Ye I agree new power seems to fix many problems I also have set ip's for my SB's connecting to APPO's some have the Mac set to 0 some have it still set cause I forgot to erase it. But who knows, as for times it freezes I don't know I havcent really asked my clients once I tell em "reset it and it should fix the problem" they never seem to call back hehe they just do it themselves LOL.
Chris
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 04, 2003 4:16 PM
To: [EMAIL PROTECTED]
Yes, locked to APPO (ESSID set) with MAC 0000000000. It seems to be
about once a week for all customers. Dirty power perhaps? Lately that
seems to have been my answer to a lot of things. Maybe the smartBridges
need a better voltage regulator on board.
Cheers,
Paul
-----
Paul C. Murdock [EMAIL PROTECTED]
mobile/801.864.1024 - fax/801.446.0130
www.paulmurdock.com - for more info
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]] On Behalf Of Scott Pilz
>Sent: Wednesday, June 04, 2003 8:53 AM
>To: [EMAIL PROTECTED]
>Subject: RE: [smartBridges] Firmware Downgrade
>
>
>
> Are you locked to BSSID/SSID, what AP's do you guys use?
>
> And, how often is this happening, once a month, twice a
>month (?)
>
>
> Scott
>
>On Wed, 4 Jun 2003 [EMAIL PROTECTED] wrote:
>
>> Yes.. Exactly same problems I have. with NEWEST firmware.
>>
>> cheers,
>> Paul
>>
>>
>>
>> -----
>> Paul C. Murdock [EMAIL PROTECTED]
>> mobile/801.864.1024 - fax/801.446.0130
>> www.paulmurdock.com - for more info
>>
>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]] On Behalf Of phantam
>> Sent: Wednesday, June 04, 2003 8:36 AM
>> To: '[EMAIL PROTECTED]'
>> Subject: RE: [smartBridges] Firmware Downgrade
>>
>>
>>
>> True, ye I have noticed that the AB's still freeze occasionally or
>> loose association according to clients they have to power
>cycle every
>> so often and then it works great.
>>
>> Chris
>>
>> -----Original Message-----
>> From: Scott Pilz [mailto:[EMAIL PROTECTED]]
>> Sent: Wednesday, June 04, 2003 9:31 AM
>> To: '[EMAIL PROTECTED]'
>>
>>
>> Chris, what is freezing ?
>>
>> We've had about the same luck here with V:0.01.04.. I think
>> the reason people are having problems with 0.01.04 is
>primarily due to
>> the fact they are setup and used to using a transparent bridge. I
>> actually LIKE the changes in 0.01.04.. Less work when a customer
>> decides to swap a NIC/WiFi card.
>>
>> Scott
>>
>>
>> On Tue, 3 Jun 2003, phantam wrote:
>>
>> > What problems for gods sake I have 120 airBridges deployed
>and guess
>> what?
>> > All with 1.5 firmware and it's working great , I can
>monitor have no
>> > problems except occasional freezing? Maybe this will be
>fixed better
>> in next
>> > version. Even the power issue that everyone has been
>having problems
>> with
>> > seems to be very seldomely apparent in my installs. Perhaps the
>> problem
>> > isn't entirely Smartbridges fault.
>> >
>> > Chris
>> >
>> > -----Original Message-----
>> > From: Scott Damron [mailto:[EMAIL PROTECTED]]
>> > Sent: Tuesday, June 03, 2003 7:53 PM
>> > To: [EMAIL PROTECTED]
>> >
>> > Yes,
>> >
>> > It don't work!!! I have tried it on 3 of the last "Indoor"
>> > airbridges
>>
>> > we bought, after many problems with the newer firmware,
>and it just
>> > don't work!!!
>> >
>> > Scott
>> >
>> > -----Original Message-----
>> > From: [EMAIL PROTECTED]
>> > [mailto:[EMAIL PROTECTED]] On Behalf Of Jack Berridge
>> > Sent: Tuesday, June 03, 2003 11:57 AM
>> > To: [EMAIL PROTECTED]
>> > Subject: [smartBridges] Firmware Downgrade
>> >
>> >
>> > Because of the lack of stability with current Smartbridges
>AirBridge
>> > Outdoor Firmware, we are going to begin downgrading our firmware to
>> the
>> > last stable release. Others have already done this. I'm
>curious if
>> > there are any quirks discovered while downgrading your
>firmware from
>> > the current
>> > rev to the last stable rev? Where you able to successfully do this
>> > "remotely" (although remote, we will still be on the same LAN
>> broadcast
>> > domain segment --- just not at each customers site)?
>> >
>> > Also, did you downgrade the APPO units as well or just the ABO
>> > units? We are thinking we only need to downgrade the ABO units but
>> > we may be incorrect with this assumption.
>> >
>> > Any insight on the process(es) used by others to allow you to
>> > successfully downgrade your firmware would be greatly appreciated.
>> >
>> > Thanks much.
>> >
>> >
>> >
>> > Jack
>> >
>> > The PART-15.ORG smartBridges Discussion List
>> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>> > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED]
>> > (in
>>
>> > the body type unsubscribe smartBridges)
>> > Archives: http://198.63.203.6
>> >
>> >
>> > The PART-15.ORG smartBridges Discussion List
>> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>> > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED]
>> > (in the body type unsubscribe
>> > smartBridges)
>> > Archives: http://198.63.203.6
>> >
>> The PART-15.ORG smartBridges Discussion List
>> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>> smartBridges <yournickname> To Remove:
>mailto:[EMAIL PROTECTED] (in
>> the body type unsubscribe
>>
>smartBridges)
>> Archives: http://198.63.203.6
>>
>>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type
>subscribe smartBridges <yournickname> To Remove:
mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6
