Yes all of my three intranet subnets, 192.168.2.0/24, 192.168.8.0/24 and 192.168.10.0/24, were already set in the "Intranet Calling".
-----Original Message----- From: Robert Joly [mailto:rj...@nortel.com] Sent: Monday, July 20, 2009 9:57 PM To: jun,wen; sipx-users@list.sipfoundry.org Subject: RE: [sipx-users] Remote worker cannot call to second intranet subnets Please make sure that your 192.168.8.0/24 and 192.168.10.0/24 appear in your intranet subnet list under System->Intranet Calling. The rule of thumb here is that the Intranet Subnets section should contain all the subnets that describe your intranet. > > Hi, I have three intranet subnets by a central site with sipx server > (192.168.2.0/24 ) and two of branch sites (192.168.8.0/24 and > 192.168.10.0/24) with VPN tunnel interconnections of hub-and-spoke. > > The sip phones inside these three intranet subnets can make call to > each other without problem, and the remote worker also can make call > to the sip phone inside the subnet of sipx server. > > Whereas, when the remote worker calls to the sip phone inside the > second/third intranets, the called party rings but has only one-way > audio from remote work to called party. > > Is there anything related to the sipXbridge settings ? > > Regards, > > Jun > > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org List > Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/