Happy Birthday, Chris!
Bao
--
Best Regards.
Bao C. Ha
Hacom - Embedded Systems and Appliances
http://www.hacom.net
voice: (714) 564-9932
On Tue, Aug 9, 2011 at 9:33 AM, Tim Dickson wrote:
> > About a year ago, I switched to running the full pfSense 2.0 (beta
> something at the time) on a Kingston SS100S2/8G embedded SSD.
>
> I installed the 30G version in 12 systems, all of which failed within 6
> months. I moved to Intel 320s and
Hello,
We are trying to build the pfSense 2.0. However, the process hangs around
the following message:
>>> Fetching BSDInstaller using CVSUP...
It seems that cvs.bsdinstaller.org keeps timeout. The work-around is to
patch the builder_common.sh to use GIT instead of CVSUP.
Is there a change in
Hi Seth,
On Mon, Mar 7, 2011 at 12:05 AM, Seth Mos wrote:
> Op 6-3-2011 23:26, Bao Ha schreef:
>
> Hi Bart,
>>
>> Thanks for the note.
>>
>> According to the forum, it should not be a problem. :-(
>>
>
> It is not.
I have had three systems with
cause. And I can stop a flood of support
issues.
Bao
On Sun, Mar 6, 2011 at 2:12 PM, Bart Grefte wrote:
> Someone already made a bugreport http://redmine.pfsense.org/issues/1279
> ;)
>
>
>
>
> ----------
>
> *Van:* Bao Ha [mailto:b...@hacom.n
Something happened in BETA5 and it was carried into RC1, up to today
snapshot: 20110306-0859.
The file system in nanobsd version is now mounted fully RW, see the
following "mount" command:
...
[2.0-RC1][admin@pfHacom.localdomain]/root(1): mount
/dev/ufs/pfsense0 on / (ufs, local)
devfs on /dev (d
On Fri, Dec 17, 2010 at 7:52 AM, mehma sarja wrote:
> On a test system running on an Atom D323(?) - removed the cover and
> unplugged the psu fan. Good so far. The IR gun shows a psu temp of around
> 97 deg F and stable. There are two small case fans - one of them has a plug
> on the MB that is no
On Thu, Dec 16, 2010 at 7:19 PM, Bruce B wrote:
...
> P.S. If this an Atom board/Intel CPU, how come there are 6 NIC ports on
> them? Have you guys pried open one of these?
It depends on the chipset. An ICH9M has 6 x PCIe ( x1) plus a Gigabit
controller.
So you can have 6 x Gigabit Ethernet plus
Hi Chris,
We have the following technical issues from Neil Cassarchis. They
bought two (2) of our 1u server loaded with pfSense 1.2.3 and trying
to establish OpenVPN connections between them.
Could you address their problems? Should I log in to the portal first
and create a support ticket?
Neil'
Just want to throw another data point into this confusing discussion.
The low-end Cisco ASA 5505 requires VLAN configuration since it is
just a switch.
The Cisco ASA 5510 has four Ethernet ports. If you need more, just use VLAN.
Perhaps, Cisco is expecting a firewalled network to use managed
swi
an a Soekris or the like,
> that's why I went with it.
>
> Thanks
>
> On Thu, Apr 15, 2010 at 2:17 PM, Bao Ha wrote:
>> Hi Charles,
>>
>> Padlock does not have an issue that we know of! We have sold hundreds
>> of VIA C7 systems with Padlock running pfS
s known issues, is there anything that can be done?
>
> Thanks
> Charles
>
> On Thu, Apr 15, 2010 at 11:55 AM, Bao Ha wrote:
>> To check for Padlock, just look at the FreeBSD boot up messages.
>>
>> #dmesg | grep "Padlock"
>>
>> Are you running t
To check for Padlock, just look at the FreeBSD boot up messages.
#dmesg | grep "Padlock"
Are you running the 1.5Ghz VIA C7 fanless? If it takes sometimes to
crash, it could be a heat problem. I would check the CPU fan and
ventilation of the enclosure.
On Thu, Apr 15, 2010 at 9:49 AM, Charles Gol
On Tue, Jan 5, 2010 at 9:15 AM, David Newman wrote:
> On 1/5/10 9:11 AM, Bao Ha wrote:
> >
> > On Tue, Jan 5, 2010 at 8:59 AM, Scott Ullrich > <mailto:sullr...@gmail.com>> wrote:
> >
> > On Tue, Jan 5, 2010 at 11:02 AM, David Newman
> &g
On Tue, Jan 5, 2010 at 8:59 AM, Scott Ullrich wrote:
> On Tue, Jan 5, 2010 at 11:02 AM, David Newman
> wrote:
> > Greetings. I'd welcome recommendations for which pfSense image to
> > install on this system, which currently runs OpenBSD:
> >
> > Nexcom 1563
> > VIA 667-MHz CPU
> > 512 Mbytes RAM
15 matches
Mail list logo
