I have found that only cloud administrator can delete custom ACL rule. Domain
admin user can only add. That is a bit weird.
Vadim.
-Original Message-
From: Vadim Kimlaychuk [mailto:vadim.kimlayc...@elion.ee]
Sent: Monday, May 25, 2015 2:33 PM
To: users@cloudstack.apache.org
Subject
Hello all,
I couldn’t find “delete” ACL rule button or link. I am able to
create new ACL rules for VPC, but not delete them. Is it supposed to be like
that?
Regards,
Vadim
Hi, Alessandro
I would recommend you to read this article:
http://support.citrix.com/article/CTX122978 Note parts about "VDI remapping".
I would probably do this way: remove all snapshots to be able to coalesce
VDI-s (look for "Advanced Coalescing Scenarios" chapter). Than CS sh
I am planning to do it within a couple of days. Will let you know
Vadim.
From: Jan-Arve Nygård
Sent: Wednesday, May 20, 2015 15:38
To: users@cloudstack.apache.org
Subject: Re: Compatibility of CS 4.5.1 with XenServer 6.5 SP1
I guess it wouldn't be a prob
Vlad,
You should provide a little bit more than that. At least the
following:
1. Hypervisor type and version.
2. Network setup (physical and logical). In brief. I guess you use KVM, so do
you have openvswitch or do you use linux bridge?
3. Cloudstack version and type of zone you are
, Vadim Kimlaychuk wrote:
> Hello all,
>
>
> I have replaced router at my network and after that noticed
> CPVM has stopped to work. Connection to management server has been
> established correctly. Agent state at UI is "UP"
>
> Troubleshooting consol
件人：users
抄送：
主题：Re: CPVM does not listen on port 443
which version of ACS are you using?
Can you check the property values in consoleproxy.properties file? Its at
/usr/local/cloud/systemvm/conf/consoleproxy.properties on CPVM
~Rajani
On Thu, May 14, 2015 at 9:56 AM, Vadim Kimlaychuk wrote:
&
using?
Can you check the property values in consoleproxy.properties file? Its at
/usr/local/cloud/systemvm/conf/consoleproxy.properties on CPVM
~Rajani
On Thu, May 14, 2015 at 9:56 AM, Vadim Kimlaychuk wrote:
> Hello all,
>
>
> I have replaced router at my network an
Hello all,
I have replaced router at my network and after that noticed CPVM has
stopped to work. Connection to management server has been established
correctly. Agent state at UI is "UP"
Troubleshooting console proxy I have found that there is no listener on public
interface port 44
Hello Ian,
Cloudstack should get VM state from cloudstack agent
automatically. Check running SSVM and proxy VM that agent status is "running".
It just takes some time. Whether CS will automatically start VM depends on
compute offering. If you have HA enabled than CS will try to
rk with LB service supported.
-Sanjeev
On Sat, May 9, 2015 at 1:23 AM, Vadim Kimlaychuk
wrote:
> Hello all,
>
>
>I have created VPC and added such network type (at subj) to it.
> The only difference with DefaultIsolatedNetworkOfferingForVpcNetworks?
> offering is that it i
Hello all,
I have created VPC and added such network type (at subj) to it. The
only difference with DefaultIsolatedNetworkOfferingForVpcNetworks? offering is
that it is not listed in VPC networks when I create VM using wizard. I can
only add it using VPC - tier - add VM. And the addr
are
not as expected.
-Sanjeev
On Wed, May 6, 2015 at 1:09 AM, Vadim Kimlaychuk
wrote:
> Hello all,
>
>
> 1. I have created VPC and 2 network tiers.
>
> 2. Added VM to the 1-st one (default). Got IP by DHCP,
> everything works so far.
>
>
ranky Hall :
> I wish that were so easy. :( I have 200 VMs running across 5 hosts,
> and what you described is not a process I have time to learn right
> now. I do appreciate your reply and advice. Thank you!
>
> -Franky
>
> On May 7, 2015, at 9:57 PM, Vadim Kimlaychuk
Hello Franky,
I would not reccomend you to change database tables directly in order
to fix errors in configuration. It is better to set-up cloudstack again with
the proper configuration.
