D": "61f.b845fdd7",
"db_id": "16589275485323",
"state": 4,
"user_flags": "DISPATCHED_FLG",
"timestart": 1708744350,
"datestart": "2024-02-24 06:12:30"
Hi all,
My network scheme is
softphone <-nat-external network-nat-> opensips <-local network-> sip
servers <-local network-> softphone
No b2b or topology_hiding modules are used.
Opensips versions I tried: 3.4.4-1 and 3.4.3-1.
I make a call from a phone behind nat to sip server via opensips, so I
Hi,
Are there any plans to introduce JSON log format and systemd-journal
integration?
Thanks,
Xaled
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
a lot in money. But, if it is difficult to make control of the "call duration" per "interval", then "it is better, then nothing". Your idea decrease (in combination of the "total calls") a number of successful minutes than we can get now.But this feature should
k you -- С уважением, Денис.Best regards, Denis 09.06.2018, 15:11, "Liviu Chircu" :Hi Denis,If these are your tests:1. 101 06.06.2018 15:34:542. 0 06.06.2018 15:38:21Then the 1st one should return -2 ("call duration" criti
Hello! Liviu, can i be sure, that you will analyze my question? Thank you. -- С уважением, Денис.Best regards, Denis 06.06.2018, 16:28, "Denis via Users" :And a final i made some tests and found that subsequent calls falls to this case"case 1: if ($avp(3000)=="1"
And a final i made some tests and found that subsequent calls falls to this case"case 1: if ($avp(3000)=="1") xlog("L_INFO", "Route4:$rm was received (IPS=$si, IPD=$rd, CALLID=$ci, FROMTAG=$ft, TOTAG=$tt, AUTH=$au) and FRAUD: case 1");" -- С уважением,
"Forbidden"); exit; break; case -3: if ($avp(3000)=="1") xlog("L_INFO", "Route4:$rm was received (IPS=$si, IPD=$rd, CALLID=$ci, FROMTAG=$ft, TOTAG=$tt, AUTH=$au) and FRAUD failure"); $avp(501)=$ft+$ci; $avp(501)=$(avp(501){s.md5}); acc_db_
Hello, Liviu! It is me, again:))) One more, call_duration measured in seconds or in minutes? Thank you. -- С уважением, Денис.Best regards, Denis 27.04.2018, 09:25, "Denis via Users" :Hello, Liviu!OK, i understand..But, to speak the truth, it would be more reasonable to control exact
ry storage. Fraud_detection, for example. What about such services? Thank you. -- С уважением, Денис.Best regards, Denis ___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
calling to the same number in a some time period. Anyway, thank you! -- С уважением, Денис.Best regards, Denis 26.04.2018, 08:22, "Liviu Chircu" :Yes, exactly. Apologies for my incomplete example scenario!Best regards,Liviu ChircuOpenSIPS Developerhttp://www.opensips-solutions.comOn 26.
Hello, Pasan! Yes, i found where new port has been changed. Thank you. -- С уважением, Денис.Best regards, Denis 24.04.2018, 12:15, "Pasan Meemaduma via Users" :Hi Denis, Did you try to print the ruri port $rp before and after changes ?. is there any function call that could
ever exceed 1.In my case i have only ONE prefix - 810 - and, although, user were dial different numbers but with common prefix (810) "sequential calls" increased by one every call. And when counter reached predetermined value calls have started blocking. Am i right? Thank you. -- С уважение
t has such value is "sequential_calls_critical". Another counters are long away from this value. Anyway you doubt that "sequential_calls_critical" is the reason of call`s block? Thank you. -- С уважением, Денис.Best regards, Denis 24.04.2018, 12:41, "Liviu Chircu" :H
ent numbers but module detects fraud anyway. -- С уважением, Денис.Best regards, Denis 19.04.2018, 18:14, "Liviu Chircu" :Hi Denis!Good catch! For the first time, I documented a parameter, but forgot to export it for the script writer as well! :)It is now fixed. Thank you!Che
t;;$rd="3.3.3.3";" The question is why does Opensips, in such scheme, send request to the port 5105? Thank you -- С уважением, Денис.Best regards, Denis 2018/04/24 10:34:10.601677 1.1.1.1:5060 -> 2.2.2.2:5060
INVITE sip:12345678@2.2.2.2 SIP/2.0
Record-Route:
Hello, Liviu! I had installed latest Opensips 2.2 (Opensips 2.2.6) In a log file, during start of Opensips, i can seeERROR:core:set_mod_param_regex: parameter not found in module Where is mistake? Thank you. -- С уважением, Денис.Best regards, Denis 13.04.2018, 09:49, "Denis via Users
Ok, thank you -- С уважением, Денис.Best regards, Denis 12.04.2018, 14:23, "Liviu Chircu" :Use $Ts [1] to get the current UNIX timestamp in seconds.[1]: http://www.opensips.org/Documentation/Script-CoreVar-2-4#toc91Liviu Chircu
