g(RIG_DEBUG_TRACE, "%s: freq=%.0f\n", __func__, *freq);
}
if (vfo == RIG_VFO_A)
{
priv->curr_freqA = *freq;
}
else // future support in ACLOG maybe?
{
priv->curr_freqB = *freq;
}
-Original Message-
From: Mike Lewis via wsjt-devel
step size is 10Hz on the radio.
A log excerpt is pasted below, a full log attached if not stripped.
Shutdown WSJT-X and AC Log frequency stays at 1.000.000.
73,
Mike Lewis, K7MDL
CN87xs
__
[2025-04-17 16:32:23.578614][00:00:02.940480][RIGCTRL:debug] network_flush
ael via wsjt-devel
> wrote:
>
>
> I'm sure such a patch would be accepted.
>
> Are you talking about making the popup dialog have a "Retry" button?
>
> Mike W9MDB
>
>
>
>
> On Wednesday, November 20, 2024 at 03:53:05 PM CST, mark-
chosen, at least for
the K3. No errors in syslog for this.
Using v2.6.0-rc5 on Windows 10. Split Operation - RIG and Mode = Data/Pkt.
Mike
K7MDL CN88sf
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists
08706830%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=NC3DlEGk%2FTQ27b%2FiNdJ2I7Rh1DN5F3eSykAWjWpU2EM%3D&reserved=0>
On 9/9/2022 9:16 AM, Maurizio Brameri via wsjt-devel wrote:
Dear Mike,
yes, I have disabled power manager in any device and the default audio
device is th
transmitting
on the original band.
What (if any) diagnostics would be useful?
Unfortunately I didn't check the RCs on hamlib!
Mike G0GJV
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo
l and good. Folks can choose the right mode for their
current purpose. Just check the contest mode box when contesting.
But that's not a justification to change the default to the mode that happens
to seem the most useful to you this week.
73
Mike K6ML
> On 08/01/2021 10:13 AM G
contests that use grids as
multipliers, like NA VHF).
73,
Mike K6ML
> On 06/28/2021 7:59 AM Al Pawlowski wrote:
>
>
> WSJT-x worked well for me this FD. However, I would suggest a couple of
> changes/improvements be considered.
>
> 1) In the contest log set the recor
.
Mike Lewis
K7MDL
CN88sf and EL87sm
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Bill
I'm running an Intel Core i7 860 - it would appear that this DOES NOT support
AVX.
Mike G0GJV
> Hi all WSJT-X users,
>
> we are looking into some performance enhancements that will take
> advantage of some parallel processing features of modern CPU
> architecture
/happened. Need to look at that
next time. I usually see it a few times a day. I will look to see if it is
odd or even as well. This is 2.4.0-rc4. It occurred on earlier rc versions,
maybe on 2.3 also.
Mike
K7MDL EL87sm & CN88sf
From: Rich - K1HTV
Sent: Friday, April 16, 2021 08:1
Hello Ton,
I had similar problems with 2.4.0 changing freq. Speeding up the polling rate
on LP Bridge seems to have cured it. Maybe you can change settings for the
virtual ports with your Anan?
73,
Mike Cizek W0VTT
From: Ton PA0TBR
Sent: Thursday, 15 April, 2021 01:55
To
Thanks Mike. I’ll install it, play with it and get back to you some time
tomorrow.
73,
Mike Cizek W0VTT
From: Black Michael via wsjt-devel
Sent: Saturday, 20 March, 2021 16:19
To: WSJT software development
Cc: Black Michael
Subject: Re: [wsjt-devel] Bug Report v2.4.0 rc3 K3s
Further testing with the version Mike W9MDB sent me the other day:
Split Operation > Fake It still does not work correctly. Examples:
FT8 - transmit dF 2000Hz; radio moves up 1 kHz to transmit (should only go up
500 Hz?), but down only 500 Hz each cycle
MSK144 - calling CQ 263, starts out
someone could explain.
Thanks again,
Mike – G4WNC
From: Glenn
Sent: 19 March 2021 16:54
To: WSJT software development
Subject: Re: [wsjt-devel] Transmit audio failure with WSJT-X 2.3.0 and
Raspberry Pi
Hi Mike
I have noticed the same issue. The workaround is to not select pulse
sound card. 1 USB cable for both audio and rig control
Lenovo Thinkpad WIN10 Pro
THANK YOU!
Just decoded a CQ from Z8RRUFL09OW. That’s some SERIOUS DX!