Vadim
From: Franky Hall
Sent: Friday, May 8, 2015 1:22
Hello all,
1. I have created VPC and 2 network tiers.
2. Added VM to the 1-st one (default). Got IP by DHCP, everything
works so far.
3. Added 2-nd network tier to the same VM at run-time. VIF
initialised and I run dhclient for 2nd interface and got IP from 2nd t
Hello all,
I have started to work with VPC and have created one for testing. VR
has started successfully and VM initially got IP address and route, but after
VM restart route does not get back.
I logged into VR and see that no dhcp-server processes are running. Is
it suppose to
Vadim
From: Vadim Kimlaychuk [vadim.kimlayc...@elion.ee]
Sent: Saturday, April 25, 2015 19:19
To: users@cloudstack.apache.org
Cc: dmi...@ant.ee
Subject: RE: CS 4.5.1: Unable to start a VM due to insufficient capacity
Hi Timothy,
I have mounted SS on the slave host manually (didn'
integrity of this communication
has been maintained nor that it is free of errors, virus, interception or
interference.
-----Original Message-
From: Vadim Kimlaychuk [mailto:vadim.kimlayc...@elion.ee]
Sent: 25 April 2015 07:49 AM
To: users@cloudstack.apache.org
Cc: dmi...@ant.ee
Subject: CS
Hello all,
After fresh install for subj. Got problem creating new VM from ISO.
Installing VM from templates is working. Management log said that :
2015-04-25 08:36:32,066 DEBUG [c.c.a.m.DirectAgentAttache]
(DirectAgent-185:ctx-9207cdf3) Seq 2-635851972389374824: Executing request
201
Hi,
When I got several networks on my management server I have noticed,
that SSVM routing table is weird. It works so far, but I don’t understand why
public traffic is routed through local management interface (and NATed) when it
can be sent directly to eth2 ? Isn’t it too complic
open
console using UI. Will look how to fix it.
Vadim.
-Original Message-
From: Vadim Kimlaychuk [mailto:vadim.kimlayc...@elion.ee]
Sent: Tuesday, April 21, 2015 10:20 AM
To: users@cloudstack.apache.org
Subject: RE: Netwok offerings
Geoff,
I am using one NIC (bond) for public and
581
geoff.higginbot...@shapeblue.com
-Original Message-
From: Vadim Kimlaychuk [mailto:vadim.kimlayc...@elion.ee]
Sent: 21 April 2015 07:07
To: users@cloudstack.apache.org
Subject: Netwok offerings
Hi all,
Need you advice regarding network offers. I have ACS with advanced
networking im
what is there.
Then gzip the file (all the files are gzipped, this is how they are served by
default to increase speed).
HTH
Lucian
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
> From: "Vadim Kimlaychuk"
> To: users@cloud
cloudstack UI
Vadim,
That only works for KVM btw. On which ACS version are you? There are different
methods..
Lucian
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
> From: "Vadim Kimlaychuk"
> To: users@cloudstack.apache.org
&g
with public IP address and
that’s it.
Vadim Kimlaychuk
P.S. I use VLAN isolation method for all the networks.
Hello all,
I remember there is an option at CS UI that opens hidden element to
show input field for custom disk size at VM addition wizard. Can someone point
me to the file location I need to change in order to use custom disk size
functionality?
Thank you,
Vadim Kimlaychuk
s with this
OS than any other.
Vadim.
________
From: Vadim Kimlaychuk [vadim.kimlayc...@elion.ee]
Sent: Friday, April 17, 2015 17:52
To: users@cloudstack.apache.org
Subject: RE: Cloudstack 4.5.1: CloudStack-specific Tomcat servlet engine is not
running, but pid file exists
I have did this and
issue when I removed the log files.
First kill all java processes (CloudStack related, if any). Can you try this:
chown cloud:cloud -R /var/log/cloudstack/management
And then try to start the management server again?
