Re: [Ubnt_users] Is there a direct sales person at UBNT I can speak with?

I don't think they exist... What's up? -- On 9/18/2019 4:41 PM, alex phillips wrote: /*Alex Phillips*/ CEO and General Manager RBNS.net HighSpeedLink.net *540-908-3993* ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailma

Re: [Ubnt_users] LOTS of excess equipment

We are migrating to 2AC as well... -- On 8/24/2019 4:59 PM, Forbes Mercy wrote: We've been cleaning up our garage and the majority of one bay was full of pulled NanoBridges and M5 radios. We've taken them apart and boxed them as dishes, horns and mounting hardware.  I think we have enough h

Re: [Ubnt_users] Old 5 and 8 port tough switches

Thank you. That means there are places those things are still useful. Instead of just trashing them. -- On 8/8/2019 8:20 PM, Mimbres Communications wrote: Yes, mixing was required. The switch chip buffer design was suboptimal. On Thu, Aug 8, 2019 at 3:50 PM Blair Davis <mailto:

[Ubnt_users] Old 5 and 8 port tough switches

My understanding on throughput problem with these was that it only occurred when port speeds were mixed... Some 100tx and some 1000Tx. If all were 100Tx or 1000Tx the problem did not happen... Is this right? -- -- West Michigan Wireless ISP Allegan, Michigan 49010 269-686-8648 A Division o

[Ubnt_users] GPS antenna

Anybody know of a replacement GPS antenna for UBNT 2AC units? -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users

[Ubnt_users] Replacement 2AC nosecones?

So, this one is pretty simple... Can we buy just the nosecone/electronics of the PowerBeam 2AC to upgrade my PowerBeam M2 units? Not expecting to save much on the price, but the shipping should drop a bit... And I have far more unused PowerBeam reflectors than I need for a while. -- ___

[Ubnt_users] PowerBeam 2AC

Does anybody know if the electronics/nosecone of the PB 2AC is physicaly compatable with the PB 2M? In other words, can I use the 2AC noses to replace the 2M noses? -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/lis

Re: [Ubnt_users] AF5xHD ethernet port limited to auto negotiation

Scary! -- On 1/5/2019 5:48 PM, Josh Luthman wrote: Off hand I think... Real line to neutral Real neutral to ground Real ground to line Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sat, Jan 5, 2019, 5:45 PM Mathew Howard

Re: [Ubnt_users] Ubiquiti commitment to WISPs

Rap? Get off my lawn!  Damn kids! -- On 8/14/2018 2:10 PM, Seth Mattinen wrote: > On 8/14/18 10:04 AM, Blair Davis wrote: >> Unless you are attempting to do make a 'wireless wire' pre-configured >> PtP link in which case the 2-pac doesn't go far enough. >&g

Re: [Ubnt_users] Ubiquiti commitment to WISPs

Having a single makes sense... Having a 5-pac makes sense... the 2-pac doesn't make any sense I can see... Unless you are attempting to do make a 'wireless wire' pre-configured PtP link in which case the 2-pac doesn't go far enough. -- On 8/13/2018 1:27 PM, Ben Moore via Ubnt_users wrote:

Re: [Ubnt_users] UBNET 900Mhz

Metal roof's too... We use UBNT 900 for range <.7 mile but heavy trees... No LoS at all.  Using Mikro pops and putting the UBNT 900 below the trees seems to turn the trick for us... -- On 5/31/2018 5:10 PM, Tommy Adams wrote: First picture is from the tower.  You can see we are not that h

Re: [Ubnt_users] UBNET 900Mhz

Us as well... Cash is king. -- On 5/31/2018 3:34 PM, Kees H. wrote: Same here, makes it easier to make it through the downturns in the economy *From:* RickG *Sent:* Thursday, May 31, 2018 11:04 AM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] UBNET 900Mhz Ah, that's the difference be

Re: [Ubnt_users] AF5x packet loss

What routing protocols are you using across those links? -- On 2/22/2018 1:54 AM, Kristian Hoffmann wrote: > Hi, > > This is going to sound crazy, but here we go... > > Has anyone seen packet loss across an AF5x link that occurred exactly > every 30 seconds?  I have a couple of links, on complet