OpenSIPS Developer
http://www.opensips-solutions.comOn
Liviu, is there any way to find out current time from Opensips during call processing (some functions, variables etc which i can use in opensips.cfg)? Thank you -- С уважением, Денис.Best regards, Denis 12.04.2018, 13:50, "Liviu Chircu" :Hi Denis,The fraud detection module h
ips? Thank you. -- С уважением, Денис.Best regards, Denis 10.04.2018, 12:28, "Liviu Chircu" :Hi Denis,Yes, the "sequential calls" holds the size of the last batch of callssent to the same number. For example, if a user were to dial 44 and 45prefixes in a round-robin manner
fter 19:00 make some actions. How can i check time of the call processing? Thank you. -- С уважением, Денис.Best regards, Denis 05.04.2018, 14:54, "Liviu Chircu" :Hi Denis,I have fixed the sequential calls to also reset on interval / day change, as well as adding a new param on the 2.3 and
Ok, i will check it. And what about "sequential call"? Should i make TT? P.S. I will ask you about one thing yet.Can i detect current 'time' using Opensips script? And compare it someway? Thank you. -- С уважением, Денис.Best regards, Denis 04.04.2018, 15:13, "Liviu Ch
src_domain: 1.1.1.1 src_out: 11 dst_in: 2 dst_user: 2 dst_out: 2 dst_domain: 2.2.2.2 duration: 3ms_duration: 2517 setuptime: 11 created: 2018-04-04 14:45:22 I.e. time from acc and time from unix shell command are the same. -- С уважением, Денис.Best regards, Denis
Денис.Best regards, Denis 03.04.2018, 18:28, "Liviu Chircu" :Hmmm... indeed, the "sequential calls" only reset if you dial a different number.If the other stats reset at midnight/interval change, I don't see why this specific one should be different. To me, it looks li
question about "sequential_calls". This counter does not reset? Even in manual mode? Thank you. -- С уважением, Денис.Best regards, Denis 03.04.2018, 15:30, "Liviu Chircu" :Hi Denis,Regarding the "52 calls" vs. 25/30 limits, are you sure all 52 calls were made by th
Hello! Is there any idea about the problem? Thank you. -- С уважением, Денис.Best regards, Denis 16.03.2018, 15:22, "Denis via Users" :Hello! I am sorry that it was early, but anyway. Server:: OpenSIPS (2.2.5 (x86_64/linux)) Fraud_module has been activated. Profile data 17.0
, Денис.Best regards, Denis ___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
insert it automatically or i should do it manually? Thank you. -- С уважением, Денис.Best regards, Denis 05.12.2017, 18:37, "Răzvan Crainea" :Hi, Denis!Check the new xml module[1]. You can use it to build the XML in the example.[1] http://www.opensips.org/html/docs/modules/2.3.x/xml.htm
Hello, Razvan! I want to ask to analyze the example. Can i add exactly such body, in the such format, and if possible, how?In [1] we have only one param. "body". How can i from this param? Thank you. -- С уважением, Денис.Best regards, Denis 05.12.2017, 17:21, "Răzvan Crainea&
/389OOlLX3QKx27 Can i do it, using Opensips? Thank you for any help. -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
, epoll_et, sigio_rt, select.git revision: ef09a3fmain.c compiled on 07:49:47 Apr 6 2017 with gcc 5.4.0 Core file is herehttps://yadi.sk/i/dHHtQ8-s3NiyiD -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensips.org
http
Hello, Brian Opensips 2.2. (i have a problem with 2.3)? And what should i rebuilt, what node? -- С уважением, Денис.Best regards, Denis 22.09.2017, 01:04, "Brian :" :Hi DenisWe had similar issue recently with radius accounting in a single node in a 2.2 cluster. Rebuilding the node fr
up. -- С уважением, Денис.Best regards, Denis 21.09.2017, 16:39, "Denis via Users" :Bogdan, Prehistory. I decided to migrate Opensips from 2.2. to 2.3.Using my test VirtualBox (ubuntu server) i installed 2.3., prepare opensips.cfg an so on. On VB 2.3. started without any problem.I have
ctory '/distr/opensips-2.3/modules/aaa_radius'/bin/sh: 1: pkg-config: not found/bin/sh: 1: pkg-config: not foundCompiling rad.cCompiling aaa_radius.cLinking aaa_radius.somake[2]: Leaving directory '/distr/opensips-2.3/modules/aaa_radius'" Something like this)). -- С уважен
us module. Yes, /etc/radiusclient-ng/radiusclient.conf exits on backup, it has the same rights as the same file on main server. I can read this file and write into it ,i.e. it is not "broken". libradius has been installed from ubuntu`s repo. -- С уважением, Денис.Best regards, Denis 21.09.2017, 12