> On 17-Apr-2015, at 9:49 am, Vadim Kimlaychuk
> wrote:
>
May be there is something wrong with Ubuntu 14.04.2 ?? Is it suppose to work
there?
Thank you,
Vadim.
-Original Message-----
From: Vadim Kimlaychuk [mailto:vadim.kimlayc...@elion.ee]
Sent: Friday, April 17, 2015 12:51 PM
To: users@cloudstack.apache.org
Subject: RE: Cloudstack 4.5.1: Clou
Vadim.
-Original Message-
From: Vadim Kimlaychuk [mailto:vadim.kimlayc...@elion.ee]
Sent: Friday, April 17, 2015 10:50 AM
To: users@cloudstack.apache.org
Subject: Cloudstack 4.5.1: CloudStack-specific Tomcat servlet engine is not
running, but pid file exists
Hello,
I have a
Secondary storage must contain seeded tepmpaltes. Check them manually. Provide
management logs. Can't say more based on information provided.
Vadim.
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: Friday, April 17, 2015 10:45 AM
To: users@cloudstack.apache.org
Su
/cloudstack-management/bin/bootstrap.jar:/etc/cloudstack/management:/usr/share/cl
but port 8080 is closed and no pid file at /var/run folder. No
tomcat pid either.
Please, help
Vadim Kimlaychuk
integratsiooni arhitekt
tel. 640 2297
mob. 5233474
/cloudstack-management/bin/bootstrap.jar:/etc/cloudstack/management:/usr/share/cl
but port 8080 is closed and no pid file at /var/run folder. No
tomcat pid either.
Please, help
Vadim Kimlaychuk
integratsiooni arhitekt
tel. 640 2297
mob. 5233474
+1
Much much better than the current one. More information on the screen. I have
only one remark : "Notes" -- white text in blue box is readable, but links to
document sections are almost not visible at all. Light-green is probably wrong
colour for them.
Vadim.
-Original Message-
From
Hi,
This is really scary. Can test within couple of days, but I will put
4.5.1 version as 4.5 is broken. Memory snapshots are not available for the
XenServer as far as I know, but they just failed at CS before. Host did crash
definately.
Vadim.
-Original Message-
From: Jan-A
Phillip,
Since you didn't specified hypervisor I presume you kept in mind - KVM
isn't it ? I have had FreeBSD 10.1 guests running there for a short while, but
was not satisfied with performance. GENERIC kernel contains support for
differen hypervisor types, but it seems this support is
Can you see template file is created on secondady storage? May be there is not
enough space somewhere, so transaction to DB was rollbacked ?
Vadim
-Original Message-
From: Sonali Jadhav [mailto:son...@servercentralen.se]
Sent: Thursday, April 02, 2015 11:22 AM
To: users@cloudstack.apach
from
http://packages.shapeblue.com/systemvmtemplate/4.5/ (though I’ll refresh the
systemvmtemplate once 4.5.1 gets released on our hosting server).
Hope this helps.
> On 02-Apr-2015, at 12:36 pm, Vadim Kimlaychuk
> wrote:
>
> So, I clone branch 4.5-RC20150319 (the latest 4.5 at
ce, Covent Garden, London, WC2N
4HS
On 2 Apr 2015, at 07:12, Vadim Kimlaychuk
mailto:vadim.kimlayc...@elion.ee>> wrote:
Dear friends,
Need your advice. I am going to deploy cloudstack to work with
XenServer 6.5 + Advanced Zone + VPC. What is correct version to choose ? To b
Dear friends,
Need your advice. I am going to deploy cloudstack to work with
XenServer 6.5 + Advanced Zone + VPC. What is correct version to choose ? To be
more precise – is it better to compile from the sources 4.5.1 or install 4.4.2
that is officially announced ? Or something els
Hello Daniel,
Cloudstack 4.5 is not recommended to deploy due to bug at VPC. I don't
know exactly if it is connected to VR or CS code, but better wait for 4.5.1
release or deploy other stable release that is officially announced.
BR,
Vadim.
