I have tested with the polycom kirk wireless server 300 and a kirk 5020 handset and it works really well. They can even be monitored by the BLF service and can perform transfers.
Sent from my Samsung Moment™ only on the Now Network™ ----- Original Message ----- From:"Matthew Kitchin (public/usenet)" <mkitchin.pub...@gmail.com> To:"sipx-users" <sipx-users@list.sipfoundry.org> Sent:9/8/2010 2:48 PM Subject:[sipx-users] Cordless phone question... again It has been asked a few times, but most of the recent questions seem to be related to trouble with a particular kind. Can anyone tell me about a cordless/wireless setup that has worked well? It is a new system that will be 4.2.1. Handsets will be Polycom 450 and 550. The Polycoms will use parking extensively, but that isn't a huge requirement on the cordless, as long as it can have calls transferred to it. The plan is for1 cordless phone only. Their is a Cisco Aironet WAP at the site, and we would definitely be interested in using that if it is recommended. Phones are on their own VLAN and we could easily do a dedicated SSID for a cordless phone as well. I would definitely prefer not using an ATA and analog phone. I'm not looking to roll out anything in mass. Just 1 or 2 here and there at different sites. Anyone have a recommendation for a good cordless/wireless setup? Thanks as always, Matthew _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/