Re: [weewx-user] ModuleNotFoundError: No module named 'six.moves'

Hi Tom, Thanks for the tip, I've tried it out but it fails to build wheel for Pillow, it looks like a really neat approach but I don't see the point of trying to troubleshoot why it fails. But it'd be appreciated if you happen to have a copy of genplot.py fix from here

Re: [weewx-user] ModuleNotFoundError: No module named 'six.moves'

dpkg (not apt) installation of weewx and any >> corequisites to get current. >> >> You're going to want to get current regardless eventually. I still have >> to think a pip installation of weewx should work >> >> On Monday, September 2, 2024 at 11:59:30 

Re: [weewx-user] ModuleNotFoundError: No module named 'six.moves'

Hello *Rich*, Apologies for not using the search, that was indeed very helpful and did the job. Much obliged! Hi *Vince*, *– Why again aren’t you using v5? * I'm actually running Debian Trixie ppc64 on and old old Power Mac :) So whenever I try to install v5 it asks for Python3-ephem, however

Re: [weewx-user] ModuleNotFoundError: No module named 'six.moves'

Hi Tom! *1.* I'm trying to install an older version because anything 5+ requires python3-ephem of which the latest version for my distribution is 3.7.6.0-3 which in itself requires python3 under 3.6 *2.* I'm only showing the relevant error, otherwise the full process goes like this: sudo apt-g

[weewx-user] ModuleNotFoundError: No module named 'six.moves'

Hello, So after failing with WeeWX on Mint I'm trying to install it on Debian, but I get an error about missing module. Unpacking weewx (4.10.2-1) ... Setting up weewx (4.10.2-1) ... Traceback (most recent call last): File "/usr/share/wee

[weewx-user] Re: "ERROR weewx.drivers.acurite"

and when I unplug and plug the USB cable: Aug 11 01:26:38 weewxd[2883]: DEBUG weewx.drivers.acurite: Found station at bus= device= Aug 11 01:26:38 weewxd[2883]: DEBUG weewx.drivers.acurite: next read in 18 seconds Aug 11 01:26:53 kernel: usb 2-3.4: USB disconnect, device number 6 Aug 11 01:26:56

[weewx-user] Re: "ERROR weewx.drivers.acurite"

Aug 11 01:26:38 weewxd[2883]: DEBUG weewx.drivers.acurite: Found station at bus= device= Aug 11 01:26:38 weewxd[2883]: DEBUG weewx.drivers.acurite: next read in 18 seconds Aug 11 01:26:53 kernel: usb 2-3.4: USB disconnect, device number 6 Aug 11 01:26:56 weewxd[2883]: CRITICAL weewx.drivers.acuri

[weewx-user] Re: "ERROR weewx.drivers.acurite"

Quick update, after another round of restarts now only the 'DEBUG' message appears and the 'ERROR' is gone: Aug 11 01:23:02 weewxd[2883]: INFO weewx.engine: Loading station type AcuRite (weewx.drivers.acurite) Aug 11 01:23:02 weewxd[2883]: INFO weewx.drivers.acurite: driver version is 0.4 Aug 1

[weewx-user] "ERROR weewx.drivers.acurite"

Hello, I've just installed WeeWX 5.1 using the apt method as described for Debian on a Linux Mint laptop. It appears weewx is unable to get the data from the console, I've tried swapping the cables and changing the USB setting to 3 and 4, restarting weewx, the OS, and the console. Model: Acu

Re: [weewx-user] Re: Why the rain 'spikes'?

Hello Bob, Many thanks for this. All the best, Ivo -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discuss

Re: [weewx-user] Re: Why the rain 'spikes'?

es 12 second updates), but recording at the same interval that weewx is > putting data into the database seems a good compromise. > > Hope this helps > > Bob > > On Wednesday 24 January 2024 at 08:35:25 UTC Ξ wrote: > >> One more question if I may: I tried searching bu

Re: [weewx-user] Re: Why the rain 'spikes'?

One more question if I may: I tried searching but I couldn't find explanation why the loop data doesn't report the battery status?! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it,

Re: [weewx-user] Re: Why the rain 'spikes'?

Thanks Bob, I'll follow your advice from now on to regularly clear the console data buffer. btw, any particular reason why you recommended (in another thread) the 5 minute setting of the buffer as opposed to any other? -- You received this message because you are subscribed to the Google Group

Re: [weewx-user] Re: Why the rain 'spikes'?