Hello! Opensips 2.3.Core file in attachment The problem with aaa_radius module. Thank you for any help. -- С уважением, Денис.Best regards, Denis [BEGIN] 20.09.2017 18:01:52
root@opensips-reserv:/opensipscore# gdb /usr/local/opensips2.3/sbin/opensips
core
GNU gdb (Ubuntu 7.11.1-0ubuntu1~16.5
Hello, Vlad! It seems, that something wrong on my test Virtual server. I installed two proxies in two different servers (production) and there are no problems with cluster module. Link is up in both proxies. Sorry for worry about it. Thank you. -- С уважением, Денис.Best regards, Denis
Hello! Is there any information about problem? Thank you. -- С уважением, Денис.Best regards, Denis 08.09.2017, 13:46, "Denis via Users" :Hello, Vlad! Sorry for long answer. So, here (https://yadi.sk/i/j9a4CZhS3MiJEm) you can find the log file. In this file i tried to display info
Yes, Alain, but i thought it would be more prettily:)). -- С уважением, Денис.Best regards, Denis 12.09.2017, 17:01, "Alain Bieuzent" :Denis, you can do it with subst_uri like : subst_uri('/(sip:.*);transport=tcp/\1/'); Regards De : Users <users-boun...@lists.opensips.o
Hello! Opensips 2.3 On dispatcher add sock_hdrOn proxy use 's' flag in save() function get such error on proxy"ERROR:registrar:set_sock_hdr: non-local socket" What am i doing wrong?Thank you for any help. -- С уважением, Денис
Hello! Should Opensips change "transport" parameter from tcp to udp in RURI during transition from one protocol to another? Opensips 2.3 Thank you. -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensip
). -- С уважением, Денис.Best regards, Denis 12.09.2017, 10:57, "Serge S. Yuriev" :Hi Would you mind to share your experience with us?Thanx.--Wbr, Serge via mobile12.09.2017, 10:20, "Denis via Users" <users@lists.opensips.org>:Hello! I found solution myself. The question
Hello! I found solution myself. The question is closed. -- С уважением, Денис.Best regards, Denis 08.09.2017, 14:51, "Denis via Users" :Hello! Opensips 2.3 One interesting question about rtpproxy using. I can use multiple rtpproxy through one set. During each call Opensips choos
elp. -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
proxyopensipsproxyctl.sh - script for the second proxy1.1.1.1 - IP of the server (as i mentioned below both proxies are on the same server). Thank you for any help. -- С уважением, Денис.Best regards, Denis 30.08.2017, 13:05, "Vlad Patrascu" :Hi Denis,I can't really tell what the prob
Hello Liviu! Now it is work. Thank you. -- С уважением, Денис.Best regards, Denis 29.08.2017, 20:00, "Liviu Chircu" :Hi Denis,I just pushed a fix for this down to 2.3. Please let me know if all is good on your side as well.Regards,Liviu Chircu
OpenSIPS Developer
http://ww
Hello! Any information about the problem? Thank you. -- С уважением, Денис.Best regards, Denis 25.08.2017, 16:51, "Denis via Users" :Hello! Back to 2.2.5 resolved the problem. I got replication of, for example, dialog/profile-- С уважением, Денис.Best regards, Denis 24.08.2
Hello! Recently i wrote about problems with clusterer module. -- С уважением, Денис.Best regards, Denis 28.08.2017, 17:44, "Liviu Chircu" :Hi all,An OpenSIPS 2.3 minor release bump has been scheduled for Thursday, Aug31st. If you happen to have any GitHub OpenSIPS issues or maili
Hello! Back to 2.2.5 resolved the problem. I got replication of, for example, dialog/profile-- С уважением, Денис.Best regards, Denis 24.08.2017, 17:46, "Denis via Users" :Hello! I am developing VoIP architecture with two proxies and one LB.Between these proxies i have a clus
292 ecr 65448292], length 0 As you can see node 1 cannot see node 2 (Link_state=Probe). The question is why? Thank you. -- С уважением, Денис.Best regards, Denis ___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
e the X-lite softphone (has been using for testing 2.2.) with PCMA or PCMU codec. Thank you for any help. -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hello Razvan! With [1] i could make it working.Thank you. -- С уважением, Денис.Best regards, Denis 06.06.2017, 13:28, "Răzvan Crainea" :Hi, Denis!Are you sure that the two opensips instances are reachable? Can you execute the 'clusterer_list' command on both servers
am("dialog", "accept_replicated_dialogs", 1)
modparam("dialog", "replicate_dialogs_to", 1)
