That is what I did. I have one line assigned to the phone and the registration settings as below.

Stiles


On 04/12/2012 11:54 AM, Tony Graziano wrote:
You register the SAME LINE on both line appearances and set the limit to "1" for each.

On Thu, Apr 12, 2012 at 11:51 AM, Stiles Watson <wat...@datatek-net.com <mailto:wat...@datatek-net.com>> wrote:

    According to the sipX book (p 133):

    "Most multiple line IP hardware phones allow multiple calls to a
    single
    line. This
    can be quite confusing for the average phone user and difficult to
    deal
    with at an
    answering position. To remedy this problem it is easier for the
    user to
    have multiple
    appearances of the same line on their telephone. Each successive call
    will ring on the
    next line appearance."

    I am using the recommended setup on the Polycom 335 phones, but the
    behaviour is not as indicated. When the second call comes in, it does
    not ring on the successive line, but goes straight to v-mail. I'm
    using
    sipX 4.4.

    In my phone group, under the Registration section, I have lineKeys set
    to 2 (the 335 has two line keys) and I have callsPerLineKey set to 1.
    After sending the profiles to the phones, they show the correct ext on
    each line. I can make two outgoing calls, but I can only receive one.

    I have also tried assigning the same ext twice to the phone. This
    again
    results in the same ext appearing on each line key as desired, but
    when
    the second call comes in, it does not ring the second line, but rings
    the first line. If I answer an incoming call while on another
    call, the
    first call goes to hold (this is an assumption because I hear the MOH
    music), but I do not see how to put the second call on hold and
    retrieve
    the first call. If I hang up the second call without picking up the
    first, they both get disconnected.

    I'd rather have the solution indicated in the book.

    Stiles
    _______________________________________________
    sipx-users mailing list
    sipx-users@list.sipfoundry.org <mailto:sipx-users@list.sipfoundry.org>
    List Archive: http://list.sipfoundry.org/archive/sipx-users/




--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net <mailto:tgrazi...@voice.myitdepartment.net>
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net <mailto:helpd...@voice.myitdepartment.net>

Helpdesk Customers: http://myhelp.myitdepartment.net <http://myhelp.myitdepartment.net>
Blog: http://blog.myitdepartment.net


_______________________________________________
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

_______________________________________________
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to