Hi everybody,
I wonder how I can flash a ubi rootfs image into my NAND flash by using u-boot
to do this?
The doc inside u-boot doesn't show me some readme and also google doesn't have
some interesting links for me.
The online help of the ubi commands is a bit crypted - at least for me and
Am Mittwoch 04 November 2009 01:34:53 schrieb myub...@fastmail.fm:
Hi,
I am trying to define multiple partitions using mtdparts variable. But I
can't get it set automatically right.
I defined the set_bootargs as the following:
set_bootargs=setenv bootargs root=/dev/mtdblock2
Am Montag 05 Oktober 2009 16:53:24 schrieb Simon Kagstrom:
Hi all,
congratulation and many thanks for the catch :)
Dieter
U-boot for Marvell Kirkwood boards no longer work after the EABI changes
introduced in commit f772acf8a584067033eff1e231fcd1fb3a00d3d9. This
turns out to be caused by a
Hi Simon,
On Tue, 29 Sep 2009 17:16:42 +0200
Dieter Kiermaier dk-arm-li...@gmx.de wrote:
Hm, it looks like there is the whole nand system somewhat broken :(
Haven't seen it earlier, but:
U-Boot 2009.08-00208-g9ef0569-dirty (Sep 29 2009 - 15:42:42)
OpenRD_base
SoC: Kirkwood
Hi Simon, hi Prafulla,
On Wed, 30 Sep 2009 09:02:14 +0200
Dieter Kiermaier dk-arm-li...@gmx.de wrote:
arm-none-linux-gnueabi-ld: ERROR: Source object
/home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_udivsi3.o)
has EABI
Am Mittwoch 30 September 2009 09:57:10 schrieb Simon Kagstrom:
On Wed, 30 Sep 2009 09:40:07 +0200
Dieter Kiermaier dk-arm-li...@gmx.de wrote:
Sounds like you might have problems with USE_PRIVATE_LIBGCC. See this
mail for how to test this:
http://lists.denx.de/pipermail/u-boot
Am Mittwoch 30 September 2009 10:17:51 schrieb Simon Kagstrom:
On Wed, 30 Sep 2009 10:15:35 +0200
Dieter Kiermaier dk-arm-li...@gmx.de wrote:
is there anywhere a document how to build open source u-boot for
sheevaplug which explains all these details?
(haven't found some
Am Mittwoch 30 September 2009 11:28:15 schrieb Prafulla Wadaskar:
Hi Prafulla,
Hi list
We use Raw NAND/flash and copy the binary there,
After copy,
is there a way to check the flash sanity after we have burnt an image?
(e.g. by nand reading and diffing with the binary in RAM?)
Are there
Hi everybody,
I try to bring up fw_setenv / fw_printenv in linux kernel but first it want to
start with u-boot itself.
I built most recent u-boot-marvell git source and get a running u-boot with
standard openrd configuration.
So far so good.
version says:
ArtistaNET-III version
U-Boot
Am Dienstag 29 September 2009 15:55:55 schrieb Dieter Kiermaier:
Hi everybody,
I try to bring up fw_setenv / fw_printenv in linux kernel but first it want
to start with u-boot itself.
I built most recent u-boot-marvell git source and get a running u-boot with
standard openrd configuration
Hi Alessandro,
I'd prefer tout = DIV_ROUND_UP(tout*CONFIG_SYS_HZ, 1000);
Ok for me.
BTW: Looking for DIV_ROUND_UP, I found that it's defined in
./include/asm/arch-kirkwood/gpio.h as well. I was checking whether it can
be removed, but it looks like nobody is using the driver.
Am Freitag 24 Juli 2009 05:59:41 schrieb Prafulla Wadaskar:
-Original Message-
From: Dieter Kiermaier [mailto:dk-arm-li...@gmx.de]
Sent: Thursday, July 23, 2009 6:25 PM
To: u-boot@lists.denx.de
Cc: Prafulla Wadaskar; Simon Kagstrom
Subject: kirkwood openRD-base / PCI support
Hi all,
I've tried to build u-boot for sheevaplug from git.denx.de/u-boot.git
Is this expected to work or are there some missing dependencies or what am I
doing wrong?
