Odd... I'll have to keep a watch for this.. I haven't seen it
happen yet.. Before 0.01.04, I seen nothing but problems. Constant reboots
of the AB's to keep their speed up, and connected to the AP. No such
problems with the new firmware..
Scott
On Wed, 4 Jun 2003, phantam wrote:
> True, ye I have noticed that the AB's still freeze occasionally or loose
> association according to clients they have to power cycle every so often and
> then it works great.
>
> Chris
>
> -----Original Message-----
> From: Scott Pilz [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, June 04, 2003 9:31 AM
> To: '[EMAIL PROTECTED]'
>
>
> Chris, what is freezing ?
>
> We've had about the same luck here with V:0.01.04.. I think the
> reason people are having problems with 0.01.04 is primarily due to the
> fact they are setup and used to using a transparent bridge. I actually
> LIKE the changes in 0.01.04.. Less work when a customer decides to swap a
> NIC/WiFi card.
>
> Scott
>
>
> On Tue, 3 Jun 2003, phantam wrote:
>
> > What problems for gods sake I have 120 airBridges deployed and guess what?
> > All with 1.5 firmware and it's working great , I can monitor have no
> > problems except occasional freezing? Maybe this will be fixed better in
> next
> > version. Even the power issue that everyone has been having problems with
> > seems to be very seldomely apparent in my installs. Perhaps the problem
> > isn't entirely Smartbridges fault.
> >
> > Chris
> >
> > -----Original Message-----
> > From: Scott Damron [mailto:[EMAIL PROTECTED]
> > Sent: Tuesday, June 03, 2003 7:53 PM
> > To: [EMAIL PROTECTED]
> >
> > Yes,
> >
> > It don't work!!! I have tried it on 3 of the last "Indoor" airbridges
> > we bought, after many problems with the newer firmware, and it just
> > don't work!!!
> >
> > Scott
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Jack Berridge
> > Sent: Tuesday, June 03, 2003 11:57 AM
> > To: [EMAIL PROTECTED]
> > Subject: [smartBridges] Firmware Downgrade
> >
> >
> > Because of the lack of stability with current Smartbridges AirBridge
> > Outdoor Firmware, we are going to begin downgrading our firmware to the
> > last stable release. Others have already done this. I'm curious if
> > there
> > are any quirks discovered while downgrading your firmware from the
> > current
> > rev to the last stable rev? Where you able to successfully do this
> > "remotely" (although remote, we will still be on the same LAN broadcast
> > domain segment --- just not at each customers site)?
> >
> > Also, did you downgrade the APPO units as well or just the ABO units?
> > We
> > are thinking we only need to downgrade the ABO units but we may be
> > incorrect with this assumption.
> >
> > Any insight on the process(es) used by others to allow you to
> > successfully
> > downgrade your firmware would be greatly appreciated.
> >
> > Thanks much.
> >
> >
> >
> > Jack
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
> > the body type unsubscribe smartBridges)
> > Archives: http://198.63.203.6
> >
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> > smartBridges)
> > Archives: http://198.63.203.6
> >
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
>
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6
