Re: [USRP-users] USRP sample rate and bandwidth

iltering works better with even decimation factors. On the 2954, the RF bandwidth is fixed at 80 MHz and the A/D rate is fixed at 100 MS/s. You can also choose decimation via DDC if you want. Rob On Wed, Jan 27, 2021 at 6:02 AM Koyel Das (Vehere) via USRP-users mailto:usrp-users@lists.ettus.com>

Re: [USRP-users] USRP sample rate and bandwidth

l. From: USRP-users on behalf of Marcus D. Leech via USRP-users Sent: Wednesday, January 13, 2021 8:15 PM To: usrp-users@lists.ettus.com Subject: Re: [USRP-users] USRP sample rate and bandwidth On 01/13/2021 01:08 AM, Koyel Das (Vehere) via USRP-users wrote: Hi,

Re: [USRP-users] USRP sample rate and bandwidth

virus transmitted by this email. From: USRP-users on behalf of Marcus D. Leech via USRP-users Sent: Wednesday, January 13, 2021 8:15 PM To: usrp-users@lists.ettus.com Subject: Re: [USRP-users] USRP sample rate and bandwidth On 01/13/2021 01:08 AM, Koyel Das (Vehere) via USRP-u

[USRP-users] USRP sample rate and bandwidth

Hi, The USRP sample rate and bandwidth are two different parameters in gnuradio so if I want 20 MHz bandwidth and 100 MSps sample rate then will setting bandwidth = 20 MHz and sample rate = 100 MHz serve my purpose? Normally sample rate (100 MHz in this case) is the bandwidth unless filter is

Re: [USRP-users] 100 MSps in usrp 2955

Ok thanks Marcus and Martin for the information. Regards, Koyel Get Outlook for iOS From: Marcus D. Leech Sent: Wednesday, September 16, 2020 7:34:21 PM To: Koyel Das (Vehere) Cc: Martin Braun ; usrp-users@lists.ettus.com Subject: Re:

[USRP-users] 100 MSps in usrp 2955

Hi, When we set sample rate at 100 MSps in usrp 2955, is the actual sample rate 100 MSps only or 128 MSps? Regards, Koyel Get Outlook for iOS ___ USRP-users mailing list USRP-users@lists.ettus.com

Re: [USRP-users] USRP sensitivity

-users on behalf of Marcus D. Leech via USRP-users Sent: Saturday, September 5, 2020 11:33:30 PM To: usrp-users@lists.ettus.com Subject: Re: [USRP-users] USRP sensitivity On 09/05/2020 10:57 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, NI told me magnitude of IQ samples received in usrp is the v

Re: [USRP-users] USRP sensitivity

One info this is usrp 2955 From: USRP-users on behalf of Koyel Das (Vehere) via USRP-users Sent: Saturday, September 5, 2020 8:28 PM To: 'USRP-users@lists.ettus.com' Cc: Naveen Jaiswal (Vehere) Subject: [USRP-users] USRP sensitivity Hi, NI told me magnitude of IQ samples received in usrp

[USRP-users] USRP sensitivity

Hi, NI told me magnitude of IQ samples received in usrp is the voltage in volts. Info: Office wifi 10 m distant USRP 70 dB (power) gain gives 10^-3 (volts? ie magnitude of IQ samples) Assume wifi transmits +20 dBm, isotropic radiator, isotropic receiving antenna Voltage expected at receiving

Re: [USRP-users] Incorrect data from usrp 2955

.ms/o0ukef> ____________________ From: USRP-users <mailto:usrp-users-boun...@lists.ettus.com> on behalf of Koyel Das (Vehere) via USRP-users <mailto:usrp-users@lists.ettus.com> Sent: Monday, August 17, 2020 10:07:05 AM To: Marcus D. Leech <mailto:patchvonbr...@gmail.c

Re: [USRP-users] Incorrect data from usrp 2955

<mailto:usrp-users@lists.ettus.com> Sent: Sunday, August 16, 2020 12:25:37 AM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> <mailto:usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Incorrect data from usrp 2955 On 08/15/2020 01:16 PM, Koyel Das (Veh

