Hi Connie, Yep, that's one of them. Most of the inquiries are about unidentified brands.
Trem ----- Original Message ----- From: "Connie" <wufn...@stargate.net> To: <silver-list@eskimo.com> Sent: Wednesday, March 20, 2002 4:24 PM Subject: Re: CS>Re: 100-500 PPM CS and how it's made > The 500ppm stuff that Ole Bob tested, and sent on for further testing is the > stuff peddled by HHA....are these the same products others are asking you > about? > Just curious... > Connie > > > > From: "Trem" <t...@silvergen.com> > > Reply-To: silver-list@eskimo.com > > Date: Wed, 20 Mar 2002 08:02:56 -0800 > > To: <silver-list@eskimo.com> > > Subject: Re: CS>Re: 100-500 PPM CS and how it's made > > Resent-From: silver-list@eskimo.com > > Resent-Date: Wed, 20 Mar 2002 08:41:39 -0800 > > > > Hi Reid and List members, > > > > The reason I asked the original question is that I have had several people > > ask me about CS touted as being 500 PPM and they wanted to know what I > > thought about it. In all cases I was told it was very deep yellow to brown > > colored. Since I don't have a clue as to how it's made, I'm hesitant to say > > anything about it except that it must be really agglomerated to be that > > color and that it probably doesn't contain many ions. Could be way off in > > my reasoning so that's why the question. Does anyone know the process used > > to make the 500 PPM stuff. I call it stuff because I'm not sure what it is. > > And I'm not asking for the process in order to try making it. That's not a > > consideration. I wouldn't ingest it...would rather stick with low PPM clear > > CS. > > > > Trem > > > > > > ----- Original Message ----- > > From: "Reid Harvey" <ceram...@bol-online.com> > > To: "silver list" <silver-list@eskimo.com> > > Sent: Tuesday, March 19, 2002 8:29 PM > > Subject: CS>Re: 100-500 PPM CS and how it's made > > > > > >> Hi Trem, > >> I'm curious why you say that electrolysis can't make CS as strong as 100 > >> to 500ppm, unless perhaps you are speaking of the more conventional > >> methodologies. I make CS that is ~170ppm, using a generator I acquired > >> from Educate-Yourself.org, and though I have not had this tested I feel > >> the ppm is the amount advertised. I'm told this generator will make CS > >> upto about 1100ppm or more, simply requiring additional time. > >> > >> The container used is a 2 liter Erlenmeyer flask, operated in a double > >> boiler, which I monitor to see that the boiling point is never > >> exceeded. It's necessary to keep the temperature somewhat under 212oF, > >> between about 200 and 208, so there's a thermometer inserted in the > >> rubber cork at the top. I'm also told that the rate of ionic silver > >> reaction is doubled for every additional 10oF. Also I use polarity > >> switching, doing this every one minute, in order to prevent current > >> runaway. Three or four hours at temperature and the CS goes from yellow > >> to orange to deep amber, always tranparent, but at the end so dark that > >> what one sees is a kind of gray, reflected color. But in diluting you > >> get back to a clear yellow. > >> > >> I have variously seen here that a number of CS enthusiasts insist the > >> ions will agglomerate and precipitate if something like 50ppm is > >> exceeded, but I am guessing that this is not what happens. I believe > >> there is actually a current runaway, or perhaps precipitation due to an > >> electromagnetic field. It seems that as ppm increases there is more and > >> more likelihood of instability, for various reasons. The folks who made > >> my generator advise the concentrated CS is best kept in a Farraday cage > >> in order to prevent instability due to electromagnetic fields. Of > >> course, the producers of the Mexican CS, Microdyn, solve the same > >> problem by using the protein stabilizer. > >> > >> I hope this information is helpful. > >> Reid > >> > >> Trem said: > >> Hi List, > >> > >> There's a question that's been nagging me for several years and I hope > >> someone can help me figure it out. When I see 100 to 500 PPM CS I > >> always > >> wonder what process was used to make it. > >> > >> Since I know that electrolysis can't make it that strong it seems to me > >> it > >> has been made through chemical means. If it is made chemically and > >> protein > >> binders such as gelatin are used to stabilize it, what is the process? > >> Is > >> the silver dissolved in an acid and then a precipitant added to form > >> particles or is there some other method? > >> > >> And if it is done using an acid can anyone tell me the process? > >> > >> The stuff is always deep brown in color which makes me think it's no > >> good > >> because of agglomeration, but it might actually have that much silver in > >> it. > >> I know Ole Bob has tested some of it and as I recall he found most of > >> them > >> were not at the PPM touted but it seems he did find some that were in > >> the > >> hundreds of PPM. Bob, are you there? Can you shed any light for me? > >> > >> Can anyone? > >> > >> Trem > >> > >> > >> > >> -- > >> The silver-list is a moderated forum for discussion of colloidal silver. > >> > >> To join or quit silver-list or silver-digest send an e-mail message to: > >> silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com > >> with the word subscribe or unsubscribe in the SUBJECT line. > >> > >> To post, address your message to: silver-list@eskimo.com > >> Silver-list archive: http://escribe.com/health/thesilverlist/index.html > >> List maintainer: Mike Devour <mdev...@eskimo.com> > >> > >> > >> > > > > > > >