modparam("dialog", "accept_replicated_profiles", 1)
modparam("dialog", "replicate_profiles_to", 1)
modparam("dialog", "rep
normally. -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hello, Bogdan! Thank you. One more. How can i access a "nonce" value from 401 reply, during REGISTER transaction? Thank you. -- С уважением, Денис.Best regards, Denis 22.05.2017, 17:39, "Bogdan-Andrei Iancu" :Hi Denis,Just be sure :1) during authentication, your proxy/r
is, can i do it?Will Opensips work correctly in such scheme, including authentication procedure of the Call or Register processing? Thank you for any help. -- С уважением, Денис.Best regards, Denis ___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hello, Bogdan! Is there any additional information that i should gather about problem?Or everything is clear? Thank you. -- С уважением, Денис.Best regards, Denis 06.04.2017, 15:18, "Denis via Users" :Bogdan, I copied tar to the backup server and restore opensips from tar there (o
t;p_cell" in current context.(gdb) p p_cell->uas.requestNo symbol "p_cell" in current context.(gdb) p p_cell->uas.statusNo symbol "p_cell" in current context. -- С уважением, Денис.Best regards, Denis 06.04.2017, 14:38, "Bogdan-Andrei Iancu" :Oh, that is g
Before making upgrade i made tar archive of the directory where opensips has been installed. Can this help us?It was crash on time only. I do not think, that o can reproduce it. -- С уважением, Денис.Best regards, Denis 06.04.2017, 12:27, "Bogdan-Andrei Iancu" :yeah, the opensips
rrent context. -- С уважением, Денис.Best regards, Denis 06.04.2017, 11:08, "Bogdan-Andrei Iancu" :Hi Denis,Please get some more info from the corefile : f 10 p p_cell->method.s p p_cell->uas.request p p_cell->uas.statusThanks,Bogdan-Andrei Iancu
OpenSIPS Founder an
ason. -- С уважением, Денис.Best regards, Denis 05.04.2017, 15:02, "Bogdan-Andrei Iancu" :Hi Denis,Thank you for your help - the problem was found and fixed in head, 2.3 , 2.2 and 1.11 versions.Please update from GIT and give it a try. Let me know if it works for you now.Best regards,Bo
Ok, Bogdan, I'll be waiting any result. Thank you. -- С уважением, Денис.Best regards, Denis 05.04.2017, 11:53, "Bogdan-Andrei Iancu" :Hi Denis,Many thanks for the output - this confirm a suspicious of mine in regards to the cause of the crash - let me try to see if we can repr
ry at address 0x20 and so on with at address 0x20 -- С уважением, Денис.Best regards, Denis 04.04.2017, 18:43, "Bogdan-Andrei Iancu" :Super :)we got to something useful.Now, again in GDB please do:f 5p *dlg->cbs.firstp *dlg->cbs.first->nextp *dlg->cbs.first->n
Yes, without routeid Opensips returns 404 code! -- С уважением, Денис.Best regards, Denis 04.04.2017, 17:59, "Bogdan-Andrei Iancu" :And if you remove the routeid (in the rule definition), does the routing works ok ?Regards,Bogdan-Andrei Iancu
OpenSIPS Founder and Develo
I will check it and tell the result -- С уважением, Денис.Best regards, Denis 04.04.2017, 17:59, "Bogdan-Andrei Iancu" :And if you remove the routeid (in the rule definition), does the routing works ok ?Regards,Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://ww
in frame 2". What does it mean? -- С уважением, Денис.Best regards, Denis 04.04.2017, 16:35, "Bogdan-Andrei Iancu" :Any CRITICAL message into the log before the crash ?also, in gdb in frame 2, please print: p *((struct qm_frag*) ((char*)p-sizeof(struct qm_frag))) Thanks,Bogda
No, i don`t -- С уважением, Денис.Best regards, Denis 04.04.2017, 16:22, "Bogdan-Andrei Iancu" :Do you do an "drop" or "exit" in that routeid ??Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
OpenSIPS Summit May 2017 Amste
Best regards, Denis 04.04.2017, 14:51, "Bogdan-Andrei Iancu" :OK,please enter gdb and print: p shm_block->first_frag p shm_block->last_frag_end p mem_block->first_frag p mem_block->last_frag_endThanks,Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
because there is no provisioning message after 100 Trying from Opensips. -- С уважением, Денис.Best regards, Denis 04.04.2017, 14:14, "Bogdan-Andrei Iancu" :Hi Denis,Again, as drouting is not doing any signalling action, it CANNOT block/freeze your OpenSIPS.Use script_trace()
BG_MALLOC, FAST_LOCK-ADAPTIVE_WAITADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.git revision: 7922417main.c compiled on 06:29:28 Mar 23 2017 with gcc 5.4.0 -- С уважением, Денис.Best regards, Denis 04.04.
