Al
At 10:18 PM 2/3/2003, you wrote:
Hey, Al....don't you remember? You and I were in the same certification class, along with Dave Haude. We're all certified!Looks to me like our friend Mr. Talamonti raided the PCS locator data base.... Royce -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Al Taylor Sent: Monday, February 03, 2003 8:48 PM To: [EMAIL PROTECTED] Subject: Re: ShopTalk: ASD Article In PubLinks magazine Well Well Well!!! I took a look at the below listed web site. Thought I would check on who was the closest of his dealers to me so I could inquire about the product, since he claims all of his dealers are qualified. Guess who my closest dealer is? ME!!! Well send me your shafts and for 20$ plus shipping I will whammy your equipment. Don't ask me about the secret method we use. If I told ya, I'd have ta kill ya. ;-) Al At 06:38 PM 2/3/2003, you wrote: >Bill ask that someone post this on Shoptalk > >Bru >I just read the article by Phil Talamonti of ASD that was published in >PubLinks magazine. It also appears on his web site www.advancedshaft.com >. The prelude to the article says "In the first of a series of articles >on shafts and shaft technology, Phil Talamonti, the President and CEO of >Advanced Shaft Dynamics reveals a hidden secret". > >I think the secret is that he doesn't know very much about what clubmakers >do to align shafts in golf clubs. Obviously, from the way he degrades the >technology of Dick Weiss and the charts produced when a shaft is PUREd, he >does know something about the PURE process and doesn't think much of it. > >I guess its natural for the 'new kid on the block' to come forward as the >ultimate guru of knowledge on the subject of shaft alignment - the fact >that he downgrades all other methods is either lack of knowledge or just >plain marketing bullshit. > >He also states that he has a network of over 1000 authorized dealers >across the country and "we make sure our dealers are qualified...." Sure >works fast for the new kid on the block! I should think that to seriously >'qualify' 1000 dealers he must have spent several months to a year - >unless qualification is 'do you have any money' and 'do you know which end >of the shaft the head goes on'? (for those who don't know, its the small >end. Perhaps you too can become a dealer!) > >Anyway, please read the article on the ASD web site and see for yourself >if the "technology" is believable. I did and I don't believe its worth >$15 - $20 a shaft - plus labor and shipping (of course you pay the shipping). > >By the way, early analysis says that NBP is down the target line on the >ASD Peaked shafts. How new is that? > >I would appreciate it if someone would post this over to Shoptalk, since >I'm not a member there. > >Bill