Hi,
On 22-12-16 11:31, Chen-Yu Tsai wrote:
On Tue, Dec 20, 2016 at 12:17 AM, Hans de Goede <hdego...@redhat.com> wrote:
Hi,
On 19-12-16 17:06, Icenowy Zheng wrote:
19.12.2016, 23:30, "Hans de Goede" <hdego...@redhat.com>:
Hi,
On 19-12-16 16:22, Icenowy Zheng
Hi,
On 19-12-16 17:25, Icenowy Zheng wrote:
20.12.2016, 00:17, "Hans de Goede" <hdego...@redhat.com>:
Hi,
On 19-12-16 17:06, Icenowy Zheng wrote:
19.12.2016, 23:30, "Hans de Goede" <hdego...@redhat.com>:
Hi,
On 19-12-16 16:22, Icenowy Zheng wr
Hi,
On 19-12-16 17:06, Icenowy Zheng wrote:
19.12.2016, 23:30, "Hans de Goede" <hdego...@redhat.com>:
Hi,
On 19-12-16 16:22, Icenowy Zheng wrote:
Hi everyone,
Today, I and KotCzarny on IRC of linux-sunxi found a problem in the SID
controller of H3 (incl. H
Hi,
On 19-12-16 16:22, Icenowy Zheng wrote:
Hi everyone,
Today, I and KotCzarny on IRC of linux-sunxi found a problem in the SID
controller of H3 (incl. H2+).
See https://irclog.whitequark.org/linux-sunxi/2016-12-19 .
Two read method of the H3 eFUSE is used in the BSP: by register accessing,
Hi,
On 13-12-16 21:28, Simon Glass wrote:
Hi,
On 12 December 2016 at 19:36, Jernej Skrabec wrote:
This patch series add support for HDMI output. Support for other,
newer, SoCs, which also uses DE2 and same or similar HDMI controller
and PHY can be easily added later
Hi,
On 30-11-16 11:50, Olliver Schinagl wrote:
Hey maime,
Sorry for constantly getting your e-mail address wrong! Sorry!
On 30-11-16 10:12, maxime.rip...@free-electrons.com wrote:
On Wed, Nov 30, 2016 at 09:00:51AM +, Marcel Ziswiler wrote:
Hi Olliver
On Fri, 2016-11-25 at 16:30 +0100,
HI,
On 28-11-16 13:42, Maxime Ripard wrote:
Hi Hans,
On Fri, Nov 25, 2016 at 09:12:30AM +0100, Hans de Goede wrote:
Hi,
On 24-11-16 22:22, Maxime Ripard wrote:
On Wed, Nov 23, 2016 at 07:28:16PM +0100, Jelle van der Waa wrote:
Introduce a new CONFIG_SATAPWR Kconfig option to replace
Hi,
On 28-11-16 07:54, Minkyu Kang wrote:
Hi Jaehoon,
On 28/11/16 14:08, Jaehoon Chung wrote:
Hi Marek,
On 09/23/2016 01:15 PM, Simon Glass wrote:
+Marek
On 9 September 2016 at 04:20, Jaehoon Chung wrote:
If USB is stopped, just run 'usb start' instead of printing
Hi,
On 24-11-16 22:22, Maxime Ripard wrote:
On Wed, Nov 23, 2016 at 07:28:16PM +0100, Jelle van der Waa wrote:
Introduce a new CONFIG_SATAPWR Kconfig option to replace the
option in CONFIG_SYS_EXTRA_OPTIONS.
Signed-off-by: Jelle van der Waa
---
board/sunxi/Kconfig
CONFIG_SYS_MMC_MAX_DEVICE
Hans de Goede (1):
sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
Jelle van der Waa (1):
sunxi: Use the available Kconfig option for AHCI
Marcel Ziswiler (1):
colibri_pxa270: transition to driver model for serial
Maxime Ripard (3):
sunxi: Sync
Hi,
On 21-11-16 11:05, Jagan Teki wrote:
On Mon, Nov 14, 2016 at 12:24 AM, Hans de Goede <hdego...@redhat.com> wrote:
And also remove it from scripts/config_whitelist.txt as the
Mele_M5_defconfig was the only one defining it.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
016 at 12:53:13PM +0100, Hans de Goede wrote:
Hi All,
A while back I wrote:
"Between my $dayjob, linux-sunxi, other foss projects and last but
not least spending time with my wife and children I'm way too
busy lately.
