how to reset or re program this part item s29gl064n90tf103.. can you please
help me
thanks
vic
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi, Stefano,
On Sat, Oct 8, 2011 at 6:07 PM, Stefano Babic sba...@denx.de wrote:
Switch to new pmic generic driver.
Signed-off-by: Stefano Babic sba...@denx.de
CC: Jason Liu jason@linaro.org
---
board/freescale/mx53evk/mx53evk.c | 15 +--
include/configs/mx53evk.h
Hi Marek,
it's hard to evaluate each piece by itself when it's just one patch
smooshing it all together
Well how would you rework crap code piece by piece?
- fix style
- abstract out stuff
Not like there was so much abstraction it couldn't be squashed into this one.
- add new
On 10/07/11 02:28, Tom Rini wrote:
On Tue, Oct 4, 2011 at 7:59 AM, Tom Rini tr...@ti.com wrote:
Hey all,
The following short series does two things. First, it re-works where
we do memory initalization in SPL for OMAP3 to be board-specific.
This is needed since in many cases (beagleboard,
Hi Joe,
On 10/06/11 23:50, Joe Hershberger wrote:
Enable the gpio command
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Sandeep Paulraj s-paul...@ti.com
---
Changes for v2:
- Correct a bad merge... sorry.
Hi Mike,
On 07.10.2011 21:34, Mike Frysinger wrote:
+#ifdef DAVINCI_EMAC_DCACHE
+static inline void davinci_flush(void *addr, int size)
+{
+flush_dcache_range((unsigned long)addr,
+(unsigned long)addr + size);
+}
+
+static inline void davinci_invalidate(void *addr,
On Sunday, October 09, 2011 11:01:36 AM Remy Bohmer wrote:
Hi Marek,
it's hard to evaluate each piece by itself when it's just one patch
smooshing it all together
Well how would you rework crap code piece by piece?
- fix style
- abstract out stuff
Not like there was
On Sun, Oct 09, 2011 at 02:41:47PM +0400, Ilya Yanok wrote:
arm926ejs doesn't have {invalidate,flush}_dcache_range(), so we have to
add this not to break the driver on DaVinci boards (maybe we need to add
empty cache functions on arm926ejs instead?)
Even better would be working cache
On Sunday 09 October 2011 06:41:47 Ilya Yanok wrote:
On 07.10.2011 21:34, Mike Frysinger wrote:
+#ifdef DAVINCI_EMAC_DCACHE
+static inline void davinci_flush(void *addr, int size)
+{
+ flush_dcache_range((unsigned long)addr,
+ (unsigned long)addr + size);
+}
+
On Saturday 08 October 2011 20:20:47 Pali Rohár wrote:
On Thursday 01 September 2011 09:57:13 you wrote:
On Thursday, September 01, 2011 07:34:29 Pali Rohár wrote:
--- /dev/null
+++ b/board/nokia/rx51/rx51.c
+GraphicDevice gdev;
no camel case
GraphicDevice is defined in
On Saturday 08 October 2011 19:29:27 Pali Rohár wrote:
On Thursday 01 September 2011 09:58:06 you wrote:
On Thursday, September 01, 2011 07:34:30 Pali Rohár wrote:
board/nokia/rx51/rx51.c |7 +++
include/configs/nokia_rx51.h |1 +
this is a new board port. why not
Dear Kumar Gala,
In message 9c8cc940-a952-4323-8a48-bd6fb389a...@kernel.crashing.org you wrote:
total: 0 errors, 1 warnings, 50 lines checked
I don't agree with this checkpatch warning. The extra space adds to =
readability so leaving this alone.
Indentation must be done by TABs.
Dear Kumar Gala,
In message alpine.lfd.2.00.1110071105270.5...@right.am.freescale.net you
wrote:
The following changes since commit 08e4f700ac450ddc5d4819e23df5bc46eb767464:
Marek Vasut (1):
SPL: Make path to start.S configurable
are available in the git repository at:
Dear Stephen Warren,
In message 74cdbe0f657a3d45afbb94109fb122ff173b23b...@hqmail01.nvidia.com you
wrote:
But please define first bank - does it mena the firs one
initialized, or the lowest start address, or the lowest chip select,
or ... ?