Hi Bob, You've already explained to me about the buffer in another thread, but I haven't got around to to empty it or change the setting, I'll go there tomorrow and do just that! Thanks again! When looking at the data for 15-Dec-23 specifically, it does appear that 14 is the sum of all the pre

Re: [weewx-user] Re: Why the rain 'spikes'?

ues after a > power outage. > > On Thu, Jan 18, 2024 at 5:09 AM Ξ wrote: > >> I'd like to post some more details about December >> >> MONTHLY CLIMATOLOGICAL SUMMARY for Dec 2023 >> NAME: Dolni Okol >>

Re: [weewx-user] Re: Why the rain 'spikes'?

ations will not use the metric >system in the db > > it is unusual. > > > > Ξ schrieb am Donnerstag, 18. Januar 2024 um 10:09:05 UTC+1: > >> Tom, >> >> It's much appreciated you've spent the time to look into this, if there's >>

Re: [weewx-user] Re: Why the rain 'spikes'?

Tom, It's much appreciated you've spent the time to look into this, if there's nothing wrong with WeeWX - there's nothing wrong with WeeWX :) I'll ask Bob if he can have a gander at this. I have to admit though I find it a bit stranger using metric would be considered an unusual circumstances, i

Re: [weewx-user] Re: Why the rain 'spikes'?

u using in your database? This is the setting for > option "*target_unit*". > > -tk > > On Sun, Jan 14, 2024 at 10:56 AM Ξ wrote: > >> and the NOAA reports show it too: >> >>MONTHLY CLIMATOLOGICAL SUMMARY for Sep 2

Re: [weewx-user] Re: Why the rain 'spikes'?

and the NOAA reports show it too: MONTHLY CLIMATOLOGICAL SUMMARY for Sep 2023 NAME: Dolni Okol ELEV: 1010 metersLAT: 42-29.40 NLONG: 023-29.70 E TEMPERATURE (C), RAIN (mm), WIND SPEED (m/s)

Re: [weewx-user] Re: Why the rain 'spikes'?

Many thanks for the pointers: *sqlite> select dateTime, date(dateTime,'unixepoch','localtime'), sum(rain) from archive where date(dateTime,'unixepoch','localtime')=='2023-09-16';1694811600|2023-09-16|59.2sqlite> select dateTime, date(dateTime,'unixepoch','localtime') as dt, sum from arch

Re: [weewx-user] Re: Why the rain 'spikes'?

x27;localtime'), sum from archive_day_rain where dateTime > 1694822400 and dateTime <= 1694908800; 1694898000|2023-09-17 00:00:00|0.8 On Sunday, January 7, 2024 at 11:13:32 PM UTC+2 Tom Keffer wrote: > Yes, I know you posted those, but we need to see the values in the daily > summary for t

Re: [weewx-user] Re: Why the rain 'spikes'?

dateTime <= 1694908800; > select dateTime, datetime(dateTime, 'unixepoch', 'localtime'), sum from > archive_day_rain where dateTime > 1694822400 and dateTime <= 1694908800; > > -tk > > On Sat, Jan 6, 2024 at 6:32 PM Ξ wrote: > >> Hello Tom, &

[weewx-user] Re: Error: invalid read_period in get_records

Hi Mario, I have no idea what's going on :) However it appears your weather station is a rebranded Fine Offset one which means you're likely using the fousb driver, if that's indeed the case you can look up these topics (I found them by searching for the error message you've posted): https://gr

Re: [weewx-user] Re: Why the rain 'spikes'?

Hello Tom, I've posted above a link to the exact date I was comparing: https://www.wunderground.com/dashboard/pws/I5302/table/2023-09-16/2023-09-16/daily You can see there on September 16, 2023 the total precipitation is 9.14 mm whereas WeeWx is showing "Today's Rain: 59,2mm" Here's also the

Re: [weewx-user] No handlers could be found for logger "user.ws6in1".

Hello Bob, Huge thank you for taking the time to get back to me on this even though I'm 'a bit' late to check back, but it's really appreciated! Ivo -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiv

Re: [weewx-user] Re: Why the rain 'spikes'?

If the wrong data is only in the db but not reported to the likes of PWS Weather, Wunderground etc is it possible to narrow it down to the station or the driver?! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and

Re: [weewx-user] No handlers could be found for logger "user.ws6in1".

also, oops, I've replied to the above but by hitting 'reply to author' so I guess now only Bob sees it :/ -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-us

Re: [weewx-user] No handlers could be found for logger "user.ws6in1".