-Original Message-
From: Daniel Koll
Hi,
Crossing fingers, since we are going to start with new cloud instance next week
and want to deploy XenServer 6.5 with VPC. If 4.5.1 will not be officially
announced by the end of next week is it safe to clone 4.5.1-rc1 and compile CS
from the sources??
Vadim.
-Original Message-
M, Leandro Mendes
wrote:
> I've created the vhd from scratch and registered it through cloudstack API.
>
> Thanks.
>
> On Tue, Mar 24, 2015 at 6:08 AM, Vadim Kimlaychuk <
> vadim.kimlayc...@elion.ee
> > wrote:
>
> > Hi, Leanardo
> >
> > How
Hi, Leanardo
How did you register VHD at XenServer? using import or creating VM from
template?
Vadim.
-Original Message-
From: Leandro Mendes [mailto:theflock...@gmail.com]
Sent: Monday, March 23, 2015 9:05 PM
To: users@cloudstack.apache.org
Subject: XenServer (VM_HVM_REQUIRED)
take long, I would wait.
Lucian
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
> From: "Vadim Kimlaychuk"
> To: users@cloudstack.apache.org
> Sent: Monday, 23 March, 2015 09:23:48
> Subject: RE: CloudStack 4.5 release
>
ld be rather safe to use it, but otherwise
wait for 4.5.1.
--
Erik
On Mon, Mar 23, 2015 at 10:04 AM, Vadim Kimlaychuk < vadim.kimlayc...@elion.ee>
wrote:
> Hi,
>
> 4.5.1 can't go before 4.5 release, isn't it ? As I can see on
> the web - documentation for 4.
Hi,
4.5.1 can't go before 4.5 release, isn't it ? As I can see on the web -
documentation for 4.5 release is ready, but binary packages seems to be not.
Sonali, if you clone GIT branch 4.5 and compile by yourself it should be
ready for use. I hope this work because I am going to do i
O.
>
> So far, I have been hearing people advocating RAID 10 as well as RAID
> 6. I am personally leaning towards RAID 6, but I would love to get
> some input from someone with more experience using these different
> RAID levels in production.
>
> --
> Mads Nordholm
>
&
y is everythgin so slow, etc...
For our next cloud, I'm going with ZFS/NFS definitively...
Be warned :)
Cheers
On 3 March 2015 at 13:15, Vadim Kimlaychuk
wrote:
> Mads,
>
> CEPH is good indeed, but keep in mind that you should really
> be expert at this type of SD
Mads,
CEPH is good indeed, but keep in mind that you should really be expert
at this type of SDS. There are points that are not visible from the first look
and may bring some unpleasent surprises. For example: "default" option for
storage I have tested was to make snapshots automatical
Vadim,
While I'm yet to test XS 6.5 personally, it should work. There is an on-going
thread on the dev ML that may interest you:
http://markmail.org/thread/3xeoqxs2zzxvbktw
On Wednesday 14 January 2015 02:32 PM, Vadim Kimlaychuk wrote:
> Hello all,
>
> It seems ther
Hello all,
It seems there are no major differences at XAPI toolstack at XS 6.5
that uses CS to work with XenServer. Shouldn’t it be possible to use newely
released XS 6.5 right away? Or modification to CS is still needed?
Regards,
Vadim Kimlaychuk
If you try to pull tag = "0.1.4" like:
docker pull runseb/cloudstack:0.1.4
then you don't have this error. But I am still unable to launch the container.
Jetty server generates JAVA error stacktrace.
It seems maintainer must add latest tag to repository and give more information
about how to
Tejas,
"Stopped" and "Destroyed" are "visible" statuses of VM at dashboard as
well as "Expunding". You should put "Expunded" for the VM not to be visible.
Entirely removing the raw in DB is not good option. CS does not ever remove
data for VM-s being destroyed and expunded - they alway
For XenServer it will be VHD files. Make Template from VM, download it, import
it and re-create VM from template. Should work theoretically.
Vadim.