So I've decided to seriously scale back my involvement in
linux-sunxi,
Hi,
On 17-11-16 20:50, Simon Glass wrote:
Hi Hans,
On 14 November 2016 at 04:53, Hans de Goede <hdego...@redhat.com> wrote:
Hi All,
A while back I wrote:
"Between my $dayjob, linux-sunxi, other foss projects and last but
not least spending time with my wife and children I'm w
and discuss this proper I guess.
On 15-11-16 10:26, Hans de Goede wrote:
Hi,
On 15-11-16 04:25, Joe Hershberger wrote:
On Tue, Nov 8, 2016 at 9:54 AM, Olliver Schinagl <oli...@schinagl.nl>
wrote:
Currently we inject 5 ethernet addresses into the environment, just in
case we may need them.
Hi,
On 15-11-16 11:17, Olliver Schinagl wrote:
Hey Hans,
I was hopeing and expecting this :)
As you will be able to tell below, I need to learn a bit more as to why we do
things and discuss this proper I guess.
On 15-11-16 10:26, Hans de Goede wrote:
Hi,
On 15-11-16 04:25, Joe
Hi,
On 15-11-16 04:25, Joe Hershberger wrote:
On Tue, Nov 8, 2016 at 9:54 AM, Olliver Schinagl wrote:
Currently we inject 5 ethernet addresses into the environment, just in
case we may need them. We do this because some boards have no eeprom
(programmed) with a proper
Hi,
On 14-11-16 18:00, Yann E. MORIN wrote:
Hans, Ian, All,
On 2016-11-14 12:53 +0100, Hans de Goede spake thusly:
A while back I wrote:
"Between my $dayjob, linux-sunxi, other foss projects and last but
not least spending time with my wife and children I'm way too
busy lately.
So
Hi,
On 14-11-16 15:12, Maxime Ripard wrote:
On Mon, Nov 14, 2016 at 12:18:06PM +0100, Hans de Goede wrote:
#ifdef CONFIG_SPL_SPI_SUNXI
@@ -143,7 +157,14 @@
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC_SUNXI
#define CONFIG_MMC_SUNXI_SLOT 0
-#define CONFIG_ENV_IS_IN_MMC
+#endif
Hi,
On 14-11-16 15:11, Olliver Schinagl wrote:
Hey Hans,
On 14-11-16 12:26, Hans de Goede wrote:
Hi,
On 08-11-16 17:38, Olliver Schinagl wrote:
The current implementation to force the PHY into master mode is to have a
define which affects all realtek PHY's. This is not needed
Hi,
On 14-11-16 15:09, Maxime Ripard wrote:
Hi,
On Mon, Nov 14, 2016 at 12:18:06PM +0100, Hans de Goede wrote:
#ifdef CONFIG_SPL_SPI_SUNXI
@@ -143,7 +157,14 @@
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC_SUNXI
#define CONFIG_MMC_SUNXI_SLOT 0
-#define CONFIG_ENV_IS_IN_MMC
Hi,
On 14-11-16 14:53, Maxime Ripard wrote:
On Mon, Nov 14, 2016 at 12:29:25PM +0100, Hans de Goede wrote:
Hi,
On 14-11-16 12:18, Hans de Goede wrote:
Hi,
On 08-11-16 17:21, Maxime Ripard wrote:
This program generates raw SPL images that can be flashed on the NAND with
the ECC
@hellion.org.uk>
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
MAINTAINERS | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 0bd8995..83a70df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -167,9 +167,7 @@ F: arch/arm/cpu/armv7/s
Hi All,
A while back I wrote:
"Between my $dayjob, linux-sunxi, other foss projects and last but
not least spending time with my wife and children I'm way too
busy lately.
So I've decided to seriously scale back my involvement in
linux-sunxi, as such I'm going to step down as u-boot sunxi
Hi,
On 14-11-16 12:19, Hans de Goede wrote:
Hi,
On 08-11-16 17:21, Maxime Ripard wrote:
Introduce a new sunxi-spl-with-ecc.bin image with already the right header,
ECC, randomizer and padding for the BROM to be able to read it.