> 2. Since the station has a configurable data log, if communication between it and weewx/ws6in1 is interrupted for a significant time period, let's say 5 days, does weewx/ws6in1 catch up/fetch the missing data? To answer my own question weewx/ws6in1 doesn't seem to do a backfill: today the ele

Re: [weewx-user] No handlers could be found for logger "user.ws6in1".

Hi Tom, Many thanks for the explanation, I'll keep the set up as long as it works since support for Arch for armv6 has been discontinued and I'll need either new hardware or to change to an OS that still has armv6 support, in either case that would require setting up everything anew and I just

[weewx-user] No handlers could be found for logger "user.ws6in1".

Hello, A year ago I installed WS 6in1 for Bresser 5-in1 (thread for reference https://groups.google.com/u/1/g/weewx-user/c/VPrfgr5uZq4/m/pNE9U0RRAQAJ), which was running without problems until June 13 when it stopped sending reports. When I went at the site I noticed the outside batteries had

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

the UV value. > > Hope this helps > > Bob > > On Monday, 20 June 2022 at 13:47:40 UTC+1 Ξ wrote: > >> btw, Bob, since my station is 5-in-1 i.e. without the UV measuring it >> shows value '0' instead of 'none': >> >> Jun 20 14:18:3

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

acing the index template with an original one. I don't have the brain capacity to figure out what's wrong with the FTP, however it really doesn't make sense why these parts should be affected from the things I've done, oh well. On Sunday, June 19, 2022 at 9:16:56 PM UTC+3 Ξ

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

btw, Bob, since my station is 5-in-1 i.e. without the UV measuring it shows value '0' instead of 'none': Jun 20 14:18:33 alarmpi weewxd[205]: LOOP: 2022-06-20 14:17:58 EEST (1655723878) altimeter: 1016.65803451, appTemp: 24.8153446101, barometer: 1012.0, cloudbase: 3242.70924389, dateTime: 16

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

Originally I was using a modified skin and I had kept the initial standard skin saved as index.html.tmpl-orig, I replaced with it index.html.tmpl and it started generating reports without a problem, now I'm going to extract an 'original' FTP skin and also try to replace that one, I suspect WS6in

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

I coped the entire /home/weewx/ directory before installing v4.8.0, then I reverted the original of v3.7.1 so the v4 install shouldn't have messed with the old version -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this grou

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

or rather Python3 can't find it, since it works with Python2 and weewx v3.7.1, either way I've decided to try that make work (because weewx 4.8 doesn't work with two of the extensions for whatever reason) and I solved the crcmod issue, but when I try to run it it fails because 'No module named

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

Not so good: Jun 14 17:45:21 alarmpi weewxd[1473]: weewx[1473] DEBUG user.ws6in1: genLoopPackets: yielding Jun 14 17:45:21 alarmpi weewxd[1473]: weewx[1473] DEBUG weewx.reportengine: Found configuration file /home/weewx/skins/Standard/skin.conf for report 'StandardReport' Jun 14 17:45:21 alarmp

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

I've commented out both cummulus real time and WeatherCloud in weeex.conf and started it, now it's back filling old data and it outputs in the log this stuff too, we'll see the end result soon: [...] Jun 14 17:36:34 alarmpi weewxd[1473]: weewx[1473] INFO weewx.manager: Added record 2022-06-08 2

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

Oops, it doesn't like the weather cloud module either: Jun 14 17:32:11 alarmpi weewxd[1465]: weewx[1465] DEBUG weewx.engine: Finished loading service weewx.restx.StdAWEKAS Jun 14 17:32:11 alarmpi weewxd[1465]: weewx[1465] DEBUG weewx.engine: Loading service user.wcloud.WeatherCloud Jun 14 17:32:1

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

just for reference the updated sys.path output [root@alarmpi ~]# python -m site sys.path = [ '/root', '/usr/lib/python38.zip', '/usr/lib/python3.8', '/usr/lib/python3.8/lib-dynload', '/usr/lib/python3.8/site-packages', '/usr/lib/python3.10/site-packages', ] USER_BASE: '/ro

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

Hi again Bob, I'm Ivo btw :) OK, I had to learn a thing or two about Pytho: the crc module *was* installed, but in /usr/lib/python3.10/site-packages, all other packages were in /usr/lib/python3.8/ so it was looking there for it: [root@alarmpi ~]# python -m site sys.path = [ '/root', '/u

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

is there a way to test crcmod some other way to confirm it's running and installed properly? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr..