73,
Mike Cizek WØVTT
> On Mar 18, 2021, at 5:43 PM, Bill Somerville wrote:
>
>
>> On 18/03/2021 22:25, Joe Taylor wrote:
>
Thanks Bill,
Using Split Operating > Rig seems to work fine on FT8. I can’t find anyone on
meteors right now to test it split on MSK144.
Mike W9MDB – will download and install that new version now and report back.
73,
Mike Cizek W0VTT
From: Bill Somerville
Sent: Thurs
Hello Bill,
No, there is no VOX. PTT is provided via the USB cable.
73,
Mike Cizek W0VTT
From: Bill Somerville
Sent: Thursday, 18 March, 2021 11:05
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Bug Report v2.4.0 rc3 K3s Freq Control
Mike,
it is
ack tab. But it doesn't appear when WSJT-X is in the
failed state.
I do hope someone can help with this.
Mike - G4WNC
wsjtx_syslog_2021-03.log
Description: Binary data
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforg
Hello Bill,
Highly unlikely, and maybe not possible. The “audio” between the rig and
computer is all digital; sound card is built in to the radio. As noted, v2.3.0
and earlier all worked fine.
73,
Mike Cizek W0VTT
From: Bill Somerville
Sent: Thursday, 18 March, 2021 10:49
Hello Bill,
Guess I should have included all settings:
Baud Rate: 38400
Data Bits, stop bits, handshake: Default
PTT Method : CAT
Mode: Data/Pkt
Split Operation: Fake It
73,
Mike Cizek W0VTT
From: Bill Somerville
Sent: Thursday, 18 March, 2021 10:19
To: wsjt-devel
.
WSJT-X v2.4.0 rc3; Mode = Data/Pkt; Split Operation = Fake It
Elecraft K3s with internal sound card; single USB cable for both audio and rig
control
Lenovo ThinkpadX390; i7 CPU; WIN10 Pro
Thank you.
73,
Mike Cizek W0VTT
___
wsjt
- K3-VHF"
At line 683 of file C:\Users\bill\src\k1jt\wsjtx\lib\qra\q65\q65.f90
Fortran runtime error: Index '-7' of dimension 1 of array 'spec' outside of
expected range (1:750)
Mike
K7MDL EL87sm & CN88sf
___
wsjt-dev
I have a report from a friend that he has to use FTDX10 to make things work
with his FTDX-101MP
Mike
K7MDL EL87sm & CN88sf
From: Hartmut Luedtke via wsjt-devel
Sent: Friday, March 5, 2021 14:35
To: wsjt-devel@lists.sourceforge.net
Cc: Hartmut Luedtke
Subject: [wsjt-devel] Error using WS
e some ISI and slight sensitivity reduction.
On the other hand, unshaped keying is easy to tone convert accurately. Glad to
hear that the microwave modes are continuing to use unshaped keying.
73,
Mike
> On 02/22/2021 11:51 AM Joe Taylor wrote:
>
>
> On 2/22/2021 2:41
I read that FT4, FT8, FST4, FST4W use Gaussian FSK.
Is it correct that all the other modes use unshaped keying?
Specifically, does Q65 use gaussian or unshaped keying?
Thanks,
Mike K6ML___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
.
Mike
K7MDL EL87sm & CN88sf
From: Bill Somerville
Sent: Tuesday, February 16, 2021 14:56
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Continuing decodes on Q65 mode
On 16/02/2021 19:47, Mike Lewis wrote:
I just finished a Q65 contact on 2M and after the QSO completed, no
power level. So far I do not think the slider adjustment has any impact. It
works for several toggle events then reverts the non-tune power setting well
after the slider change was done.
Mike
K7MDL EL87sm & CN88sf
From: Mike Lewis
Sent: Tuesday, November 3, 2020 15:24
To: 'k...@arrl.net
back up. Very
random.
Mike
K7MDL EL87sm & CN88sf
From: Mike Lewis
Sent: Tuesday, November 3, 2020 14:19
To: k...@arrl.net; WSJT software development
Subject: RE: [wsjt-devel] RC1 Tune problem
I have found a similar random seeming event but somewhat frequent. I use the
Tune button with
expected, who knows.
Mike
K7MDL EL87sm & CN88sf
From: Al
Sent: Tuesday, November 3, 2020 13:01
To: WSJT software development
Subject: [wsjt-devel] RC1 Tune problem
You may already have this one..
1) With TX odd/1st selected and observe the TX audio out of WSJT...
