x27;t
have time to load Xastir.
73's
On Oct 31, 2008, at 10:16 AM, Curt, WE7U wrote:
On Fri, 31 Oct 2008, Keith Kaiser wrote:
The big question is why do the gateway stations that show up on
Xastir not have there own switch to show or not show? Or at least
let us set them up with an ta
, 2008, at 11:28 AM, Craig Anderson wrote:
The best way to handle this is run your APRS stations on a frequency
other than 144.39. This assumes you don't need, or can replace, all
the digipeaters and other infrastructure on 144.39.
Craig
On Oct 30, 2008, at 9:22 AM, Keith Kaiser wrote:
I'll do this sounds like fun.
Thanks.
On Oct 30, 2008, at 11:24 AM, Curt, WE7U wrote:
On Thu, 30 Oct 2008, Keith Kaiser wrote:
I would want them to be transmitted over RF. What would be the
format if I wanted to use a text editor to set them up, with about
10 to do that would
show and not all the clutter of several hundred APRS stations.
By the way what is the difference between an object and an item?
Thanks for taking time to help us out.
On Oct 30, 2008, at 10:46 AM, Curt, WE7U wrote:
On Thu, 30 Oct 2008, Keith Kaiser wrote:
Suppose I want to create an object for
I would want them to be transmitted over RF. What would be the format
if I wanted to use a text editor to set them up, with about 10 to do
that would take much less time than one at a time inside of Xastir.
On Oct 30, 2008, at 10:46 AM, Curt, WE7U wrote:
On Thu, 30 Oct 2008, Keith Kaiser
Suppose I want to create an object for all the local hospitals in our
area for a SET we have this weekend. Is there a way to create a file,
in advance, and just activate it when needed? Similar maybe to the way
we can create a file for tactical calls?
That did it Tom, thank you so much for the help and quick response.
73's.
On Oct 28, 2008, at 10:55 AM, Tom Russo wrote:
On Tue, Oct 28, 2008 at 10:41:33AM -0500, we recorded a bogon-
computron collision of the <[EMAIL PROTECTED]> flavor, containing:
I have a definition in my Interface Contro
I have a definition in my Interface Control set up to talk to my
KPC3+. I mistakenly assumed that the disconnect side of it would be;
tnc-stop.kpc3 similar to its startup of tnc-startup.kpc3 but its not
that and now I can't stop the interface.
In fact if I try to stop it Xastir freezes and
Most (not all) of the times when I STOP an INTERFACE Xastir itself
quits. Because I launch Xastir via my X11 windows environment on Mac
OSX I don't know much about turning on the various logging
capabilities of it. What would the launch look like in the Unix
environment to turn on logging s
"Enable Map Levels" was on, the problem was the old maps I was using.
I've downloaded the needed maps from the SE files and they work and
look great. I'll probably not use the old water files I had, just a
lot of disk space to do what is pretty much already on the map.
On Sep 24, 2008, at 9
This is great information.
So with this new county data in two formats, do I still need to have
a folder for water by county which I currently do. Or is this a type
of polygon that would be in the new Polygon data anyway.
On Sep 24, 2008, at 3:55 PM, Tom Russo wrote:
On Wed, Sep 24, 2008
When I download the new new Missouri counties for example do I need to
keep both the Polygons and Polylines files?
On Sep 24, 2008, at 2:56 PM, Tom Russo wrote:
On Wed, Sep 24, 2008 at 02:38:08PM -0500, we recorded a bogon-
computron collision of the <[EMAIL PROTECTED]> flavor, containing:
O
On the county files I think you are correct. I'm now downloading the
new county files (2 or 3 anyway) and plan to play with them a bit. I
would really like the smaller roads to go away as I zoom out, it gets
awfully crowded on that screen when every single lane, dirt road and
path is render
Tom,
Is there a source file someplace that tells me what all the sig items
mean so I can design my dbfawk accordingly? This for example is one of
my county files.