[Ubnt_users] Looking for used gear

Still looking for used gear: Rocket M900 Dual Pol UBNT M900 Yagi NanoStation M2 Rocket M2 Rocket Dish M2 Most any M2 or 2AC gear Rocket M365 Rocket Dish M365 PowerBridge M365 I'll be traveling from Michigan to Northern Virginia next week... I'll be traveling from Michigan to Texas to Alabama i

[Ubnt_users] Looking to buy

Looking to buy: Used Ubiquity M900 Rockets Used Ubiquity M365 Rockets Used Ubiquity M365 PowerBridges Used Ubiquity M365 NanoStations Used 900MHz DualPol Yagi's (KP or Ubiquity) Used 2.4GHz DualPol omnis (Ubiquity or KP) Used 2.4GHz DualPol shielded sectors (Ubiquity Ti adjustable or Ubiquit

Re: [Ubnt_users] [WISPA Members] R2AC

By direct request in the 2AC beta forum. You have to ask for it. -- On 10/30/2017 10:31 PM, RickG wrote: As far a I can tell, the latest for the R2AC is 8.2.0. Yes, I'm on the beta program but it appears 8.4.3 is only out for 5AC units? On Mon, Oct 30, 2017 at 8:51 PM, Blair

Re: [Ubnt_users] solar powered towers

Morningstar paired with packetflux. -- On 7/31/2017 11:05 AM, Jan-OOLLC wrote: > looking for a source to acquire mppt charge controller w/IP addressable > LAN port for panel/battery monitoring > -- West Michigan Wireless ISP Allegan, Michigan 49010 269-686-8648 A Division of: Camp Communicat

[Ubnt_users] Looking to buy...

Used UBNT... M900 rockets and yagi's M2 Rockets M365 any Prefer within 400 miles of Michigan for anything larger than a Nanostation so we can pickup... Offlist, please -- West Michigan Wireless ISP Allegan, Michigan 49010 269-686-8648 A Division of: Camp Communication Services, INC _

Re: [Ubnt_users] new owner turning off power

SunMax panels, MorningStar controllers, Trojan T-105 batteries, PacketFlux Site Monitor, UBNT Air Cam. We have several setups like this that work great. Biggest issue is snow covering the panels in January... We send a guy out to equalize and water the batteries in January... He clears the

[Ubnt_users] Testing again

I am testing to several lists to try to find out where my messages are being lost... -- West Michigan Wireless ISP Allegan, Michigan 49010 269-686-8648 A Division of: Camp Communication Services, INC ___ Ubnt_users mailing list Ubnt_users@wispa.org

Re: [Ubnt_users] armored cat6 outdoor cable

That also cures coons that attack chickens. -- On 1/12/2017 12:54 PM, Sam Morris wrote: > I know this probably isn't one of the the solutions you were looking > for, but someone who isn't me has controlled raccoons with a mixture of > Golden Malrin (that's spelled correctly) fly killer mixed wit

[Ubnt_users] Air Prism

Are we going to see a Rocket Air Prism in the 2GHz band? -- West Michigan Wireless ISP Allegan, Michigan 49010 269-686-8648 A Division of: Camp Communication Services, INC ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailm

Re: [Ubnt_users] Crash reports

So, ePMP AP to UBNT CPE... Sorta like what Bitlomat was promising a year or two ago?? in 2.4GHz? Support for XM and XW hardware? -- On 12/8/2016 10:52 PM, RickG wrote: "If you're thinking Ubnt CPE + license to keep costs down I wouldn't waste the effort, it's the same price and every db cou

Re: [Ubnt_users] Little UniFi Switches - US-8 and US-8-60W

vailable to purchase in volume in late December (Merry Christmas!). Cheers, Brandon On Mon, Nov 21, 2016 at 10:42 AM, Blair Davis <mailto:the...@wmwisp.net>> wrote: I saw these too... A 5 port version would be very nice... In fact I was looking for a 5port POE powered and pass-thru e