It needs to be flashed using a raw access to the NAND so
Hi,
On 14-11-16 12:18, Hans de Goede wrote:
Hi,
On 08-11-16 17:21, Maxime Ripard wrote:
This program generates raw SPL images that can be flashed on the NAND with
the ECC and randomizer properly set up.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
Looks good
good to me:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
<maxime.rip...@free-electrons.com>
Patch 3/3 needs a v3 before this can be merged, otherwise this
looks good to me:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
configs/CHIP_pro_defconfig | 27 +++
1 file changed, 27 insertions(+),
<maxime.rip...@free-electrons.com>
Looks good to me:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
drivers/mtd/nand/Kconfig | 16
1 file changed, 16 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/K
to it, since we already have all the
right parameters.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
Looks good to me:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
Makefile | 3 +++
scripts/Makefile.spl | 12
2 files
Hi,
On 08-11-16 17:21, Maxime Ripard wrote:
This program generates raw SPL images that can be flashed on the NAND with
the ECC and randomizer properly set up.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
Looks good to me:
Reviewed-by: Hans de Goede <hdego...@r
Hi,
On 08-11-16 17:21, Maxime Ripard wrote:
From: Hans de Goede <hdego...@redhat.com>
Enable the NAND and UBI support in the configuration header so that we can
(finally) use it.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Maxime Ripard <maxime.rip...@fre
l...@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
Looks good to me:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
drivers/mtd/nand/nand_ids.c | 3 +++
1 file changed, 3 insertions(+), 0 deletions(-)
diff --git a/drive
Hi,
On 08-11-16 17:21, Maxime Ripard wrote:
Those DT will be part of 4.10, sync them so we can have our own config.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
Looks good to me:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
Hi,
On 08-11-16 11:19, Maxime Ripard wrote:
The NextThing's C.H.I.P. can have expansion boards called DIPs. Those DIPs
are connected through the external headers, and comes with an
identification mechanism based on 1-Wire EEPROMs.
That auto-detection works great, because 1-Wire allows the
Hi,
On 14-11-16 01:34, Jaehoon Chung wrote:
On 11/14/2016 07:50 AM, Tom Rini wrote:
On Sun, Nov 13, 2016 at 07:50:53PM +0100, Hans de Goede wrote:
Hi,
On 04-11-16 16:18, Maxime Ripard wrote:
Some eMMC will fail at the first switch, but would succeed in a subsequent
one.
Make sure we try
SUNXI"), merged before that, renamed that symbol, so that
the first patch basically gets ineffective.
Adjust the symbol name in tools/Makefile to make it build again.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com&g
. The structure is based on existing sunxi PSCI code.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
arch/arm/cpu/armv7/sunxi/Makefile| 4 +
arch/arm/cpu/armv7/sunxi/psci-mcpm.c | 234 ++
Hi,
On 09-11-16 11:21, Chen-Yu Tsai wrote:
Now that we have a basic version of PSCI firmware, enable non-secure
boot and PSCI on the A80.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
board/sunxi
Hi,
On 09-11-16 11:21, Chen-Yu Tsai wrote:
The A80 also has the TrustZone Protection Controller (TZPC), called
the Secure Memory Touch Arbiter (SMTA).
Enable non-secure access to all the peripherals at boot time.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
LGTM:
Reviewed-by: Hans de
Hi,
On 09-11-16 11:21, Chen-Yu Tsai wrote:
The A80 has a different PRCM register layout.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
arch/arm/include/asm/arch-sunxi/prcm_
Hi,
On 09-11-16 11:21, Chen-Yu Tsai wrote:
The A80 has a 256 kiB secure SRAM. However the first 4 kiB are reserved
for CPU0 hotplug flags.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
include/configs
Hi,
On 09-11-16 11:21, Chen-Yu Tsai wrote:
The A80 has a different CPUCFG register layout, likely due to having
2 clusters.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
arch/arm/include/as
Hi,
On 09-11-16 11:21, Chen-Yu Tsai wrote:
The A80 has a 256 kiB secure SRAM. However the first 4 kiB are reserved
for CPU0 hotplug flags.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
arch/arm/incl
Hi,
On 09-11-16 11:21, Chen-Yu Tsai wrote:
The A80, having 2 clusters of 4 cores each, has an ARM CCI-400 hardware
block for cache coherency.