Re: [USRP-users] Incorrect data from usrp 2955

<mailto:usrp-users-boun...@lists.ettus.com> on behalf of Marcus D. Leech via USRP-users <mailto:usrp-users@lists.ettus.com> Sent: Sunday, August 16, 2020 12:25:37 AM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> <mailto:usrp-users@lists.ettus.com> Subject: Re:

Re: [USRP-users] Incorrect data from usrp 2955

I am using internal reference and I have not checked individual channel yet Get Outlook for iOS<https://aka.ms/o0ukef> From: USRP-users on behalf of Koyel Das (Vehere) via USRP-users Sent: Sunday, August 16, 2020 10:45:56 PM To: Marcus D. Leech ; usrp

Re: [USRP-users] Incorrect data from usrp 2955

tus.com> on behalf of Marcus D. Leech via USRP-users <mailto:usrp-users@lists.ettus.com> Sent: Sunday, August 16, 2020 12:25:37 AM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> <mailto:usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Incorrect data from usrp 2955

Re: [USRP-users] Incorrect data from usrp 2955

phase differences across frequency and channels and the values are stored in one vector in the code that you can see Get Outlook for iOS<https://aka.ms/o0ukef> From: USRP-users on behalf of Koyel Das (Vehere) via USRP-users Sent: Sunday, August 16, 2020

Re: [USRP-users] Incorrect data from usrp 2955

rs@lists.ettus.com> <mailto:usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Incorrect data from usrp 2955 On 08/15/2020 01:16 PM, Koyel Das (Vehere) via USRP-users wrote: Hi, We are using USRP 2955. Something has gone wrong. Before we were getting constant phase differ

Re: [USRP-users] Incorrect data from usrp 2955

sers@lists.ettus.com> Subject: Re: [USRP-users] Incorrect data from usrp 2955 On 08/15/2020 01:16 PM, Koyel Das (Vehere) via USRP-users wrote: Hi, We are using USRP 2955. Something has gone wrong. Before we were getting constant phase difference across channels for limited bandwidth and wit

Re: [USRP-users] Incorrect data from usrp 2955

for iOS<https://aka.ms/o0ukef> From: USRP-users on behalf of Marcus D. Leech via USRP-users Sent: Sunday, August 16, 2020 12:25:37 AM To: usrp-users@lists.ettus.com Subject: Re: [USRP-users] Incorrect data from usrp 2955 On 08/15/2020 01:16 PM, Koyel Das (

[USRP-users] LO sharing

Hi, What software commands are needed for LO sharing in usrp 2955 to make all channels phase aligned? At hardware level I can see the crisscross connections inside the box in the following link figure 2: https://kb.ettus.com/Direction_Finding_with_the_USRP™_X-Series_and_TwinRX™ but what on

Re: [USRP-users] Using PCIe

nstead. --Neel Pandeya On Tue, 4 Aug 2020 at 04:30, Koyel Das (Vehere) via USRP-users mailto:usrp-users@lists.ettus.com>> wrote: Hi, Do we need to install driver for using PCIe with USRP 2955? If so which link to follow for all installations to be able to use PCIe. Regards, Koyel Get Out

[USRP-users] Using PCIe

Hi, Do we need to install driver for using PCIe with USRP 2955? If so which link to follow for all installations to be able to use PCIe. Regards, Koyel Get Outlook for iOS ___ USRP-users mailing list USRP-users@lists.ettus.com

Re: [USRP-users] Automatically stop executing grc after acquiring required number of samples

u need to capture Hope this helps ! Regards, Mohamed Yaaseen On Tue, 4 Aug 2020 at 10:38, Koyel Das (Vehere) via USRP-users mailto:usrp-users@lists.ettus.com>> wrote: Hi, Can grc be made to run for a predefined fixed amount of time and number of samples and made to stop automatically aft

[USRP-users] Automatically stop executing grc after acquiring required number of samples

Hi, Can grc be made to run for a predefined fixed amount of time and number of samples and made to stop automatically after acquiring this many number of samples from usrp? If so what parameters need to be set in usrp source block and others if any to serve the purpose? Regards, Koyel Get

