Hello
I am trying to create the amallest possible X for my X86 linuxbox.
Building X as is I get about 100MB in X11R6 directory
Building X as TinyX I get about 65MB in X11R6 directory
I wonder if is possible to get a minimal X in about 1-2 MB ?
TIA
___
XF
Hi,
I want to install the sis video driver on my MSI Hermes 650 barebone, in
order to have Xvideo support. The computer is connected to my TV and is
used as frontend to mythTV. The RedHat installer set the vesa driver in
the XFree86 configuration file.
As far as I can see, the sis driver does
Hi,
HorizSync 30-50
VertRefresh 47-110
The VertRefresh is not really realistic. Your DDC info shows you can do
about 75 Hz
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): [EMAIL PROTECTED] <---
(II) S3VIRGE(0): [EMAIL PROTECTED] <---
(II) S3VIRGE(0): [EMAIL PROTECTE
Cristian Campeanu writes:
> Hi there,
>
> My name is Cristian Campeanu and I'm from Romania.
> I own a Likom L - 403 monitor which a broke 3 times already by changing
> resolution (the usual Ctrl+Alt+-) and a S3 Trio3D. I'm running RedHat Linux
> 7.2 with the 2.4.7-10 kernel and XFree 4.1.
Hi,
I've got a Shuttle SB51G with the optional CV21 TV Out module.
http://www.shuttle.com/new/product/barebone/specs_b.asp?B_id=8
http://www.shuttle.com/new/product/barebone/specs_a.asp?A_id=14
Generally a linux user, normally a Debian user, I'm using Knoppix
temporarily as it comes with XFree86
Hello,
I have a logitech marble mouse, this is a strange trackball that has the
ball at center and four buttons, two "classic standard buttons" and the
other two are to simulate the wheel and go up and down on mozilla.
The mouse works very well but the third and four buttons won't work they
are
Hi All,
I've just installed Redhat 9.0 on my Compaq Evo 610c laptop.
The Xserver wotk fine with the laptop panel and gives me
a nice 1400x1050 resolution. However when I dock the laptop and
try to drive an external CRT monitor I get problems.
The attached XF86Config file will give me 1400x1050 reso
On 2003.06.13 06:50, Gavin McCullagh wrote:
Hi,
I've got a Shuttle SB51G with the optional CV21 TV Out module.
http://www.shuttle.com/new/product/barebone/specs_b.asp?B_id=8
http://www.shuttle.com/new/product/barebone/specs_a.asp?A_id=14
Generally a linux user, normally a Debian user, I'm using K
On Fri, 13 Jun 2003, Emmanuel wrote:
> On 2003.06.13 06:50, Gavin McCullagh wrote:
> >
> >I've got a Shuttle SB51G with the optional CV21 TV Out module.
> >
> >With TV, the initial boot sequence gives a bunch of resolution options
> >or "scan" to probe. Several options work but they all amount to
http://www.xfree86.org/current/XListInputDevices.3.html specifies that the name field
of the XDedeviceInfo data structure is a value in XI.h.
In practice, this is not the case. Is there an updated specification of what the field
value is?
Padraig
___
God, what I am tired of saying this: I need to see your log.
Furthermore, try the latest driver from - as the log mentiones clearly -
www.winischhofer.net/
Thomas
Ralf Haller wrote:
Hi,
I want to install the sis video driver on my MSI Hermes 650 barebone, in
order to have Xvideo support. Th
On Thu, Jun 12, 2003 at 09:55:51AM +1200, Miles Roper wrote:
>Hi David,
>
>Thanks for your response, been looking at the wrong mailing list, the one at
>mail-archive.com doesn't seem to be updated regularly.
>
>Do you have an idea to get me started at how to look at what modules use the
>most memor
On Thu, Jun 12, 2003 at 09:10:51PM +0200, Wolfgang Jeltsch wrote:
>On Thursday, 2003-06-12, 20:27, Mike A. Harris wrote:
>> On Thu, 12 Jun 2003, Wolfgang Jeltsch wrote:
>> > why isn't there any information available on the XFree86 website and in
>> > the manpages about activating DPMS under XFree86
On Thursday, June 12, 2003, at 09:58 PM, Kelley Hilborn wrote:
When trying to configure X with xf86cfg, the screen flickers, looks
like
it's
about to go to a GUI, and then just shuts down. Logs me out of my
session.
From your XFree86.0.log:
(EE) I810(0): AGP GART support is not available. Mak
I configured my dual head setup on my laptop using an SiS 650 chipset.
However, since the VGA is the primary, it seems that I either have to :
- have the VGA monitor on at boot time
- set ForceCRT1
The first case is obviously not very practical for a laptop since the
only monitor I am sure to h
Hi,
My name is Paul Richard. I have installed RedHat Linux 7.3 on a HP NetServer Plus. It
has a Trident TVGA 9000 chipset which is found in the drivers list, but when I try to
start X it says "no screens found". Any advice would be greatly appreciated.
Sincerely,
Paul V. Richard
TWNEOR Region I
Philippe Moutarlier wrote:
I configured my dual head setup on my laptop using an SiS 650 chipset.