sig:
MODULE:FILE:CENID:POLYID:STATECU:COUNTYCU:TRACT:BLOCK:BLOCKSUFCU:RS_A1:AIANHHFPCU:AIANHHCU:AIHHTLICU:ANRCCU:AITSCECU:AITS
Hmmm! Much better thanks for keeping me honest. Now I just have
to learn more about what I'm doing with it lol
testawk -D /usr/local/share/xastir/config -d /usr/local/share/xastir/
maps/Counties/MO/MO_Platte_County_Poly.dbf
90 Columns, 3453 Records in file
sig:
MODULE:FILE:CENID
You are right of course that is where I got it, sorry! I didn't
understand what to do. But I've recompiled Xastir and did what you
said with the sudo stuff and now when I execute testawk I get this;
$ testawk -D /usr/local/bin -d /usr/local/share/xastir/maps/Counties
Couldn't find dbfawk sigs
I'm trying to use testawk as suggested by Tom Russo, when I enter this;
sh /Users/kkaiser/Downloads/testawk.sh -D /usr/local/share/xastir/
config -d /usr/local/share/xastir/maps/Counties
What I get in part is this; (these are only snips not the entire file)
But this doesn't feel right to me,
Am I sure the dbfinfo line is correct no. Now that you say that.
On Sep 23, 2008, at 1:21 PM, Tom Russo wrote:
On Tue, Sep 23, 2008 at 01:14:16PM -0500, we recorded a bogon-
computron collision of the <[EMAIL PROTECTED]> flavor, containing:
Below is an output snapshot of Xastir, please not
I didn't actually send an attachment of any kind, I sent a link to a
web site (http://kaiserklan.com/xastir/snapshot.png) and the contents
of the dbfawk file called MASTER. Which is;
# BEGIN is called once per dbf file which contains multiple records.
BEGIN {
# dbfinfo is the "signature" of t
Below is an output snapshot of Xastir, please note the grid square
lines and lack of labels.
Below the link is the file MASTER.dbfawk, it seems no matter what I
use for any of the color= values it never changes what I see on
screen. Please note the snapshot includes the about help file so you
change maps.
On Sep 22, 2008, at 2:19 PM, Curt, WE7U wrote:
On Sat, 20 Sep 2008, Keith Kaiser wrote:
First, I'm still having a problem at higher zoom levels seeing the
grid square number, I see the lines but not the numbers, not sure
why. On the same note I'd like to know if
Eric,
Now that the hurricanes have passed and things have gotten back to
normal (at least a little), thanks for the great hurricane coverage by
the way, I'd like to get back to the grid squares you did up for us.
I loaded all 350 meg of files into the maps folder of Xastir. But like
you w
I put the NH2 and NH4 folders inside the grids folder, I was sure to
select the NH4 folder in Maps Chooser.
On Sep 12, 2008, at 1:10 PM, Eric Germann wrote:
Did you put all three files in the same directory. The numbers come
from the dbf file
EKG
Keith Kaiser wrote:
I put the MH4 in
them from
http://www.n1ics.net/node/47
and add them as layers.
I add them as a topmost layer
EKG
Keith Kaiser wrote:
Oh boy! Now you did it. Now I see things I would really like. For
example how do you get the grid square numbers to show up? I'm
guessing you have the map backgro
Thanks a lot Eric.
Keep up the great work.
On Sep 11, 2008, at 10:45 PM, Eric Germann wrote:
They're shapefiles I calculated. You can grab them from
http://www.n1ics.net/node/47
and add them as layers.
I add them as a topmost layer
EKG
Keith Kaiser wrote:
Oh boy! Now you did it.
pplers in the Gulf (maybe they ought
to park one on an oil platform.) In my PNG, if you look in grid
square EL58, I think that precip return is maybe the edge of an
outer rain band. Ditto for EL27/EL28.
EKG
Keith Kaiser wrote:
Sorry to keep buggin you.
Does it need anything special
How do I make use of these in Xastir?
On Sep 11, 2008, at 7:34 PM, Eric Germann wrote:
FWIW, here is one that uses Iowa State instead of TAMU (also
attached) ...
Good luck and stay dry
73,
N1ICS
AAR5CP/T
#US Composite Radar image (Unidata/LDM/Gempak) n5jxs 2003 08 25
# Modified for accur
e
of it. It's been a while since I switched from fink to macports (I
found that having both installed would really confuse things), but I
think there is a similar command like "fink uninstall
". Check "man fink" to get the correct syntax.
Bob, N7XY
On Sep 11, 20
The thing about your note that caught my attention was in step #1
where you say "so I removed and installed". My question is how on
earth did you remove openmotif? I have tried everything and have not
been able to get rid of it, I've over installed both a newer and older
version and I'v
an
needed and in anything but an easy to use UI.