Re: [USRP-users] Maximum phase offset in usrp channels

-users] Maximum phase offset in usrp channels On 07/27/2020 06:26 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, Normally usrp is phase coherent that is instrumental phase offset between two channels is constant in any one run of the application. I want to know if this phase offset can be any valu

[USRP-users] Maximum phase offset in usrp channels

Hi, Normally usrp is phase coherent that is instrumental phase offset between two channels is constant in any one run of the application. I want to know if this phase offset can be any value from -pi to pi or can be more than that? Regards, Koyel Get Outlook for iOS

Re: [USRP-users] Data rate using usrp and grc

complex as then > the usrp source block is not compatible with file sink which doesn’t > have option for 16 bit complex > > Nothing in GNU Radio cares about the content of the data bytes you're > pushing around: simply set your file sink to e.g. int, or float, or to > short with vec

Re: [USRP-users] Data rate using usrp and grc

ontent of the data bytes you're > pushing around: simply set your file sink to e.g. int, or float, or to > short with vector length 2, or to byte with vector length 4: Doesn't > matter, as long as the item size ends up being 32 bits. > > Best regards, > > Marcus > >

Re: [USRP-users] Data rate using usrp and grc

o byte with vector length 4: Doesn't matter, as long as the item size ends up being 32 bits. Best regards, Marcus On 25.07.20 09:43, Koyel Das (Vehere) via USRP-users wrote: > Hi, > > I want to capture data from usrp 2955 using USRP Source block of grc and > write to file using file sink b

[USRP-users] Data rate using usrp and grc

Hi, I want to capture data from usrp 2955 using USRP Source block of grc and write to file using file sink block of grc. Will there be packet drops if USRP source is set at 32 bit complex float in grc when receiving at 100 MSPS each from two channels? That makes 2*100e6*64 (32 bit I and 32 bit

Re: [USRP-users] Error in grc but running on terminal

uly 24, 2020 10:59:02 PM To: usrp-users@lists.ettus.com Subject: Re: [USRP-users] Error in grc but running on terminal On 07/24/2020 01:22 PM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am using USRP 2955. I am using the code in c++ given in github to acquire data. I don’t know data is c

[USRP-users] Error in grc but running on terminal

Hi, I am using USRP 2955. I am using the code in c++ given in github to acquire data. I don’t know data is correct or not but the green light below one antenna is glowing. However, when I run a grc flowgraph I get fpga image incompatibility error. Why this different behaviour while running

Re: [USRP-users] 4 channel capture using grc and pcie

will give you a working GNU Radio, and a matching UHD. > > (Don't follow any other guides on installing UHD – you've already got > the recommended version, then, and installing anything else is just > asking for trouble) > > Best regards, > Marcus > > On 24.07.20 10:21, K

Re: [USRP-users] 4 channel capture using grc and pcie

which `sudo apt install gnuradio` will give you a working GNU Radio, and a matching UHD. (Don't follow any other guides on installing UHD – you've already got the recommended version, then, and installing anything else is just asking for trouble) Best regards, Marcus On 24.07.20 10:21, Koyel Das (

[USRP-users] Using GNU radio

Can 6 gbps from usrp be written to a file using GNU Radio Companion with usrp source to file sink in a RAM disk? Get Outlook for iOS ___ USRP-users mailing list USRP-users@lists.ettus.com

[USRP-users] 4 channel capture using grc and pcie

Hi, Is it possible to receive data from 4 channels simultaneously of usrp 2955 using PCIe ? Which version of Linux and grc should be installed for that? Regards, Koyel Get Outlook for iOS ___ USRP-users mailing list

Re: [USRP-users] USRP E313

SRP X310 or NI USRP 294x or 295x using a PCIe or 2x10 gigE link to a host PC. On Mon, Jul 15, 2019 at 7:44 AM Marcus D Leech via USRP-users mailto:usrp-users@lists.ettus.com>> wrote: Not really possible except for a test mode called network mode that offers very low bandwidth Sent fr

Re: [USRP-users] USRP E313

Jul 15, 2019 at 7:44 AM Marcus D Leech via USRP-users mailto:usrp-users@lists.ettus.com>> wrote: Not really possible except for a test mode called network mode that offers very low bandwidth Sent from my iPhone On Jul 15, 2019, at 4:27 AM, Koyel Das (Vehere) via USRP-users mailto:us