It's the following currently:
On Sunday, September 25, 2011 07:25:07 PM Jana Rapava wrote:
Signed-off-by: Jana Rapava ferma...@gmail.com
Cc: Marek Vasut marek.va...@gmail.com
Cc: Remy Bohmer li...@bohmer.net
Cc: Fabio Estevam feste...@gmail.com
---
Changes for v2:
- changed to proper patch
Changes for v3:
Dear Marek Vasut,
In message 1317990657-17214-2-git-send-email-marek.va...@gmail.com you wrote:
Also, fix usb drivers which use extern new.
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Ajay Kumar Gupta ajay.gu...@ti.com
Cc: Bryan Wu bryan...@analog.com
Cc: Cliff Cai
Dear Owain,
In message 0e168e936a32d3409718ad71277afe210988085...@mchp057a.global-ad.net
you wrote:
I am trying to squeeze new features onto a uboot based system where we have
run out of flash.
In tandum with general optimisation of apps, removal of redundant code etc
I wanted to rework
Dear Michael Jones,
In message 4e8ed1ef.8020...@matrix-vision.de you wrote:
SOme previous changes added code right in the middle of the
typo- double capitalization
Thanks for pointing out.
+ bytes are output before the console is initialised, the
two spaces between 'is'
Reported-by: Michael Jones michael.jo...@matrix-vision.de
Signed-off-by: Wolfgang Denk w...@denx.de
---
README | 13 +
1 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/README b/README
index e0a4d53..c5cfb13 100644
--- a/README
+++ b/README
@@ -627,7 +627,7 @@ The
Dear Anton Staaf,
In message CAF6FioV3YFk02Sgp0AasYGQJSNKv=cb-sszcqr8f3s2esya...@mail.gmail.com
you wrote:
This is needed for the patch cache: add default setting for
CONFIG_SYS_CACHELINE_SIZE from Anton Staaf. As cache.h defines
CONFIG_SYS_CACHELINE_SIZE for PPC targets.
This will
On Sunday, October 09, 2011 08:54:07 PM Wolfgang Denk wrote:
Dear Marek Vasut,
In message 1317990657-17214-2-git-send-email-marek.va...@gmail.com you
wrote:
Also, fix usb drivers which use extern new.
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Ajay Kumar Gupta
Dear Joe Hershberger,
In message CANr=Z=y+q6aoj-+gkc+ydeapgclsaqkpczamhjcrnwts9jx...@mail.gmail.com
you wrote:
I'm attempting to make the files I touched in several recent
patch-series chechkpatch.pl compliant.
I've hit several cases which fail and probably shouldn't. For each of
these
Dear Simon Glass,
In message 1318031631-13643-2-git-send-email-...@chromium.org you wrote:
This adds required header files for the sandbox architecture, and a basic
description of what sandbox is (README.sandbox).
This commit generates a list of 44 checkpatch warnings:
This should go to the
Dear Lukasz Majewski,
In message 20111007093950.17d94287@lmajewski.digital.local you wrote:
Most warnings are related to lines over 80 characters.
This code is a debug code. As fair as I remember debug print code shall
not be break in Linux kernel for easier debugging.
Can you please point
Dear Michael Jones,
In message 4e8ec11b.8040...@matrix-vision.de you wrote:
But while we're on the topic- Most of those old warnings were because my
board/matrix_vision/mvblx/mvblx.h was based on board/ti/beagle/beagle.h,
which would've itself had lots of checkpatch warnings from long
Dear Che-liang Chiou,
In message CANJuy2LVSzvodiim096iqj2kJ3gGD4dR=9-bctO=hjm4nhf...@mail.gmail.com
you wrote:
Hi Wolfgang Denk,
I have added following comments to this call in patch V2.
+ /*+* This only clears me=
ssages on screen, not on
serial port. It is+
Dear Tang Yuantian-B29983,
In message
3c06c26914daca4bb3a368f78ca0b3a70ea...@039-sn1mpn1-005.039d.mgd.msft.net you
wrote:
Did you say the following warnings:
-
WARNING: Use #include linux/io.h instead of asm/io.h
#79: FILE: drivers/block/sata_sil.c:26:
+#include asm/io.h
We
Dear Marek Vasut,
In message 201110092112.18014.marek.va...@gmail.com you wrote:
+#undef USB_KBD_DEBUG
Please do not undef what is not defined [or what a user might want to
define on the command line].