-Original Message-
From: Billy Ramsay [mailto:bram...@dynamicquest.com]
Sent: Thursday, December 11, 2014 10:35 PM
To: users@cloudstack.ap
under CS create VM
from default „Other 64 bit“ template and print out „xe vm-param-list
uuid=$VM-UUID“ ?? I would be very thankful for this output. It seems default
templates are different.
Regards,
Vadim Kimlaychuk
CS does not support memory snapshots for XenServer. Disk snapshots are working.
Not sure about VmWare, but I guess it should be the same. I thought the
reachest feature-set is developed for KVM. But if it does not support memory
snapshots - I wonder wich hypervisor does it ? This option at user
As far as I know -- network offer with LB is only available for VPC and you
must expicitly select it for specific subnet. For shared network it is not
available.
Vadim.
-Original Message-
From: Erik Weber [mailto:terbol...@gmail.com]
Sent: Monday, December 08, 2014 12:34 AM
To: users@
Hi Motthy,
It also happend to me several times. The only way I solved it --
updated the apropritate field at database.
Vadim.
-Original Message-
From: motty cruz [mailto:motty.c...@gmail.com]
Sent: Saturday, December 06, 2014 8:11 PM
To: users@cloudstack.apache.org
Subject: AC
ers, my test case: 2
>>> VMs (both on same physical
>>> host!) emulated intel NICs - iperf gives arround 1.2 Gbps. Same
>>> setup, virtio NICs - iperf gives 8.9Gbps - default iperf options, no
>>> tuning nothings...
>>>
>>> On 3 December 2014 at
Motty,
I would ask even more stupid question than Andrija did --- do you have
100Mb physical network? 200Mb seems to be exactly double of this (as NIC
working in full duplex) and VR and VMs may be on different hosts. So you can't
physically have more than that :)
Vadim
__
Hi Alessandro,
I think default NIC is tightly coupled with default route and default
GW. You may have several NICs at your system but only once is used for
communication to outside world. If you have several shared networks choose one
that is connected to Internet as default. If both c
e required for it to actually boot on ESXi.
Best regards,
Kirk
On 12/02/2014 02:16 AM, Vadim Kimlaychuk wrote:
> Hello all,
>
> Can anyone suggest tool to convert KVM and XenServer VM guest
> images into VMDK in order to import them later into Cloudstack? We are going
> t
Hello all,
Can anyone suggest tool to convert KVM and XenServer VM guest
images into VMDK in order to import them later into Cloudstack? We are going
to build VmWare Zone and guests must migrate there.
Thank you for tips,
Vadim Kimlaychuk
Hi Aschim,
Which zone are your trying to configure - basic or advanced? Did you
use "security groups" as isolation method? In the latter case you should switch
to bridge mode as Erik suggested.
I guess you may also have problem with primary storage registered at
your XenServ
Hi,
Here are my thoughts. Correct me if I am mistaken.
Pros:
- OVS should give more control over network than usual Linux bridge.
CS has OVS plugin for that. Can't use it, because of (see below).
- XenServer uses OVS by default (though trough XAPI).
Cons:
- It
;>>> Networks.
> >>>>>>
> >>>>>> Regards
> >>>>>>
> >>>>>> Geoff Higginbottom
> >>>>>>
> >>>>>> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
1
192.168.0.0 0.0.0.0 255.255.255.0 U 0 00 eth2
192.168.0.0 0.0.0.0 255.255.255.0 U 0 00 eth3
Cheers,
Dan
2014-11-25 2:01 GMT-06:00 Vadim Kimlaychuk :
> Dan,
>
> Cloudstack guides are not perfect indeed and general rule
XenServer does not need any package to be expicitly installed. When you add
host to CS it copies some files to the host itself and you don't need to bother
about them usually.
Vadim.
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: Tuesday, November 25, 2014 4:5
I do prefer 4.4 as well because it has GPU sharing and we actively test it.
Other bugs are not so important for us right now.
Vadim.