Re: [USRP-users] USRP E313

2019, at 4:27 AM, Koyel Das (Vehere) via USRP-users mailto:usrp-users@lists.ettus.com>> wrote: Hi, The following USRP https://www.ettus.com/all-products/usrp-e313/ [https://www.ettus.com/wp-content/uploads/2019/01/E313_Front-Large_2-1200x630.jpg]<https://www.ettus.com/all-product

[USRP-users] USRP E313

Hi, The following USRP https://www.ettus.com/all-products/usrp-e313/ [https://www.ettus.com/wp-content/uploads/2019/01/E313_Front-Large_2-1200x630.jpg] USRP E313 | Ettus Research, a National Instruments Brand | The leader in Software Defined

Re: [USRP-users] USRP gain refers to which amplifier

ay, June 20, 2019 7:38:41 PM To: usrp-users@lists.ettus.com Subject: Re: [USRP-users] USRP gain refers to which amplifier On 06/20/2019 06:48 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, When we set the gain of USRP does that mean we are increasing the gain of amplifier just after the

[USRP-users] USRP gain refers to which amplifier

Hi, When we set the gain of USRP does that mean we are increasing the gain of amplifier just after the antenna or the gain is spread across various amplifiers in the chain? Regards, Koyel Das Senior – Product Engineer Vehere | Proactive Communications Intelligence & Cyber Defence M:

Re: [USRP-users] problem with fftw_plan_dft_2d

From: USRP-users on behalf of Marcus D. Leech via USRP-users Sent: Friday, May 17, 2019 9:27:34 AM To: usrp-users@lists.ettus.com Subject: Re: [USRP-users] problem with fftw_plan_dft_2d On 05/16/2019 11:52 PM, Koyel Das (Vehere) via USRP-users wrote: Hi, Following is a snapshot of my code

Re: [USRP-users] problem with fftw_plan_dft_2d

on behalf of Marcus D. Leech via USRP-users Sent: Friday, May 17, 2019 9:27:34 AM To: usrp-users@lists.ettus.com Subject: Re: [USRP-users] problem with fftw_plan_dft_2d On 05/16/2019 11:52 PM, Koyel Das (Vehere) via USRP-users wrote: Hi, Following is a snapshot of my code using fft

[USRP-users] problem with fftw_plan_dft_2d

Hi, Following is a snapshot of my code using fftw_plan_dft_2d. I am getting all zeros in the imaginary part of fft (in the printf command of the following code:last line). The real part is correct.Could you please tell where am I going wrong? fftw_complex

Re: [USRP-users] vert 2450 quarter wave monopole?

oyel Das (Vehere) Subject: Re: vert 2450 quarter wave monopole? According to this, it is a dipole: https://kb.ettus.com/images/9/9e/ettus_research_vert2450_datasheet.pdf From: USRP-users on behalf of Koyel Das (Vehere) via USRP-users Sent: Tuesday, May 14, 2019

[USRP-users] vert 2450 quarter wave monopole?

Hi, Can someone tell me if vert 2450 is quarter wave monopole antenna? Or what is it? Regards, Koyel Das Senior – Product Engineer Vehere | Proactive Communications Intelligence & Cyber Defence M: +919051132173 | T: +91 33 40545454 | F: +91 33 40545455 | W:

Re: [USRP-users] timeout error

Please reply the below email. Regards, Koyel Das Senior – Product Engineer Vehere | Proactive Communications Intelligence & Cyber Defence M: +919051132173 | T: +91 33 40545454 | F: +91 33 40545455 | W: www.vehere.com

[USRP-users] application aborted

Hi, I am using rx_multisamples.cpp to receive data from USRP. Whenever I am getting an error instead of giving error my application is getting aborted. Is there a way to get error message rather than the application being aborted? Like if we don't have the LAN connection with the USRP, the

[USRP-users] timeout error

Hi, For receiving data using usrp, sweeping a frequency range, following the code rx_multisamples.cpp, I am setting the frequency then doing START_CONTINUOUS; after receiving I am doing STOP_CONTINUOUS. After the code runs for sometime I am getting ERROR_CODE_TIMEOUT and the application