(The same happens on u-boot-arm custodian tree. Only Prafullas tree from
git.marvell.com allows me to build u-boot for
Hi Prafulla,
-Original Message-
From: u-boot-boun...@lists.denx.de
[mailto:u-boot-boun...@lists.denx.de] On Behalf Of Dieter Kiermaier
Sent: Thursday, July 23, 2009 2:13 PM
To: u-boot@lists.denx.de
Subject: [U-Boot] kirkwood sheevaplug - broken build using
git.denx.de/u
Hi Nirav,
I am trying cp.b 2200 1010 18 (i.e. copy from RAM to FLASH)
Its showing me message flash can't Erase.
But when i tried cp.b 1010 2200 18 its working. (i.e. copy from
FLASH to RAM)
Can please anybody tell me what's going wrong??
Maybe you have to
Hi Prafulla, hi Marvell engineers,
By default Auto Negotiation is enabled for interface speed
but on some platforms like RD6281A it does not work.
If you want to forced program it to desired speed,
this patch helps-
do you have some information why auto negotiation doesn't work on RD6281A?
Jean,
On 14:45 Mon 29 Jun , Dieter Kiermaier wrote:
Hi,
patch 2 of 2 which adds Kirkwood GPIO support to Sheevaplug.
Any comments are welcome!
Dieter
From 528b24be54256cee20f965bc772390034eaeb232 Mon Sep 17 00:00:00 2001
From: Dieter Kiermaier dk-arm-li...@gmx.de
Hi Jean, hi Prafulla,
here the corrected version.
Many thanks,
Dieter
On 14:45 Mon 29 Jun , Dieter Kiermaier wrote:
Hi,
patch 2 of 2 which adds Kirkwood GPIO support to Sheevaplug.
Any comments are welcome!
Dieter
From 528b24be54256cee20f965bc772390034eaeb232 Mon Sep
Hi Stefan, hi Prafulla,
Hi Prafulla,
On Wednesday 08 July 2009 19:48:19 Prafulla Wadaskar wrote:
MAINTAINERS |1 +
MAKEALL |1 +
Makefile |3 +
board/keymile/suen3/Makefile | 51 +
Hi,
-Original Message-
From: Dieter Kiermaier [mailto:dk-arm-li...@gmx.de]
Sent: Thursday, July 09, 2009 12:50 PM
To: Prafulla Wadaskar
Subject: Re: [U-Boot] [PATCH2/2] Sheevaplug: Add Kirkwood
gpio support to Sheevaplug
Hi Prafulla,
-Original Message
Am Mittwoch 01 Juli 2009 16:19:45 schrieb Simon Kagstrom:
On Wed, 1 Jul 2009 16:03:25 +0200
Dieter Kiermaier dk-arm-li...@gmx.de wrote:
It works pretty well with U-boot built for sheevaplug - my main
problem now is that it hangs on miiphy_reset.
I can confirm that. Have the same
e89ebedf1528e821e504c91af802687efb21533b Mon Sep 17 00:00:00 2001
From: Dieter Kiermaier dk-arm-li...@gmx.de
Date: Fri, 26 Jun 2009 14:45:13 +0200
Subject: [PATCH] Kirkwood: add Marvell Sheevaplug gpio support
---
board/Marvell/sheevaplug/sheevaplug.c |1 +
cpu/arm926ejs/kirkwood/Makefile |1
-Original Message-
From: Dieter Kiermaier [mailto:dk-arm-li...@gmx.de]
Sent: Monday, June 29, 2009 1:33 PM
To: u-boot@lists.denx.de
Cc: Prafulla Wadaskar
Subject: [PATCH] Kirkwood: add Marvell Sheevaplug gpio support
Hi List,
this if my first patch which goes
Am Montag 29 Juni 2009 10:15:22 schrieb Prafulla Wadaskar:
-Original Message-
From: Dieter Kiermaier [mailto:dk-arm-li...@gmx.de]
Sent: Monday, June 29, 2009 1:33 PM
To: u-boot@lists.denx.de
Cc: Prafulla Wadaskar
Subject: [PATCH] Kirkwood: add Marvell Sheevaplug gpio support
Hi again,
Here is my first out of 2 patches which adds gpio support to arch/kirkwood.
