I am experimenting with 120vac with a bridge rectifier. I have a resistance decade box in series with the raw DC output of the bridge. I monitor the current with a DVM.
I've been using a quart measuring cup with distilled water. Electrodes are about 6" apart. I keep the current around 1 to 1.5 ma. I let it run over night. The product is light golden and darkens within a day or two. Don't know what it is, but it sure helps. My electrodes are made up of 999 silver coin shape. I tacked 2 of them together with an oxy-acet torch. (no filler, just silver) I believe the larger surface area is beneficial. I've tried higher currents and shorter durations. The product becomes golden quicker. I haven't popped the cork on any of this though, to see how I respond to it. Jeff (The sacrificial human experiment) 2001 TV VCR wrote: > I have not seen anyone discuss the best method for > making high quality CS. One of the manufacturers of > high voltage (10,000 volts AC) CS generators claims > that the low voltage (30 volts DC) systems are worthless. > > I have been using 30VDC first using thin silver wires and > a 16 oz. jar and now a gallon jar with a much larger silver > electrode. Without current limiting most of the silver ends > up on the cathode (negative electrode). Some of you > suggested limiting the current to a milliamp or so and > going for quite a few hours. > > Can some of you offer more opinions and suggestions > along these lines. Let us know what type of equipment > and voltages/currents you are working with if getting good > results. It is so important that all of us end up with CS that > is effective and safe to use. > > If any of you have questions about electrical or electronic > circuits involving you CS equipment I can help. > > Bil Green > 2001 TV VCR > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > > List maintainer: Mike Devour <[email protected]>