Thanks. guys for all you do.
On Sep 9, 2008, at 12:15 PM, Curt, WE7U wrote:
On Sun, 7 Sep 2008, Keith Kaiser wrote:
Thanks David and Kevin, I do wish I could track multiple and zoom
to fit and have used the tactical call method sug
Gerry Creager wrote:
The tactcial callsign usage will work for a bike ride. It's worked
for me before. What problems are you having implementing it?
73 gerry
Keith Kaiser wrote:
Thanks David and Kevin, I do wish I could track multiple and zoom
to fit and have used the tactical call
the other normal responders to questions
like this are out playing near North Bend, Washington. I'd be out
there
too if it wasn't for relatives and my work schedule.
Dave
KD7MYC
Keith Kaiser wrote:
What I'm wondering is how to track more than one station at a time?
_
I'm working the MS Bike Ride right now. What I'm wondering is how to
track more than one station at a time?
Thanks guys.
___
Xastir mailing list
Xastir@xastir.org
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
Wow! Great answers guys, I really appreciate it. All the answers and
examples also show how much I still have to learn about Xastir and
what it can and can not do. Would love some day to see the
implementations and how they are used by some of you.
On Sep 4, 2008, at 3:05 PM, Tom Russo wro
I'm looking at Hanna and Ike on Xastir, but each has a number of
circles, red, green, yellow around them. Would someone in the know
please give me (and the rest of us land lubbers) the skinny on this,
tell us how all this happens.
___
Xastir mailin
On Sep 2, 2008, at 10:52 AM, Tom Russo wrote:
On Tue, Sep 02, 2008 at 10:17:08AM -0500, we recorded a bogon-
computron collision of the <[EMAIL PROTECTED]> flavor, containing:
Thanks Curt,
I guess I'm going to have to wait for Apple to update OpenMotif
internally because no matter what I do
On Sep 2, 2008, at 10:30 AM, Bob Nielsen wrote:
On Sep 2, 2008, at 8:17 AM, Keith Kaiser wrote:
On Sep 2, 2008, at 9:11 AM, Curt, WE7U wrote:
On Mon, 1 Sep 2008, Steve Friis wrote:
Keith Kaiser wrote:
So I've been told. I loaded both LessTif and the older version
of OpenMoti
On Sep 2, 2008, at 9:11 AM, Curt, WE7U wrote:
On Mon, 1 Sep 2008, Steve Friis wrote:
Keith Kaiser wrote:
So I've been told. I loaded both LessTif and the older version of
OpenMotif but because I don't know how to get rid of the older
version of OpenMotif, how to delete it com
:
Keith Kaiser wrote:
So I've been told. I loaded both LessTif and the older version of
OpenMotif but because I don't know how to get rid of the older
version of OpenMotif, how to delete it completely in other words,
I've not been able to make Xastir use the newer version.
I
Lesstif or downgrading
to openMotif version 2.23 or 2.24 would give you the slider menu text.
Lee - K5DAT
Murphy, TX
On Sun, Aug 31, 2008 at 10:31 PM, Keith Kaiser <[EMAIL PROTECTED]>
wrote:
I wanted everyone to know I got it working. First I installed
Lesstif then I
installed ImageMa
on my MacBook Pro.
Thank you Bob and Jason and other who helped.
On Aug 31, 2008, at 2:14 PM, Bob Nielsen wrote:
On Aug 31, 2008, at 10:44 AM, Jason KG4WSV wrote:
On Sun, Aug 31, 2008 at 12:05 PM, Keith Kaiser <[EMAIL PROTECTED]>
wrote:
checking for Motif headers. . . configure:
I run Xastir on my MacBook Pro, I can install, run, even modify it
pretty well, in part thanks to people on this list.
My wife (also a Ham) wanted me to install Xastir on her MacBook, so I
pulled out my trusty notes and got to work. The first thing I did was
install all the X windows and De
, WE7U wrote:
On Sun, 17 Aug 2008, Keith Kaiser wrote:
I don't find DB4 in my /sw/ anyplace so I'm guessing I don't have
it installed. It's really kind of strange, I have searched and
searched with Google looking for DB4 to put on OS X and can't find
a distribution.
ck=/sw/lib/ImageMagick-6.3.7
make
sudo make install
sudo chmod 4755 /sw/bin/xastir
/* end here */
Notice I've removed the --with-rtree as you suggested. I really don't
know what the ./bootstrap.sh does but I've alway used it too.