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

so I've tried running --reconfigure after installing 4.8.0 but I still get this message: Indicate the preferred units for display: ['us', 'metric', 'metricwx'] unit system [us]: metricwx Installed drivers include: 0) ? (user.ws6in1) No module named 'crcmod' 1) AcuRi

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

Heya Bob, I wanted to avoid new installation but I guess I have not many options here. I did install python-crcmod but I saw it's in the python3 directory and I've configured during install weewx to use python2. As for Arch Linux, they dropped in March support for armv6 but luckily there's stil

[weewx-user] Re: Installing WS 6in1 for Bresser 5-in1

It seems I've installed WeeWx to use Python2.7 and python-crcmod is installed for Python3, is there a way to change to Python3 or do I need to re-install again? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and s

[weewx-user] Installing WS 6in1 for Bresser 5-in1

Hello, Can someone please point me to how do I make ws6in1 recognise crcmod which I have installed? Here's what happens when I run reconfig: Installed drivers include: 0) ? (user.ws6in1) No module named crcmod 1) AcuRite (weewx.drivers.acurite) 2) ?

[weewx-user] Re: Acurite 5in1 and rtl_sdr

Maybe I'm missing something but why's the R-Pi receiving the data via SDR RTL instead of directly from the Acurite console? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an

Re: \Re: [weewx-user] Register your WeeWX station!

[StdRESTful] > > [[StationRegistry]] > # To register this weather station with weewx, set this to true > register_this_station = true > Στις Κυριακή, 17 Ιανουαρίου 2021 στις 8:08:21 μ.μ. UTC+2, ο χρήστης Ξ > έγραψε: > >> Maybe ask in the B

Re: \Re: [weewx-user] Register your WeeWX station!

Maybe ask in the Belchertown theme thread in the group? For me it's enough to change in weewx.conf: [Station] # Description of the station location location = [Name of station in Greek/Bulgarian/Latin] # If you have a website, you may specify an URL station_url = [url of statio

Re: \Re: [weewx-user] Register your WeeWX station!

what's your weather station's URL? On Sunday, January 17, 2021 at 7:20:31 PM UTC+2 hobbyl...@gmail.com wrote: > all the greek stations are have english characters. i was cheking this. > also changing the name of the station in weewx.conf and restarting weewx, > my weather station dont yet appea

Re: [weewx-user] Register your WeeWX station!

he map are using ASCII characters. Clicking around the globe, I've found a > few that use Latin-1 characters, but none that use more than one byte. > > On Sun, Jan 17, 2021 at 6:50 AM Ξ wrote: > >> I've just changed my station name to Greek (Ντόλνι Οκόλ) and it's on t

Re: [weewx-user] Register your WeeWX station!

ASCII characters. Clicking around the globe, I've found a > few that use Latin-1 characters, but none that use more than one byte. > > On Sun, Jan 17, 2021 at 6:50 AM Ξ wrote: > >> I've just changed my station name to Greek (Ντόλνι Οκόλ) and it's on the >> m

Re: [weewx-user] Register your WeeWX station!

Alternatively you can try temporarily change the station name to Latin characters and see if it appears, my station's name has always been in Latin and only now I changed it to Greek, this way we can see if charset matters for initial registration. On Sunday, January 17, 2021 at 2:38:05 PM UTC+

Re: [weewx-user] Register your WeeWX station!

I've just changed my station name to Greek (Ντόλνι Οκόλ) and it's on the map, look just south of Sofia. What's your station's URL? On Sunday, January 17, 2021 at 2:38:05 PM UTC+2 hobbyl...@gmail.com wrote: > i have my weather station since december 2020 , i had set registration to > true , afte

Re: [weewx-user] Re: AcuRite 01036 Broken pipe/Connection timed out

3 PM UTC+3 peterq...@gmail.com wrote: > I have a raspi connected to an accurite via usb and its reliable. > > I don't have clever solutions. > Try mode 3? That's what I use. > Triy a different usb cable? > Clear the display units memory? > > > On Fri, Oct

[weewx-user] Re: AcuRite 01036 Broken pipe/Connection timed out

I'd really appreciate any feedback, I'm exasperated On Monday, October 5, 2020 at 4:40:43 PM UTC+3 Ξ wrote: > Ηello, > > weewx v3.7.1 keeps loosing connection to the station: > weewx[206]: acurite: Found station at bus=001 device=005 > weewx[206]: manager: Daily summa