Re: [Ubnt_users] Little UniFi Switches - US-8 and US-8-60W

I saw these too... A 5 port version would be very nice... In fact I was looking for a 5port POE powered and pass-thru earlier today. 8 port will work... And the store shows out of stock? -- On 11/21/2016 12:33 PM, Andris Bjornson wrote: This looks extremely interesting, particularly the PoE

Re: [Ubnt_users] AirGatway with parental controls

MT with MAC Auth and a script? -- On 11/16/2016 3:44 PM, Jan-OOLLC wrote: > Is there a firmware version that could provide homes with a means of > keeping the teenagers offline at night? The powercord is not a good > solution. I need something with multiple passwords or users and times > when

Re: [Ubnt_users] New UniFi Outdoor 11AC APs Coming Soon!

When will they ship at those prices? I just had a job decline the bid for a system... And those prices would allow me to re bid at 25-35% less or so... Blair -- On 11/15/2016 3:56 PM, Brandon Gilles via Ubnt_users wrote: Hey Ubiquiti Users, Wanted to point out some new outdoor APs for Un

Re: [Ubnt_users] Wanted to Buy...

n Nov 14, 2016, at 2:26 PM, Blair Davis wrote: > > Looking for used Ubiquity gear. > > M900, M2 and M365 gear all welcome. > > Prefer gear located in the Mid-West so we can pickup, but all considered. > > > -- > West Michigan Wireless ISP > Allegan, Michigan 4901

Re: [Ubnt_users] Wanted to Buy...

t; > Thank you, > Brett A Mansfield > >> On Nov 14, 2016, at 2:26 PM, Blair Davis wrote: >> >> Looking for used Ubiquity gear. >> >> M900, M2 and M365 gear all welcome. >> >> Prefer gear located in the Mid-West so we can pickup, but all considered

[Ubnt_users] Wanted to Buy...

Looking for used Ubiquity gear. M900, M2 and M365 gear all welcome. Prefer gear located in the Mid-West so we can pickup, but all considered. -- West Michigan Wireless ISP Allegan, Michigan 49010 269-686-8648 A Division of: Camp Communication Services, INC __

Re: [Ubnt_users] Telescoping Pole

. We have a stripped Bullet 2 and a stripped Bullet 5 to do the testing via my Surface 3 Pro. Works well. -- On 7/23/2016 9:10 PM, Jan-OOLLC wrote: > Great idea, any models affordable? with battery and lift capable to fly > a nanostation with an airGateway? > > Jan V > > On 07/

Re: [Ubnt_users] Telescoping Pole

get a drone! -- On 7/23/2016 6:14 PM, Shawn Burgei wrote: > Any good place to buy telescoping poles to use for site surveys? > > Thanks > Shawn > > Sent from my iPhone > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mai

Re: [Ubnt_users] M365, high latency

The -81 connection needs to go. The council one needs to be tested under load and see if it improves. We don't allow clients worse than -72 on our M365 gear. -- On 7/14/2016 12:33 PM, Andy Trimmell wrote: The user with the 1.625 modulation and the few in single digits are causing your AP t

Re: [Ubnt_users] Interface Usage Amounts

Interesting. What hardware? -- On 1/6/2015 9:17 PM, RickG wrote: Blair, I'm sure there is a limit but I've got a CPE showing 51 gigs and counting. On Tue, Jan 6, 2015 at 2:27 AM, Blair Davis <mailto:the...@wmwisp.net>> wrote: And, AFAICT, they are using 32bit counte

Re: [Ubnt_users] Interface Usage Amounts

And, AFAICT, they are using 32bit counters so they rollover at about 4Gbyts... -- On 1/6/2015 2:13 AM, RickG wrote: Clay, That's interesting too. I'd love to get Ubiquiti's input on this! On Mon, Jan 5, 2015 at 11:04 PM, Clay Stewart > wrote:

Re: [Ubnt_users] Rocketm900

wrote: I meant for 900MHz. On Sat, Jan 3, 2015 at 5:54 AM, Blair Davis <mailto:the...@wmwisp.net>> wrote: IME, bandpass filters are useless on 2.4GHz unless you have a major source of out of band interference... And, being locked into a channel isn't too bad, in the

Re: [Ubnt_users] Rocketm900

rs? Thanks On Fri, Jan 2, 2015 at 11:52 AM, RickG mailto:rgunder...@gmail.com>> wrote: Any news on cavity filters for 900MHz? On Wed, Dec 31, 2014 at 1:19 PM, Blair Davis mailto:the...@wmwisp.net>> wrote: No.

Re: [Ubnt_users] Rocketm900

2014 at 1:19 PM, Blair Davis mailto:the...@wmwisp.net>> wrote: No. We did try shielding with metal plates, but it seemed to be reflections. I'll give it another shot when I find some cavity filters that allow me to channelize the band. That

Re: [Ubnt_users] Rocketm900

1:19 PM, Blair Davis <mailto:the...@wmwisp.net>> wrote: No. We did try shielding with metal plates, but it seemed to be reflections. I'll give it another shot when I find some cavity filters that allow me to channelize the band. That has worked extremely well

Re: [Ubnt_users] Rocketm900

15 at 11:52 AM, RickG <mailto:rgunder...@gmail.com>> wrote: Any news on cavity filters for 900MHz? On Wed, Dec 31, 2014 at 1:19 PM, Blair Davis <mailto:the...@wmwisp.net>> wrote: No. We did try shielding with metal plates, but it seemed to be reflections. I'll give it a

Re: [Ubnt_users] Rocketm900

se RF Armor shield kits? Rory *From:*ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *Blair Davis *Sent:* Tuesday, December 30, 2014 10:32 PM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Rocketm900 yes. 2 omnis on different polarity's. I doubt 2 om

Re: [Ubnt_users] Rocketm900

30, 2014, at 10:24 PM, Blair Davis <mailto:the...@wmwisp.net>> wrote: We do it with separate V-Pol and H-Pol omnis... Some just terminate one chain with a 50ohm and run just a V-Pol. -- On 12/30/2014 11:50 PM, Chris Soiles wrote: Any suggestions for getting 360 coverage with RocketM900

Re: [Ubnt_users] Rocketm900

We do it with separate V-Pol and H-Pol omnis... Some just terminate one chain with a 50ohm and run just a V-Pol. -- On 12/30/2014 11:50 PM, Chris Soiles wrote: Any suggestions for getting 360 coverage with RocketM900's Chris Soiles Owner Rio Cities csoi...@riocities.net

Re: [Ubnt_users] AirVision and AirCams

pa.org <mailto:ubnt_users-boun...@wispa.org>] *On Behalf Of *Blair Davis *Sent:* Monday, December 15, 2014 3:55 PM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] AirVision and AirCams opps. Enjoy the chickens! -- On 12/15/2014 7:52 PM, Adair Winter wrote: Think you mea

Re: [Ubnt_users] AirVision and AirCams

opps. Enjoy the chickens! -- On 12/15/2014 7:52 PM, Adair Winter wrote: Think you meant http://www.wmwisp.net/cams.html On Mon, Dec 15, 2014 at 6:45 PM, Blair Davis <mailto:the...@wmwisp.net>> wrote: I have a bunch of AirCams running 1.1.5 firmware. Due to the fact that

[Ubnt_users] AirVision and AirCams

I have a bunch of AirCams running 1.1.5 firmware. Due to the fact that they have some custom code pushing a .jpg file, (still image), to a webserver once a minuet, I don't want their firmware updated or changed. You can see their pictures at www.wmwisp.net/cams Now, I want some extra capabili

Re: [Ubnt_users] Rocket ACs

ng to use. Somebody tell me if I'm off my rocker. josh reynolds :: chief information officer spitwspots ::www.spitwspots.com On 12/10/2014 07:16 PM, Blair Davis wrote: AirPrism was/is supposed to return to us the benefits, (adjacent channel rejection, improved sensitivity), of the ori