However, since the VGA is the primary, it seems that I either have to :
- have the VGA monitor on at boot time
- set ForceCRT1
The first case is obviously not very practical for a laptop since the
o
How do tell Xfree which to use when using startx, for example (sorry
if this is obvious :-)
Thanks
On Fri, 2003-06-13 at 11:58, Thomas Winischhofer wrote:
> Philippe Moutarlier wrote:
> > I configured my dual head setup on my laptop using an SiS 650 chipset.
> > However, since the VGA is the prim
I recently upgraded my computer (from FreeBSD 3.1 to 5.1), and now my monitor
will not go into "suspend" mode; it stays in "standby".
I have this in my .xsession:
xset s 300 s blank dpms 1200 3600
So after 20 minutes, the monitor should go into "standby" mode, then after an
hour int
Philippe Moutarlier wrote:
How do tell Xfree which to use when using startx, for example (sorry
if this is obvious :-)
man startx
Thomas
Thanks
On Fri, 2003-06-13 at 11:58, Thomas Winischhofer wrote:
Philippe Moutarlier wrote:
I configured my dual head setup on my laptop using an SiS 650 chips
Hi ,
I got a brand new lap top and trying to use the XFree86 under Windows VMWare
environment.
The message is attached below for more details.
Hope to find a solution soon. cheers. Gaja.
_
Help STOP SPAM with the new MSN 8 and get 2
Another option that worked for a radeon user I was helping, was to set
up the video chip in mergedfb mode initally with crt1 forced on or with
the monitor attached. then use xrandr to resize the frame buffer on
the fly. so if you have two 1024x768 heads set up the initial
framebuffer as 2048x768
On Fri, 13 Jun 2003, Gavin McCullagh wrote:
> I've got a Shuttle SB51G with the optional CV21 TV Out module.
>
> Generally a linux user, normally a Debian user, I'm using Knoppix
> temporarily as it comes with XFree86 4.3 and I've not had the chance (or
> rather the bandwidth) to get organized wi
Hey there
You first need to install the VMWare Tools. Here's what you do
Logon as root and select Install VMWare Tools from the VMWare File. Then
mount the cdrom (mount -t iso9660 /dev/cdrom /mnt/cdrom) and in it there
is a .tar.gz package. Copy it to the hard drive, extract it and follow
the ins
I am running redhat 8.0 on a Pentium 4 (533) as a file server to a network of primarily MacIntosh computers. This morning we lost access to the server. I rebooted it at which point I received the following message:
"I coud not start the X server (your graphical environment) due to some internal
some pci info for the support team!
im using a ati 9700 (a little modified) in my dell dimension 4500 system
pci bus 0x cardnum 0x00 function 0x00: vendor 0x8086 device 0x2560
Intel Device unknown
CardVendor 0x1028 card 0x0142 (Card unknown)
STATUS0x2090 COMMAND 0x0106
CLASS
On Fri, 13 Jun 2003, Chris Rankin wrote:
> Hi,
>
> I'm experiencing occasional X-server crashes with 4.3, running on my
> Linux 2.4.20-SMP machine. (The crashes also happen with 2.4.21, BTW.)
> This machine has 1 GB RAM, dual 933 PIII-Coppermine and a Matrox G400
> card. I am also using the curre
Hi !!
I have a intel 845 glva motherboard running RedHat linux 8. Due to poor
graphical resolution, I recently downloaded te entire 4.3 version of
Xwindows (abt 70 mb) and installed it. Unfortunately, after installation (it
said the installation completed successfully), when i rebooted, i did g
Alex Deucher wrote:
Another option that worked for a radeon user I was helping, was to set
up the video chip in mergedfb mode initally with crt1 forced on or with
the monitor attached. then use xrandr to resize the frame buffer on
the fly. so if you have two 1024x768 heads set up the initial
fram
On Thu, 12 Jun 2003, Wolfgang Jeltsch wrote:
>> > why isn't there any information available on the XFree86 website and in
>> > the manpages about activating DPMS under XFree86 3.3.6. Option "DPMS" in
>> > the Monitor section doesn't work.
>>
>> Whatever the reason might be, XFree86 3.3.6 is _long_
On Thu, 12 Jun 2003, Alex Deucher wrote:
>Date: Thu, 12 Jun 2003 13:49:43 -0700 (PDT)
>From: Alex Deucher <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED], [EMAIL PROTECTED]
>Reply-To: [EMAIL PROTECTED]
>Content-Type: text/plain; charset=us-ascii
>Subject: Radeon 9800 AGP driver
>
>The xfree86 4.3.0 an
Hi, I would really appreciate it if someone can help me.
I'm using XFree86, version 4.3.0.
My graphics card is an S3 Pro Savage DDR
My monitor is a Philips 107S
I could run the X server with a resolution of 640x480, with 256 colors,
but anything higher than that gives me either a blank screen or
Hi All
It seems to appear that the Mandrake 9.1 default install uses software
acceleration. Can anyone explain briefly what I need to do to get
hardware acceleration running..
cheers
Allan
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Or
I am having problems configuring XFree86 on a NetBSD/i386 system.
When starting X, I get a black display and the monitor's LED blinks
green (Ctrl+Alt+Backspace works to kill the X server). The system
details are:
NetBSD/i386 1.6.1 (GENERIC)
XFree86 4.3.0
Samsung SyncMaster 172T TFT display
34 matches
Mail list logo