-Original Message-
From: Nux! [mailto:n...@li.nux.ro]
Sent: Tuesday, November 25, 2014 4:48 PM
To: d...@cloudstack.apache.org
Cc: users@cloudstack.apache
gt;>>>>>>> question now :)
>>>>>>>> thx folks
>>>>>>>> On 24 November 2014 at 18:01, Adrian Lewis
>>>>>>>>
>>>>>>>> wrote:
>>>>>>>>>
t; >>> thxs
> > >>>
> > >>>> I hate to see people leaving CloudStack as I think it's
> > >>>> fantastic
> > >>> project and a really great community!
> > >>>> Andrei
> > >>>>
> > >
==
Cheers,
Dan
2014-11-23 7:51 GMT-06:00 Vadim Kimlaychuk :
> Hello Dan,
>
> Sorry for the late reply, have to be out from internet
> sometimes
> :)
> You have problem with routing. According to arp table default
> interface -- eth2 it is not connected to
after that is supported, we will need to wait some time for the CloudStack
implementation on this ?
Thanks anyway
On 24 November 2014 at 15:00, Vadim Kimlaychuk
wrote:
> Hi Andrija,
>
> For XenServer 6.2 it is not possible yet. Look for supported
> SR-s
> here:
> htt
Hi Andrija,
For XenServer 6.2 it is not possible yet. Look for supported SR-s here:
http://docs.vmd.citrix.com/XenServer/6.2.0/1.0/en_gb/reference.html#ck_reference_storage_repository_types
Somewhere in internet I saw information that RBD support is scheduled
for the next major X
ternet etc., e.g, from
KVM host itself)
Cheers,
Dan
2014-11-19 1:23 GMT-06:00 Vadim Kimlaychuk :
> Dan,
>
> I would suggest you to use external proxy/GW to hide you network. Not the
> same host that contains management server. Because if you would like to
> scale it up - how
e jobs with a simple scripting but taking image from
> VMs depends on your type of hypervisor
>
> ---- Original message
> From: Vadim Kimlaychuk
> Date: 19/11/2014 21:55 (GMT+03:30)
> To: users@cloudstack.apache.org
> Subject: RE: VM migration to cloudstack
&
Anil,
Look my thread "VM migration to CS" -- basically you need to export VM
and import after host is being added to Cloudstack. The main reason for that
is UUID of the resources registered by Cloudstack at database. Storage,
networks, vifs -- all IDs are managed by cloudstack and obv
Subject: Re: VM migration to cloudstack
Basicaly, convert existing vms to qcow2 or vhd or vmdk... upload template
to ACS, deploy new VM from template...
Not sure of other way ?
Sent from Google Nexus 4
On Nov 19, 2014 5:35 PM, "Vadim Kimlaychuk"
wrote:
> Hello,
>
>Ho
Hello,
Hope this problem has already risen and been solved: have VM-s running
on stand-alone hypervisors (Xen, KVM, VmWare) and need to "export-import" them
into cloudstack. Are there any instructions/tools to automate this process?
Thanks,
Vadim.
Hello all,
I saw the table in CS docs with limits of VLANs number depending on
hypervisor. I can roughly remember that XenServer and KVM can use entire range
of 0-4096, but VmWare (or vCenter) can address less. Can’t find this
information anymore.
People who use VmWare
ternet.
Cheers,
Dan
2014-11-18 3:20 GMT-06:00 Vadim Kimlaychuk :
> Hello Dan,
>
> It seems there is something wrong with your network setup and
> here are some places to search:
> 1. Why your management server has 2 NICs? It should not work as NAT,
> proxy or any kind
Will fix my last point - KVM should have at least 2 bridges, not necessarily
interfaces - public/private.
Vadim
-Original Message-
From: Vadim Kimlaychuk [mailto:vadim.kimlayc...@elion.ee]
Sent: Tuesday, November 18, 2014 11:21 AM
To: users@cloudstack.apache.org
Subject: RE: To let
Hello Dan,
It seems there is something wrong with your network setup and here are
some places to search:
1. Why your management server has 2 NICs? It should not work as NAT, proxy or
any kind of switch - keep this in mind.