[USRP-users] pause streaming

Hi, Is there a way to pause streaming data from USRP 2955R and resume back? What is the code/ command for that? Is there an example available? Regards, Koyel Das Senior – Product Engineer Vehere | Proactive Communications Intelligence & Cyber Defence M: +919051132173 | T: +91 33 40545454 |

[USRP-users] changing frequency on the fly

Hi, I am streaming data from USRP 2955R from 4 channels. Basic code is rx_multisamples.cpp . 1.I want to scan frequencies that is change centre frequency on the fly. So do I have to discard some packets after changing frequencies so that data from one frequency doesn't enter another

Re: [USRP-users] not getting phase coherence between channels

Hi Marcus, Thanks its clear now. Regards, Koyel Das Senior – Product Engineer Vehere | Proactive Communications Intelligence & Cyber Defence M: +919051132173 | T: +91 33 40545454 | F: +91 33 40545455 | W: www.vehere.com

Re: [USRP-users] not getting phase coherence between channels

d check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. From: USRP-users on behalf of Marcus D. Leech via USRP-users Sent: Tuesday, April 2, 2019 7

[USRP-users] not getting phase coherence between channels

Hi, I am using the given code for data receiving from two channels. I need to do LO sharing for phase coherent application, which is done as shown in the code and externally as shown in the image attached but I am not getting constant phase difference. We have connected one antenna to input

Re: [USRP-users] link led colour

e validness of data. It's highly likely this is normal. What USRP are you using? Best regards, Marcus On Wed, 2019-03-06 at 05:05 +0000, Koyel Das (Vehere) via USRP-users wrote: > Hi, > > When I am receiving data using ethernet my link LED is orange most of > the times and blinking to red f

Re: [USRP-users] different phase difference using splitter on each run

Okay so is it enough to use timed tuning to get constant phase difference each time? Koyel Das Senior – Product Engineer Vehere | Proactive Communications Intelligence & Cyber Defence M: +919051132173 | T: +91 33 40545454 | F: +91 33 40545455 | W: www.vehere.com

[USRP-users] link led colour

Hi, When I am receiving data using ethernet my link LED is orange most of the times and blinking to red for momentarily, which is not so noticeable. Am I receiving wrong data? It is not turning green. Regards, Koyel Koyel Das Senior – Product Engineer Vehere | Proactive Communications

Re: [USRP-users] different phase difference using splitter on each run

Hi, By tuning commands I understand you mean command of synchronization for frequency tuning? But then in which other places I have to use the timed commands like in gain, sample rate etc also do I have to use timed commands? If so what are those commands? I am not getting a clear example of

Re: [USRP-users] different phase difference using splitter on each run

So basically I have to insert the following line usrp->set_command_time(cmd_time); before the code where I need timed operations and then at the end of the code I insert usrp->clear_command_time(); ?? Koyel Das Senior - Product Engineer Vehere | Proactive Communications Intelligence &

Re: [USRP-users] different phase difference using splitter on each run

D. Leech via USRP-users <mailto:usrp-users@lists.ettus.com> Sent: Tuesday, March 5, 2019 7:03:42 PM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> Subject: Re: [USRP-users] different phase difference using splitter on each run On 03/05/2019 06:01 AM, Koyel Das (Vehe

Re: [USRP-users] different phase difference using splitter on each run

:03:42 PM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> Subject: Re: [USRP-users] different phase difference using splitter on each run On 03/05/2019 06:01 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am using USRP 2955 R and I have connected an antenna to one e

Re: [USRP-users] different phase difference using splitter on each run

s.ettus.com> Subject: Re: [USRP-users] different phase difference using splitter on each run On 03/05/2019 06:01 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am using USRP 2955 R and I have connected an antenna to one end of a two channel splitter and connected the other two ports of the

Re: [USRP-users] different phase difference using splitter on each run

/05/2019 06:01 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am using USRP 2955 R and I have connected an antenna to one end of a two channel splitter and connected the other two ports of the splitter to the two RX1 pors of USRP. I am getting different phase difference in each run of USRP