Command line ? This is a placeholder in case the user wants to debug this
From: Stany MARCEL [mailto:stany.mar...@novasys-ingenierie.com]
Sent: Wednesday, September 14, 2011 8:44 PM
To: u-boot@lists.denx.de
Cc: Jin Zhengxiong-R64188; Jin Zhengxiong-R64188; Stany MARCEL
Subject: [PATCH 1/6] ColdFire: Cleanup lds files for multiple defined
symbols
Lds files
Dear Stefan Roese,
In message 1317985534-11135-1-git-send-email...@denx.de you wrote:
This is needed for the patch cache: add default setting for
CONFIG_SYS_CACHELINE_SIZE from Anton Staaf. As cache.h defines
CONFIG_SYS_CACHELINE_SIZE for PPC targets.
This will remove the following
Dear Stefan Roese,
In message 1317985549-11206-1-git-send-email...@denx.de you wrote:
While adding asm/cache.h to common.h for PPC targets, I got an
error about multiple definitions of some DBSR_ macros. While
scanning these defines, I noticed that some where defined not
correctly for all PPC
2011/10/9 Marek Vasut marek.va...@gmail.com
On Sunday, September 25, 2011 07:25:07 PM Jana Rapava wrote:
Signed-off-by: Jana Rapava ferma...@gmail.com
Cc: Marek Vasut marek.va...@gmail.com
Cc: Remy Bohmer li...@bohmer.net
Cc: Fabio Estevam feste...@gmail.com
---
Changes for v2:
Dear Wolfgang Denk,
In message 1317969361-24887-1-git-send-email...@denx.de you wrote:
Also rearrange IH_TYPE table slightly.
Signed-off-by: Wolfgang Denk w...@denx.de
---
common/image.c |9 +++--
1 files changed, 3 insertions(+), 6 deletions(-)
Applied, thanks.
Best regards,
Dear Che-Liang Chiou,
In message 1317980448-25774-1-git-send-email-clch...@chromium.org you wrote:
The 'time' command runs and reports execution time of commands.
Sample usage:
u-boot# time crc 0x1000 1000
CRC32 for 1000 ... 1fff == ae94dc4b
time: 0.004
Dear Wolfgang Denk,
In message 1317849453-8216-1-git-send-email...@denx.de you wrote:
Fix:
board.c:445:8: warning: variable 'bd' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk w...@denx.de
Cc: Albert ARIBAUD albert.u.b...@aribaud.net
---
arch/arm/lib/board.c
Dear Wolfgang Denk,
In message 1317849453-8216-2-git-send-email...@denx.de you wrote:
Fix:
cfi_mtd.c: In function 'cfi_mtd_init':
cfi_mtd.c:226:19: warning: variable 'mtd_list' set but not used
[-Wunused-but-set-variable]
cfi_mtd.c: In function 'cfi_mtd_init':
cfi_mtd.c:226:19: warning:
Dear Wolfgang Denk,
In message 1317849453-8216-3-git-send-email...@denx.de you wrote:
Fix:
jffs2_1pass.c: In function 'jffs2_1pass_read_inode':
jffs2_1pass.c:699:7: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
jffs2_1pass.c: In function 'jffs2_1pass_build_lists':
Dear Wolfgang Denk,
In message 1317849453-8216-4-git-send-email...@denx.de you wrote:
Fix:
smc9.c: In function 'smc_phy_configure':
smc9.c:1194:6: warning: variable 'failed' set but not used
[-Wunused-but-set-variable]
smc9.c:1190:7: warning: variable 'phyaddr' set but not used
Dear Wolfgang Denk,
In message 1317849453-8216-5-git-send-email...@denx.de you wrote:
Fix:
cmd_usb.c: In function 'usb_show_tree_graph':
cmd_usb.c:284:29: warning: variable 'port' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk w...@denx.de
Cc: Remy Bohmer
Dear Wolfgang Denk,
In message 1317849453-8216-6-git-send-email...@denx.de you wrote:
Fix:
ohci-hcd.c: In function 'dl_transfer_length':
ohci-hcd.c:968:8: warning: variable 'tdINFO' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk w...@denx.de
Cc: Remy Bohmer
Dear Wolfgang Denk,
In message 1317849453-8216-7-git-send-email...@denx.de you wrote:
Fix:
usb.c: In function 'usb_parse_config':
usb.c:331:17: warning: variable 'ch' set but not used
[-Wunused-but-set-variable]
usb.c: In function 'usb_hub_port_connect_change':
usb.c:1123:29: warning:
Dear Simon Glass,
In message capnjgz2oku0d5kzjhjnqar2zi_8y0fsp1pskpcy5gsdey1i...@mail.gmail.com
you wrote:
Sorry if I have missed a mailing list patch, but in my version of the
source there is a line a little lower down which uses bd:
mmc_initialize(bd);
Of course it can just
Dear Wolfgang Denk,
In message 1317974690-6739-1-git-send-email...@denx.de you wrote:
SOme previous changes added code right in the middle of the
description of CONFIG_SHOW_BOOT_PROGRESS. Move this text down.