2. SSVM normally has to have 3 interfaces (at least). One -- wi
Hello Mohhamad,
I think your words would be more valuable if you add some facts to
this discussions. It is really hard to understand how deep have you been
involved into different cloud platforms evaluation and what these platforms
were. It seems you haven't tried more than just "demo
1
2014-11-12 1:46 GMT-06:00 Vadim Kimlaychuk :
> Hello,
>
> It might happen if you have basic zone setup. We have
> implemented such configuration with XenServer, but it is confusable
> indeed. It is better to have differen LAN-s (VLANs) and partition the network
>
Hello,
It might happen if you have basic zone setup. We have implemented such
configuration with XenServer, but it is confusable indeed. It is better to have
differen LAN-s (VLANs) and partition the network properly. External L2/L3
switch is also a requirement.
Vadim.
-Origina
Hello all,
I have created my own network offer for shared private networking with
SNAT. Have tried to use it, but it didn't work. The problem came later when I
tried to release IP and destroy the VM. All the actions returned "Internal
server error". I was unable to release IP and my test
Hi,
I believe it is the same issue that already described here.
Try to check if you have mysql-connector-java.jar at you usage lib. If
you don't then create symlink:
ln -s /usr/share/java/mysql-connector-java.jar
/usr/share/cloudstack-usage/lib/mysql-connector-java.jar
4.4.1 : unable to delete ISO/Template
I have clean 4.4.1 - click on the ISO, there is ZONE tab - click on that tab -
and then there should be icon for deletion... - so it is not on the DETAILS
tab, but on the ZONEs tab
On 5 November 2014 13:22, Vadim Kimlaychuk
wrote:
>
Hi all,
After update from 4.4.0 -> 4.4.1 I am unable to delete registered
ISO/Template. This icon is disappeared. I can download ISO or register ISO – no
problem, but not to delete. What should I look for to fix the problem?
Thank you,
Vadim
PS. I have restarted management server
I am sure you can find a lot of different articles about Gluster/Ceph
performance. Here is one of them:
http://iopscience.iop.org/1742-6596/513/4/042014/pdf/1742-6596_513_4_042014.pdf
I think it is not good to use CephFS with CS as it is FUSE and require
additional layer to perform. As Andrija
-d IPaddress -u cloud -p password -a >
> > sysvm.log 2>&1 &
> >
> > but I run that command any way:
> >
> > Also I log in to my database server:
> >
> > ALTER TABLE `snapshot_policy` ADD `display` TINYINT( 1 ) NOT > NULL
> > DEFAULT
Hi all,
Wish to participate at this "holly war" as well :)
I am using KVM for hosting managment servers and other infrastructure that is
outside of the cloud and XenServer 6.2 for cloud hosts.
1. Snapshotting : were problems with old version of virsh/qemu, but for
1.2.2/2.0 snapshotting is worki
I would also add a point about networking - hypervisors use different approach
for traffic labelling. We tried to combine Xen and KVM within one zone of
"advanced networking" and failed. KVM has to have different bridges for
public/private networking while Xen uses one bridge per-physical NIC.
0 October 2014 11:36, Vadim Kimlaychuk
wrote:
> Hi,
>
> I would also like to hear more about best practices for
> network architecture, but so far have found only VLAN isolation
> described more or less thoroughly.
> 1. We have recently set up VLANs and didn
Hi,
I would also like to hear more about best practices for network
architecture, but so far have found only VLAN isolation described more or less
thoroughly.
1. We have recently set up VLANs and didn't fill the limit yet. :) GRE
is one of the options, but can't say how it wor
the
> > > > same
> > bad
> > > > result. has anybody successsfully upgrade from ACS 4.4.0 to
> ACS-4.4.1?
> > if
> > > > yes do you mind sharing notes?
> > > > I had used this URL:
> > > >
> > >
> >
> http://clou
Hi,
We are using both and I can't say one is faster than other. It
all depends. I believe that KVM can even beat XEN if you are using
"pass-through" mode. You may Google around to see different tests that have
being already done. There are a lot.
1. KVM is "fully virt
101 - 200 of 253 matches
Mail list logo