Hello! Server:: OpenSIPS (2.2.3 (x86_64/linux)) Thank you for any help. P.S. Opensips has been compiled with QM_MALLOC and DBG_MALLOC flags -- С уважением, Денис.Best regards, Denis #0 0x7fe069215428 in __GI_raise (sig=sig@entry=6) at
../sysdeps/unix/sysv/linux/raise.c:54
resultvar
[1301:1538288757] with clid '84253MzdiNGJmNzcwYjI1OTE2NmE2ZDUyNGJmZWJiYWQ3NTM' and tags '2c479443' 'NULL'Mar 28 09:38:28 ubuntu-amd64 /usr/local/opensips2.2/sbin/opensips[7170]: DBG:core:destroy_avp_list: destroying list 0x7f77f3c8ed08Mar 28 09:38:28 ubuntu-amd64 /usr/lo
Hello, Bogdan! Is there any idea about problem? Thank you. -- С уважением, Денис.Best regards, Denis 24.03.2017, 07:52, "Denis" :Hello! It does not work.Opensips "freezes" a call. In syslog i see "INFO:drouting:do_routing: All the gateways are disabled" -- С
Hello! It does not work.Opensips "freezes" a call. In syslog i see "INFO:drouting:do_routing: All the gateways are disabled" -- С уважением, Денис.Best regards, Denis 23.03.2017, 18:42, "Bogdan-Andrei Iancu" :Hi,You should do : if (!do_routing(...) ) {
the gateways are disabled". Thank you. -- С уважением, Денис.Best regards, Denis 20.03.2017, 17:20, "Bogdan-Andrei Iancu" :Failure route does not help you if your routing does not start at all - if do_routing() returns negative. Again, in request route, test the return code for
Ok, thank you. I will try. -- С уважением, Денис.Best regards, Denis 22.03.2017, 16:21, "Răzvan Crainea" :Hi, Denis!Please recompile opensips with QM_MALLOC and DBG_MALLOC flags. This will provide more information about your crash.You can use this[1] tutorial to enable QM_MALLO
Hello! Server:: OpenSIPS (2.2.2 (x86_64/linux)) Information from the core you can find here https://yadi.sk/i/Kr0nzENF3GF9VM Thank you for any help. -- С уважением, Денис.Best regards, Denis ___
Users mailing list
Users@lists.opensips.org
http
d below. Thank you. -- С уважением, Денис.Best regards, Denis 20.03.2017, 15:24, "Bogdan-Andrei Iancu" :Hi Denis,I suspect a scripting error on your side. If all the destinations are disabled, the do_routing() returns a negative code into the script - you need to handle this case and send
ank you for any help. -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
look log), makes call to the alternative direction (present in dr_carriers) in case of $avp(1229)==1 (have a look cfg) and $var(radius) !==1 (have a look cfg)? Thank you. -- С уважением, Денис.Best regards, Denis ___
Users mailing list
Users
Hello, Razvan! 1) I found what the problem was. The question is closed.2) To your notice. -- С уважением, Денис.Best regards, Denis 09.02.2017, 15:38, "Denis via Users" :Hello Razvan! I am sorry for long answer, only now could return to these questions. So 1) I run rtpproxy_start
that "/" is a valid character, but, to speak the truth, did not invite it in any call-id before. Only when started using topo_hiding with Opensips. May i ask to make some patch to remove "/" from callid generation? Thank you.-- С уважением, Денис.Best regards, Denis 04.01.2017,
regards, Denis 08.02.2017, 10:46, "Johan De Clercq" :as long as your sql instances are in perfect sync and if you use dialogs with db in realtime, it should work.I think however that it is much better to share an instance of mysql instead of using one for each opensips with replication . 20
question is, if active Opensips will fail, will standby Opensips be handle dialogs properly which have been initiated on active one early? Thank you. -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensips.org
http
Hello, Bogdan! Could you, please, tell me how can i checked, that the version of Opensips is latest? Thank you. -- С уважением, Денис.Best regards, Denis 05.02.2017, 19:05, "Bogdan-Andrei Iancu" :Hi Denis,First, be sure you use the latest 2.2 from GIT.Now, the crash indicates a memory