Any suggestions?
Cheers,
Dieter
From fcdea0c7bba3c25a1fb183bbcaf6d1a4ec32a157 Mon Sep 17 00:00:00 2001
From: Dieter Kiermaier dk-arm-li...@gmx.de
Date: Mon, 29 Jun 2009 14:22:13 +0200
Subject: [PATCH
Hi,
patch 2 of 2 which adds Kirkwood GPIO support to Sheevaplug.
Any comments are welcome!
Dieter
From 528b24be54256cee20f965bc772390034eaeb232 Mon Sep 17 00:00:00 2001
From: Dieter Kiermaier dk-arm-li...@gmx.de
Date: Mon, 29 Jun 2009 14:29:15 +0200
Subject: [PATCH] Sheevaplug: Add Kirkwood
Prafulla,
-Original Message-
From: Scott Wood [mailto:scottw...@freescale.com]
Sent: Tuesday, June 23, 2009 3:35 AM
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Ashish Karkare; Prabhanjan Sarnaik;
Ronen Shitrit
Subject: Re: [U-Boot] [PATCH v2 1/3][repost] nand: Add
Am Dienstag 23 Juni 2009 10:01:28 schrieb Prafulla Wadaskar:
-Original Message-
From: Dieter Kiermaier [mailto:dk-arm-li...@gmx.de]
Sent: Tuesday, June 23, 2009 1:23 PM
To: u-boot@lists.denx.de
Cc: Prafulla Wadaskar; Scott Wood; Jean-Christophe
PLAGNIOL-VILLARD; Ashish Karkare
Am Dienstag 23 Juni 2009 10:35:31 schrieb Jean-Christophe PLAGNIOL-VILLARD:
I2C lowest priority (as per need)
Can I do something to push I2C priority?
If the I/O is shared with gpio you can use bitbanging with few hours
I think this would be the best to start - due to the fact that I
Am Dienstag 23 Juni 2009 12:38:05 schrieb Prafulla Wadaskar:
-Original Message-
From: Dieter Kiermaier [mailto:dk-arm-li...@gmx.de]
Sent: Tuesday, June 23, 2009 2:18 PM
To: Jean-Christophe PLAGNIOL-VILLARD
Cc: Prafulla Wadaskar; u-boot@lists.denx.de; Scott Wood;
Ashish Karkare
Am Dienstag 23 Juni 2009 14:06:46 schrieb Prafulla Wadaskar:
-Original Message-
From: Dieter Kiermaier [mailto:dk-arm-li...@gmx.de]
Sent: Tuesday, June 23, 2009 4:53 PM
To: Prafulla Wadaskar
Cc: Jean-Christophe PLAGNIOL-VILLARD; u-boot@lists.denx.de;
Scott Wood; Ashish Karkare
André,
Dieter,
On Fri, 2009-06-19 at 17:46 +0200, Dieter Kiermaier wrote:
Hello List,
I want to boot a (Lattice) FPGA from u-boot by using Slave Serial
configuration on a Marvell Kirkwood device.
Should be no problem as long as you'll have access to GPIO.