[USRP-users] different phase difference using splitter on each run

Hi, I am using USRP 2955 R and I have connected an antenna to one end of a two channel splitter and connected the other two ports of the splitter to the two RX1 pors of USRP. I am getting different phase difference in each run of USRP though in one particular run the phase difference is

Re: [USRP-users] Ubuntu kernel version

. https://wiki.ubuntu.com/Kernel/Support https://wiki.ubuntu.com/Kernel/LTSEnablementStack --Neel Pandeya On Mon, 21 Jan 2019 at 06:01, Koyel Das (Vehere) via USRP-users mailto:usrp-users@lists.ettus.com>> wrote: Hi, So do I need to install Ubuntu 18.10 to be able to stream 4 ch

Re: [USRP-users] multi_samples.cpp

Please someone reply From: USRP-users on behalf of Koyel Das (Vehere) via USRP-users Sent: Monday, January 21, 2019 4:03:22 PM To: 'USRP-users@lists.ettus.com' Subject: [USRP-users] multi_samples.cpp Hi, I am new to c++. I am going through multi_samples.cpp

[USRP-users] Ubuntu kernel version

Hi, So do I need to install Ubuntu 18.10 to be able to stream 4 channels simultaneously by using rx_multi_samples.cpp or any other? What should be the kernel version? Regards, Koyel ___ USRP-users mailing list USRP-users@lists.ettus.com

[USRP-users] multi_samples.cpp

Hi, I am new to c++. I am going through multi_samples.cpp https://github.com/EttusResearch/uhd/blob/master/host/examples/rx_multi_samples.cpp Actually I want to receive data from 1)4 channels of a single USRP 2955 R 2) 8 channels of 2 USRP 2955R I see "args" parameter and "subdev"

[USRP-users] stability of USRP 2954R/2955R

Hi, Is the phase difference between two receiving channels in USRP 2954 R or between any two channels of USRP 2955R stable? That is can I measure the phase difference using a power splitter and equal length cables and say that it will remain the same always or will it vary? Regards, Koyel

Re: [USRP-users] twinrx example

an Am 04.12.2018 um 06:28 schrieb Koyel Das (Vehere) via USRP-users: > Hi, > > > I am not finding an example to receive data for twinrx case of USRP > x300/310. > > > I am looking at the following link: > > > https://github.com/EttusResearch/uhd/tree/master/host/

[USRP-users] twinrx example

Hi, I am not finding an example to receive data for twinrx case of USRP x300/310. I am looking at the following link: https://github.com/EttusResearch/uhd/tree/master/host/examples

Re: [USRP-users] 2955 multiple receivers not working together

Hi Neel, We are using windows version, which installs gnuradio and we don't need to install anything else ourselves further. I didn't find a UHD folder. Is it possible to execute command "uhd_find_devices" in windows also? If so how? Regards, Koyel From:

Re: [USRP-users] 2955 multiple receivers not working together

To: usrp-users@lists.ettus.com Subject: Re: [USRP-users] 2955 multiple receivers not working together On 11/29/2018 02:20 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am trying to receive signals from antennas connected to two RX2 ports of USRP 2955 R. But when the frequency sink pops up

Re: [USRP-users] regarding mutual coupling between antennas

Ok thanks for the information. Regards, Koyel From: Marcus D. Leech Sent: Friday, October 5, 2018 6:49:19 PM To: Koyel Das (Vehere); 'USRP-users@lists.ettus.com' Subject: Re: regarding mutual coupling between antennas On 10/05/2018 02:04 AM, Koyel Das (Vehere)

[USRP-users] regarding mutual coupling between antennas

Hi Marcus, As you said that you do interferometry using USRP 2954 R or similar, do you connect the antennas directly to the two ports of USRP or you use cables to make them farther apart? If we don't use cables and directly connect the antennas to USRP, can there be mutual coupling between

Re: [USRP-users] Sampler clock common or not?

to use splitter to find out so need to wait. If meanwhile I can try something else then please let me know. Regards, Koyel From: USRP-users on behalf of Koyel Das (Vehere) via USRP-users Sent: Monday, September 17, 2018 9:23:33 PM To: Marcus D. Leech Cc: 'USRP

Re: [USRP-users] Sampler clock common or not?