Fix formatting while we are at it.
Signed-off-by: Wolfgang Denk w...@denx.de
---
Dear Wolfgang Denk,
In message 1318187362-9798-1-git-send-email...@denx.de you wrote:
Reported-by: Michael Jones michael.jo...@matrix-vision.de
Signed-off-by: Wolfgang Denk w...@denx.de
---
README | 13 +
1 files changed, 5 insertions(+), 8 deletions(-)
Applied, thanks.
Best
Dear Anton Staaf,
In message 1317763491-7274-1-git-send-email-robot...@chromium.org you wrote:
The cache line alignment issue has gone around a couple of times now. This
patch set implements all of the details that we have discussed about the
implementation of ALLOC_CACHE_ALIGN_BUFFER other
On Sun, Oct 9, 2011 at 12:11 PM, Wolfgang Denk w...@denx.de wrote:
Dear Anton Staaf,
In message
CAF6FioV3YFk02Sgp0AasYGQJSNKv=cb-sszcqr8f3s2esya...@mail.gmail.com you
wrote:
This is needed for the patch cache: add default setting for
CONFIG_SYS_CACHELINE_SIZE from Anton Staaf. As
On Sun, Oct 9, 2011 at 2:22 PM, Wolfgang Denk w...@denx.de wrote:
Dear Anton Staaf,
In message 1317763491-7274-1-git-send-email-robot...@chromium.org you wrote:
The cache line alignment issue has gone around a couple of times now. This
patch set implements all of the details that we have
Hi Wolfgang,
On Sun, Oct 9, 2011 at 12:28 PM, Wolfgang Denk w...@denx.de wrote:
Dear Simon Glass,
In message 1318031631-13643-2-git-send-email-...@chromium.org you wrote:
This adds required header files for the sandbox architecture, and a basic
description of what sandbox is
On Oct 9, 2011, at 1:34 PM, Wolfgang Denk wrote:
Dear Kumar Gala,
In message alpine.lfd.2.00.1110071105270.5...@right.am.freescale.net you
wrote:
The following changes since commit 08e4f700ac450ddc5d4819e23df5bc46eb767464:
Marek Vasut (1):
SPL: Make path to start.S configurable
From: chenhui zhao chenhui.z...@freescale.com
- Increase the size of malloc space.
- Enable e1000 network card.
- Show pci devices on startup.
- Change the location of env address.
- Use hwconfig to turn off ECC by default.
[Kumar Gala] Fixed white space formating for CONFIG_EXTRA_ENV_SETTINGS
[ fixed mpc8548cds config patch to pass checkpatch ]
The following changes since commit 0841ca90f22d73b0ea4642ef1ce33d879bb2f3ff:
Wolfgang Denk (1):
arm920t/s3c24x0/usb_ohci.c: fix warning: variable ... set but not used
are available in the git repository at:
On Sun, Oct 9, 2011 at 5:55 PM, Kumar Gala ga...@kernel.crashing.org wrote:
- Increase the size of malloc space.
- Enable e1000 network card.
- Show pci devices on startup.
- Change the location of env address.
- Use hwconfig to turn off ECC by default.