2) at 3 seconds into
Can also be something like HDMI video circuit in a laptop going to sleep after
startup, even if you are not using the external connector. Found that last
year on my new laptop.
Mike
K7MDL EL87sm & CN88sf
From: Bill Somerville
Sent: Saturday, October 31, 2020 15:44
To: wsjt-d
things going again - but the at next transmission it would be likely to
get cleared again.
This didn't always happen; and I don't remember any cases of it getting
automatically checked.
Thanks to all for the software.
Mike G0GJV
___
ot of
run time on MSK144 in EU mode for us.
Mike Lewis
K7MDL
CN88sf and EL87sm
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
and start these com threads for events like usb serial
disconnect. Allows for graceful resumption when the user fixes the problem
My source is also on Github and includes the pyWSJTX
Mike
K7MDL
Sent from my T-Mobile 4G LTE Device
Get Outlook for Android<https://aka.ms/ghe
attached to a rf log detector and
standard dual directional coupler.
It would seem the UDP status message has all you would need?
Mike
K7MDL
Sent from my T-Mobile 4G LTE Device
Get Outlook for Android<https://aka.ms/ghei36>
From: alaw...@mudhawk.com
Sent:
Thanks!
How do I find the development branch? I found the errant code in the
"master" branch.
From: Bill Somerville
Sent: Friday, July 17, 2020 09:12
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Introduction and merge request
On 17/07/2020 15:55, Mike
Hello!
I'm Mike (K7ZCZ). I've been writing software for a long time, but I'm mostly
retired now.
After updating to WSJTX 2.2.2, I noticed a problem with the ADIF files. I've
submitted a merge request to correct it. Hopefully, I'm not stepping on my
toes; it's
have Realtek audio and you are missing audio ports, this might be a
solution. Been a long time since these had been messed with, almost forgot
these settings existed.
Mike
K7MDL EL87sm & CN88sf
-Original Message-
From: Morris Wideman via wsjt-devel
Sent: Wednesday, June 17, 202
.
Benefit:
Such a capability would surely lead to higher contest scores and increased
utilization of the higher bands. Use of web pages and emails do not address
the great quantity of random contacts which is the nature of most non-EME/MS
contesting.
Mike
K7MDL EL87sm & CN
e rig into split mode it needs to send a
command to also set the VFO-B mode to USB-D. That message appears to be
absent. Works fine on VFO A.
Mike
K7MDL EL87sm & CN88sf
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.
clicking to reply, or hitting "Generate Standard
Messages", clear it back to "TEST".
Mike G0GJV
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
) which the developers evaluated and determined was not
appropriate at the time for the mainstream radio owner/operator target of
WSJT-X.
* Mike
From: Jon Anhold
Sent: Sunday, January 12, 2020 17:18
To: WSJT software development
Subject: Re: [wsjt-devel] IC-7610 Sound Card Input - 2
program is
closed.
Thanks & 73
Mike /G3WPH
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
#x27;t cover the case where their clock is way off as they won't see any
decodes. The only solution for that would be doing a time query from a known
source and I don't thi
JTAlert is very much tuned to this purpose. It uses callsign databases but has
its own database that lets you filter what you are looking for, states,
counties, grids, countries, directional calls, ….
Mark off which state you need and it alerts via visible and/or audible means
when the call d
niRig is
> dropping the frequency change request to return to the requested frequency.
>
>
> de Mike W9MDB
>
>
>
>
> On Saturday, May 18, 2019, 6:55:01 AM CDT, Mike
> wrote:
>
>
> I am forwarding this conversation to amke sure you all know about this ...
>
&
In any case it does NOT happen when I go back to Omnirig 1.16.
Even with different settings. Omnirig 1.16 causes no problems at all.
I wrote the developer of Omnirig and got this response -
Hi Mike,
Thank you for reporting the problem. The frequency change by 55 Hz is not a
bug, WSJTX makes t
Thanks for the input and replies.
Mike KE4BKL
On Fri, Apr 26, 2019, 12:02 PM Bill Somerville
wrote:
> Hi Mike,
>
> as others have suggested, AP decoding will raise the probability of false
> decodes a little. One thing you can do to reduce the false decode
> probability is
FT8 and all bands. It just pops up.
On Fri, Apr 26, 2019 at 11:28 AM Bill Somerville
wrote:
> On 26/04/2019 16:04, Mike Oakley wrote:
> > I continue to get false decodes everyday even when I am not
> > transmitting, for example today I cut my rig on and loaded the
> > soft
And thanks for the reply as well.
