e wrote:
>
> Hi,
>
> After three or four days installed Squid 2.5.STABLE3, I've got following
> message. but server was running OK.
> Has any one had same experience? what is this all about?
>
> ==
> You've encountered a fatal error in the Squid Cache versio
On Wednesday 20 August 2003 07.34, Vladimir wrote:
> This is 2.4 Stable 7
Then you should consider upgrading.
Regards
Henrik
This is 2.4 Stable 7
I will try out what you suggest.
Vladimir
--- Henrik Nordstrom <[EMAIL PROTECTED]> wrote:
> On Tuesday 19 August 2003 11.41, Vladimir wrote:
> > Hi Henrik,
> >
> > Well, i notice something different behaviour. Here
> is
> > cache.log extract:
> >
> >
I am having trouble getting delay pools to work with ident...
I am running Squid-2.5.STABLE3 on OpenBSD 3.3
Clients are running Windows 98 with Identd
(from identd.sourceforge.net)
I have the following in my squid.conf
acl allowed_hosts src 10.0.0.0/24
acl good_guys ident_regex -i laerer
acl ba
On Wed, 2003-08-20 at 13:02, Jim Flowers wrote:
> Thanks, that's very clear. I can do the rewriting OK. What I can't figure
> out is what directive(s) I use to accomplish "forwarded using FTP to the FTP
> server" as I thought that was the function of cache_peer originserver. How
> do I tell s
Thanks, that's very clear. I can do the rewriting OK. What I can't figure
out is what directive(s) I use to accomplish "forwarded using FTP to the FTP
server" as I thought that was the function of cache_peer originserver. How
do I tell squid where the ftp server is (not on the same host) and
>Now I am having errors show up in my log saying I am running on of file
>descriptors.
Using ulimit (or its equivalent), set the hard and soft limits both
before compiling and before running Squid.
This has been recently discussed on the list (today, I think), and
also several times in the arch
Hello Jim,
I tried debug. I found the lines where I get the 400 error but I don't see
anything in the log from top to bottom that says anything about errors. Any
ideas of something else I can try? Somethink that I might be looking for?
Serge.
- Original Message -
From:
To: "Serge Paqu
Hi,
After three or four days installed Squid 2.5.STABLE3, I've got following
message. but server was running OK.
Has any one had same experience? what is this all about?
==
You've encountered a fatal error in the Squid Cache version
2.5.STABLE3-20030709.
If a
Henrik Nordstrom wrote:
> On Tuesday 19 August 2003 12.30, cc wrote:
>
>
>>acl noie browser -i MSIE
>>deny_info ERR_NOIE noie
>>http_access deny noie
>>
>>The above, when uncommented makes squid throw a
>>segmentation fault. When I recomment the three
>>lines, Squid works fine.
>
>
> Probably
With wbinfo -a, did you see both a plain text and challenge
response reply?
Here's the exact result I from wbinfo -a and wbinfo -t
# ./wbinfo -a mydomain\\myuser%mypass
plaintext password authentication succeeded
challenge/response password authentication succeeded
#./wbinfo -t
Secret is good
Doe
Hi all,
Came in this morning to find my Squid shutdown and many references to the following
in the logs, I have no idea what is causing this or even if they are related.
We are using NTLM authentication and are not experiencing any problems that have
been brought to my attention.
Squid -v gives:
S
Squid is coreing frequently now (every few minutes). This is a
2.5STABLE3 on RH 7.2 for s/390.
This GDB was configured as "s390-redhat-linux"...
(no debugging symbols found)...
Core was generated by `(squid) -D'.
Program terminated with signal 6, Aborted.
Reading symbols from /lib/libcrypt.so.1..
I have finally managed to get WCCPv2 working on my box. Works great.
Now I am having errors show up in my log saying I am running on of file
descriptors.