On Aug 17, 2008, at 1:49 AM, Curt, WE7U wrote:
That is the only menu that does not have labels. All the other ones
look just fine.
On Aug 16, 2008, at 8:22 PM, C. Griffin wrote:
Do you have labels in the other windows?
On Aug 16, 2008, at 19:31, Keith Kaiser wrote:
I even rebooted after. But I still don't have menu names in T
I did everything you suggested here Curt, removed every trace of
LessTif I could find from my machine. Installed OpenMotif-2.1.32-22i
into usr/ and then ran the following;
./configure --prefix=/sw --with-rtree --with-bdb-incdir=/sw/include/
db4 --with-bdb-libdir=/sw/lib
I even rebooted aft
I installed OpenMotif v2.1.32 how do I make sure Xastir picks it up?
After the load I ran Xastir and it still has the same problems.
On Aug 16, 2008, at 1:47 AM, Curt, WE7U wrote:
On Fri, 15 Aug 2008, Lee Bengston wrote:
Unfortunately I don't have any experience with Mac OS X. Evidently
t
I'm running Mac OS X in X11 window. If you can tell me how to fix that
I would be a very happy camper.
On Aug 15, 2008, at 10:27 PM, Lee Bengston wrote:
On Fri, Aug 15, 2008 at 4:43 PM, Keith Kaiser <[EMAIL PROTECTED]>
wrote:
I keep hoping that one of these incremental updates w
I keep hoping that one of these incremental updates will fix the
'Configure Timing' dialog box. It still has no labels. Otherwise the
install of 1.9.4 went quickly and works great.
Thanks guys for all you do.
On Aug 15, 2008, at 3:14 PM, Curt, WE7U wrote:
Project: XASTIR (xastir)
Packag
Those look great Gerry, thank you so much.
On Aug 6, 2008, at 10:02 PM, Gerry Creager wrote:
Check ftp://aprs.tamu.edu/pub for the latest Tigers.
Keith Kaiser wrote:
I'm looking for the shp/shx/dbf files for the county that includes
Alpharetta, Georgia, if you have and are willing to
I'm looking for the shp/shx/dbf files for the county that includes
Alpharetta, Georgia, if you have and are willing to share would you
send them to me or maybe just help me find them.
Thanks
___
Xastir mailing list
Xastir@xastir.org
http://lis
I created an object at the coordinates of this years GPSL
(superlaunch.org) but they don't seem to be getting sent out. Have I
set it up incorrect, or are they there and I just don't see them?
The location is Liberty, MO 39.24828, -094.408446
Thanks..
Xastir will be heavily used at GPSL this weekend, see
superlaunch.org for more details. And now that it's working again for
me, I'll be a happy camper too. LOL
On Jul 26, 2008, at 10:56 AM, Jason KG4WSV wrote:
On Sat, Jul 26, 2008 at 10:46 AM, Keith Kaiser <[EMAIL PROTEC
Darn it! It won't stay running again.
On Jul 26, 2008, at 10:56 AM, Jason KG4WSV wrote:
On Sat, Jul 26, 2008 at 10:46 AM, Keith Kaiser <[EMAIL PROTECTED]>
wrote:
MAPS_LABEL_FONT_MEDIUM:-*-*-*-*-*-*-*-*-*-*-*-*-*-*
MAPS_LABEL_FONT_LARGE:?
MAPS
was set to NOT start on load. Xastir is running right
now, but I must admit I'm a bit scared to stop it and reload it... but
here goes.
On Jul 26, 2008, at 10:56 AM, Jason KG4WSV wrote:
On Sat, Jul 26, 2008 at 10:46 AM, Keith Kaiser <[EMAIL PROTECTED]>
wrote:
M
All onstartup settings are now 0.
This is the log using xastir -m &
Regarding fonts; Xastir ran great for me at our last balloon launch
earlier this month, which makes all this even more of a mystery.
Anyway, here is what is in my xastir.cnf file with font in it;
MAPS_LABEL_FONT_TINY:-adobe-
of failed request: 438142
Current serial number in output stream: 438148
On Jul 26, 2008, at 10:12 AM, Curt, WE7U wrote:
On Fri, 25 Jul 2008, Keith Kaiser wrote:
-
Info for national/in101503.shp
4 Columns, 10316 Records in file
DBF
Kaiser wrote:
Attached is my log Curt, if you have a minute would you please take
a look.