Add the base address for CCI-400, and also add the base address for CPUCFG.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
LGTM:
Reviewed-by: H
Hi,
On 09-11-16 11:21, Chen-Yu Tsai wrote:
The A80 is a big.LITTLE SoC with 4x Cortex-A7 in cluster 0 and 4x
Cortex-A15 in cluster 1.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
arch/arm/cpu/armv7
And also remove it from scripts/config_whitelist.txt as the
Mele_M5_defconfig was the only one defining it.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
configs/Mele_M5_defconfig| 2 +-
scripts/config_whitelist.txt | 1 -
2 files changed, 1 insertion(+), 2 deletions(-)
diff
Hi,
On 04-11-16 16:18, Maxime Ripard wrote:
The SinA33 has an 4GB Toshiba eMMC connected to the MMC2 controller.
Enable it.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
Hi,
On 04-11-16 16:18, Maxime Ripard wrote:
The SinA33 comes with an optional 7" display. Enable it in the
configuration.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
<maxime.rip...@free-electrons.com>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Pantelis or Tom, can you pick this up please ?
Regards,
Hans
---
drivers/mmc/mmc.c | 15 +++
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/mmc.c b
Hi,
On 04-11-16 16:18, Maxime Ripard wrote:
The sun8i SoCs also have a 8 bits capable MMC2 controller. Enable the
support for those too.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
Hi,
On 05-11-16 20:51, Emmanuel Vadot wrote:
Set CONFIG_SYS_MMC_MAX_DEVICE to 4 for sunxi SoC.
This define is needed in the API code.
Signed-off-by: Emmanuel Vadot <m...@bidouilliste.com>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
include/c
nux kernel is about 1s now, down from ~5s (Nanopi Neo, sunxi H3).
Signed-off-by: "Yann E. MORIN" <yann.morin.1...@free.fr>
Cc: Ian Campbell <i...@hellion.org.uk>
Cc: Hans De Goede <hdego...@redhat.com>
---
This is a tentative patch, acting as an RFC (unless it is good to go
Hi,
On 03-11-16 01:58, Andre Przywara wrote:
Somehow an int returning function without a return statement sneaked
in. Fix it.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
drivers/mtd/spi/sun
Hi,
On 31-10-16 21:05, Jelle van der Waa wrote:
Use the already available Kconfig option for AHCI. Tested on the
BananaPi.
Signed-off-by: Jelle van der Waa <je...@vdwaa.nl>
Patch LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
configs/A
Hi,
On 11-11-16 19:33, Mylene Josserand wrote:
Hi everyone,
I am currently using FEL and Fastboot to flash a sunxi-device with SPL and
u-boot.
In my board, I have two MMC devices: a MMC slot and an eMMC.
My use-case is to flash an empty device. I want to use FEL to boot a u-boot and
get around
to it soonish.
Regards,
Hans
Regards,
Yann E. MORIN.
Signed-off-by: "Yann E. MORIN" <yann.morin.1...@free.fr>
Cc: Ian Campbell <i...@hellion.org.uk>
Cc: Hans De Goede <hdego...@redhat.com>
---
This is a tentative patch, acting as an RFC (unless it is go
Hi,
On 09-11-16 11:21, Chen-Yu Tsai wrote:
Hi everyone,
This series adds basic PSCI support for the A80 to enable SMP on the
first cluster. This at least allows people to use more than one core.
The term "basic" is used because the series does not add support for
multi-cluster cache and power
Hi,
On 04-11-16 23:57, Alexandr Bochkarev wrote:
I have found problem place, this patch with hotfix allows to boot Allwinner A20
from eMMC.
Dont know how to full fix it.
Maxime posted a proper fix for this issue yesterday:
https://patchwork.ozlabs.org/patch/691284/
Can you give that one a
Hi,
On 03-11-16 11:36, Alexander Graf wrote:
On 11/03/2016 10:51 AM, Andre Przywara wrote:
Hi,
On 03/11/16 09:34, Hans de Goede wrote:
Hi,
First of all cool stuff! Thank you Andre and all others
involved for making this happen.
On 03-11-16 09:49, Alexander Graf wrote:
On 11/03/2016 02
Hi,
On 03-11-16 10:38, Andre Przywara wrote:
Hi,
On 03/11/16 08:49, Alexander Graf wrote:
On 11/03/2016 02:36 AM, Andre Przywara wrote:
Hi,
this is my first take on the SPL support for the Allwinner A64 SoC.
The actual meat - the DRAM initialization code - has been provided
by Jens - many
Hi,
On 03-11-16 10:17, Andre Przywara wrote:
Hi Hans,
thanks for having a look.