I have checked my /proc/sys/fs/file-max and /proc/sys/fs/inode-nr files and
they both are set pretty high. When I check the cachemgr runtime
On Tuesday 19 August 2003 21.57, Ampugnani, Fernando wrote:
> Henrik,
> which is the best way to restrict all sites that go to internet in
> the second squid box except those I permit?
By only allowing access in http_access to the sites you permit.
> I must do they in first squid box or in
You must use a few configuration parameters on squid.conf that tells
squid it is suppposed to run in 'trasparent' mode.
I am not very familiar myself with squid but I know these options are
fairly well documented inside the squid.conf file.
Regards,
Alvaro Figueroa
-Mensaje original-
De
We changed squid to start as squid so we could try to get a core for a
different problem, but we've been seeing this one once or twice a day:
In /var/log/messages I get:
(squid): authenticateNTLMHandleReply: called with no result string
squid[PID]: Squid Parent: child process PID exited due to si
On Tuesday 19 August 2003 19.42, Ampugnani, Fernando wrote:
> When I go for Internet through second squid box, first squid box
> ask me user and password and don´t give access.
See the cache_peer directive on the second Squid..
Regards
Henrik
--
Donations welcome if you consider my Free Squid
On Tuesday 19 August 2003 19.07, Jim_Brouse/[EMAIL PROTECTED]
wrote:
> Is it possible for some reason that squid split the acccess.log
> file so now i need to cat them together?
Squid never splits the access.log.
What Squid may do is to rotate access.log into access.log.1,
access.log.2, access
On Tuesday 19 August 2003 17.06, Reuben Pearse wrote:
> I was wondering if I could stick Squid in front of the Domino box
> in httpd-accelerator mode, and use it to modify the HTTP Headers
> and tell static content not to expire.
There is no configuration support for this, but if you know a littl
On Tuesday 19 August 2003 12.30, cc wrote:
> acl noie browser -i MSIE
> deny_info ERR_NOIE noie
> http_access deny noie
>
> The above, when uncommented makes squid throw a
> segmentation fault. When I recomment the three
> lines, Squid works fine.
Probably this:
http://www.squid-cache.org/Versio
On Tuesday 19 August 2003 08.02, jonathan soong wrote:
> I was wondering, in general, do proxies always support Basic, and
> sometimes support NTLM?
Basic is part of the HTTP standard and is usually supported by all
HTTP related software.
NTLM is a Microsoft invention, violating important aspec
On Tuesday 19 August 2003 05.18, Nont Banditwong wrote:
> I use squid-2.5.STABLE3 and WCCPv2 and ISO 12.0(25)
> I've look into wccpv2.c it seem like WCCPv2 is not
> fully implemented, right ?
Probably right. It was not last time I looked and I have not heard of
any WCCPv2 related development in
On Tuesday 19 August 2003 03.00, Fajar Priyanto wrote:
> Hello guys,
> I'm sorry for putting this question on the list because it's
> related to squidGuard more than squid I think. Or both.
>
> 1. Can windowsupdate.microsoft.com be denied rather than
> redirected?
Being a redirector squidGuard can
On Tuesday 19 August 2003 03.01, Arief Kurniawan wrote:
> I did winbinfo -t and winbind -a domain\\username%password. It
> seems okay. Still can't figure out what I've been missing here.
Did wbinfo -t indicate that challenge/response was OK?
> Is these steps still required before joining domain (
On Tuesday 19 August 2003 18.50, Sergio Alonso wrote:
> - My access.log doesn't log requests from other computers (only
> from localhost) , also i always restart my computer after making
> any changes to squid.conf. From red hat linux 9 installation i set
> up firewall configuration to maximum,
On Tuesday 19 August 2003 16.21, Arias, Sebastian Alejandro - (Ext
Arg) wrote:
> Could you give me some help to use the squid_ldap_auth? ... -I
> tried with this before but I didn't succeed, that's why I'm using
> ldap_auth-
>
> CN=user name,OU=it,OU=sys,OU=user accounts,dc=ar,dc=domain,dc=com
sorry for trolling, but i also thought out about another argument,
as squid would download one file via different mirrrors/gateways , thus via different
connections, it would increase security of file transfers.
it would be great if such solution would be possible also for https documents.
