Do I understand you correctly? You run your system with cones? I have a HVAC system. I do not allow it to cone. I add 2 ounces of 10ppm starter per gallon and do not let it get close enough to cone... rather i keep the electrode about 1/8 to 1/4 inch above the water. this keeps a small arc present. a cone reaches above the water surface and prevents the arc.
am i misunderstanding what you are speaking of? or are you referring only to starting the process in regards to the various heights of your electrode placement depending upon the water used? j...@writeme.com -----Original Message----- From: Charles King <ck...@global2000.net> To: silver-list@eskimo.com <silver-list@eskimo.com> Date: Thursday, September 16, 1999 8:59 PM Subject: Re: CS>High Concentration HVAC CS--additional comments >On Thu, 16 Sep 1999 21:08:01 EDT, roesil...@aol.com wrote: > >>There is >>only one brand that consistently allows me to pull cones about 3/8" to 1/2" >>from the surface. (Crystal Springs) > >The closer I get the electrode to the water surface, the higher the >cone. Typically 1/16 to 1/8" > Chuck > > > > >-- > > -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com List maintainer: Mike Devour <mdev...@id.net>