Hello! Server:: OpenSIPS (2.2.2 (x86_64/linux)) Information from the core file: https://yadi.sk/i/IfhdM1Y83CQvPk Thank you for any help. -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensips.org
http
you for any help. -- С уважением, Денис.Best regards, Denis ___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
compile bcg729, or it needs exactly for extractaudio? Thank you. -- С уважением, Денис.Best regards, Denis 27.12.2016, 11:27, "Flavio Goncalves" :Hi, Yes you can extract audio from rtpproxy. The extractaudio utility is very handy and you can compile with G.729 from the linphone project bcg
Hello, Bogdan! I mean haw can i extract audio from .rtp file, which was recorded by rtpproxy.In documentation to rtpproxy said, that extractaudio utility can do that. But how do that, i cannot find. -- С уважением, Денис.Best regards, Denis 23.12.2016, 17:49, "Bogdan-Andrei Iancu" :Hi
Ok, thank you. -- С уважением, Денис.Best regards, Denis 23.12.2016, 15:56, "Răzvan Crainea" :Hi, Denis!No, topology_hiding is not meant to change the From and To domains. If you want to change them, you have to do it explicitely in the script using the uac_replace_from/to() functi
Hello! I wander is there any reason to use uac_replace_from function with top_hiding? Or this will not work?Because top_hiding doesn`t change "From domain" field. -- С уважением, Денис.Best regards, Denis
___
Users mailing
Hello! I want to ask about extractaudio. Is there any manual for it? How can i use it?Has anybody operation experience of this soft? Thank you. -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensips.org
http
I understand, thank you. -- С уважением, Денис.Best regards, Denis 23.12.2016, 13:13, "Răzvan Crainea" :Hi, Denis!It's not OpenSIPS making the core, it's the Operating System. And the answer is "yes", if OpenSIPS crashes again, the "old core" will
One question. If in the destination directory of the core file will be located another "core" file, what will be? Would "old core" file be replaced by a new one, or Opensips makes another core file with a fresh data? Thank you. -- С уважением, Денис.Best regards, Denis
found only core file at 29 Nov. Thank you for any help. -- С уважением, Денис.Best regards, Denis
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hello http://www.opensips.org/Documentation/Script-CoreVar-2-23.91 -- С уважением, Денис.Best regards, Denis 22.12.2016, 10:28, "Kirill Galinurov" :Hi All. I need to store some additional info about user from custom sip header in Register request. How i can do it? Can i get this
Hello, Razvan! 2.2.alpha.20160822 -- С уважением, Денис.Best regards, Denis 21.12.2016, 11:58, "Răzvan Crainea" :Hi, Denis!What version of rtpproxy are you using? There might be an incompatibility issue here.Best regards,Răzvan Crainea
OpenSIPS Solutions
www.opensips-solutions.comOn
Hello, Razvan! 2.2.alpha.20160822 -- С уважением, Денис.Best regards, Denis 21.12.2016, 11:58, "Răzvan Crainea" :Hi, Denis!What version of rtpproxy are you using? There might be an incompatibility issue here.Best regards,Răzvan Crainea
OpenSIPS Solutions
www.opensips-solutions.comOn
of rtp packet works fine but when i emulated stop transfer of rtp i see in log such string:ERR::rtpp_command_ul_handle: invalid socket name :2229 What the problem is? Thank you for any help. -- С уважением, Денис.Best regards, Denis
___
Users mailing
Just one additional question.Is there any documentation about extractaudio utility?I cannot find any README file about it in the package and http://www.rtpproxy.org/post/v2release/ just mention about it. -- С уважением, Денис.Best regards, Denis 20.12.2016, 11:15, "Răzvan Crainea"
1 - 100 of 260 matches
Mail list logo