Yes, locked to APPO (ESSID set) with MAC 0000000000. It seems to be about once a week for all customers. Dirty power perhaps? Lately that seems to have been my answer to a lot of things. Maybe the smartBridges need a better voltage regulator on board.
Cheers, Paul ----- Paul C. Murdock [EMAIL PROTECTED] mobile/801.864.1024 - fax/801.446.0130 www.paulmurdock.com - for more info >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Scott Pilz >Sent: Wednesday, June 04, 2003 8:53 AM >To: [EMAIL PROTECTED] >Subject: RE: [smartBridges] Firmware Downgrade > > > > Are you locked to BSSID/SSID, what AP's do you guys use? > > And, how often is this happening, once a month, twice a >month (?) > > > Scott > >On Wed, 4 Jun 2003 [EMAIL PROTECTED] wrote: > >> Yes.. Exactly same problems I have. with NEWEST firmware. >> >> cheers, >> Paul >> >> >> >> ----- >> Paul C. Murdock [EMAIL PROTECTED] >> mobile/801.864.1024 - fax/801.446.0130 >> www.paulmurdock.com - for more info >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of phantam >> Sent: Wednesday, June 04, 2003 8:36 AM >> To: '[EMAIL PROTECTED]' >> Subject: RE: [smartBridges] Firmware Downgrade >> >> >> >> True, ye I have noticed that the AB's still freeze occasionally or >> loose association according to clients they have to power >cycle every >> so often and then it works great. >> >> Chris >> >> -----Original Message----- >> From: Scott Pilz [mailto:[EMAIL PROTECTED] >> Sent: Wednesday, June 04, 2003 9:31 AM >> To: '[EMAIL PROTECTED]' >> >> >> Chris, what is freezing ? >> >> We've had about the same luck here with V:0.01.04.. I think >> the reason people are having problems with 0.01.04 is >primarily due to >> the fact they are setup and used to using a transparent bridge. I >> actually LIKE the changes in 0.01.04.. Less work when a customer >> decides to swap a NIC/WiFi card. >> >> Scott >> >> >> On Tue, 3 Jun 2003, phantam wrote: >> >> > What problems for gods sake I have 120 airBridges deployed >and guess >> what? >> > All with 1.5 firmware and it's working great , I can >monitor have no >> > problems except occasional freezing? Maybe this will be >fixed better >> in next >> > version. Even the power issue that everyone has been >having problems >> with >> > seems to be very seldomely apparent in my installs. Perhaps the >> problem >> > isn't entirely Smartbridges fault. >> > >> > Chris >> > >> > -----Original Message----- >> > From: Scott Damron [mailto:[EMAIL PROTECTED] >> > Sent: Tuesday, June 03, 2003 7:53 PM >> > To: [EMAIL PROTECTED] >> > >> > Yes, >> > >> > It don't work!!! I have tried it on 3 of the last "Indoor" >> > airbridges >> >> > we bought, after many problems with the newer firmware, >and it just >> > don't work!!! >> > >> > Scott >> > >> > -----Original Message----- >> > From: [EMAIL PROTECTED] >> > [mailto:[EMAIL PROTECTED] On Behalf Of Jack Berridge >> > Sent: Tuesday, June 03, 2003 11:57 AM >> > To: [EMAIL PROTECTED] >> > Subject: [smartBridges] Firmware Downgrade >> > >> > >> > Because of the lack of stability with current Smartbridges >AirBridge >> > Outdoor Firmware, we are going to begin downgrading our firmware to >> the >> > last stable release. Others have already done this. I'm >curious if >> > there are any quirks discovered while downgrading your >firmware from >> > the current >> > rev to the last stable rev? Where you able to successfully do this >> > "remotely" (although remote, we will still be on the same LAN >> broadcast >> > domain segment --- just not at each customers site)? >> > >> > Also, did you downgrade the APPO units as well or just the ABO >> > units? We are thinking we only need to downgrade the ABO units but >> > we may be incorrect with this assumption. >> > >> > Any insight on the process(es) used by others to allow you to >> > successfully downgrade your firmware would be greatly appreciated. >> > >> > Thanks much. >> > >> > >> > >> > Jack >> > >> > The PART-15.ORG smartBridges Discussion List >> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] >> > (in >> >> > the body type unsubscribe smartBridges) >> > Archives: http://198.63.203.6 >> > >> > >> > The PART-15.ORG smartBridges Discussion List >> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] >> > (in the body type unsubscribe >> > smartBridges) >> > Archives: http://198.63.203.6 >> > >> The PART-15.ORG smartBridges Discussion List >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> smartBridges <yournickname> To Remove: >mailto:[EMAIL PROTECTED] (in >> the body type unsubscribe >> >smartBridges) >> Archives: http://198.63.203.6 >> >> >The PART-15.ORG smartBridges Discussion List >To Join: mailto:[EMAIL PROTECTED] (in the body type >subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