I'm working
André,
Dieter,
On Mon, 2009-06-22 at 08:19 +0200, Dieter Kiermaier wrote:
André,
Dieter,
On Fri, 2009-06-19 at 17:46 +0200, Dieter Kiermaier wrote:
Hello List,
I want to boot a (Lattice) FPGA from u-boot by using Slave Serial
configuration on a Marvell Kirkwood
Prafulla,
-Original Message-
From: u-boot-boun...@lists.denx.de
[mailto:u-boot-boun...@lists.denx.de] On Behalf Of Dieter Kiermaier
Sent: Monday, June 22, 2009 2:30 PM
To: André Schwarz
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] Question regarding FPGA firmware load
Am Montag 22 Juni 2009 11:17:34 schrieb André Schwarz:
On Mon, 2009-06-22 at 11:00 +0200, Dieter Kiermaier wrote:
André,
Dieter,
On Mon, 2009-06-22 at 08:19 +0200, Dieter Kiermaier wrote:
André,
Dieter,
On Fri, 2009-06-19 at 17:46 +0200, Dieter Kiermaier wrote
Hi all,
I've tried the first time booting a self compiled u-boot from git.marvell.com
U-Boot can be downloaded and started with openocd quite well.
Boot messages (version is dirty due to a comment in board file):
U-Boot 2009.06-rc2-02207-g14c575a-dirty (Jun 22 2009 - 13:40:45)
Am Montag 22 Juni 2009 14:53:44 schrieb André Schwarz:
On Mon, 2009-06-22 at 14:41 +0200, Dieter Kiermaier wrote:
André,
Dieter,
On Mon, 2009-06-22 at 14:04 +0200, Dieter Kiermaier wrote:
Hi all,
I've tried the first time booting a self compiled u-boot from
Am Montag 22 Juni 2009 17:34:35 schrieb André Schwarz:
André,
Dieter,
On Mon, 2009-06-22 at 17:01 +0200, Dieter Kiermaier wrote:
Am Montag 22 Juni 2009 15:08:20 schrieb Dieter Kiermaier:
This seems to be an issue regarding Gigabit / 100MBits uplink with
current marvell git u-boot
(Sheevaplug) ping crashes(?) U-Boot
-Original Message-
From: u-boot-boun...@lists.denx.de
[mailto:u-boot-boun...@lists.denx.de] On Behalf Of Dieter Kiermaier
Sent: Monday, June 22, 2009 9:21 PM
To: André Schwarz
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] Kirkwood
Hi Prafulla,
It's my pleasure to reply you :-)
Basic Kirkwood Soc Support patches are available on the u-boot-arm.git/next
(will be mainlined soon) Sheevaplug board support patches are also
submitted those are under review, you can find them here...
Hi again,
Hi Prafulla,
It's my pleasure to reply you :-)
Basic Kirkwood Soc Support patches are available on the
u-boot-arm.git/next (will be mainlined soon) Sheevaplug board support
patches are also submitted those are under review, you can find them
here...
Prafulla,
(...deleted some stuff...)
What patches are in the pipeline?
Some other board supports (MV88F6281GTW_GE) and Kirkwood SPI driver support
Kirkwood USB support (at this moment)
Also very interesting :)
(...deleted, too...)
What I forgot to mention is the i2c driver inside
-Original Message-
From: Dieter Kiermaier [mailto:dk-arm-li...@gmx.de]
Sent: Friday, June 19, 2009 3:17 PM
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] Marvell Kirkwood newbie question GPIO functions
Prafulla,
(...deleted some stuff
Hello List,
I want to boot a (Lattice) FPGA from u-boot by using Slave Serial
configuration on a Marvell Kirkwood device.
As seen there is an (Xilinx and Altera) FPGA loader driver allready available
in u-boot.
Please can somebody explain how I have to provide a FPGA bitstream
image to u-boot?
Hello everybody out there,
first off all - thanks to everyone from the u-boot community for this helpful
piece of code :)
Could somebody give me a short overview of the plans regarding the u-boot port
of the Kirkwood arch (e.g. Sheevaplug board)?
Currently I'm using the u-boot from
45 matches
Mail list logo