On Tuesday 19 August 2003 11.41, Vladimir wrote:
> Hi Henrik,
>
> Well, i notice something different behaviour. Here is
> cache.log extract:
>
> ---
> 2003/08/19 17:16:54| TCP connection to 127.0.0.1/8000
> failed
> 2003/08/19 17:16:54| Detected DEAD Pare
Hi all:
I have two squid box the first for Internet (this use smb_auth) and
the second for intranet (don´t use validation). I need redirect the traffic
in the second squid box when this go for internet to first squid box.
I put the following rules in the squid conf. file of second squid bo
On Tuesday 19 August 2003 07.03, [EMAIL PROTECTED]
wrote:
> I am looking to have Squid 2.5 authenticate connection requests
> against a Novell eDirectory 8.62 server. A neat solution from my
> point of view is to configure Squid to use the supplied LDAP
> helper, across SSL.
Which the supplied
Try this but be do not leave debug on too long just long enough to test why
it is failing. debug is very verbose
> My access.log doesn't log requests from other computers
Then the other computers aren't connecting to Squid.
> From red hat linux 9 installation i set up firewall
> configuration to maximum
This config doesn't allow any outside connections to the
machine. You need to set an exception for Squid
On Tuesday 19 August 2003 02.04, Jim Flowers wrote:
> Did I then misunderstand your earlier response, to wit:
>
> "What is possible is to set up http access to the content of the
> FTP server via a redirector rewriting the accelerated URLs to
> ftp://, but you can not connect to Squid using FTP."
>
I think I might have found part of the problem. I have a access.log file
for that date that is 514 megs and I also have a bk.access.log file for
that date that is only 150 megs. The two files are only separated by
Is it possible for some reason that squid split the acccess.log file so now
i nee
On Monday 18 August 2003 22.20, Sergio Alonso wrote:
> Can't get my network users to access squid. My acl's configuration
> looks like this:
Configuration looks fine.
What do you get in access.log? And have you restarted Squid after
making the configuration changes?
Regards
Henrik
- My access.lo
Hello,
I am getting a bunch of messages like:
clientReadRequest: FD 89 Invalid Request
in my log file. Also I have people complaining that they cannot for
example log into myEbay at .ebay.com. They get a 400 error from
Squid.
I am using WCCP and have squid running as a transparent proxy.
[EMAIL PROTECTED] wrote:
Joe
Just a note, as requested at http://www.squid-cache.org/binaries.html, to
thank you for providing the RedHat RPMs and a cc to the list to say
thank-you to the project team for Squid. Really mean that. Brilliant
software!
I'm happy they have been useful for you
Dear All,
I am having problem with my squid box since i
updated my kernel to "2.4.20-19.8smp" , actually it is
running as a squid cache on my network and serving 360
users at maximum , the specs are
80 Gb scsi storage
dual intel PIII
1 GB ram
but it behaves abnormally some times it tart
generati
Rully Budisatya wrote:
>
> Hi,
>
> I probably did something wrong with my squid.
> The proxy seems to have no 'HIT' whatsoever, it continues to give me only
> MISSES.
> Can somebody tell me what happened ?
Depending on methodologies used (aka browser reload) ,this may leed
to this unwanted (
Hi all,
Is it possible, using Squid, to modify the HTTP Headers of an object
when in httpd-accelerator mode. We have a Domino Web server that tells
clients browsers that GIFS, CSS, JS and other static files to "expire
immediately", so that copies of these files are sent to the client over
and over
> The proxy seems to have no 'HIT' whatsoever, it continues
> to give me only MISSES.
Post your squid.conf (without blank lines or comments).
Adam
Hi,
I probably did something wrong with my squid.
The proxy seems to have no 'HIT' whatsoever, it continues to give me only
MISSES.
Can somebody tell me what happened ?