On 03/11/16 09:13, Hans de Goede wrote:
Hi,
On 03-11-16 10:10, Andre Przywara wrote:
Hi,
On 03/11/16 08:54, Alexander Graf wrote:
On 11/03/2016 02:36 AM, Andre Przywara wrote:
To avoid enumerating the very
Hi,
First of all cool stuff! Thank you Andre and all others
involved for making this happen.
On 03-11-16 09:49, Alexander Graf wrote:
On 11/03/2016 02:36 AM, Andre Przywara wrote:
Hi,
this is my first take on the SPL support for the Allwinner A64 SoC.
The actual meat - the DRAM
Hi,
On 03-11-16 10:10, Andre Przywara wrote:
Hi,
On 03/11/16 08:54, Alexander Graf wrote:
On 11/03/2016 02:36 AM, Andre Przywara wrote:
To avoid enumerating the very same DRAM values in defconfig files
for each and every Allwinner A64 board out there, let's put some sane
default values in
Hi Tom,
Here is another sunxi pull-req, this one is to be applied on top of the
bug-fix one I send out a few seconds ago. I'm sending this one as
a separate pull-req since it contains non-bugfix changes which were
first submitted outside the merge window.
The entire set of patches in this
Hi Tom,
Here is a pull request with some small sunxi cleanups / fixes
for v2016.11.
Note I expect you to merge this after Marek's usb pull-req. If you don't
nothing will break, but you will get a whole bunch of new compiler warnings
when building the pine64_plus defconfig.
The following
Hi,
On 29-10-16 14:52, Hans de Goede wrote:
Hi,
On 21-10-16 03:24, Andre Przywara wrote:
From: Amit Singh Tomar <amittome...@gmail.com>
Mostly by adding MACH_SUN50I to some existing #ifdefs enable support
for the the HCI0 USB host controller on the A64.
Fix up some minor 64-bit h
Cc: Maxime Ripard <maxime.rip...@free-electrons.com>
Cc: Ian Campbell <i...@hellion.org.uk>
Cc: Hans De Goede <hdego...@redhat.com>
Signed-off-by: Jagan Teki <ja...@openedev.com>
I appreciate all the reviews you've done of sunxi patches,
thank you for that. But I've ye
Hi,
On 30-10-16 06:30, Chen-Yu Tsai wrote:
On Sat, Oct 29, 2016 at 8:06 PM, Hans de Goede <hdego...@redhat.com> wrote:
Hi,
On 28-10-16 19:30, Hans de Goede wrote:
Hi Chen-Yu,
On 28-10-16 12:21, Chen-Yu Tsai wrote:
Hi everyone,
This series adds full SPL with DRAM initiali
;amittome...@gmail.com>
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
Other then CONFIG_USB_MAX_CONTROLLER_COUNT no longer being necessary
(it should be dropped from include/configs/sun50i.h) this patch looks
good to me and is:
Reviewed-by: Hans de Goede <hdego...@redhat.com&g
Przywara <andre.przyw...@arm.com>
Patch looks good to me:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
p.s.
About the ohci_writel macro changes also giving the macro parameters
more sensible names, I believe it is fine to do this while at it and
that this does not need
that your patch also modified the A20-SOM
where as the patch I merged did not.
I've added the A20-SOM part of your patch (with you
as the author) to my tree now and will include it
in my next pull-req.
Regards,
Hans
Regards,
Stefan Mavrodiev
Olimex LDT
On 10/11/2016 12:38 PM, Hans de
Hi,
On 29-10-16 12:23, Stefan Brüns wrote:
mksunxiboot is useful outside of u-boot, it is e.g. used by sunxi-tools.
Signed-off-by: Stefan Brüns
Thank you I've applied this to my tree and will
include it in my next pull-req.
Regards,
Hans
---
Hi,
On 21-10-16 02:11, Andre Przywara wrote:
The sun8i-emac driver works fine with the A64 Ethernet IP, but we are
missing an alias entry to trigger the driver instantiation by U-Boot.
Add the line to point U-Boot to the Ethernet DT node.
This enables TFTP boot on the Pine64.
Signed-off-by:
Hi,
On 13-10-16 17:40, Masahiro Yamada wrote:
ARCH_SUNXI selects DM_USB, where CONFIG_USB_MAX_CONTROLLER_COUNT
is not used.
Signed-off-by: Masahiro Yamada
Thank you I've applied this to my tree and will
include it in my next pull-req.
