Alex, My thought on the mount is that it should have two arms to attch the radio to rather then just one arm. The metal is plenty heavy enough to hold the radio, but if there are two arms then there would be two bolts also which would be much more stable in the wind. I don't realy think a star washer is needed as there is already a lock washer included, but none the less we need to have lock washers for the bolts.
As for bending the bracket like Jason is talking about. That can be fixed by using a mount with a small mast which are not very expensive. We use some kind of mount on every install so that we can adjust the radio in every direction. It can be as simple as a piece of pipe and some clamps with a few lag bolts. We have a great mount that we use for the ABT. I belive we get it from EC. I can get a part # tomorrow from the office if anyone is interested. Thanks............Dan On Sat, 14 Jun 2003 14:07:20 -0400 "Jason" <[EMAIL PROTECTED]> wrote: > WAIT!!! Don't do that unless you have a new mounting > bracket as well. Since the bracket does not allow 3D > adjustments, bending the metal is the only current > option in some installations. > > Thank you for the responsiveness, nonetheless! > > Jason Szumlanski > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > Alex Wong > Sent: Saturday, June 14, 2003 1:56 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] TOTAL Mental Sheet > > Based on the feedback from many users, about metal > plates being a little too light, we will increase the > thickness of the metal plate for the TOTAL to make it > more robust. > > Any other suggestion are welcome. > > Alex > sB Tech Support > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