Thanks.
On Jul 24, 2008, at 7:32 AM, Curt, WE7U wrote:
On Thu, 24 Jul 2008, Keith Kaiser wrote:
I run Xastir in an X11 window on my MacBook Pro. I used it a
couple of weeks ago to track one of our high
Attached is my log Curt, if you have a minute would you please take a
look.
Thanks.
On Jul 24, 2008, at 7:32 AM, Curt, WE7U wrote:
On Thu, 24 Jul 2008, Keith Kaiser wrote:
I run Xastir in an X11 window on my MacBook Pro. I used it a couple
of weeks ago to track one of our high altitude
I run Xastir in an X11 window on my MacBook Pro. I used it a couple of
weeks ago to track one of our high altitude balloon launches and
everything worked great. I launched it today and the window comes up
and immediately closes. I have no idea where to even begin looking for
a problem, the
Hey some good news for a change.
Not sure why I didn't try is sooner but anyway instead of
cu.USA19H I put it in as /dev/cu.USA19H and now it works. Go
figure.
I upgraded to 1.9.3 also, the only thing here is everytime I exit from
the Interface menu Xastir crashes.
__
t see tnc-startup.d700, I sure don't know why... I tried
putting the full path to it in the interface setup but that didn't
work either.
I know we are running out of ideas here but
On Apr 11, 2008, at 1:29 PM, Curt, WE7U wrote:
On Fri, 11 Apr 2008, Keith Kaiser wrote:
Xas
I reinstalled rotate, and told it to start, and to my astonishment it
started. I'll stop all the others and leave just this one for now and
see how it works.
Thanks for getting me to revisit this.
On Apr 11, 2008, at 4:26 PM, Jason KG4WSV wrote:
On Fri, Apr 11, 2008 at 4:13 PM,
5 AM, Curt, WE7U wrote:
On Fri, 11 Apr 2008, Keith Kaiser wrote:
Sorry about the RTF I had meant to convert it to plain text and I
forgot. I'm
a Mac guy, will dabble in Unix and do my best to stay away from
Windblows as
much as possible, so I understand your comment.
Which means _you
Here is my last build of Xastir, maybe something will leap out at you
guys.
It's a simple txt file...
On Apr 9, 2008, at 10:24 PM, Curt, WE7U wrote:
On Wed, 9 Apr 2008, Keith Kaiser wrote:
This is a weird one guys.
I did ls -lad /dev/lock the result is;
drwxr-xr-t 2 root whee
8, at 10:08 PM, Jason KG4WSV wrote:
On Wed, Apr 9, 2008 at 10:00 PM, Keith Kaiser
<[EMAIL PROTECTED]> wrote:
t I just noticed, its permissions
are set to -rw-r--r--@ 1 root wheel 1439 Apr 9 21:08 tnc-
startup.d700
don't they have to be executable?
no, but they have to be writabl
ssions are set to -rw-r--r--@ 1 root wheel
1439 Apr 9 21:08 tnc-startup.d700
don't they have to be executable?
On Apr 9, 2008, at 9:52 PM, Curt, WE7U wrote:
On Wed, 9 Apr 2008, Keith Kaiser wrote:
No, the lock file is empty.
H! Your on to something now, but what?
If that file
No, the lock file is empty.
H! Your on to something now, but what?
On Apr 9, 2008, at 9:40 PM, Curt, WE7U wrote:
On Wed, 9 Apr 2008, Keith Kaiser wrote:
Done
drwxr-xr-t 2 root wheel 68 Apr 9 21:25 lock
Still a no-go.
Are you getting a file created there that looks
Done
drwxr-xr-t 2 root wheel 68 Apr 9 21:25 lock
Still a no-go.
On Apr 9, 2008, at 9:24 PM, Curt, WE7U wrote:
On Wed, 9 Apr 2008, Keith Kaiser wrote:
I did the chmod, I even did a ./configure then a make and a sudo
make install
then the chmod but it still didn't work.
Apr 9, 2008 at 6:16 PM, Curt, WE7U <[EMAIL PROTECTED]> wrote:
On Wed, 9 Apr 2008, Keith Kaiser wrote:
I connect my laptop (Mac OS X) running Xastir to my D700 using a
Keyspan
serial/USB adapter (cu.USA19H1a2P1.1). I can see the adapter in
terminal when
I do ls /dev so I know I have the correc
A couple of weeks ago I asked this question and thanks to all the
experts out there I got over the problem, but now I have it again.