On Fri, Apr 26, 2019, 11:24 AM Mike Oakley wrote:
> From what I gather the false decodes always end with the ?a2 so far but
> some from what I am getting do not have that. I just didn't know if it was
> something I was doing wrong that's all.
tterns in the static can make the program spit out a false decode
> and it is just something that happens.
>
> 73,
>
> Jim S.
> N2ADV (ex KD2BIP)
>
> > On Apr 26, 2019, at 11:04 AM, Mike Oakley wrote:
> >
> > I continue to get false decodes everyday even when I
I continue to get false decodes everyday even when I am not transmitting,
for example today I cut my rig on and loaded the software and then I got a
false decode before anything even popped on my screen. Can someone tell me
why I am getting these and how do I stop them?
development
Subject: Re: [wsjt-devel] Busy CPU
Hi Mike,
Neither of the cases you describe is the result of a slow or overburdened CPU,
which is what K0VM thought he was observing.
Obviously you must have a properly functioning audio system with no buffer
underruns, etc., or decoding will be
remote site. I have to keep the RDP session active all
the time, and cannot tolerate any internet hiccups, so cannot monitor through
the nights reliably.
73,
Mike
K7MDL
-Original Message-
From: Joe Taylor
Sent: Monday, March 4, 2019 15:00
To: WSJT software development
Subject: Re: [wsjt
] Incorrect switch from tx3 to tx1
Friend of mine saw this.
CO2VDD replied to WA1SXK R+07 but then decided to finish a QSO with IZ6AAW and
WJST-X then decided to send TX1 when it should have sent TX3 again.
[Inline image]
de Mike W9MDB
___
wsjt-devel mailing
pen.
Thanks
Mike
On Thu, Feb 21, 2019 at 4:39 PM Bill Somerville
wrote:
> On 21/02/2019 21:02, Tag Loomis wrote:
>
> First time message to the group.
>
> Would it be possible to have the current transmitting message be emitted
> in either in the Status Out message after “S
retry interval until and ultimate timeout.
2. Print to screen and file reason why (text or icon, flashing monitor in
red perhaps).
3. File text would include timestamps for later troubleshooting.
Tnx!
Mike K7MDL
___
wsjt-devel mailing list
wsjt-devel
capture for example).
* I see this in JTDX at times like startup.
* Print out the number of buffer requests achieved (such as "Frames 47
of 50" for the values of m_ihsym and m_hsymStop variables. Provides instant
tell of audio dropout iss
dvanced Power Options screen snapshot:
[cid:image001.png@01D4B761.58324FF0]
I would like to thank Mike W9MDB for his many hours of assistance during this
exercise, we now have the means/knowledge to easily spot such effects.
Understanding the reason for them is still an art and likely case
ked on the band before. That is
all based on the existing UDP interface.
The request is to enable a response to a QSO to be made in a way that minimises
QRM to other users.
Like you, I enjoy making QSOs, but I also enjoy writing software.
73,
Mike /G3WPH
-Original Message-
From: D
ion.
One last thought, just because I'm the first person to request the
functionality doesn't mean it's a bad idea.
Again, thanks & 73
Mike /G3WPH
-Original Message-
From: Bill Somerville
Sent: 22 January 2019 12:28
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [w
would compromise the ’useful co-operative
service’ concept of the UDP interface.
I’d be pleased to learn of any existing ways to achieve the functionality I’m
looking for within the current WSJT-X implementation.
Many thanks & 73
Mike /G
X1 for
several periods. My bad, but happens to often.
Thanks!
Mike, K7MDL
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
.
Additionally, since the 2nd and 3rd+ instances are not connected to the radio,
they do not change band info, so more than once I had the wrong band reported
for the spots it did make. Now I try to make it a routing to disable spotting
for non-rig connected instances.
* Mike K7MDL
From
the middle could result I think either/or pre and post switch
data. I believe this is a bug and suggest dumping spots when a band change is
made in that decode cycle.
73,
Mike K7MDL
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https
Ham Radio Deluxe. This may also be a hardware or driver issue. It is
a new design being a 8th gen core I5 box. For now I am running a Network
Speedtest app in the background (idling) to get the CPU to 14, works fine then.
* Mike K7MDL
From: Brian Dickman
Sent: Saturday, January 12, 2019 12
I just got some interesting results on this problem. Still working with Mike
W9MDB on various investigations and debugging, we are thinking there is a
timing issue unique to this 8th Gen CPU and chipset or driver bug, resulting in
dropped audio bits someplace, but I thought this is worth
load it seems now.