. Regards, Koyel From: USRP-users <mailto:usrp-users-boun...@lists.ettus.com> on behalf of Koyel Das (Vehere) via USRP-users <mailto:usrp-users@lists.ettus.com> Sent: Monday, September 17, 2018 12:12:32 PM To: Marcus D. Leech; 'USRP-users@lis

Re: [USRP-users] Sampler clock common or not?

. They are not phase locked but we can provide a reference clock if we want them to run coherently. He said in 2955 R LO sharing is there so we can share single LO for 4 daughter boards. Regards, Koyel From: USRP-users on behalf of Koyel Das (Vehere) via USRP-users Sent

Re: [USRP-users] Sampler clock common or not?

5:10:23 AM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Sampler clock common or not? On 09/15/2018 01:35 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am using USRP 2954R. I have connected one antenna to RX2 of RF0 and another antenna to TX/RX of RF

Re: [USRP-users] Sampler clock common or not?

unday, September 16, 2018 5:10:23 AM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Sampler clock common or not? On 09/15/2018 01:35 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am using USRP 2954R. I have connected one antenna to RX2 of RF0

Re: [USRP-users] Fw: the steps of processing I am doing

Yeah my supervisor also suggested to use a splitter. I will do that. Thanks. Regards, Koyel From: Marcus D. Leech Sent: Sunday, September 16, 2018 9:25:48 AM To: Koyel Das (Vehere); 'USRP-users@lists.ettus.com' Subject: Re: Fw: the steps of processing I am doing

Re: [USRP-users] Sampler clock common or not?

:10:23 AM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Sampler clock common or not? On 09/15/2018 01:35 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am using USRP 2954R. I have connected one antenna to RX2 of RF0 and another antenna

[USRP-users] Fw: the steps of processing I am doing

I am forwarding the processing steps of matlab. I checked with my phd supervisor from MPIFR . He is also surprised to see the results. I also did phd in radio astronomy instrumentation. Please go through the steps of post processing once. My supervisor didn’t find anything wrong so we are

Re: [USRP-users] Sampler clock common or not?

lists.ettus.com> Subject: Re: [USRP-users] Sampler clock common or not? On 09/15/2018 01:35 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am using USRP 2954R. I have connected one antenna to RX2 of RF0 and another antenna to TX/RX of RF1. Both are used for receiving. Can someone tell me if

Re: [USRP-users] Sampler clock common or not?

, September 16, 2018 5:10:23 AM To: usrp-users@lists.ettus.com Subject: Re: [USRP-users] Sampler clock common or not? On 09/15/2018 01:35 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am using USRP 2954R. I have connected one antenna to RX2 of RF0 and another antenna to TX/RX of RF1. Both

Re: [USRP-users] Unable to receive two channels

I installed gnuradio and UHD got installed with gnuradio package. I tried to run uhd-usrp-probe in cmd but it told me to download images but I already have images in following path: C:\Program Files\GNURadio-3.7\share\uhd\images\usrp_x310_fpga_HG.lvbitx But when I tried to run uhd_usrp_probe

Re: [USRP-users] Unable to receive two channels

I am using UHD 3.11 and source of the signal is wifi. Regards, Koyel From: Marcus D. Leech Sent: Thursday, September 13, 2018 11:50:13 AM To: Koyel Das (Vehere); 'USRP-users@lists.ettus.com' Subject: Re: [USRP-users] Unable to receive two channels On

Re: [USRP-users] Unable to receive two channels

Thursday, September 13, 2018 11:14:59 AM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Unable to receive two channels On 09/13/2018 01:28 AM, Koyel Das (Vehere) via USRP-users wrote: Hi, I am using usrp 2955 R and trying to receive signals fro

[USRP-users] Unable to receive two channels

Hi, I am using usrp 2955 R and trying to receive signals from RX1 port of RF0 and RX2 port of RF1 simultaneously by configuring UHD usrp source to receive two channels. I have made number of channels to two. And set the antennas of the two as RX1 and RX2. But then no signal is being received.