Perhaps if you omitted the sponge, but made the connecting tube reeeeally narrow, that the electrolysis would outpace the mixing of the water, and some distinct product could be produced with silver electrodes?
On Mon, May 14, 2012 at 9:15 PM, David AuBuchon <aubuchon.da...@gmail.com>wrote: > Excellent find Renee. Thanks for that info. Yes, that is certainly a > reasonable markup. I think he probably deserves it. > > On Mon, May 14, 2012 at 9:06 PM, Renee <gaiac...@gmail.com> wrote: > >> You always have to have something in the middle to keep the flow of >> water ‘out’ of the other container. Some use sponges, some use pure cotton >> wadded up, some use chamois cloth. Since one container is acid and one >> alkaline water, if they were to flow across and mix freely you wouldn’t >> have acid or alkaline—it may easily be neutral. But you do need something >> that allows the current to flow across—hence the filter in between.**** >> >> ** ** >> >> There’s some good videos on making your own alkalizer, one place where >> you can buy a nice looking set up for around $150 but all of these suggest >> stainless steel or titanium. Titanium is actually better, but according to >> this site**** >> >> >> http://www.freshandalive.com/fresh_and_alive_content/products-ionizer-fna-2g.htm >> you should really get platinum coated titanium, which can be hard to >> source. He shows a vid of ‘plain’ titanium being etched away by this >> electric process.**** >> >> ** ** >> >> The image he shows of the titanium in the vid is a long half-pipe looking >> piece, yet the close up on his actually for-sale machine looks like a >> little one inch piece. I wrote him asking about this discrepancy and he >> said the long pipe was to show how much the titanium got eaten away along >> the edges, and that the coated small piece will NEVER wear out—because I >> had asked him about replacement times. **** >> >> ** ** >> >> So it would seem to me that for the money from his site you’d actually be >> getting the best device, plus I’m thinking you could use these coated >> titanium pieces and the electric plug for making a foot bath device. Yeah, >> you’d have to clean the electrodes VERY good, but—since the coated >> electrodes never wear out you’d be getting 2 devices for pretty much one >> price. For the foot baths all you’d need to buy would be 2 plastic shoe >> boxes. Seems like a good deal. **** >> >> ** ** >> >> Supposedly the cost for his unit is because of the coated titanium. I >> think this may be true because as I searched around for a supply for the >> coated titanium all I could find was 1 inch pieces (which is what his looks >> like) at $65 each—so that’s 130 just in the titanium. So less than a >> hundred for the containers, the plug in and the cotton wad filter. You >> could probably find these things for cheaper, but if someone didn’t want to >> mess gathering parts from all over his is the best deal out there. The >> $150 one uses titanium, if I remember right, but it’s not coated and >> eventually you’ll have to replace the electrodes. **** >> >> ** ** >> >> Samala,**** >> >> Renee**** >> >> ** ** >> >> *From:* David AuBuchon [mailto:aubuchon.da...@gmail.com] >> >> **** >> >> Do DIY alkalizers like this really work? >> http://www.instructables.com/id/Water-Alkalizer-or-Ioniser-for-5/?ALLSTEPS >> >> Sounds like a big money saver over commerical products. Assuming they >> have value to begin with. >> >> >> **** >> > >