Started with audio programs by chance, but moved on to other programs like
weather and speedtest and solitaire apps to get the CPU over 10%.
* Mike K7MDL
From: Bill Somerville
Sent: Saturday, January 12, 2019 05:31
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt
max perf power mode.
As this laptop is now 3,000 miles from me I cannot poke around the BIOS and
mess with setting there so limited to things at the OS level.
Next step will be to try another time sync program and see what happens. But
it is after 4am now.
Mike K7MDL
From: Mike Lewis
Sent
was
not created. I expected a .wav file would be created for every 15 seconds,
decode or not. There were good signals decoding on the old laptop at the same
periods.
This is all in FT8 mode (which I failed to mention), I have not tried other
modes, something else worth a look.
Mike K7MDL
From
und and other experience options to lighten the load, or increase
priority, but these type of changes have no effect on the new laptop.
Thanks for reading,
Mike
K7MDL
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.
.
In the past this has been a simple update to NIST for clock settings. Now
seems not effective. The timing sequence seems OK.
Other modes also affected (JT65, MSK144).
Any help is greatly appreciated.
Mike
KB4ABE
___
wsjt-devel mailing list
wsjt-
Bill,
with this setup on my TS-480, FT-450 and Flex 5000a, everything works great.
The problems showed up on a friends radio FT-847. It only is an issue on
UHF, thus not really a huge deal.
I questioned it to see if there was any ideas.
I have a work around I am going to try to test for him...
Omni-rig is only running via WSJT. Both are shared against a serial port
splitter via VSPE.
There is something about how WSJT handles the control directly, that it
wont work (hangs up N1MM when set that way) but when you use omni-rig on
the WSJT side things work ok.
Mike
On Wed, Dec 19, 2018
:11 PM Mike Maynard wrote:
> Bill, that is something I am not sure about, we were working over the
> phone.
>
> It only happened on UHF though. Wouldnt the calibration fields effect all
> frequencies? (although, I guess if they were skewed just right)
>
> Mike
>
>
Bill, that is something I am not sure about, we were working over the phone.
It only happened on UHF though. Wouldnt the calibration fields effect all
frequencies? (although, I guess if they were skewed just right)
Mike
On Wed, Dec 19, 2018 at 12:53 PM Bill Somerville
wrote:
> On 19
automatically. It additionally will add 10hz after release of
the TX on any subsequent TX cycle, including using the Tune button.
This happening with a Yaesu FT-847.
Has anyone else seen such a thing?
--
Mike
K2GC
www.k2gc.net
___
wsjt-devel mailing list
Did anybody read my suggestion? Never got any feedback from it - I thought
it was a pretty good idea.
:-(
On Thu, Dec 13, 2018 at 8:07 AM Mike wrote:
> Hello,
>
> Using the new version 2 and very impressed with it - thanks!
>
> This is just to offer a suggestion for the futur
the user a little note -
Notice (1)
at the top of the window letting them know that a message is available to
read. Messages such as "We have a new version available it's time to
upgrade!" :-)
Just a thought thanks for the work you do!
Mike N5INP
_
t says "hey, put the current grid
square here" I am sure I could make it work.
Thanks for listening to me complain
Mike
K2GC (sometimes /M!!)
On Tue, Dec 11, 2018 at 8:16 PM Bill Somerville
wrote:
> On 12/12/2018 00:02, Mike Maynard wrote:
> > Well, I shall start with the fa
il I tried to use my mobile callsign I fully supported.
On Tue, Dec 11, 2018 at 6:28 PM Bill Somerville
wrote:
> On 11/12/2018 22:30, Mike Maynard wrote:
> > the problem I have with this is, it does not allow me to maintain
> > separate logs for different operating conditions.
>
not allow me to maintain separate
logs for different operating conditions.
I am just trying to figure out how I can continue to operate as K2GC/M and
have everything work properly, and still get a proper exchange out there.
Mike
K2GC
On Tue, Dec 11, 2018 at 3:15 PM Joe Taylor wrote:
>
cq with
no grid, and the software will out it in the exchange later?
On Tue, Dec 11, 2018, 9:49 AM Bill Somerville On 11/12/2018 01:41, Mike Maynard wrote:
>
> So I installed v2.0 GA on my 'mobile' setup today. I no longer have a
> grid square in my standard messages with /M on m
Gary, the field wont allow anything but letters, numbers and that / no
spaces.