I connect my laptop (Mac OS X) running Xastir to my D700 using a
Keyspan serial/USB adapter (cu.USA19H1a2P1.1). I can see the adapter
in terminal when I do ls
I use Mac OS X v10.5.2 on a MacBook Pro with 4Gb Ram. I have Xastir
v1.9.2 up and running pretty well with just a couple problems, this is
the first. The attached file is a screen capture of the 'Configure
Timing' menu, please note that it has no labels, I have no way of
knowing which slide
Found the setting, it's not labeled on my implementation should it be?
I like the idea of only having one instance of it running. Thanks.
On Apr 2, 2008, at 12:43 PM, Alex Carver wrote:
--- Keith Kaiser <[EMAIL PROTECTED]> wrote:
WOW!
Not everything seems to work for me but tur
ww.norcalaprs.net/
73, Andreas, N6NU
On Wed, 2008-04-02 at 12:33 -0500, Keith Kaiser wrote:
WOW!
Not everything seems to work for me but turning on PNG Snapshot and
being able to see it as a png is working great. Now for the big
question. Why do I want to do this? I'm curious why someone w
WOW!
Not everything seems to work for me but turning on PNG Snapshot and
being able to see it as a png is working great. Now for the big
question. Why do I want to do this? I'm curious why someone would want
to put on the web a snapshot of their Xastir screen. I'm not being a
smart-ass I really do
he list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Xastir digest..."
Today's Topics:
1. Map Directory (Tyler Parsons)
2. Findu Trail (Keith Kaiser)
3. Re: Map Directory (Tate)
4. Re: Findu Trail (
I have Xastir 1.9.2 loaded and running well on my MacBook Pro now
thanks to several of you and your tips to getting the KeySpan working.
But there are still a couple of outstanding issues I would like to
throw out for discussion.
The first is when I'm trying to retrieve a FindU trail, it alwa
On my old iBook I connected to my D700 through the USB port using /dev/
cu.USA19H191P1.1, but this is not working on my new MacBook Pro. Does
anyone know what I should be using or how to determine it. I'm still
using the same Keyspan USB to serial converter that I did before so
I'm pretty su
I just loaded Xastir on my new MacBook Pro, nice, real nice... I love
the speed.
Anyway, when I'm at home I usually just use Online maps, but despite
the fact that they are all in the appropriate folder they are not
showing up in the Map Chooser Properties list. The folder (Online for
exa
The install on Leopard went well, but when I try to launch Xastir all I get
is the window and the menus, clicking on any menu does nothing. Any ideas?
I'd swear I've seen this before but I can't find any notes on it.
--
YIS/YIV/73's!
Keith D Kaiser
nearspaceventures.com
bsaroundtable.com
kaiserkl
When I loaded OS X 10.5 (Leopard), I did a clean install which means my copy
of Xastir has to be reinstalled. But when I got to the bootstrap below is
what I got, can anyway decipher this for me and tell me what I did wrong?
Last login: Tue Oct 30 08:14:04 on ttys000
Welcome to Darwin!
keith-kais
Is there a way to pre-assign a series of tactical calls for a group effort
(bike ride, etc.)?
--
YIS/YIV/73's!
Keith D Kaiser
nearspaceventures.com
bsaroundtable.com
kaiserklan.com
___
Xastir mailing list
Xastir@xastir.org
http://lists.xastir.org/cgi-bi
Has anyone successfully used the output of a AvMap G4T and their D700 to run
Xastir on a Mac? Needless to say I sure would like to know how. I usually
use a little Radio Shack GPS connected to the D700 and it works great but I
recently got suckered into buying this AvMap and since its there I sure
I did the following in Terminal;
KeithsMini:~ keithkaiser$ cd /Work/
KeithsMini:/Work keithkaiser$ wget
http://www.wx9grb.org/xastir/downloads/xastir-1.8.4.tar.gz
KeithsMini:/Work keithkaiser$ tar -zxvf xastir-1.8.4.tar.gz
KeithsMini:/Work keithkaiser$ cd xastir-1.8.4
KeithsMini:/Work/xastir-1.8.
84 matches
Mail list logo