[weewx-user] Re: Program to modify weewx.sdb

Hi Sebastien, Change directory to where weewx.sdb is and use sqlite3, which presumably your system has: # sqlite3 weewx.sdb On Thursday, October 8, 2020 at 11:57:56 AM UTC+3 f4...@f4gqk.fr wrote: > > Hello, > > with which program can I modify a weewx.sdb file (Weewx database)? > > This is to c

[weewx-user] AcuRite 01036 Broken pipe/Connection timed out

Ηello, weewx v3.7.1 keeps loosing connection to the station: weewx[206]: acurite: Found station at bus=001 device=005 weewx[206]: manager: Daily summary version is 2.0 weewx[206]: manager: Daily summary version is 2.0 weewx[206]: manager: Daily summary version is 2.0 weewx[206]: acurite: Failed at

[weewx-user] Re: Staging Area to Experiment?

How do you spin up a throwaway instance? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the we

[weewx-user] Re: RPi weewx acurite 5-in-1 error

Today my station started doing the same AcuRite 01036, weewx v3.7.1, Arch Linux on R-Pi: Aug 08 15:02:26 alarmpi weewxd[309]: LOOP: 2020-08-08 15:02:09 EEST ( 1596888129) altimeter: None, appTemp: None, barometer: None, channel: None, cloudbase: None, dateTime: 1596888129, dewpoint: None, hea

Re: [weewx-user] Whew as a service on Raspberry Pi

I have my own .sdb back up service which looks like this below. It runs once a day but you can schedule it any way you wish and since the R-Pi's connection is a 3G modem that runs mostly on GPRS speeds it helps compressing the file first and running it independently: [Unit] Description=wxdb [S

Re: [weewx-user] Version 4

Thanks, it installed OK now but it run into a problem with CumulusRealTime: # $Id: crt.py 1477 2016-04-10 13:19:56Z mwall $ Mar 17 08:55:50 alarmpi weewxd[415]: weewx[415] DEBUG weewx.engine: Loading service user.crt.CumulusRealTime Mar 17 08:55:50 alarmpi weewxd[415]: weewx[415] CRITICAL __mai

Re: [weewx-user] Version 4

Thanks, I installed pip and at the end of the weewx install process there was this: changing mode of /home/weewx/bin/wee_device to 755 Traceback (most recent call last): File "/home/weewx/bin/wee_config", line 12, in import weeutil.logger File "/home/weewx/bin/weeutil/logger.py", line 14

Re: [weewx-user] Version 4

So I currently have 4.0.0b14, I tried installing belchertown-1.0.1 and I got the following: [root@alarmpi weewx]# /home/weewx/bin/wee_extension --install weewx-belchertown-release-1.0.1.tar.gz Request to install 'weewx-belchertown-release-1.0.1.tar.gz' Extracting from tar archive weewx-belcherto

Re: [weewx-user] Version 4

overridden > in weewx.conf. > > Look for section [[TimeFormats]] in skin.conf and TimeFormats in > weewx.conf. What do they show? > > -tk > > On Thu, Mar 12, 2020 at 3:10 AM Ξ > wrote: > >> I installed it yesterday and I wonder where the value for >> $cur

[weewx-user] Re: Looking for some new hardware

I have two weather stations: TFA Opus which I'm quite happy with, the only downside is having to change batteries often but after I connected the console to a phone charger this isn't so much of an issue, the thermo-hygro sensor batteries last much longer. The other is AcuRite 01036 and I'm not

Re: [weewx-user] Version 4

I installed it yesterday and I wonder where the value for $current.dateTime is taken from because now the date appears in the m/d/ format, I've set it to dd/mmm/ and that's how it appears under plots, but in the title it's changed, so far this is the only setting I've noticed it didn't

[weewx-user] Re: newbie

Salut Arnauld, You can look here at the supported weather stations: http://www.weewx.com/hardware.html They vary greatly in price and features. Personally, I have one TFA Opus station which is OK but I'm not too happy with the fact that I have to often replace batteries, later on I bought a s