This patch is missing all of the
On Oct 9, 2011, at 6:41 PM, Tabi Timur-B04825 wrote:
On Sun, Oct 9, 2011 at 5:55 PM, Kumar Gala ga...@kernel.crashing.org wrote:
- Increase the size of malloc space.
- Enable e1000 network card.
- Show pci devices on startup.
- Change the location of env address.
- Use hwconfig to turn
Kumar Gala wrote:
* The only things not explained is the env address change. I can see
it matches our other boards MPC8572DS, etc. So not exactly critical to
me.
There's no explanation for increasing the malloc size.
* If Wolfgang wants to remove CONFIG_PCI_SCAN_SHOW so be it, but as
long
On Sunday 09 October 2011 15:28:16 Wolfgang Denk wrote:
Simon Glass wrote:
0 errors, 44 warnings for
0001-sandbox-Add-architecture-header-files.patch: warning:
arch/sandbox/include/asm/bitops.h,30: Use of volatile is usually wrong:
see Documentation/volatile-considered-harmful.txt
Tested-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Wed, Sep 21, 2011 at 1:00 PM, Linus Walleij linus.wall...@linaro.org wrote:
Albert do you want this series through patchwork or through
a git pull request?
Ping on this... I'm happy to help.
The patchwork entries are here:
http://patchwork.ozlabs.org/patch/115217/
On Monday 03 October 2011 21:10:17 Simon Glass wrote:
Hi,
On Mon, Sep 26, 2011 at 5:10 PM, Simon Glass s...@chromium.org wrote:
The dependency rules are currently done in a shell 'for' loop. This does
not permit Makefile variables to adjust preprocessor flags as is done
with normal
TPM (Trusted Platform Module) is an integrated circuit and
software platform that provides computer manufacturers with the
core components of a subsystem used to assure authenticity,
integrity and confidentiality.
This driver supports version 1.2 of the TCG (Trusted Computing
Group)
On Tuesday 04 October 2011 01:24:56 Simon Glass wrote:
On Mon, Oct 3, 2011 at 11:57 AM, Mike Frysinger wrote:
On Monday, September 26, 2011 20:10:53 Simon Glass wrote:
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
printf (\nMem error @ 0x%08X:
On Sun, Oct 9, 2011 at 2:21 AM, Igor Grinberg grinb...@compulab.co.il wrote:
On 10/07/11 02:28, Tom Rini wrote:
On Tue, Oct 4, 2011 at 7:59 AM, Tom Rini tr...@ti.com wrote:
Hey all,
The following short series does two things. First, it re-works where
we do memory initalization in SPL for
Hi Mike,
On Sun, Oct 9, 2011 at 7:50 PM, Mike Frysinger vap...@gentoo.org wrote:
On Monday 03 October 2011 21:10:17 Simon Glass wrote:
Hi,
On Mon, Sep 26, 2011 at 5:10 PM, Simon Glass s...@chromium.org wrote:
The dependency rules are currently done in a shell 'for' loop. This does
not
Hi Mike,
On Sun, Oct 9, 2011 at 7:54 PM, Mike Frysinger vap...@gentoo.org wrote:
On Tuesday 04 October 2011 01:24:56 Simon Glass wrote:
On Mon, Oct 3, 2011 at 11:57 AM, Mike Frysinger wrote:
On Monday, September 26, 2011 20:10:53 Simon Glass wrote:
--- a/common/cmd_mem.c
+++
Hi,
On Sun, Oct 9, 2011 at 6:03 PM, Mike Frysinger vap...@gentoo.org wrote:
On Sunday 09 October 2011 15:28:16 Wolfgang Denk wrote:
Simon Glass wrote:
0 errors, 44 warnings for
0001-sandbox-Add-architecture-header-files.patch: warning:
arch/sandbox/include/asm/bitops.h,30: Use of volatile
On Sunday 09 October 2011 22:53:26 Vadim Bendebury wrote:
Change-Id: I22a33c3e5b2e20eec9557a7621bd463b30389d73
these don't make sense outside of gerrit ;)
--- a/Makefile
+++ b/Makefile
+ifneq ($(CONFIG_GENERIC_LPC_TPM),)
please use:
ifeq ($(CONFIG_...),y)
--- a/README
+++
65 matches
Mail list logo