Regards,
Hans
---
Hi,
On 13-10-16 10:49, Jagan Teki wrote:
CONFIG_SUNXI -> CONFIG_ARCH_SUNXI
and removed CONFIG_SUNIX from config_whitelist.txt
Cc: Simon Glass <s...@chromium.org>
Cc: Ian Campbell <i...@hellion.org.uk>
Cc: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Jagan Tek
Hi,
On 29-10-16 03:16, Chen-Yu Tsai wrote:
On Sat, Oct 29, 2016 at 1:30 AM, Hans de Goede <hdego...@redhat.com> wrote:
Hi Chen-Yu,
On 28-10-16 12:21, Chen-Yu Tsai wrote:
Hi everyone,
This series adds full SPL with DRAM initialization for sun9i (A80).
The bulk of the work wa
Hi,
On 28-10-16 19:30, Hans de Goede wrote:
Hi Chen-Yu,
On 28-10-16 12:21, Chen-Yu Tsai wrote:
Hi everyone,
This series adds full SPL with DRAM initialization for sun9i (A80).
The bulk of the work was done by the people at Theobroma Systems.
Their work can be found here:
https
Hi,
On 29-10-16 13:08, Chen-Yu Tsai wrote:
On Sat, Oct 29, 2016 at 2:45 AM, Jagan Teki wrote:
On Fri, Oct 28, 2016 at 3:51 PM, Chen-Yu Tsai wrote:
From: Philipp Tomsich
On sun9i, the GTBUS manages transaction
Hi,
On 28-10-16 20:54, Jagan Teki wrote:
On Fri, Oct 28, 2016 at 3:51 PM, Chen-Yu Tsai wrote:
From: Philipp Tomsich
This adds DRAM initialisation code for sun9i, which calculates the
appropriate timings based on timing information for
Hi Chen-Yu,
On 28-10-16 12:21, Chen-Yu Tsai wrote:
Hi everyone,
This series adds full SPL with DRAM initialization for sun9i (A80).
The bulk of the work was done by the people at Theobroma Systems.
Their work can be found here:
https://git.theobroma-systems.com/armadillo-u-boot.git/
I
Hi,
On 26-10-16 09:00, Jagan Teki wrote:
On Tue, Oct 25, 2016 at 3:59 AM, André Przywara <andre.przyw...@arm.com> wrote:
On 21/10/16 11:28, Hans de Goede wrote:
Hi,
On 21-10-16 12:06, Andre Przywara wrote:
Hi,
On 21/10/16 10:31, Jagan Teki wrote:
On Fri, Oct 21, 2016 at 5:41 AM,
Hi,
On 21-10-16 12:06, Andre Przywara wrote:
Hi,
On 21/10/16 10:31, Jagan Teki wrote:
On Fri, Oct 21, 2016 at 5:41 AM, Andre Przywara wrote:
The sun8i-emac driver works fine with the A64 Ethernet IP, but we are
missing an alias entry to trigger the driver
Hi,
On 10/11/2016 10:44 AM, Stefan Mavrodiev wrote:
Originally dram clock was set to 480MHz, but this behaves
unstable. To improve stability the clock is reduced to 384MHz
Signed-off-by: Stefan Mavrodiev
The exact same change is already in u-boot-sunxi/next, and
Hi Tom,
Here is a small pull-req for v2016.11, consisting
of 2 small DRAM handling bug-fixes.
The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:
Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
09:33:37 -0400)
are available in the git
Hi,
On 30-09-16 07:19, Josh Marshall wrote:
We have a number of OlinuXino Lime2 boards (both NAND and eMMC versions)
which were experiencing sporadic hangs. After testing with some heavy
benchmarking and help from the Armbian forum, it was pinned down as the
DRAM settings for the board. The
Hi,
On 21-09-16 20:08, Jens Kuske wrote:
H3 seems to have a silicon bug breaking the impedance calibration.
This is currently worked around in software by multiple steps
combining the results to replace the wrong values.