Thanks.
...
Rully
> I did winbinfo -t and winbind -a domain\\username%password.
> It seems okay.
Please don't say "it seems okay", because that doesn't
tell us anything useful. You're much better off posting the
exact comman line used and the exact output given. (Changing
the username and password in the post is ok
> I am recieveing a Connection Failed: (101) Network Unreachable
> error after i successfully authenticate vs AD
Can you browse from a workstation if you don't use Squid?
Have you tried using Squid's client program from the command line
on the Squid server?
Also, post your squid.conf (without an
Hello,
I am new to Squid and I'd like to use it as a simple cache proxy
server for web browsing.
We use a Sonicwall appliance for firewalling, and we'd like to use the
"Proxy Web Server" option of Sonicwall.
This option performs automatic proxy forwarding of all web requests
coming from t
Ladies and Gents,
I am recieveing a Connection Failed: (101) Network Unreachable error after i
successfully authenticate vs AD.
If i dig from the server to a website i recieve a positive response.
If i ping a network IP i get a pisitive repsonse. I have bound Squid to eth1
and when i do a port
> If I'm going to implement for 500 Users , how many
> ntlmauthenticator processes I should specify in
> squid.conf
Hard to say - each individual setup is different.
The general rule of thumb is one NTLM auth helper for
each user.
At the same time, our network has over 20 concurrent users
and we
> I was wondering, in general, do proxies always support
> Basic, and sometimes support NTLM?
Squid supports both basic and NTLM authentication. This
is the Squid mailing list, so information about other
proxies will either be limited or non-existant.
> Or can you get pure NTLM-only proxies?
Squ
Hello Developers,
I am new to this list.I am involving in the Epoll development in Squid-3.0
on Ia64 Platform.I have compiled the squid-3.0-pre3 with
configure options:
'--prefix=/usr/local/squidbug' '--enable-epoll' '--disable-poll'
'--disable-select' '--disable-kqueue' '--enable-
Hi,
I'm new to this list. I'm using Squid 2.5STABLE3 on
a Linux 2.4.21 system running Apache 2.x.
As this is a test phase, I figured I'd test out the acl
parameters. I've encountered a strange problem. Perhaps
someone out there might be able to figure it out.
acl noie browser -i MSIE
deny_inf
ODHIAMBO Washington wrote:
* Rohit Nepali <[EMAIL PROTECTED]> [20030819 12:20]: wrote:
Hi,
We have set up transproxy in freebsd-4.8. using squid-2.4.STABLE7.
We are using alteon switch to redirect webtraffic. We have other 5 squid
transproxies running on Redhat 6.2. In the FreeBSD m
Hi Henrik,
Well, i notice something different behaviour. Here is
cache.log extract:
---
2003/08/19 17:16:54| TCP connection to 127.0.0.1/8000
failed
2003/08/19 17:16:54| Detected DEAD Parent:
127.0.0.1/8000/0
2003/08/19 17:17:27| Failed to select source
Hi,
We have set up transproxy in freebsd-4.8. using squid-2.4.STABLE7.
We are using alteon switch to redirect webtraffic. We have other 5 squid
transproxies running on Redhat 6.2. In the FreeBSD machine I'm getting
lots of TCP_CLIENT_REFRESH_MISS messages in access.log. However there
isn't a
Hi!
I'm using wb_ntlm_auth and wb_group and all works fine with W2k AD
Try to start winbindd -n to disable winbind caching and set ttl=5, but it's
not necessary.
- Original Message -
From: "Henrik Nordstrom" <[EMAIL PROTECTED]>
To: "Alex Carlos Braga Antão" <[EMAIL PROTECTED]>;
<[EMAIL P
Dear friends.
Probobly it is one of the best ways that we block strange IP addresses bye
using a firewall on the layer 3 of our stream.
But bye doing this one then you can be sure that no one out of your LAN can
use your cache server.
And one thing else, when you are configuring squid it would be
56 matches
Mail list logo