of a Raspberry Pi 4, with one microSD card
booting to the Raspberry Pi OS (no good
mherger wrote:
> >
> That's way too much. No need for the disk, nor hub. Just leave the files
>
> on the NAS. The NAS is designed to serve files. Set up LMS on the Pi,
> mount the NAS to it, and scan the library from the NAS directly. I've
> been doing this with a ReadyNAS Duo v2 for a while
2. I've also started to consider the Raspberry Pi route, to the point
that over the last few days I've been looking at what would be involved.
For something like $200 or a little more, I can get: a Raspberry Pi 4
kit (without USB mouse or keyboard--I have extras) with enclosure, power
supply, 4GB
bernreddy wrote:
> 1. I've started to consider updating the OS on my ancient ReadyNAS (from
> RAIDiator 4.x to ReadyNAS OS 6.x). My understanding is that this is
> feasible but not officially supported by Netgear, and it requires a full
> wipe of my two NAS volumes (not really a big deal for me,
mherger wrote:
>
> ...
> I think I should phase out support for those old ReadyNAS models, tbh.
> Lack of IO::Socket::SSL they'll be useless with music services or even
> radio stations who all start to stream over https - not to mention that
>
> those NAS devices all must have a certain age
You are correctly skeptical of my ability to follow instructions. In my
attempt with LMS 8.0.0, I think I did things right. I tried again:
Don't worry, I'm struggling myself. My ReadyNAS is back in the office -
where I haven't been for... weeks. Thus I can't test what I suggest.
If you have
mherger wrote:
> > 22 lines [uninformative] for 8.0.0, but really only 3 different ones:
> > squeezeboxserver_safe started.
>
> Did you apply the change I suggested a few postings up?
>
> --
>
> Michael
You are correctly skeptical of my ability to follow instructions. In my
attempt with LMS
22 lines [uninformative] for 8.0.0, but really only 3 different ones:
squeezeboxserver_safe started.
Did you apply the change I suggested a few postings up?
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.sl
mherger wrote:
> > The only things I can figure out from this: (1) Confirmation that the
> > AirPlay bridge isn't working; (2) I'm glad I'm not trying to use
> > Spotify; and (3) I'm glad I'm not trying to use Rhapsody.
>
> I'd recommend you get rid of all non-functional and unused plugins
> b
The only things I can figure out from this: (1) Confirmation that the
AirPlay bridge isn't working; (2) I'm glad I'm not trying to use
Spotify; and (3) I'm glad I'm not trying to use Rhapsody.
I'd recommend you get rid of all non-functional and unused plugins
before moving to LMS8. But that's p
mherger wrote:
> >
> Now use WinSCP to navigate to /etc/default. There you'd edit the file
> squeezeboxserver to add "--d_startup" to the SLIMOPTIONS. Restart LMS.
>
> When done, navigate to /c/.squeezeboxserver/log to grab a copy of
> server.log. Post here or upload to
> https://www.dropbo
I upgraded to 8.0 this morning but then noticed several plugins were
disabled as incompatible - all from bpa - CDplayer, iHeartRadio,
Realplayer and a couple others. Downgraded to the latest 7.9.3 build
for now.
spt87a's
I'm game. Yesterday I enabled SSH on my NAS (well, the NAS management
software says I did; my recent experiences with LMS on my NAS make me
skeptical). I then figured out how to fire up the command line OpenSSH
client on Win10 and burst out laughing. I was reminded of my first days
of taking high-
Progress of a sort.
(1) I succeeded in installing PuTTY, managed to log in as "root", and
got a command line on my NAS. Didn't know what to do with it, but I was
there
(2) I succeeded in installing WinSCP, managed to log in as "root", and
got a window looking at the file tree of my NAS.
Small s
I'm game. Yesterday I enabled SSH on my NAS (well, the NAS management
software says I did; my recent experiences with LMS on my NAS make me
skeptical). I then figured out how to fire up the command line OpenSSH
client on Win10 and burst out laughing. I was reminded of my first days
of taking high
I hoped you'd modify a configuration file using vi, one of the most
newbie unfriendly text editors. Then restart LMS and copy the resulting
server.log out there. How do you feel?
Or maybe he could use WinSCP?
Heh... not using Windows I sometimes forget the obvious solutions.
Thanks for the hi
mherger wrote:
> I hoped you'd modify a configuration file using vi, one of the most
> newbie unfriendly text editors. Then restart LMS and copy the resulting
>
> server.log out there. How do you feel?
>
Or maybe he could use WinSCP?
rescue/repair. If I need to enable SSH, I can do so--Netgear offers an
"Enable Root SSH Access" add-in. What do you have in mind?