Re: [Ubnt_users] Rocket ACs

AirPrism was/is supposed to return to us the benefits, (adjacent channel rejection, improved sensitivity), of the original dual superheterodyne Hermes I and Intersil Prism II chipsets as opposed to the current direct conversion Atheros chipsets. I don't see a major use for it in clients, but f

Re: [Ubnt_users] Rocket ACs

Hz was highest priority and 2GHz is following. I would expect most of the 5GHz products to roll out over next 1-2 months and you will see 2GHz products soon after. Thanks, Ben On Tue, Dec 9, 2014 at 9:37 PM, Blair Davis mailto:the...@wmwisp.net>> wrote:

Re: [Ubnt_users] Rocket ACs

What he said... I remember the comments about Air Prisim supposed to be coming to 2GHz also... -- On 12/9/2014 5:25 PM, Jason Bailey wrote: Speaking of M2, Ben,can you speak on 2.4 GHz rockets with AirPrisim? I recall Robert saying the 2.4 was easy,the 5 GHz was the challenge. We who are bl

Re: [Ubnt_users] Rocket AC Multi Point

t;<https://twitter.com/ICSIL> ---- *From: *"Blair Davis" *To: *"Ubiquiti Users Group" *Sent: *Saturday, November 15, 2014 12:38:14 PM *Subject: *Re: [Ubnt_users] Rocket AC Multi Point I quit the UBNT forums when they changed the portal/format 3? maybe 4 year ago. I

Re: [Ubnt_users] Rocket AC Multi Point

: I'm just going to leave this here (for those who haven't noticed).. http://community.ubnt.com/t5/airMAX-Beta-Blog/airOS-v7-1-Beta3-released/ba-p/1097483 Inline image 1 On Tue, Oct 28, 2014 at 1:47 AM, Blair Davis

Re: [Ubnt_users] XW firmware on Nanostation 5M Locos?

ght now everything talks to everyone else. I'm just trying to figure out if the NS5ML has the newer, faster, processor. Rory *From:*ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *Blair Davis *Sent:* Monday, November 10, 2014 4:39 PM *To:* Ubiquiti Users Gr

Re: [Ubnt_users] XW firmware on Nanostation 5M Locos?

Suite 1337 Troy, OH 45373 On Nov 10, 2014 6:30 PM, "Blair Davis" <mailto:the...@wmwisp.net>> wrote: Isn't the XW for one CPU and the XM for a different CPU? -- On 11/10/2014 6:06 PM, Josh Luthman wrote: It's a free upgrade essentially. They didn

Re: [Ubnt_users] XW firmware on Nanostation 5M Locos?

Isn't the XW for one CPU and the XM for a different CPU? -- On 11/10/2014 6:06 PM, Josh Luthman wrote: It's a free upgrade essentially. They didn't want to make a new product since they sell a couple dozen of them every month. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayn

Re: [Ubnt_users] Rocket AC Multi Point

is is also something we are looking to offer in 2.4ghz. Similar to what we have in UAP-Outdoor+. Thanks, Ben On Oct 27, 2014, at 6:16 PM, Blair Davis <mailto:the...@wmwisp.net>> wrote: Since you are talking, how about AirPrizm for 2.4GHz? -- On 10/27/2014 6:40 PM, Ben Moore wrote: T

Re: [Ubnt_users] Rocket AC Multi Point

Since you are talking, how about AirPrizm for 2.4GHz? -- On 10/27/2014 6:40 PM, Ben Moore wrote: There are definitely more limitations with 2.4GHz...but there are some performance benefits you can get out of it still... On Mon, Oct 27, 2014 at 4:36 PM, Rory Conaway

Re: [Ubnt_users] Airfiber 24 or 5

thus allowing you to have one of those bumper stickers... http://www.biker-stickers.com/images/BIKERSTICKERSTHREE_6.jpg -- On 10/22/2014 5:19 PM, Daniel Peoples wrote: Mike, that is the answer that I have always gotten, but not anything more specific. As I read it in my abstract, since I own th