[weewx-user] Re: Beta testers for v3.9.0 needed

Andy, --backfill-daily does on older versions what --rebuild-daily does. Here's the human readable output: 1430448660|2015-05-01 05:51:00|-4 1443433740|2015-09-28 12:49:00|-6 1446832320|2015-11-06 19:52:00|-3 1457711580|2016-03-11 17:53:00|-2 1497621180|2017-06-16 16:53:00|-2 1508676660|2017-10-

[weewx-user] Re: Beta testers for v3.9.0 needed

Hi Andy, Thanks for the suggestion. Indeed I have those values: sqlite> select dateTime, interval from archive where interval < 0; 1430448660|-4 1443433740|-6 1446832320|-3 1457711580|-2 1497621180|-2 1508676660|-4 1547560500|-12700 What I did was to move the .sdb file to the installation with we

[weewx-user] Re: Beta testers for v3.9.0 needed

For some reason above the second output is truncated after I post it, here's in full (hopefully): ./wee_database /home/wx39/weewx/weewx.conf --drop-daily Using configuration file /home/wx39/weewx/weewx.conf Using database binding 'wx_binding', which is bound to database 'archive_sqlite' Proceedi

[weewx-user] Re: Beta testers for v3.9.0 needed

To report another thing, I saw this in the system log when I stopped weewx. weewx[178]: engine: Received signal TERM (15). weewx[178]: engine: Main loop exiting. Shutting engine down. weewx[178]: engine: Shutting down StdReport thread weewx[178]: engine: StdReport thread has been terminated syste

[weewx-user] Re: Beta testers for v3.9.0 needed

To report another thing, I saw this in the system log when I stopped weewx. weewx[178]: engine: Received signal TERM (15). weewx[178]: engine: Main loop exiting. Shutting engine down. weewx[178]: engine: Shutting down StdReport thread weewx[178]: engine: StdReport thread has been terminated system

[weewx-user] Re: Beta testers for v3.9.0 needed

Does it matter that after the upgrade to 39b the section below is empty? [StdWXCalculate] [[Calculations]] ## as opposed to what it's like in the weex.conf in 3.6.1 [StdWXCalculate] [[Calculations]]

Re: [weewx-user] Re: Beta testers for v3.9.0 needed

Aaand your guess was correct. I disabled Standard. Speaking of which, any plans to introduce the battery readings to it? I can't tell you enough how much I like this feature as I've tried but failed to implement the email notification script. - Ivo On Monday, January 28, 2019 at 3:29:04 PM UT

Re: [weewx-user] Re: Beta testers for v3.9.0 needed

root root 3924 Jan 28 13:16 monthtempdew.png -rw-r--r-- 1 root root 8401 Jan 28 13:18 monthtempfeel.png On Monday, January 28, 2019 at 3:32:29 AM UTC+2, Thomas Keffer wrote: > > *Ξ* (or whatever your name is), the tall plots are just old plots, which > have not been regenerated yet

[weewx-user] Re: Beta testers for v3.9.0 needed

Oh, wait a second, I've just noticed the enlarged plots have metric values and the others imperial. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+uns

[weewx-user] Re: Beta testers for v3.9.0 needed

OK, installed it (R-Pi, Arch Linux) and it's running fine so far, but will it eventually be able to inherit the units from previous config files? I'm not too happy having to convert from imperial to metric. they're there under Units: [[[Units]]] Groups

[weewx-user] Re: Beta testers for v3.9.0 needed

I'd like to join the party but I need to know: does crt work with it? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For

[weewx-user] Re: «rainRate: 8063.992» how to make [StdQC] work?

Hi Gary, Many thanks for the hint, I've moved it and hopefully I'll no longer see such crazy spikes :) Regards, Ivo On Monday, May 28, 2018 at 1:58:08 AM UTC+3, gjr80 wrote: > > Hi, > > The reason the loop rainRate is not being QC'd is that for loop data the > QC checks in StdQC are applied be

[weewx-user] «rainRate: 8063.992» how to make [StdQC] work?