On Mon, Dec 10, 2018 at 10:24 PM Gary McDuffie wrote:
>
>
> > On Dec 10, 2018, at 18:41, Mike Maynard wrote:
> >
> > So I installed v2.0 GA on my 'mobile' setup today. I no
2.0GA) and it does the same thing.
this was a non-issue in 1.9.1 Did I miss something? or is this a bug?
--
Mike
K2GC
www.k2gc.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
SJT-x? This
is by design? Why? Is this a bug in Yaesu's firmware? Where is this
frequency coming from?
Mike
On Tue, Nov 27, 2018 at 5:19 PM Mike Saeger wrote:
> My FTDX3000 works fine on FT8 on all bands except 60 meters.
> The FTDX3000 has preset channels. The channel in memor
My FTDX3000 works fine on FT8 on all bands except 60 meters.
The FTDX3000 has preset channels. The channel in memory 3 is preset to
5.358.500. When I turn on Enable TX I can send one transmission. When the
transmission is over, WSJT-X tries to set my VFO to 5.358.308.
I don't know where this freque
ood idea to but a
big red notice right at the top - right now - so people hunting for an
answer will see it as the *first thing they notice* if they go there - at
the TOP - in *BOLD*?
Mike N5INP
On Fri, Nov 23, 2018 at 11:46 PM Peter Sumner wrote:
> Hello to the Dev team,
> with th
case I wasn't as smart as you fellows are. :-)
Mike N5INP
___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
one and it
works!
Mike N5INP
On Tue, Nov 13, 2018 at 2:25 PM Bill Somerville
wrote:
> Hi Mike,
>
> comments below.
>
> On 13/11/2018 20:13, Mike wrote:
>
> The "New Call" color annunciation is triggering falsely. It's claiming
> N2ADV when he'
The "New Call" color annunciation is triggering falsely. It's claiming
N2ADV when he's calling CQ on 20 meters today is a new call, but the
contact is definitely still in the file as a contact from 2014.
Also still getting the "Error loading LoTW Users data" error when starting
the program.
__
More on previous reply, I will using hold tx frequency if that could
have any bearing.
Mike
On 10/28/2018 6:03 AM, Black Michael via wsjt-devel wrote:
You must be double-clicking the wrong message.
If this was a bug we'd have all sorts of complaints.
Can you give an example of what yo
.
I went back now and tried again and it worked correctly. I will keep an
eye on it. It might be an RF in the shack problem disabling the mouse
click, but that usually locks it up until I unplug the mouse and plug it
back in.
Mike, AK7ML
On 10/28/2018 6:03 AM, Black Michael via wsjt-devel
e and
antennas so-so. Combined with 0 sunspots I am not surprised.
73,
Mike
AK7ML
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
in. CQ WW 599 04. Done and gone, the DX does not and
does not have to send back anything. Stop trying to force your way on
others. Thanks.
On 10/15/2018 2:58 PM, Bill Somerville wrote:
On 15/10/2018 21:30, W0MU Mike Fatchett wrote:
I don't need to see rr73 or 73. I prefer making con
I don't need to see rr73 or 73. I prefer making contacts instead of
finding reasons not to have contacts. On CW or SSB working rare dx you
never get a 73 so why do you need it here? You don't! Have fun and log it.
W0MU
On 10/15/2018 2:11 PM, Bill Somerville wrote:
On 15/10/2018 20:16, IK1HJ
Thanks for the feedback everyone! I appreciate it and look forward to
future improvements.
Mike - N5INP
On Wed, Sep 26, 2018 at 9:55 AM Joe Taylor wrote:
> Thanks to everyone who commented on the color-highlighting of decoded
> messages in WSJT-X 2.0-rc1 and -rc2. We appreciate heari
So does no one have any idea how the logic of the decoded call color
assignments works when multiple conditions arise at the same time? Is there
any way to disable any of the colors such as New Grid and New Grid on Band?
On Tue, Sep 25, 2018 at 12:18 PM Mike wrote:
> I was trying to change
bove.
You can pick other examples as well. What is the logic for the colors when
multiple conditions arise for the same call sign? Can the program please
include an option such as check boxes to actually disable the particular
decode alert color, not simply change it's colo
by an extra pair of free form messages
are inhibitors that can easily be removed. Why not add this to our toolbox?
73, Mike
PS: In reviewing the MSK144 writeup, I noticed the mention of the call sign
hashing, which I'm guessing is also used in the DXpedition mode compound reply
(report
1 - 100 of 137 matches
Mail list logo