Revision A chips need a different workaround, which is present in
the
:42, Stephen Arnold wrote:
On Sun, Oct 2, 2016 at 11:55 PM, Hans de Goede <hdego...@redhat.com> wrote:
Hi,
On 02-10-16 06:36, Stephen Arnold wrote:
From: Steve Arnold <stephen.arnol...@gmail.com>
* needs different GMAC_TX_DELAY than lamobo-r1 (not compatible)
I see why thi
Hi Antoine,
On 06-10-16 16:33, Antoine Tenart wrote:
Hi all,
This series adds an implementation of the psci suspend function for both
sun5i and sun7i. This was tested on Nextthing's CHIP and on a A20, using
cpuidle in Linux. My tests showed a power consumption reduced by a factor
2 on the CHIP
HI,
On 03-10-16 15:04, Jagan Teki wrote:
On Mon, Oct 3, 2016 at 12:25 PM, Hans de Goede <hdego...@redhat.com> wrote:
Hi,
On 02-10-16 06:36, Stephen Arnold wrote:
From: Steve Arnold <stephen.arnol...@gmail.com>
* needs different GMAC_TX_DELAY than lamobo-r1 (not compatible)
000..30a827f
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-bananapi-r1.dts
@@ -0,0 +1,321 @@
+/*
+ * Copyright 2015 Hans de Goede <hdego...@redhat.com>
+ *
+ * Changes copyright 2015 Stephen Arnold <nerd...@gentoo.org>
+ * This file is dual-licensed: you can use it either under the terms
+
HI,
On 19-09-16 15:17, Maxime Ripard wrote:
On Wed, Sep 14, 2016 at 12:05:19PM +0200, Hans de Goede wrote:
Hi,
On 13-09-16 13:50, Maxime Ripard wrote:
Hi,
On Mon, Sep 12, 2016 at 04:47:49PM +0200, Hans de Goede wrote:
On 12-09-16 15:56, Maxime Ripard wrote:
Hi,
On Mon, Sep 12, 2016 at 01
Hi,
On 19-09-16 17:00, Tom Rini wrote:
On Mon, Sep 19, 2016 at 04:53:04PM +0200, Hans de Goede wrote:
Hi,
On 19-09-16 16:03, Tom Rini wrote:
Based on A13-OLinuXino, enable DFU and UMS support.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
With this change I've added DFU to my
case there are space constraints,
but normally we enable it on all sunxi boards offering a
consistent set of available commands.
"
The same goes for this patch, otherwise this patch is:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Ig you want to feel free to apply this directly
(given
Hi,
On 18-09-16 17:00, Ian Campbell wrote:
On Sun, 2016-09-18 at 16:53 +0200, Hans de Goede wrote:
With sunxi-musb musb_lowlevel_init() can fail when a charger; or no
cable
is plugged into the otg port.
To avoid leaking the struct musb allocated by musb_init_controller()
on repeated
):
sunxi: musb: Power off OTG port VBUS when disabled
sunxi: Add mmc0 card detect pin for Sinlinx SinA33
sunxi: Enable USB host support for Sinlinx SinA33
sunxi: Enable USB gadget support for Sinlinx SinA33
Hans de Goede (2):
sunxi: axp2xx: disable ldoio0/1 at boot
controller(), it replaces this by free-ing the allocated
memory in musb_usb_remove() and calling musb_usb_remove() on
musb_usb_probe() errors to ensure proper cleanup.
While at it also make musb_usb_probe() and musb_usb_remove() static.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
driv
Kconfig:
config CMD_USB_MASS_STORAGE
default y
So that we can still disable it in case there are space constraints,
but normally we enable it on all sunxi boards offering a
consistent set of available comments.
So I've dropped this bit of the patch.
Otherwise this series LGTM:
Reviewed-by: Hans
musb reset its state.
This partially reverts commit c9f8947e6604 ("sunxi: usb-phy: Never
power off the usb ports")
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
Thank you, LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
I've added this to my local queue and this wil
Hi,
On 13-09-16 13:50, Maxime Ripard wrote:
Hi,
On Mon, Sep 12, 2016 at 04:47:49PM +0200, Hans de Goede wrote:
On 12-09-16 15:56, Maxime Ripard wrote:
Hi,
On Mon, Sep 12, 2016 at 01:53:24PM +0200, Ciprian Manea wrote:
I'm using a SinA33 dev board (Allwinner a33 SoC) and at the moment
I'm
Hi,
On 12-09-16 15:56, Maxime Ripard wrote:
Hi,
On Mon, Sep 12, 2016 at 01:53:24PM +0200, Ciprian Manea wrote:
I'm using a SinA33 dev board (Allwinner a33 SoC) and at the moment
I'm trying to boot from the eMMC.
But it fails in the following way:
*Got the following error at boot time:*
1 - 100 of 2119 matches
Mail list logo