I have a new station that's been running for about a month now, it's AcuRite 01036, about once a week I see crazy values for rainRate and I delete them manually from the db. weewx version is 3.7.1, running on Arch Linux R-Pi I've set the following in weewx.conf [StdQC] [[MinMax]]

Re: [weewx-user] Re: Funky symbols in plots

Yeah... I had to learn this after 4 years of using weewx, somehow never paid attention to it :/ On Monday, May 14, 2018 at 1:06:43 PM UTC+3, Andrew Milner wrote: > > That will be because the yearly plots are only updated once a day I > believe - and I think he monthly and weekly plots are update

[weewx-user] Re: Funky symbols in plots

well, a few cycles after updating pillow these were showing up only on the yearly plots, but now I notice they're completely gone. thanks to all! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving e

[weewx-user] Re: Funky symbols in plots

ok, upgrading to python2-pillow 5.1.0-1 didn't solve it, alas. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more op

[weewx-user] Re: Funky symbols in plots

Hi Gary, I'm running python2-pillow 4.3.0-1 on an R-Pi, the OS is Arch Linux. I guess I could upgrade the version and see if that changes anything. Thanks for the feedback, Ivo -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe fr

[weewx-user] Re: Funky symbols in plots

So, half an hour later it looks like this -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://

[weewx-user] Funky symbols in plots

Hi guys, I have a new installation and on some of the plots various characters appear and they alternate all the time. They alternate in a way that not just the character after the hour value changes, but for example on some reports they can be found on, say, the 'current', 'month', and 'year'

[weewx-user] Re: 'rainBatteryStatus' on TFA Opus

Yeah, the rain sensor talks to the external thermo-hygro sensor, they're no more than 15-20 apart and I've had this station for 4 years now, so it's not a communication/reception problem. The dashes on the console were because the rain sensor batteries were flat, when I measured them they were o

[weewx-user] Re: 'rainBatteryStatus' on TFA Opus

OK, so I'm not sure what all that means, is there a problem on my end?! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. Fo

Re: [weewx-user] 'rainBatteryStatus' on TFA Opus

The station is TFA Opus, it uses the WS28xx driver as it's identical to LaCrosse Weather Pro Center 2800 Series. I don't know if the rain sensor reports bad battery status, this is what I'm trying to find out. I assume it would since rainBatteryStatus is included in the loop: Mar 16 00:01:28

[weewx-user] 'rainBatteryStatus' on TFA Opus

Hi! I wonder how 'rainBatteryStatus' is supposed to work, I mean the weather station itself only reports low battery of the outside sensor and the console (shown on it as 'RX/TX and a battery symbol' respectively)?! When the rain sensor batteries are low the indication for rain on the console

[weewx-user] Re: weewx operating systems

Hi Gary, That was quite informative, thanks :) You understood me well, I meant to say that since weewx can get the OS uptime and this is published on the map, it should easily also obtain the OS version. -- You received this message because you are subscribed to the Google Groups "weewx-user

[weewx-user] weewx operating systems

I wonder, does weewx report the OS or only the uptime?! It would be interesting to see on what it runs, for example it's available for Solaris and I'm curious if anyone actually has such a set up. -- You received this message because you are subscribed to the Google Groups "weewx-user" group.

[weewx-user] Re: Data from imported db not showing up

Ah, nice, that was an easy one, thanks a lot! :) -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit h

[weewx-user] Data from imported db not showing up

Hello, I had an separate weewx.sdb with some data from 2014, I imported it in my current weewx.sdb the following way: 1. stopped weewx 2.1. sqlite> .output weewx.sql 2.2. sqlite> .dump 2.3. sqlite> .read weewx.sql 3. Just in case (wasn't sure if necessary) I dropped and rebuilt the daily summa

[weewx-user] TFA Opus no contact with the console

Hello, Some weeks ago after I restarted weewx my station was no longer be able to sync. Normally it happens at the top of the hour but not this time. As it's at a remote site I was able to go there and press 'SET' only the other day and it worked until 2AM today. I'm running v3.6.1 but I don

[weewx-user] Re: Davis Vantage Vue

Can somebody tell me if a Davis without the console can measure the pressure? I've also been thinking of a Davis ISS (integrated sensor suite) + Cabled Weather Envoy + Data logger combination (I believe that's the minimum combination) but I'm not sure if barometer is part of the ISS or the co

[weewx-user] Re: How do I monitor for "BatteryStatus': 1"

ould have it do almost anything you want, depending > on your connectivity and of course your python skills. > > Gary > > On Monday, 10 October 2016 17:36:11 UTC+10, Ξ wrote: >> >> Hello, >> >> I have a TFA Opus station, it needs its batteries changed every now and &g

[weewx-user] How do I monitor for "BatteryStatus': 1"

Hello, I have a TFA Opus station, it needs its batteries changed every now and then, I don't live permanently where the WS is and I'm sometimes late to replace them on time. I want a simple solution that monitors the loop for any of the following values being '1' and alerting me somehow 'inTem