I hoped you'd modify a configuration file using vi, one of the most
newbie unfriendly text editors. Then restart LMS and copy the resulting
server.log out there. Ho
I've never tried to set up SSH on my Netgear NAS, because I don't trust
myself; I've essentially no experience with Linus, other than once every
5 years or so booting my Windows machine(s) (using removable media) for
rescue/repair. If I need to enable SSH, I can do so--Netgear offers an
"Enable R
"logitechmediaserver-8.0.0-1590233071-i386-readynas.bin" claims (in the
Are you able to SSH to your NAS?
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter
mherger wrote:
> > I've been running LMS for years on a Netgear ReadyNAS Ultra Pro (and
> on
>
> What package did you install?
>
> > a Windows desktop). I decided to update both devices from 7.92 to 8.0
> or
> > at least 7.93. Everything went fine for the update on Win10 to LMS
> 8.0.
> > On th
I've been running LMS for years on a Netgear ReadyNAS Ultra Pro (and on
What package did you install?
a Windows desktop). I decided to update both devices from 7.92 to 8.0 or
at least 7.93. Everything went fine for the update on Win10 to LMS 8.0.
On the NAS, 8.0 (and later 7.93) ran into the s
I've been running LMS for years on a Netgear ReadyNAS Ultra Pro (and on
a Windows desktop). I decided to update both devices from 7.92 to 8.0 or
at least 7.93. Everything went fine for the update on Win10 to LMS 8.0.
On the NAS, 8.0 (and later 7.93) ran into the same problem: the install
would see
mherger wrote:
> Thanks philippe_44 for your persistence!
>
> New builds should be available now.
>
> --
>
> Michael
Updated to the latest LogitechMediaServer-7.9.3-1590229251.exe earlier
today and is working great including all My Apps.
Many thanks!
---
Thanks philippe_44 for your persistence!
New builds should be available now.
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter
It seems that it is my bad when I tried to add non-blocking SSL sockets
on Windows as well (it has been on all system expect Windows for a
while). I was on the right track but Windows always have an extra trick
to bit you in the butt. I was able to reproduce the issue on my Windows
machine and I'
mherger wrote:
> > If I click on app gallery I see
>
> Is there an App Gallery item in the web UI?
>
> --
>
> MichaelYes in the web UI the only thing under My Apps is App Gallery.
Sent from my Pixel 3a using Tapatalk
--
mherger wrote:
> >> I can confirm that I see the same. I am surprised no one else has
> >> reported it.
> >>
> >> Sent from my Pixel 3a using TapatalkIf I click on app gallery I see
> > Blocked by X-Frame -Options Policy
> > An error occurred during a connection to www.mysqueezebox.com
> > Firef
If I click on app gallery I see
Is there an App Gallery item in the web UI?
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter
I can confirm that I see the same. I am surprised no one else has
reported it.
Sent from my Pixel 3a using TapatalkIf I click on app gallery I see
Blocked by X-Frame -Options Policy
An error occurred during a connection to www.mysqueezebox.com
Firefox prevented this page from loading in this con
slartibartfast wrote:
> I can confirm that I see the same. I am surprised no one else has
> reported it.
>
> Sent from my Pixel 3a using TapatalkIf I click on app gallery I see
Blocked by X-Frame -Options Policy
An error occurred during a connection to www.mysqueezebox.com
Firefox prevented th
Tuneman wrote:
> Updated to LogitechMediaServer-7.9.3-1589867173.exe on Widows 10 and
> could not access My Apps. Went back to
> LogitechMediaServer-7.9.3-1588164984.exe and My Apps worked perfectly.
> Other versions of 7.9.3 and 7.9.2 I have used did not have any problems
> with My Apps. This i
Updated to LogitechMediaServer-7.9.3-1589867173.exe on Widows 10 and
could not access My Apps. Went back to
LogitechMediaServer-7.9.3-1588164984.exe and My Apps worked perfectly.
Other versions of 7.9.3 and 7.9.2 I have used did not have any problems
with My Apps. This is the only time I have had
Synolog packages:
https://forums.slimdevices.com/showthread.php?111876-LmsUpdate-and-LmsRepack-Synology-8-0-*-packages
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezec
So will there be anymore updates to 7.9.x?
Or will the fixes and improvements only be added to 8.x from now on?
Latest changes to 7.9.3 were applied a day or two ago. Important fixes
still go there.
--
Michael
___
Squeezecenter mailing list
Squeeze
So will there be anymore updates to 7.9.x?
Or will the fixes and improvements only be added to 8.x from now on?
HumanMedia's Profile: http://forums.slimdevices.com/member.php?userid=44865
View this thread: http://forums.sl
Thanks for continuing to improve LMS. I am trying to download LMS 8.0 to
my Synology DS-713+ which currently runs LMS 7.9.1 which was installed
from the Synology package center. I cannot figure out which file to
download. The Synology NAS requires packages with the .pkg file
extensions? I tried t
1 - 100 of 142 matches
Mail list logo
