Hi Annie,
Harry told me in an email that some of the people who ordered their
Standscan towards the very end of the promotion are going to receive the
version from the new production run which, as Ron pointed out, is made from
stronger cartbord that is laminated on both sides and has stronger magn
el
>> Sent: Thursday, April 04, 2013 12:50 PM
>> To: viphone@googlegroups.com
>> Subject: Standscan not holding together and other thoughts on the product,
>> was: Standscan pro - I admit defeat
>>
>> Hi Annie and Krister,
>>
>> I received my Stands
roups.com [mailto:viphone@googlegroups.com] On Behalf
Of Annie Skov Nielsen
Sent: Friday, April 05, 2013 6:12 PM
To: viphone@googlegroups.com
Subject: Re: Standscan not holding together and other thoughts on the
product, was: Standscan pro - I admit defeat
Hi all.
Ok I agree that cardboard is not the best
com] On Behalf
> Of Sieghard Weitzel
> Sent: Thursday, April 04, 2013 12:50 PM
> To: viphone@googlegroups.com
> Subject: Standscan not holding together and other thoughts on the product,
> was: Standscan pro - I admit defeat
>
> Hi Annie and Krister,
>
> I received my Standsca
: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
Of Sieghard Weitzel
Sent: Thursday, April 04, 2013 11:11 PM
To: viphone@googlegroups.com
Subject: RE: Standscan not holding together and other thoughts on the
product, was: Standscan pro - I admit defeat
Hi Keith,
I am not sure
well.
- Original Message -
From: "Sieghard Weitzel"
To:
Sent: Thursday, April 04, 2013 3:31 PM
Subject: RE: Standscan not holding together and other thoughts on the
product, was: Standscan pro - I admit defeat
Hello ron,
I am sure it could be done, but if you wanted this to
l 04, 2013 12:50 PM
To: viphone@googlegroups.com
Subject: Standscan not holding together and other thoughts on the product,
was: Standscan pro - I admit defeat
Hi Annie and Krister,
I received my Standscan yesterday and while I had the benefit of reading the
various posts regarding setting it up, I
: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
Of Sieghard Weitzel
Sent: Thursday, April 04, 2013 11:11 PM
To: viphone@googlegroups.com
Subject: RE: Standscan not holding together and other thoughts on the
product, was: Standscan pro - I admit defeat
Hi Keith,
I am not sure
As I said above, once I went through all the folds and made sure they
were creased
My Stand scan is very sturdy and is much easier to set up. I keep mine
folded and out of the way since I can set it up in less than 10
seconds.
A little rubber cement amd three pennies and I can put the iPhone in
th
I personally believe that piano hinges and plywood would make for a very
stable non-portable product. But plywood would tend to be a bit heavy and
awkward; not for many I'm sure, but I suspect a notable number of folks
would find plywood construction a bit too bulky. The idea of the piano
hin
Here are some thoughts I have:
- Substitute material should not be any plastic because the heat generated
by lighting would likely warp it.
- aluminum flashing framed by lightweight angle aluminum (maybe ź")
- mount lighting a bit off the framing to prevent overheating metal and
burning users
Folks, I am NOT typically a whiner about prices; but in the case of the
ScanStand I feel horribly ripped off. I paid $27.00 for what is essentially a
shoe box with a flashlight built into it. And not a very sturdy shoe box at
that! This is not a product I’d recommend to anybody.
Holland'
Hi Keith,
I am not sure where you are, but I would just google it. Amazon probably has
them, I definitely know that Lee Valley Tools has them which is where I buy
mine. Lee Valley Tools is a Canadian company which sells woodworker
supplies, tools, all sorts of specialty hardware and so on. Their w
@googlegroups.com
Subject: Standscan not holding together and other thoughts on the product, was:
Standscan pro - I admit defeat
Hi Annie and Krister,
I received my Standscan yesterday and while I had the benefit of reading the
various posts regarding setting it up, I found the detailed descriptions
very
AM
To: viphone@googlegroups.com
Subject: RE: Standscan not holding together and other thoughts on the
product, was: Standscan pro - I admit defeat
Hi Sieghard,
I thought it may not be a bad idea to use these round or square pieces of
Velcro on the two places that seem to be the weakest. In my case, I
Hi Chuck and All,
I am not so sure that I would shake the StandScan. I beliele that the wire for
the cable that connects to the lights is fragil. I need to observe this some
more, but I think I have a loose connection. With the amount of light
perception, I noticed that the light wasn't on. I
My Stand Scan Pro was having the same problem, so I ran my thumb nail
along all the folds, to insure that they were creased, and would lie
flat.
Hindsight being 20 20 I think using the edge of a butter knife would
be less stressful on my thumb.
Now my Stand scan pro sets up quickly, and feels sol
ke it
foldable?
Ron & Danvers
-Original Message-
From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
Of Sieghard Weitzel
Sent: Thursday, April 04, 2013 12:50 PM
To: viphone@googlegroups.com
Subject: Standscan not holding together and other thoughts on the pro
s.com
Subject: Re: Standscan not holding together and other thoughts on the
product, was: Standscan pro - I admit defeat
Hi Sieghard.
It would be nice, if the box could be built in another material, but what
kind of material would be as lightwaight and easy to carry around. It could
be done in some so
Hi Sieghard.
It would be nice, if the box could be built in another material, but what kind
of material would be as lightwaight and easy to carry around. It could be done
in some sort of plastic, but when the producing will be more difficult.
Best regards Annie.
On Apr 4, 2013, at 6:50 PM, Sieg
strips on the bottom of the box.
It now sits niceand flat..
Crystal
From: Sieghard Weitzel
Sent: Thursday, April 04, 2013 11:50 AM
To: viphone@googlegroups.com
Subject: Standscan not holding together and other thoughts on the product, was:
Standscan pro - I admit defeat
Hi Annie and Krister
Hi Annie and Krister,
I received my Standscan yesterday and while I had the benefit of reading the
various posts regarding setting it up, I found the detailed descriptions
very difficult to understand without the Standscan in front of you. Anyhow,
it took me maybe 15 minutes to figure it out, afte
22 matches
Mail list logo